Additive assisted hydrothermal synthesis,characterization and optical properties of one dimensional DyPO4:Ce3+ nanostructures

One dimensional nanostructures of cerium doped dysprosium phosphate (DyPO₄:Ce³⁺) were synthesized via hydrothermal route in the presence of different surfactants [sodium dodecyl sulfate (SDS), dodecyl sulfosuccinate (DSS), polyvinyl pyrollidone (PVP)] and solvent [ethylene glycol and water]. The prepared nanostructures were characterized by Powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), UV-VIS-NIR absorption spectrophotometer and photoluminescence (PL) studies. The PXRD and FTIR results indicate purity, good crystallinity and effective doping of Ce³⁺ in nanostructures. SEM and TEM micrographs display nanorods, nanowires and nanobundles like morphology of DyPO₄:Ce³⁺. Energy-dispersive X-ray spectra (EDS) of DyPO₄:Ce³⁺nanostructures confirm the presence of dopant. UV-VIS-NIR absorption spectra of prepared compounds are used to calculate band gap and explore their optical properties. Luminescent properties of DyPO₄:Ce³⁺ was studied by using PL emission spectra. The effect of additives and solvents on the uniformity, morphology and optical properties of the nanostructures were studied in detail.     

Synthesis, characterization and photoluminescence properties of Ce3+-doped ZnO-nanophosphors

The present study involves the synthesis of Ce³⁺ doped ZnO nanophosphors by the zinc nitrate and cerium nitrate co-precipitation method. The synthesized nanophosphors were characterized with respect to their crystal structure, crystal morphology, particle size and photoluminescence (PL) properties using X-ray diffraction (XRD), scanning electron microscopy (SEM)/energy dispersive X-ray (EDX), transmission electron microscopy (TEM)/Energy-dispersive X-ray spectroscopy (EDS) and PL-spectroscopy respectively. XRD results revealed that ZnO nanophosphors are single phase and cubic type structures. Further, PL spectra of ZnO:Ce³⁺ nanophosphors showed green emission because of the charge transfer at single occupied oxygen vacancies with ZnO holes and red emission due to the cerium ion transitions. Intensity and fine structure of the Ce³⁺ luminescence and its temperature dependence are strongly influenced by the doping conditions. The formation of ZnO:Ce³⁺ nanophosphors was confirmed by Fourier transform infrared (FTIR) and XRD spectra.     

Unique Spectral Overlap and Resonant Energy Transfer between Europium(II) and Ytterbium(III) Cations: No Quantum Cutting

Samples of the Ca₃Sc₂Si₃O₁₂ (CSS) host singly doped with Eu²⁺ or Yb³⁺, doubly doped with Eu²⁺ and Yb³⁺, and triply doped with Ce³⁺, Eu²⁺ and Yb³⁺ were synthesized by a sol–gel combustion process under reducing conditions. Unlike previous reports of Eu²⁺→Yb³⁺ energy transfer in other systems, the energy transfer is resonant in the CSS host and the transfer efficiency reaches 100 % for lightly doped samples. The transfer mechanism is multipolar rather than electron transfer for the sample compositions employed herein. The emission intensity of Yb³⁺ is further enhanced by co‐doping with Ce³⁺ in addition to Eu²⁺. The quantum efficiencies of the doped materials range between 9 % and 93 %.     

Monodisperse Mesocrystals of YF3 and Ce3+/Ln3+ (Ln=Tb,Eu) Co‐Activated YF3: Shape Control Synthesis,Luminescent Properties,and Biocompatibility

A family of monodisperse YF₃, YF₃:Ce³⁺ and YF₃:Ce³⁺/Ln³⁺ (Ln=Tb, Eu) mesocrystals with a morphology of a hollow spindle can be synthesized by a solvothermal process using yttrium nitrate and NH₄F as precursors. The effects of reaction time, fluorine source, solvents, and reaction temperature on the synthesis of these mesocrystals have been studied in detail. The results demonstrate that the formation of a hollow spindle‐like YF₃ can be ascribed to a nonclassical crystallization process by means of a particle‐based reaction route in ethanol. It has been shown that the fluorine sources selected have a remarkable effect on the morphologies and crystalline phases of the final products. Moreover, the luminescent properties of Ln³⁺‐doped and Ce³⁺/Ln³⁺‐co‐doped spindle‐like YF₃ mesocrystals were also investigated. It turns out that Ce³⁺ is an efficient sensitizer for Ln³⁺ in the spindle‐like YF₃ mesocrystals. Remarkable fluorescence enhancement was observed in Ce³⁺/Ln³⁺‐co‐doped YF₃ mesocrystals. The mechanism of the energy transfer and electronic transition between Ce³⁺ and Ln³⁺ in the host material of YF₃ mesocrystals was also explored. The cytotoxicity study revealed that these YF₃‐based nanocrystals are biocompatible for applications, such as cellular imaging.     

Preparation and luminescence properties of Ce and/or Tb doped LaPO4 nanofibers and microbelts by electrospinning

Ce³⁺ and/or Tb³⁺ doped LaPO₄ nanofibers and microbelts have been prepared by a combination method of sol-gel process and electrospinning. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), low voltage cathodoluminescence (CL) and time-resolved emission spectra as well as kinetic decays were used to characterize the resulting samples. SEM and TEM results indicate the as-formed precursor fibers and belts are smooth, and the as-prepared nanofibers and microbelts consist of nanoparticles. The doped rare-earth ions show their characteristic emission under ultraviolet excitation, i.e. Ce³⁺ 5d-4f and Tb³⁺⁵D₄-⁷F_J (J=6-3) transitions, respectively. The energy transfer process from Ce³⁺ to Tb³⁺ in LaPO₄:Ce³⁺, Tb³⁺ nanofibers was further studied by the time-resolved emission spectra. Under low-voltage electron beam excitation, LaPO₄:Ce³⁺, Tb³⁺ microbelt phosphors have a higher intensity than that of nanofiber phosphors.     

Structural, optical and photocatalytic studies of Fe doped ZnS nanoparticles

Fe doped ZnS nanoparticles (Zn_1?xFe_xS; where x = 0.00, 0.03, 0.05 and 0.10) were synthesized by a chemical precipitation method. The synthesized products were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, ultraviolet–visible and photoluminescence spectrometer. The X-ray diffraction and transmission electron microscope studies show that the size of crystallites is in the range of 2–10 nm. Photocatalytic activities of ZnS and 3, 5 and 10 mol% Fe doped ZnS were evaluated by decolorization of methylene blue in aqueous solution under ultraviolet and visible light irradiation. It was found that the Fe doped ZnS bleaches methylene blue much faster than the undoped ZnS upon its exposure to the visible light as compared to ultraviolet light. The optimal Fe/Zn ratio was observed to be 3 mol% for photocatalytic applications.     

The effect of Ce3+ cations on polyaniline morphology and electric properties

Polyaniline (PANI) is synthesized in the potentiostatic pulse mode from an electrolyte containing Ce₂(SO₄)₃. Cations Ce³⁺ are incorporated into the polymer composition during PANI redox transformations. It is shown that PANI in its conducting and dielectric forms contains different amounts of Ce³⁺ cations. Starting with the beginning of polymerization, the Ce³⁺ cations actively form the special polymer morphology as demonstrated by SEM images. The chief consequence of the formation of so well-developed uniform nanostructure is that the latter allows the dopant anions, cations, and protons to easily enter and leave it. This, in turn, results in the high electrochemical activity of this polymer and enhances the conductivity of PANI samples doped with Ce³⁺ cations as compared with those doped with only protons.     

Controlled synthesis and characterization of LaPO4, LaPO4:Ce3+ and LaPO4:Ce3+, Tb3+ by EDTA assisted hydrothermal method

LaPO₄, LaPO₄:Ce³⁺ and LaPO₄:Ce³⁺, Tb³⁺ particles with different morphologies and sizes have been successfully synthesized via a simple EDTA assisted hydrothermal method. The effects of the doping components, pH value, and the chelating reagent on the phases, structures and morphologies were well investigated by means of X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Photoluminescent (PL) spectra and kinetic decays were used to characterize the fluorescent properties of the samples. The results reveal that all the samples are of high purity and assigned to the single-crystalline monoclinic structure of LaPO₄ phase. The aspects ratio of the nanostructures synthesized in acid synthetic condition is larger than those obtained in alkaline solution. Additionally, the Ce³⁺ or/and Tb³⁺ doped LaPO₄ particles show less smoother surface compared with pure LaPO₄. Furthermore, the tendency for anisotropic growth under hydrothermal conditions can be simply enhanced by selecting the chelating ligands (EDTA). The possible growth mechanism of the LaPO₄:Ln³⁺ (Ln = Ce³⁺, Tb³⁺) nanostructures has been proposed as well. Upon ultraviolet excitation, LaPO₄:Ce³⁺ and LaPO₄:Ce³⁺, Tb³⁺ phosphors show the characteristic 5d–4f emissions of Ce³⁺ and ⁵D₄–⁷F_j (j = 6–3) emission lines of Tb³⁺, respectively.     

Structure and optical properties of cerium(III)-doped PbWO4 micro-crystals synthesized by a facile wet chemical method

Cerium(III) doped PbWO₄ micro-crystals with different doping contents were synthesized via a facile wet chemical method in air atmosphere at room temperature. X-ray diffraction patterns of as-synthesized powders revealed that these micro-crystals were pure scheelite PbWO₄, without any impurities such as Ce₂(WO₄)₃ and PbO, and Ce³⁺ could enter into Pb²⁺ sites, which would induce the formation of lead vacancies in the PbWO₄ crystal lattice. The UV–vis diffuse reflection spectra, Raman spectra and photoluminescence (PL) spectra of doped and pure PbWO₄ micro-crystals were studied in detail, which indicated that optical properties of doped PbWO₄ were greatly changed. The adsorption edge of Ce(III)-doped PbWO₄ micro-crystals would shift toward high wavelength (red-shift) with gradually increasing Ce³⁺ doping concentration. It shows an obvious decrease in blue emission band which made the shape of the whole emission band remodeled with the Ce³⁺ doping.     

Hydrothermal synthesis of core-shell structured PS@GdPO<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript>/Ce<Superscript>3+</Superscript> spherical particles and their luminescence properties

Non-aggregated spherical polystyrene (PS) particles were coated with GdPO₄:Tb³⁺/Ce³⁺ phosphor layers by a conventional hydrothermal synthesis using poly(vinylpyrrolidone) (PVP) as an additive without further annealing treatment. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL), as well as luminescence decay experiments were used to characterise the resulting core-shell structured PS@GdPO₄:Tb³⁺/Ce³⁺ samples. The results of XRD indicated that the PS particles were successfully coated with the GdPO₄:Tb³⁺/Ce³⁺ phosphor layers, which could be further verified by the images of FESEM. Under ultraviolet excitation, the PS@GdPO₄:Tb³⁺/Ce³⁺ phosphors show Tb³⁺ characteristic emission, i.e. ⁵D₄-⁷F_J (J = {6, 5, 4, 3}) emission lines with green emission ⁵D₄-⁷F₅ (543 nm) as the most prominent group. The core-shell phosphors so obtained have potential applications in field emission display (FED) and plasma display panels (PDP).     

Electrochemical properties of polyaniline film doped by Ce3+ cation

Electrochemical Synthesis (ES)of polyaniline (PAni) is carried out in the presence in electrolyte (1 M H₂SO₄) of cerium (III) sulfate under potentiostatic and potentiodynamic modes. It is shown that Ce³⁺ cations in electrolyte catalyze ES, i.e. accelerate both ES variants. The obtained polymers were characterized using the scanning electron microscopy (SEM) technique and also on the basis of the calculation of electrochemical characteristics. Relaxation in PAni polymers doped by the Ce³⁺ cation occurs several times faster than in proton-doped PAni. The minimum change in ΔE and E is observed in polymers doped by Ce³⁺ cations during the electrochemical cycling of PAni and PAni-Ce at high rates.     

Synthesis of Multifunctional Mn‐Doped CdTe/ZnS Core/Shell Quantum Dots

The synthesis of a novel water‐soluble Mn‐doped CdTe/ZnS core‐shell quantum dots using a proposed ultrasonic assistant method and 3‐mercaptopropionic acid (MPA) as stabilizer is descried. To obtain a high luminescent intensity, post‐preparative treatments, including the pH value, reaction temperature, reflux time and atmosphere, have been investigated. For an excellent fluorescence of Mn‐doped CdTe/ZnS, the optimal conditions were pH 11, reflux temperature 100°C and reflux time 3 h under N₂ atmosphere. While for phosphorescent Mn‐doped CdTe/ZnS QDs, the synthesis at pH 11, reflux temperature 100°C and reflux time 3 h under air atmosphere gave the best strong phosphorescence. The characterizations of Mn‐doped CdTe/ZnS QDs were also identified using AFM, IR, powder XRD and thermogravimetric analysis. The data indicated that the photochemical stability and the photoluminescence of CdTe QDs are greatly enhanced by the outer inorganic ZnS shell, and the doping Mn²⁺ ions in the as‐prepared quantum dots contribute to strong luminescence. The strong luminescence of Mn‐doped CdTe/ZnS QDs reflected that Mn ions act as recombination centers for the excited electron‐hole pairs, attributing to the transition from the triplet state (⁴T₁) to the ground state (⁶A₁) of the Mn²⁺ ions. All the experiments demonstrated that the surface states played important roles in the optical properties of Mn‐doped CdTe/ZnS core‐shell quantum dots.     

Synthesis and luminescent properties of rare-earth-doped CeO2–CaF2 solid solutions via chemical solution routes

CeO₂–CaF₂ solid solutions were synthesized by a chemical solution method starting from metal acetates, trifluoroacetic acid as a fluorine source, and anhydrous ethanol as a solvent. Precursor gels, which were obtained by drying the resultant ethanolic solution at 110 °C, were heat-treated at a temperature in the range 400–1000 °C in air to obtain powdery products. Elemental analysis by energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy revealed that heating products actually contained cerium, calcium, oxygen, and fluorine. According to X-ray diffraction analysis, possible reaction pathways under high-temperature treatments were considered as initial formation of fluorides (CeF₃ and CaF₂), subsequent oxidation of Ce³⁺ to Ce⁴⁺ in air, and final conversion to fluorite-type Ce–Ca–O–F solid solutions. Doping of Eu³⁺ or Sm³⁺ ions in the solid solutions led to occurrence of their characteristic photoluminescence due to intra-configurational f–f electronic transitions. Photo-excitation was achieved by irradiation with near ultraviolet light mainly through charge transfer from O²⁻ to Ce⁴⁺ in the solid solutions and subsequent energy transfer to the doped ions. Spectral structures of photoluminescence suggested the occupation of Eu³⁺ or Sm³⁺ in Ce⁴⁺ sites with inversion symmetry in the solid solutions.     

Electrospinning preparation and properties of NaGdF4:Eu3+ nanowires

Eu³⁺ doped NaGdF₄ (NaGdF₄:Eu³⁺) nanocrystals in hexagonal crystal phase were prepared by a polyol method, and the size and morphology controllable NaGdF₄:Eu³⁺/PVP nano-composite fibers were obtained through the electrospinning technique, and then the NaGdF₄:Eu³⁺ nanowires were obtained by followed annealing. By changing the ratio of PVP to NaGdF₄ as well as the calcination temperature, the optimal conditions for synthesizing the NaGdF₄ nanowires were obtained, and the structural properties of the synthesized sample were characterized by powder X-ray diffraction (XRD) patterns and field emission scanning electron micrographs (SEM) images. The luminescent properties of the NaGdF₄:Eu³⁺ nanocrystals and nanowires were also studied in this paper. We observed that the luminescent intensity of NaGdF₄:Eu³⁺ nanowires was greatly increased compared to the annealed NaGdF₄:Eu³⁺ nanocrystals at the same temperature.     

Analysis of Dopant Atom Distribution and Quantification of Oxygen Vacancies on Individual Gd‐Doped CeO2 Nanocrystals

This work reports the analysis of the distribution of Gd atoms and the quantification of O vacancies applied to individual CeO₂ and Gd‐doped CeO₂ nanocrystals by electron energy‐loss spectroscopy. The concentration of O vacancies measured on the undoped system (6.3±2.6 %) matches the expected value given the typical Ce³⁺ content previously reported for CeO₂ nanoparticles. The doped nanoparticles have an uneven distribution of dopant atoms and an atypical amount of O vacant sites (37.7±4.1 %). The measured decrease of the O content induced by Gd doping cannot be explained solely by the charge balance including Ce³⁺ and Gd³⁺ ions.     

Photo and Thermo‐luminescence Properties of Mn4+, Ce4+ and Sm3+ in MgAl2Si2O8 Phosphor

Mn⁴⁺, Ce⁴⁺ and Sm³⁺ doped MgAl₂Si₂O₈‐based phosphors were synthesized at 1300 °C by solid state reaction and characterized by thermogravimetry (TG), differential thermal analysis (DTA), X‐ray powder diffraction (XRD), photoluminescence (PL), thermoluminescence (TL) and scanning electron microscopy (SEM). The phosphors showed broad red emission bands in the range of 610–715 nm and different maximum intensity when activated by UV illumination. Such a red emission can be attributed to the intrinsic ²E→⁴A₂ transitions of Mn⁴⁺.     

Enhancing Photoactivity of TiO2(B)/Anatase Core–Shell Nanofibers by Selectively Doping Cerium Ions into the TiO2(B) Core

Cerium ions (Ce³⁺⁾ can be selectively doped into the TiO₂(B) core of TiO₂(B)/anatase core–shell nanofibers by means of a simple one‐pot hydrothermal treatment of a starting material of hydrogen trititanate (H₂Ti₃O₇) nanofibers. These Ce³⁺ ions (≈0.202 nm) are located on the (110) lattice planes of the TiO₂(B) core in tunnels (width≈0.297 nm). The introduction of Ce³⁺ ions reduces the defects of the TiO₂(B) core by inhibiting the faster growth of (110) lattice planes. More importantly, the redox potential of the Ce³⁺/Ce⁴⁺ couple (E°(Ce³⁺/Ce⁴⁺)=1.715 V versus the normal hydrogen electrode) is more negative than the valence band of TiO₂(B). Therefore, once the Ce³⁺‐doped nanofibers are irradiated by UV light, the doped Ce³⁺ ions—in close vicinity to the interface between the TiO₂(B) core and anatase nanoshell—can efficiently trap the photogenerated holes. This facilitates the migration of holes from the anatase shell and leaves more photogenerated electrons in the anatase nanoshell, which results in a highly efficient separation of photogenerated charges in the anatase nanoshell. Hence, this enhanced charge‐separation mechanism accelerates dye degradation and alcohol oxidation processes. The one‐pot treatment doping strategy is also used to selectively dope other metal ions with variable oxidation states such as Co^2+/3+ and Cu^+/2+ ions. The doping substantially improves the photocatalytic activity of the mixed‐phase nanofibers. In contrast, the doping of ions with an invariable oxidation state, such as Zn²⁺, Ca²⁺, or Mg²⁺, does not enhance the photoactivity of the mixed‐phase nanofibers as the ions could not trap the photogenerated holes.     

Low temperature synthesis and luminescence investigations of YAG:Ce,Eu nanocomposite powder for warm white light-emitting diode

The preparation of the cerium and europium co-doped YAG materials as well as the study for their synthesis and emitting mechanism of the energy transfer between Ce³⁺ and Eu³⁺ were investigated in the present study. YAG:Ce³⁺, Eu³⁺ powders were synthesized using a high-energy ball milling method in different sintering temperature and atmosphere: air and H₂/N₂. The effects of the synthesis procedure on the crystallinity, morphology, structure, and luminescence spectra were examined by X-ray diffraction, field emission-scanning electron microscopy, and photoluminescence spectroscopy. The europium co-doped YAG:Ce³⁺ phosphors is improved the chromaticity coordinates.     

Energy Transfer from Ce3+ to Tb3+/Dy3+/Mn2+ in Ca9Ga(PO4)7 Phosphors: Synthesis,Structure and Tunable Multicolor Luminescent Properties

A series of Ca₉Ga(PO₄)₇:Ce³⁺/Tb³⁺/Dy³⁺/Mn²⁺ phosphors with tunable color, in which Ce³⁺ acts as the sensitizer, was synthesized. Energy transfer (ET) from Ce³⁺ to Tb³⁺/Dy³⁺/Mn²⁺ was investigated in detail. Tb³⁺/Dy³⁺/Mn²⁺ single-doped Ca₉Ga(PO₄)₇ can exhibit green, yellow, and red emission, respectively. Incorporating Ce³⁺ into a Tb³⁺/Dy³⁺/Mn²⁺ single-doped Ca₉Ga(PO₄)₇ phosphor can remarkably promote the luminous efficiency of the Tb³⁺/Dy³⁺/Mn²⁺ ions. This enhancement originates from an efficient ET from Ce³⁺ to Tb³⁺/Dy³⁺/Mn²⁺. The ET was validated by luminescence spectra, decay dynamics, and schematic energy levels. Moreover, the intensity ratio of red emission of Mn²⁺ to violet emission of Ce³⁺ was analyzed based on energy-transfer and lifetime measurements. In Ce³⁺-Tb³⁺, Ce³⁺-Dy³⁺, and Ce³⁺-Mn²⁺ doped Ca₉Ga(PO₄)₇, the emitting color changed from violet to green, yellow, and red, respectively, which indicates the potential use of this new tunable phosphor in UV light-emitting diodes.     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。