Estimation of aspect ratio of cellulose nanocrystals by viscosity measurement: influence of surface charge density and NaCl concentration

Cellulose nanocrystals (CNCs) with similar size and various surface charge densities were prepared by sulfuric acid hydrolysis and NaOH desulfation. The influence of surface charge density and NaCl concentration on the intrinsic viscosity of CNC suspensions and predicted aspect ratio were investigated by Ubbelohde viscometer. With decreased CNC surface charge density, the intrinsic viscosity initially decreased due to the electric double layers on the CNC surface and subsequently increased due to CNC aggregation. To screen electroviscous effect, NaCl was added into CNC suspensions. With increased NaCl concentration, the intrinsic viscosity of CNC suspensions first decreased and then increased. The aspect ratios of CNCs predicted by Batchelor equation from the minimum intrinsic viscosity were consistent with that measured by transmission electron microscopy. Suspensions of CNCs with higher surface charge density needed less NaCl to obtain minimum intrinsic viscosity. The NaCl content that should be added to the suspension to predict the actual physical aspect ratio of CNC can be estimated by Debye–Hückel theory, assuming that the Debye length is equal to the CNC diameter.     

A DFT study of H<Subscript>2</Subscript>CO and HCN adsorptions on 3<Emphasis Type="Italic">d</Emphasis>, 4<Emphasis Type="Italic">d</Emphasis>, and 5<Emphasis Type="Italic">d</Emphasis> transition metal-doped graphene nanosheets

The binding of 3d (Sc, Ti, V), 4d (Y, Zr, Nb), and 5d (La, Hf, Ta) transition metals on graphene nanosheet (TM–GNS) with hydrogen-terminated edges and the adsorption of H₂CO and HCN molecules on the pristine and TM-doped GNSs were theoretically studied using a density functional theory method. The calculation showed that all TM atoms had strong binding with GNS, in which the Ta atom displayed the strongest interaction with GNS. The H₂CO and HCN molecules showed much stronger adsorption on the TM–GNSs than that on the pristine GNS. The H₂CO showed stronger interactions with TM–GNSs than that of HCN, in which the Ta-doping displayed the strongest interactions between the GNS and H₂CO or HCN. The adsorption interactions induced dramatic changes of TM–GNS electronic properties. The results revealed that the adsorption strength and sensor ability of GNS can be greatly improved by introducing appropriate TM dopants. Therefore, TM-doped GNSs are suitable for application in H₂CO and HCN storage and sensor.     

Nitrogen monoxide storage and sensing applications of transition metal–doped boron nitride nanotubes: a DFT investigation

The structural properties, electronic properties, and adsorption abilities for nitrogen monoxide (NO) molecule adsorption on pristine and transition metal (TM = V, Cr, Mn, Nb, Mo, Tc, Ta, W, and Re) doping on B or N site of armchair (5,5) single-walled boron nitride nanotube (BNNT) were investigated using the density functional theory method. The binding energies of TM-doped BNNTs reveal that the Mo atom doping exhibits the strongest binding ability with BNNT. In addition, the NO molecule weakly interacts with the pristine BNNT, whereas it has a strong adsorption ability on TM-doped BNNTs. The increase in the adsorption ability of NO molecule onto the TM-doped BNNTs is due to the geometrical deformation on TM doping site and the charge transfer between TM-doped BNNTs and NO molecule. Moreover, a significant decrease in energy gap of the BNNT after TM doping is expected to be an available strategy for improving its electrical conductivity. These observations suggest that NO adsorption and sensing ability of BNNT could be greatly improved by introducing appropriate TM dopant. Therefore, TM-doped BNNTs may be a useful guidance to be storage and sensing materials for the detection of NO molecule.

     

Hybrid fluorescent nanoparticles from quantum dots coupled to cellulose nanocrystals

Carboxylated cellulose nanocrystals (CNCs) were decorated with CdSe/ZnS quantum dots (QDs) using a carbodiimide chemistry coupling approach. The one-step covalent modification was supported by nanoscale imaging, which showed QDs clustered on and around the CNCs after coupling. The QD–CNC hybrid nanoparticles remained colloidally stable in aqueous suspension and were fluorescent, exhibiting the broad excitation and narrow emission profile characteristic of the QDs. QD–CNCs in nanocomposite films imparted strong fluorescence within CNC-compatible matrices at relatively low loadings (0.15 nmol QDs/g of dry film), without altering the overall physical properties or self-assembly of the CNCs. The hybrid QD–CNCs may find applications in nanoparticle tracking, bio-imaging, optical/sensing devices, and anti-counterfeit technologies.     

The influence of chitin nanocrystals on structural evolution of ultra-high molecular weight polyethylene/chitin nanocrystal fibers in hot-drawing process

Ultra-high molecular weight polyethylene (UHMWPE)/chitin nanocrystal (CNC) fibers were prepared. Compared with the pure UHMWPE fibers, the ultimate tensile strength and Young’s modulus of UHMWPE/CNC fibers are improved by 15.7% and 49.6%, respectively, with the addition of chitin nanocrystals (CNCs) of 1 wt%. The melting temperature (T _m) of UHMWPE/CNC fibers was higher than that of pure UHMWPE fibers. Pure UHMWPE fibers and UHMWPE/CNC fibers were characterized with respect to crystallinity, orientation and kebab structure by wide-angle X-ray diffraction (WAXD), small-angle X-ray scattering (SAXS) and scanning electron microscopy (SEM). It is found that the CNCs act as the shish structure in UHMWPE/CNC fibers and the kebab crystals are grown around the CNCs. There was almost no difference between pure UHMWPE fibers and UHMWPE/CNC fibers in orientation. But the degree of crystallinity of various stages of UHMWPE/CNC fibers was respectively higher than the corresponding stage of pure UHMWPE fibers. Moreover, the addition of 1 wt% CNCs improved the thickness of kebab crystals and accelerated the transformation of kebab to shish.     

Host–Guest Chemistry Within Cellulose Nanocrystal Gel Receptors

Cellulose nanocrystals (CNCs) spontaneously assemble into gels when mixed with a polyionic organic or inorganic salt. Here, we have used this ion-induced gelation strategy to create functional CNC gels with a rigid tetracationic macrocycle, cyclobis(paraquat-p-phenylene) ( CBPQT ⁴⁺). Addition of [ CBPQT ]Cl₄ to CNCs causes gelation and embeds an active host inside the material. The fabricated CNC gels can reversibly absorb guest molecules from solution then undergo molecular recognition processes that create colorful host–guest complexes. These materials have been implemented in gel chromatography (for guest exchange and separation), and as elements to encode 2- and 3-dimensional patterns. We anticipate that this concept might be extended to design a set of responsive and selective gel-like materials functioning as, for instance, water-pollutant scavengers, substrates for chiral separations, or molecular flasks.     

Tough nanocomposite hydrogels from cellulose nanocrystals/poly(acrylamide) clusters: influence of the charge density,aspect ratio and surface coating with PEG

Cellulose-derived materials are usually characterized by sophisticated structures, leading to unique and multiple functions, which have been a source of inspiration for the fabrication of a wide variety of nanocomposites. Cellulose nanocrystals/poly(acrylamide) (CNCs/PAM) nanocomposite hydrogels were synthesized via in situ polymerization in the CNC suspension. The cellulose from pulp fiber under different sulfuric acid hydrolysis conditions, examined by conductometric titration and transmission electron microscopy, was applied to study how the effects of the surface charge and aspect ratio affect CNCs’ mechanical reinforcement in nanocomposites. The results indicated that the higher surface charge concentration resulted in better dispersibility in aqueous suspension, leading to a more efficient energy dissipation process. The CNC reinforcement behavior followed the percolation model where the greater aspect ratio of CNC contributed to higher mechanical properties. The preferential adsorption of poly(ethylene glycol) (PEG) on the CNC surface was characterized by zeta potential measurements where the fracture strength and fracture elongation of nanocomposites decreased with increasing PEG concentration. The adsorption of PEG on the CNC surface occupied the active sites for polymer chain propagation, which hindered the PAM cross-linking effect on the CNC surface and decreased the cross-linking density of the network.     

Host–Guest Chemistry Within Cellulose Nanocrystal Gel Receptors

Cellulose nanocrystals (CNCs) spontaneously assemble into gels when mixed with a polyionic organic or inorganic salt. Here, we have used this ion‐induced gelation strategy to create functional CNC gels with a rigid tetracationic macrocycle, cyclobis(paraquat‐p‐phenylene) ( CBPQT ⁴⁺). Addition of [ CBPQT ]Cl₄ to CNCs causes gelation and embeds an active host inside the material. The fabricated CNC gels can reversibly absorb guest molecules from solution then undergo molecular recognition processes that create colorful host–guest complexes. These materials have been implemented in gel chromatography (for guest exchange and separation), and as elements to encode 2‐ and 3‐dimensional patterns. We anticipate that this concept might be extended to design a set of responsive and selective gel‐like materials functioning as, for instance, water‐pollutant scavengers, substrates for chiral separations, or molecular flasks.     

Poly(ε-caprolactone) (PCL)/cellulose nano-crystal (CNC) nanocomposites and foams

Poly(ε-caprolactone) (PCL)/cellulose nanocrystal (CNC) nanocomposites were produced via twin-screw extrusion. Microcellular nanocomposite samples were produced with microcellular injection molding using carbon dioxide (CO₂) as physical blowing agent. The foaming behavior, physical properties, thermal properties, crystallization behavior, and biocompatibility were investigated. It was found that the CNCs interacted with the PCL matrix which led to a strong interface. The CNCs effectively acted as nucleation agents in microcellular injection molding. Both solid and foamed samples with higher levels of CNC content showed higher tensile moduli, complex viscosities, and storage moduli due to the reinforcement effects of CNCs. Furthermore, improvement in the foamed samples was more significant due to their fine cell structure. The addition of CNCs caused a reduction of the decomposition temperature and an increase in the glass transition temperature, crystallization temperature, and crystallinity of PCL. Moreover, the biocompatibility of the foamed nanocomposites with low CNC content was verified by 3T3 fibroblast cell culture.     

Modification of cellulose nanocrystal-reinforced composite hydrogels: effects of co-crosslinked and drying treatment

The synthesis platform of composite hydrogels containing rigid reinforcing filler cellulose nanocrystals (CNCs) and polymer matrix polyacrylamide (PAM) has been proposed (Yang et al. in Cellulose 20:227–237, 2013). The features of CNCs as multifunctional crosslinkers and flexible polymer chain entanglements contributed to the unique arrangement of CNC/PAM clusters with reversible network structures. In this article, the chemical crosslinking agent N,N′-methylene-bisacrylamide (BIS) was added to obtain the dual crosslinked networks, and the mechanical properties of the resulting co-crosslinked hydrogels were examined by tailoring the CNC and BIS concentrations. The results indicated that the homogeneous dispersion of CNCs throughout the polymer matrix was disturbed in the presence of BIS, and the covalent crosslinkers led to weakness and brittleness of the hydrogels. Some new entanglements within the networks were formed after a simple drying treatment, which was verified by the greater tensile strength compared with the as-prepared ones. The mechanism for the formation of these new entanglements was ascribed to the irreversible rearrangement of the CNC/PAM network structure, whereas for co-crosslinked hydrogels no strength increment was observed after the drying treatment.     

Cellulose nanocrystals obtained from microcrystalline cellulose by p-toluene sulfonic acid hydrolysis,NaOH and ethylenediamine treatment

Cellulose nanocrystals (CNCs) were first isolated from microcrystalline cellulose (MCC) by p-toluene sulfonic acid (p-TsOH) hydrolysis. Cellulose II nanocrystal (CNC II) and cellulose III nanocrystal (CNC III) were then formed by swelling the obtained cellulose I nanocrystal (CNC I) in concentrated sodium hydroxide solutions and ethylenediamine (EDA) respectively. The properties of CNC I, CNC II and CNC III were subjected to comprehensive characterization by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The results indicated that CNC I, CNC II and CNC III obtained in this research had high crystallinity index and good thermal stability. The degradation temperatures of the resulted CNC I, CNC II and CNC III were 300 °C, 275 °C and 242 °C, respectively. No ester bonds were found in the resulting CNCs. CNCs prepared in this research also had large aspect ratio and high negative zeta potential.

     

Curcumin-loaded PLGA-PEG-PLGA triblock copolymeric micelles: Preparation, pharmacokinetics and distribution in vivo

Rod-shaped cellulose nanocrystals (CNCs) were manufactured and used to reinforce polyacrylamide (PAM) hydrogels through in situ free-radical polymerization. The gelation process of the nanocomposite hydrogels was monitored on a rheometer using oscillatory shear. The chemical structure, morphology, swelling property, and compression strength of the formed gels were investigated. A possible mechanism for forming hydrogels was proposed. The results showed that CNCs accelerated the formation of hydrogels and increased the effective crosslink density of hydrogels. Thus CNCs were not only a reinforcing agent for hydrogel, but also acted as a multifunctional cross-linker for gelation. The shear storage modulus, compression strength and elastic modulus of the nanocomposite hydrogels were significantly improved because of good dispersion of CNCs in PAM as well as enhanced interfacial interaction between these two components. Among the CNC contents used, a loading of 6.7 w/w% led to the maximum mechanical properties for nanocomposite hydrogels.     

Stimuli‐responsive polyurethane bionanocomposites of poly(ethylene glycol)/poly(ε‐caprolactone) and [poly(ε‐caprolactone)‐grafted‐] cellulose nanocrystals

In this study, in situ polyurethane (PU) bionanocomposites of poly(ethylene glycol) (PEG)/poly(ε‐caprolactone) (PCL) polyols, bare cellulose nanocrystals (CNCs) and PCL‐grafted CNCs (G‐CNC) were synthesized with different contents of CNCs as cross‐linking agent to control the extent of phase separation. The effect of confining the chains between CNCs through urethane linkages and presence of PCL grafts on phase and crystallization behavior was evaluated. Crystallization and chemical networking were controlled to tune the shape fixity (SF) and recovery (SR) of the specimens, resulting in a SF of 100% for linear and PU nanocomposites of G‐CNC (0.5% and 1%) samples. The PU nanocomposite of G‐CNC (0.5%) was selected as the optimum sample with the highest SR of 100%. The effect of surface hydrophobicity on cellular behavior of Human Foreskin Fibroblast (as a normal cell) and HepG2 (as a cancerous cell) cells was evaluated. Cell adhesion analysis of the prepared samples indicated two different behaviors possibly due to the difference in the epigenetic nature of the cells and cellular integrin‐ based bonds showing a great potential for a variety of tissue engineering applications.     

表面官能团化增强碳纳米笼超级电容器性能

以具有多级孔结构、高比表面积、良好导电性等特征的碳纳米笼（CNCs）为前体,采用硝酸氧化法在CNCs表面引入含氧官能团。以CNCs为超级电容器电极材料,在相同电流密度下,官能团化样品的比电容显著高于纯CNCs;在1A·g^-1下比电容最高可达到255F·g^-1,比纯CNCs的188F·g^-1增加了34%,这表明表面含氧官能团化能够显著提高CNCs的超级电容器比电容。在100A·g^-1的大电流密度下,硝酸氧化后CNCs的比电容保持在111~167F·g^-1,表明具有良好的耐大电流充放电性能。在10A·g^-1的电流密度下循环10000圈后,CNC-6M样品的比电容由196F·g^-1下降到176F·g^-1,样品的比电容仍保留90%,具有良好的循环稳定性。表面含氧官能团化CNCs所表现出的这种优异的超级电容器性能归因于CNCs的多尺度分级孔结构、高比表面积、良好的导电性、表面亲水性含氧官能团化带来的浸润性提高和引入的赝电容。     

Dynamic rheology studies of in situ polymerization process of polyacrylamide–cellulose nanocrystal composite hydrogels

A series of dynamic small-amplitude oscillatory shear experiments for in situ polymerization process of polyacrylamide–cellulose nanocrystal (PAM–CNC) nanocomposite hydrogels were performed to investigate the relationship between rheological properties and synthesis parameters including chemical cross-linker concentration, polymerization temperature, initiator concentration, and CNC aspect ratios. The results showed that CNCs accelerated the onset of gelation (t _onset) and acted as a multifunctional cross-linker during the gelation reaction. The composite hydrogels exhibited enhanced steady-state elastic modulus ( G_￥￠ ) \left( {G_\infty^\prime } \right) and plateau loss factor (tanδ) compared to these of the pure PAM hydrogels, indicating that adding CNCs not only reinforced but also toughened PAM hydrogels. ( G_￥￠ ) \left( {G_\infty^\prime } \right) and the effective network junction density (N) increased with increased cross-linker concentration, polymerization temperature, and CNC aspect ratios, but decreased with increased initiator concentration. The changes of plateau tanδ were opposite to that of G_￥￠ G_\infty^\prime . The sol–gel transition kinetics of PAM–CNC hydrogels accelerated with increased cross-linker concentration and polymerization temperature and, however, reached optimization at 0.25 wt% of initiator concentration. CNCs with lower aspect ratios promoted t _onset and the sol–gel transition of PAM–CNC hydrogels, suggesting the fact that CNCs with lower aspect ratios further facilitated the formation of network of PAM–CNC nanocomposite hydrogels.     

Rheology,crystallization behavior,and mechanical properties of poly(butylene succinate-co-terephthalate)/cellulose nanocrystal composites

A series of biodegradable poly (butylene succinate-co-terephthalate) (PBST) with different aromatic units content was synthesized and then melt blended by adding cellulose nanocrystals (CNCs) to manufacture the full organic composites. A network-like structure of CNCs in PBST matrix was evaluated by rheometer. The storage modulus and complex viscosity at low frequency region were significantly enhanced with increasing CNC content. Meanwhile, the decreasing $\tan \delta$ and flow index were attributed to the excellent interaction between PBST and CNCs. When PBST has a content of the aromatic unit exceeds 30 mol%, the crystallization temperatures increased with increasing CNC contents. On the other hand, when PBST has 30 mol% content of the aromatic unit, the cold crystallization temperatures decreased with increasing CNC contents. These above observation in crystallization properties suggested that the CNC make a role of heterogeneous nucleation in PBST matrix. The result of mechanical properties evaluated by dynamic mechanical analysis showed a good reinforcement effect of the addition of stiff CNC. The PBST/CNC composites were suitable for cell growth and might have a potential as biomedical materials, which is confirmed by MTT assay.     

过渡金属掺杂铈中晶格氧的活化

采用密度泛函理论计算研究了在铈表面掺杂的过渡金属(TM)离子对表面晶格氧原子活化的影响.为此,测定了经TM离子修饰的CeO2最稳定(111)表面终端的结构和稳定性.除了保持八面体氧配位的锆和铂掺杂剂外, TM掺杂剂在取代表面Ce离子时更倾向于正方形平面配位.除了Pt(1.14 eV)和Zr(正方形平面配位不稳定)外,所有TM掺杂剂的表面结构从八面体到正方形平面都很容易.通常,四价TM阳离子的离子半径比Ce^4+的小得多,从而导致了显著的拉伸应变晶格,并解释了氧空位形成能量的降低.除Zr外,当产生一个氧空位时,优先形成正方形平面结构.热力学分析表明, TM掺杂CeO2表面在典型环境催化条件下存在氧缺陷.一个具有实际意义的例子是锆掺杂CeO2(111)中的晶格氧容易活化,从而有利于CO氧化.研究结果强调了晶格氧活化的本质和TM掺杂剂在TM-铈固溶催化剂中的优选位置.     

A novel amphotropic polymer based on cellulose nanocrystals grafted with azo polymers

A novel amphotropic polymer which could exhibit liquid-crystalline behavior both in the solvent and in the heating process was synthesized through azo polymers grafting from cellulose nanocrystals (CNCs). The CNCs, prepared by acid hydrolysis of filter paper, were characterized by Atomic Force Microscopy (AFM). Poly{6-[4-(4-methoxyphenylazo)phenoxy] hexyl methacrylate}(PMMAZO), which was a liquid-crystalline polymers (LCP), was successfully to graft from CNC via Atom transfer radical polymerization (ATRP). The structure and thermal properties of the PMMAZO-grafted CNC were investigated using Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analyses (TGA). Its phase structures and transitions were studied by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The experimental results showed that the PMMAZO-grafted CNC exhibited both types of liquid crystal formation, thermotropic and lyotropic.     

Effect of oligosaccharide deposition on the surface of cellulose nanocrystals as a function of acid hydrolysis temperature

Recent findings indicate there is only a small window of sulfuric acid concentration (60–65 %) and temperature (45–65 °C) which allows efficient extraction of cellulose nanocrystals in significant quantities from bleached chemical pulp. In the present report, we develop a systematic explanation for how hydrolysis temperature, at a specific acid concentration, governs CNC surface properties. We demonstrate that CNCs with different suspension viscosity, stability in electrolyte-containing solutions, and optical properties can be produced, based on the presence or not of a precipitated oligosaccharide layer (OSL) on the surface of the nanocrystals. At hydrolysis temperatures below 65 °C, the degree of polymerization (DP) distribution of cellulose chains in CNC samples exhibits a bimodal distribution, indicating an accumulation of oligosaccharides on the CNC surface which increases as the hydrolysis temperature is decreased. At low hydrolysis temperature (45 °C), the oligosaccharides dissolved in the strong acid phase have a DP between 7 and 20 and precipitate onto CNCs when the reaction is quenched by diluting with water. As the temperature of hydrolysis is increased (50–60 °C), the dissolved oligosaccharides are hydrolyzed faster and their DP decreases such that they remain soluble after quenching. At 65 °C, no precipitated oligosaccharides can be detected on the CNC surface. Based on these results, we propose possible explanations to account for the effects of the OSL on the CNC suspension viscosity and stability and on optical properties of CNC films.     

Inside Cover: Uniform Growth of Nanocrystalline ZIF-8 on Cellulose Nanocrystals: Useful Template for Microporous Organic Polymers (Angew. Chem. Int. Ed. 24/2023)

Zeolitic imidazolate framework (ZIF-8) nanocrystals were uniformly grown on the surface of cellulose nanocrystals (CNCs) to give a hybrid material, ZIF@CNCs. By varying the stoichiometry of the components, it was possible to control the size of the ZIF-8 crystals grown on the CNC surface. Optimized ZIF@CNC ( ZIF@CNC-2 ) was used as a template to synthesize a microporous organic polymer (MOP), ZIF@MOP@CNC . After etching the ZIF-8 with 6 M HCl solution, a MOP material with encapsulated CNCs ( MOP@CNC ) was formed. Zinc coordination into the porphyrin unit of the MOP yielded the ship-in-a-bottle structure, Zn MOP@CNC , comprised of CNCs encapsulated within the Zn-MOP. In comparison to ZIF@CNC-2 , Zn MOP@CNC showed better catalytic activity and chemical stability for CO₂ fixation, converting epichlorohydrin to chloroethylene carbonate. This work demonstrates a novel approach to create porous materials through CNC templating.