Light induced fading associated with the application of OSL to personal dosimetry

Al₂O₃:C is the best material example that presents OSL response and adequate dosimetric behaviour for OSL dosimetry. It was the first commercial material manufactured for use in personal monitoring based on an OSL reader system from Landauer. The purpose of this paper was to report the results of optical fading experiments for the nanoDot commercial OSL detectors (Al₂O₃:C), provided by Landauer Inc. Five groups of different experimental conditions were formed with all detectors, exposing them to fluorescent and semiconductor light sources and to sun light. The loss of OSL signal when the detectors are kept open, was verified, which was already expected, but a loss in the OSL signal even when the detectors are exposed to light and covered with the manufacturer plastic protection are also revealed. The results show also that the use of Mylar filters can delay the OSL fading of the detectors.     

Emergency EPR dosimetry technique using vacuum-stored dry nails

Human finger- and toenails have been tested with an X-band EPR technique for different conditions of nail storage. The main radiation-induced signal at g = 2.005 demonstrated good stability if the samples were stored in a vacuum at room temperature after nail harvesting and irradiation. On the basis of this phenomenon, a new protocol is proposed to use the nails as possible emergency EPR dosimeters. The dosimetry protocol was tested on laboratory-exposed samples and demonstrated the ability to recover doses in the region 0–10 Gy with an estimated uncertainty of approximately 0.3–0.4 Gy for doses in the range <2 Gy, increasing to 0.6–0.7 Gy for doses in the range 5–10 Gy.     

Using the OSL single-aliquot regenerative-dose protocol with quartz extracted from building materials in retrospective dosimetry

We report on the application of the single-aliquot regenerative-dose (SAR) protocol to the optically stimulated luminescence signal from quartz extracted from fired bricks and unfired mortar in retrospective dosimetry. The samples came from a radioactive materials storage facility, with ambient dose rates of about 0.1 mGy/h. A detailed dose-depth profile was analysed from one brick, and compared with dose records from area TL dosemeters. Small-aliquot dose-distributions were analysed from the mortar samples; one associated with the exposed brick, and one from a remote site exposed only to background radiation. We conclude that unfired materials have considerable potential in retrospective dosimetry.