基于毛细管电泳的环介导恒温扩增技术检测方法研究

以大肠杆菌(E.coli)为对象,采用环介导恒温扩增技术(LAMP)对其扩增,在实验室自制的毛细管电泳-诱导荧光平台上建立了LAMP产物的检测新方法。引物F3,B3,FIP,BIP扩增的E.coli LAMP产物大小为240 bp。优化的毛细管电泳条件为:毛细管有效长度/总长度(10 cm/15 cm),筛分介质溶液为0.5%羟乙基纤维素(1 300 K),电场强度(100 V/cm),进样条件(100 V/cm,1.0 s)。毛细管电泳时,DNA长度在100~500 bp范围内与其迁移时间呈线性关系,相关系数为0.996。在相同毛细管电泳条件下对E.coli LAMP产物进行分析,并利用这种线性关系在电泳图中对E.coli LAMP产物与假阳性产物做区分,结果表明,毛细管电泳技术不仅可在15 min内实现LAMP产物及附加产物的快速检测,而且可快速区分LAMP阳性及假阳性实验产物。采用建立的毛细管电泳快速检测LAMP产物的方法,对AB0174 E.coli基因实施了LAMP,结果表明该方法适合DNA LAMP产物的快速检测。     

基于生物芯片的核酸凝胶电泳仪

为克服传统平板凝胶电泳法操作步骤繁琐,实验时间长,以及采用紫外光源可能对人体造成伤害等缺陷,该文研制了一种基于电泳芯片的快速凝胶电泳仪,仅需DNA点样于电泳芯片后,将电泳芯片置于该电泳仪便可实现DNA样品快速分离及实时在线成像检测。以20、50、100 bp DNA ladder为检测对象,在仪器内对其分离效果进行验证及优化,其最佳电泳条件为电压100 V/cm,琼脂糖质量分数分别为2. 5%、1. 0%、1. 4%。结果表明在14 min内可以实现3种DNA样品的高效分离,DNA迁移距离与分子量的相关系数均高于0. 9,且该仪器具有较高的稳定性。     

基于PMMA毛细管电泳芯片的多位点突变检测研究

利用基于激光诱导荧光(LIF)检测的芯片毛细管电泳平台,批量制作了低成本聚甲基丙烯酸甲酯(PMMA)芯片,通过修饰管道,优化有效分离距离、分离介质等条件,可在90s内完成DNA片段的分离检测,实现单碱基分离,并在此平台上成功地对遗传性耳聋三个常见突变位点实现分型检测,为这种低成本的PMMA芯片应用于分型相关的临床诊断领域奠定了基础。     

整体式PDMS电泳芯片快速成型及高灵敏化学发光检测氨基酸

通过再铸模法将聚二甲基硅氧烷(PDMS)预聚物固化在由微细金属丝构成的微流体孔道的印模中,一次成型制作了整体式PDMS芯片.将所制作的芯片与化学发光检测器集成构建了微芯片毛细管电泳分析系统.初步考察了不经过衍生化时该系统分离检测氨基酸的性能.实验结果表明,精氨酸和天门冬氨酸在80s内完全分离,分离度为2.45,精氨酸的浓度检测限为3.50μmol/L.     

阵列式对电极介电电泳芯片及其用于细胞分离富集研究

基于介电电泳原理, 设计并制作了一种新型的能够用于细胞分离和富集的微流控介电电泳芯片. 该芯片由沉积有金电极的石英基片和带有微管道的聚二甲基硅氧烷(PDMS)盖片组成. 通过在管道底部布置间距不同的对电极阵列, 增大了正介电电泳力在管道中的有效作用范围, 能够在降低施加电压的同时, 实现对流动体系中细胞样品的捕获. 在3 V和3 MHz条件下, 该DEP芯片对人血红细胞的捕获效率达到83%; 进一步通过将肝癌细胞捕获在芯片电极上可实现对红细胞和肝癌细胞混合样品的分离, 在5 V和400 kHz条件下对肝癌细胞的捕获效率达到86%.     

聚二甲基硅氧烷毛细管电泳芯片电化学检测--快速测定对乙酰氨基酚及其水解产物

采用聚二甲基硅氧烷毛细管电泳微芯片安培检测法测定了对乙酰氨基酚及其水解产物对氨基酚.考察了缓冲溶液pH值、检测电位及分离电压的影响.以微铂电极为工作电极,在检测电位为o.8 V时,实现了对乙酰氨基酚和对氨基酚的快速分离,两者的线性范围均为10～500 μmol/L,检出限为5 μmol/L.     

基于芯片介电电泳的细胞特性分析及种类判断

基于微流控芯片介电电泳( Dielectrophoresis,DEP)原理和技术,在自行设计制作的抛物线电极结构的微流控介电电泳芯片上,采用芯片介电泳临界频率测定法,选择缓冲液电导率为200～1000 μS/cm,激发电压为5V,分别对红细胞(RBC)、白细胞(WBC)和死活HepG2肝癌细胞的临界频率进行了测试,检测...     

柱端安培检测毛细管电泳芯片及其初步应用

采用两步蚀刻技术制作集成工作电极导管的毛细管电泳芯片,30 μm直径的碳纤维微电极通过导管与分离通道末端对齐和固定,芯片上还制作了阴极通道以固定电泳负极.以神经传递物质多巴胺(DA)和邻苯二酚(CA)表征制作的芯片,DA和CA测定的线性范围为5~200 μmol以及20~800 μmol,检测限分别是0.51和2.9 μmol(S/N=3).三种酚类的检测结果表明该芯片可应用于环境样品的分析.     

电场耦合法芯片电泳柱上电导检测特性研究

通过电场耦合作用对毛细管电泳柱上直流电导检测原理进行了分析, 利用带有双T结构检测池的玻璃和聚合物芯片对其特性进行了研究. 在电泳分离过程中, 电泳高电场通过检测通道耦合到出口的检测电极上并产生可被检测的电势差. 当导电性与支持电解质不同的组分谱带通过分离通道上的检测池时造成该电位差的变化, 该变化与溶液电导率、检测池长度和电场强度直接相关. 检测信号与基线相除得到的信号只和检测池中溶液的物理特征参数(电导率及电阻)有关. 用自制高阻抗信号转换系统可使芯片电泳电场强度提高到450 V/cm以上, 以1 mmol/L Tris-HCl为支持电解质, 在12 s内实现了K＋和Na＋的高重现性分离检测, 检出限达到5 μmol/L, 线性范围达两个数量级(10 μmol/L~2 mmol/L).     

限制性内切酶指纹-高效毛细管电泳激光诱导荧光法测定原核/真核质粒

采用线性聚丙烯酰胺修饰石英毛细管的高效毛细管电泳无胶筛分技术,对原核/真核质粒用不同限制性内切酶酶切,运用限制性内切酶指纹-高效毛细管电泳激光诱导荧光(REF-HPCE-LIF)检测法同时对内切酶酶切后多个和较长DNA片段进行了检测,电泳缓冲液为1×TBE(pH8.3),阴极电压进样(10kV,5s),分离电压13kV,25℃,激光诱导荧光检测器检测(λex=520nm)。结果表明,所建立的REF-HPCE-LIF方法可对原核/真核酶切后多个和较长DNA片段进行检测,获得了满意的限制性内切酶指纹图谱,能够检测片段大小相差不超过10bp。所建立的方法较琼脂糖电泳分辨率高,可应用在检测多个和较长DNA片段的突变,在诊断肿瘤方面有一定应用前景。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.