Enthalpies de melange du systeme antimoine-tellure a 909,30 K, 911,85 K et 917,95 K

Thermodynamical data on Sb-Te system at 909,30 K, 911,85 K and 917,95 K. The integral molar enthalpies of formation of liquid Sb-Te alloys were measured at three temperatures by drop calorimetry.Partial molar enthalpies of formation of these alloys, referring to the pure liquid constituants, and enthalpie of formation at 298 K of the compound Sb₄₀₅Te₅₉₅ were deduced.

---

Zusammenfassung Thermodynamische Daten, des Systemes Sb-Te bei 909,30, 911,85 und 917,95 K. Mittels Drop-Kalorimetrie wurden die integralen molaren Bildungsenthalpien von flüssigen Sb-Te Legierungen bei drei verschiedenen Temperaturen gemessen. Die partiellen molaren Bildungsenthalpien dieser Legierungen, bezogen auf die reinen flüssigen Komponenten sowie die Bildungsenthalpie der Verbindung Sb_0.405Te_0.595 bei 298 K wurden abgeleitet.

---

Sb-Te 909,30; 911,85 917,95 . , Sb_0.4050.595 298 .

     

Determination of the kinetic parameters of the multi-stage thermal decomposition of solids under non-isothermal conditions by the non-linear estimation approach

The activation energy of decomposition of aluminium hydroxidevs. weight loss was estimated from thermogravimetric data collected over a wide range of heating rates, without resorting to the model of the reaction mechanism.These activation energy values were subsequently used to distinguish individual dehydration stages and to determine the best models of the reaction kinetics for these stages.Finally, the overall decomposition model was formulated, and its parameters were determined by the non-linear estimation approach.

---

Zusammenfassung Die Aktivierungsenergie der Zersetzung von Aluminiumhydroxid wurde in Abhängigkeit vom Gewichtsverlust aus einen weiten Bereich von Aufheizgeschwindigkeiten umfassenden thermogravimetrischen Daten gesammelt, ohne auf das Modell des Reaktionsmechanismus einzugehen.Diese Werte der Aktivierungsenergien wurden daraufhin zur Unterscheidung einzelner Dehydratisierungsstufen und zur Bestimmung der besten Modelle der Reaktionskinetik dieser Stufen eingesetzt.Schließlich wurde ein allgemeines Zersetzungsmodell formuliert und seine Parameter durch nichtlineare Schätzungsnäherung bestimmt.

---

Résumé On a estimé l'énergie d'activation de la décomposition de l'oxyde d'aluminium en fonction de la perte de poids à partir de données thermogravimétriques obtenues avec un large intervalle de vitesses de chauffage, sans avoir recours au modèle du mécanisme de la réaction. On a utilisé ensuite ces valeurs de l'énergie d'activation pour distinguer les étapés individuelles de la déshydratation et pour déterminer les meilleurs modèles de cinétique réactionnelle correspondant à celles-ci.Enfin, on a formulé un modèle général de décomposition et déterminé ces paramètres par approximations non linéaires.

---

, , . . .

     

The reaction of copper(I) sulphide with a product of its oxidation copper(II) sulphate

The course of the reaction between copper(I) sulphide and copper(II) sulphate in SO₂ at 710–785 K was studied by the TG method under isothermal and non-isothermal conditions, as well as by the DTA method, X-ray analysis and scanning electron microscopy. It was established that the reaction is essentially dependent upon the initial composition of the substrate mixture, Cu₂SO₂ and Cu₂SO₂ being the chief intermediates in the reaction. Copper(I) oxide appears as the permanent final product of the reaction of interest. The reaction network, with the intermediate stages depending on the initial compositions in the temperature range studied, has been demonstrated.

---

Zusammenfassung Der Verlauf der Reaktion von Kupfer(I)-sulfid mit Kupfer(II)-sulfat wurde in SO₂ bei 710–785 K durch isotherme und nichtisotherme Thermogravimetrie sowie DTA, Röntgenanalyse und Scanning-Elektronenmikroskopie untersucht. Es wurde festgestellt, daß die Reaktion wesentlich von der Ausgangszusammensetzung des Substratgemisches abhängt, wobei Cu₂SO₂ und Cu₂SO₄ die vorherrschenden intermediären Produkte der Reaktion sind. Kupfer(I)-oxid tritt als Endprodukt auf. Der die intermediären, im untersuchten Temperaturbereich von der Ausgangszusammensetzung abhängigen Reaktionsschritte in sich einschließende Reaktionsverlauf wird dargelegt.

---

710–785 , , . , . Cu₂SO₂ Cu₂SO₄, . , .

     

[Fe(phen)3]2+ aquation in aqueous polyacrylamide solution

The aquation of tris(1, 10-phenanthroline) iron(II) has been studied in aqueous polyacrylamide solutions. The rate increases up to 2.8 times at low polymer concentrations, and subsequently decreases. These effects are attributed to changes in the local water activity in the region of the complex.

---

(1, 10-) (II) . 2,8 , . .

     

Utilization of the affine transformation of thermoanalytical curves for the determination of kinetic parameters

A method is suggested for the affine transformation of thermoanalytical curves, by means of which their comparison with one another becomes feasible. It is demonstrated that the results obtained by the traditional methods of non-isothermal kinetics depend on the heating rate, whereas the results attained by affine transformation are independent of the heating rate. They are consistent with the results obtained by Merzhanov's dmethod, which is also a non-aprioristic method.

---

Zusammenfassung Eine Methode zur Affintransformierung thermoanalytischer Kurven wird vorgeschlagen, wodurch ihr Vergleich miteinandere rmöglicht wird. Es wird gezeigt, daß die durch traditionelle Methoden der nicht-isothermen Kinetik erhaltenen Ergebnisse von der Aufheizgeschwindigkeit abhängig sind, während die durch Affintransformierung erhaltenen von der Aufheizgeschwindigkeit unabhängig sind. Sie sind in Übereinstimmung mit den nach der Methode von Merzhanov erhaltenen Ergebnissen, die ebenfalls eine nicht-aprioristische Methode ist.

---

Résumé On propose une méthode pour la transformation affine des courbes d'analyse thermique, qui permet leur comparaison. On montre que les résultats obtenus par les méthodes traditionnelles de cinétique non-isotherme dépendent de la vitesse du chauffage, tandis que les résultats obtenus par la transformation affine n'en dépendent pas. Ils sont en accord avec les résultats de la méthode de Merzhanov.

---

, . , , , , , , . , , .

     

On the mechanism of propylene oxidation over gallium-molybdenum oxide catalysts

The products of selective oxidation are shown to be formed via a stepwise mechanism with participation of surface allylic complexes. A successive transformation of -allyl to -allyl and further to acrolein is possible. The products of complete oxidation may be formed through surface carbonate-carboxylate complexes via either a stepwise mechanism involving the catalyst's oxygen, or a concerted mechanism with the participation of molecular oxygen.

---

, . - -, . - , .

     

Gas phase photoreaction of SO2 with n-pentane in the presence of NO

The spectrum of an intermediate, ascribed to nitrosopentane, has been detected in the photolysis of SO₂-pentane-NO mixtures. This may be explained by a radical photolysis mechanism involving an initial H-atom abstraction from the pentane molecule by SO₂.

---

SO₂--NO , . , H .

     

Quantum-chemical study of the optical properties of MgO surface hydroxy groups

Cluster models of MgO surface OH groups have been studied by the semi-empirical CNDO method. The calculated stretching vibration frequencies of OH bonds and localized electron excitation energies on the OH-groups are shown to depend on the oxygen atom coordination.

---

OH- MgO. , OH- , OH-, .

     

Chemical,dehydration, differential thermal and X-ray analysis of Salal bauxite deposits

Chemical, dehydration, differential thermal and X-ray analysis data on four samples of mineral deposits from the Salal region (J & K) have been determined to assess their mineral compositions. All the samples appear to be kaolinitic in character, though in association with other mineral impurities, such as boehmite, diaspore and dickite, in varying proportions.

---

Zusammenfassung Vier Proben von Minerallagerstätten der Salal-Region (J & K) wurden chemisch sowie mittels DTA und röntgenographischer Analyse untersucht, um ihre Mineralzusammensetzung zu ermitteln. Alle Proben sind dem Charakter nach kaolinitisch, allerdings in unterschiedlichen Verhältnissen mit anderem mineralischem Material wie Boehmit, Diaspor und Dickit verunreinigt.

---

, , , . , - , .

---

---

The authors are grateful to the Head of the Department of Physics, Jammu University, for his interest in the research programme.     

Studies on the catalytic oxidation of propylene on ferric molybdate

Ferric molybdate is less selective in the partial oxidation of propylene than bismuth molybdate. Its catalytic behavior is similar to that observed on other transition metal molybdates. The intrafacial nature of the reaction is established through kinetic and adsorption measurements.

---

, . . .

     

Energy dissipation and selectivity in the catalytic oxidation of ammonia

A qualitative interpretation of selectivity changes in ammonia oxidation, based on considerations of energy dissipation processes is presented.

---

, .

     

Precipitation of iron catalysts for the Fischer-Tropsch synthesis

The batch Fischer-Tropsch wise precipitation of iron catalysts for the synthesis in the pH range of 4.60 to 7.91 is described in detail. Each step of the precipitation has been controlled by measurements of the relevant parameters to produce definite catalysts. Factors influencing the reproducibility are shortly discussed.

---

- pH=4,60–7,91. . , .

     

Thermal and spectral studies on some tetrachloroaurates of 8-alkyltheophylline derivatives

Tetrachloroaurates of 8-ethyl-, 8-isopropyl-, 8-propyl- and 8-pentyltheophylline were synthesized and studied by¹H-NMR, TG and DSC techniques. The metal is not coordinated to the 8-alkyltheophylline derivatives and forms a salt-like structure.

---

Zusammenfassung Tetrachloroaurate von 8-Äthyl-, 8-Isopropyl-, 8-Propyl- und 8-Pentyltheophillin wurden synthetisiert und mittels¹H-NMR, TG und DSC untersucht. Die 8-Alkyltheophillin-Derivate sind nicht koordinativ an das Metall gebunden, es liegt vielmehr eine salzartige Struktur vor.

---

8--, 8--, 8-- 8- , . , 8- .

     

Measurement of the specific heat and heat of decomposition of a polymer composite to high temperatures

The specific heat and heat of decomposition of a glass-filled phenolformaldehyde (phenolic) resin have been determined from experimental data obtained using a simultaneous thermal analyzer capable of operation to 1500 C. The measurements were conducted on powdered samples of the polymer to temperatures of approximately 1050 C at a rate of 20 deg min^–1 in an argon atmosphere. Both the mass loss and energetics were measured for the virgin component of the material, while only the energetics were measured for the char component. The combination of these data was used to calculate the specific heat of the virgin, char, and decomposing material, as well as the heat of decomposition. Also, in order to establish the accuracy of the instrument, the specific heat of pyroceram 9606 was measured and compared to previously published values.

---

Zusammenfassung Die spezifische Wärme und die Zersetzungswärme eines glasgefüllten Phenol-Formaldehyd-Harzes wurden aus experimentellen Daten bestimmt, die mittels eines simultanen ThermoanalyseGerätes für Arbeiten bis 1500 C gewonnen wurden. Die Messungen wurden an gepulverten Polymerproben bis zu Temperaturen von 1050 C mit einer Aufheizgeschwindigkeit von 20 K min^–1 in Argonatmosphäre durchgeführt. Massenverlust und Energieänderungen wurden für das jungfräuliche Material gemessen, die Energieänderung auch für das verkohlte Material. Zur Prüfung der Messgenauigkeit des Geräts wurde die spezifische Wärmekapazität von Pyroceram 9606 gemessen und mit früher publizierten Daten verglichen.

---

, 1500, () . 1050 20/. , — . , , . 9606, .

---

---

On sabbatical leave from the University of Rhode Island, Kingston, Rhode Island 02881 U.S.A.     

Heats of adsorption of CO2 and NH3 on natural mordenites

The heats of adsorption of CO₂ and NH₃ were studied for sodium, lithium, calcium and decationized forms of natural mordenites. The exchange of Na⁺ for Ca²⁺ leads to increasing adsorption heats at low coverages. For CO₂ the region of elevated heats corresponds to the formation of Ca²⁺ ... CO₂ adsorption complexes. Two molecules of NH₃ probably interact with each Ca²⁺ ion (or with the Li⁺ ions in Li-mordenite). The heats of adsorption of NH₃ on decationized mordenite are much higher than those on calcium mordenite.

---

Zusammenfassung Adsorptionswärmen von CO₂ und NH₃ an der Na-, Li-, Ca- und dekationisierten Form von natürlichem Mordenit wurden bestimmt. Der Austausch von Na⁺ gegen Ca²⁺ führt zu einer Erhöhung der Adsorptionswärmen bei geringen Bedeckungen. Bei CO₂ erfolgt im Bereich hoher Adsorptionswärmen die Bildung des Adsorptionskomplexes Ca²⁺ ...CO₂. Mit jedem Ca²⁺-Ion (bzw. Li⁺-Ion im Li-Mordenit) treten wahrscheinlich zwei NH₃-Moleküle in Wechselwirkung. An dekationisiertem Mordenit sind die Adsorptionswärmen von NH₃ höher als an Ca-Mordenit.

---

, , . . Ca²⁺ ... CO₂. B , , ( -). , -.

---

---

The authors would like to thank Dr. I. A. Belitsky for supplying the sample of natural mordenite. They also thank Professor S. P. Zhdanov for his interest and encouragement of this work.     

Ru(III) catalyzed oxidation of some aliphatic alcohols by N-bromosuccinimide (NBS). A kinetic study

Kinetics of Ru(III) catalyzed oxidation of methanol, ethanol, n-propanol, n-butanol, isopropanol and iso-butanol by N-bromosuccinimide (NBS) in the presence of Hg(II) acetate have been studied in acid medium. The oxidation exhibits a fractional order in [alcohol] and first order in [NBS]. The applicability of Taft's equation was tested. The probable mechanism is discussed.

---

, , -, -, - () Hg(II), Ru(III), . . . .

     

Kinetics of methane conversion over microspherically grained nickel-alumina catalysts

Kinetics of methane conversion in a fluidized bed of microspherically grained nickel-alumina catalyst has been studied at pressures from 0.3 to 3.1 MPa. The rate equation shows that the reaction is inhibited by H₂O.

---

0,3 3,1 . , .

     

Products of V2O5?MoO3 catalyst reduction with benzene in the absence of oxygen

In the products of V₂O₅–MoO₃ catalyst reduction with benzene in the absence of oxygen, carbon monoxide and carbon dioxide were detected in all the reduction region of the catalyst. Maleic anhydride is formed at the beginning of the reduction (first several pulses), and p-benzoquinone was detected in some experiments at the very beginning (in the first few pulses). The remaining products, which were detected in catalytic oxidation of benzene, such as phenol, hydroquinone, biphenyl and acrylic acid, were absent in all the reduction region.

---

V₂O₅–MoO₃ - . ( ) , , - , -. , , , , , .

     

Chemical oscillations in the uncatalyzed bromate oxidation of hydroquinone and nitrophenols

Chemical oscillatory behavior in the uncatalyzed bromate oxidation of hydroquinone and nitrophenols is reported. The reaction is strongly inhibited by stirring. Effect of one-electron redox couples (EZ catalysts) on the system is described.

---

. . - ( EZ) .

     

Effect of carbon support on the hydrogen sorption of platinum

The hydrogen sorption of carbon-supported platinum catalysts, studied by the potentiodynamic method, differs significantly from that of unsupported platinum. The difference depends on the preparation method and on the nature of the support. Possible explanations are suggested as (i) some kind of interaction between metal and support atoms during impregnation, (ii) high dispersity (amorphous structure) and (iii) hydrogen spillover onto the carbon support.

---

Pt/C, . . (I) , (II) ( ), (III) .