Stereoregularity of poly(α-methylvinyl alkyl ether)s determined by 1H- and 13C-NMR spectroscopy

α-Methylvinyl methyl ether, ethyl ether, and isobutyl ether were polymerized under various polymerization conditions and the structure of the polymers was determined by ¹H- and ¹³C-NMR spectroscopy. α-Methyl and β-methylene carbon spectra of poly(α-methylvinyl isobutyl ether) showed splitting and were analyzed by triad and tetrad sequences. β-Methylene carbon spectra of poly(α-methylvinyl ethyl ether) also showed splitting. When Eu(fod)₃ was added, α-methyl and methoxy proton spectra in benzene of poly(α-methylvinyl methyl ether) showed splitting assigned to triad tacticities. All the polymers obtained in polar solvents exhibited an increase in syndiotacticity. The polymerization mechanism is discussed.     

13C nuclear magnetic resonance studies on the stereochemical configurations of 2,4-dimethoxypentane and poly(alkyl vinyl ethers)

¹³C nuclear magnetic resonance (CMR) spectra were obtained for 2,4-dimethoxypentane, which is a model compound of poly(methyl vinyl ether), and the effects of the solvent and temperature on the chemical shifts were investigated. CMR spectra of poly-(alkyl vinyl ethers) were also determined and analyzed. The diad tacticities were obtained from β-methylene carbon resonances of poly(methyl vinyl ether), poly(ethyl vinyl ether), and poly(isobutyl vinyl ether), but not from those of poly(isopropyl vinyl ether) and poly(tert-butyl vinyl ether). The methoxyl carbon resonance of poly(methyl vinyl ether) and the ethoxyl methylene carbon resonance of poly(ethyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively. The α-methine and quaternary carbon resonances of poly(tert-butyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively.     

Polymerization of vinyl ethers with transition‐metal catalysts: An examination of the stereoregularity of the formed polymers

The polymerization of isobutyl vinyl ether (IBVE) and tert‐butyl vinyl ether (TBVE) was carried out with metallocene and nonmetallocene catalysts, and the stereoregularity of the formed polymers was examined with ¹³C NMR spectroscopy. IBVE afforded polymers with 63–68% dyad isotacticity by polymerization with mixtures of metallocene catalysts and methyl aluminoxane as a cocatalyst in toluene as a solvent. However, TBVE yielded polymers with 47–52% dyad isotacticity (21–28% triad isotacticity) under the same conditions, the isotacticity being lower than that of poly(isobutyl vinyl ether) (PIBVE). Nonmetallocene catalysts, including Ti, Zr, and Hf complexes with two phenoxy imine chelate ligands, provided PIBVE and poly(tert‐butyl vinyl ether) with 63–68 and 45–51% dyad isotacticity, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3938–3943, 2002     

Synthesis of biocompatible and biodegradable block copolymers of polyvinyl alcohol‐block‐poly(ε‐caprolactone) using metal‐free living cationic polymerization

Applications of metal‐free living cationic polymerization of vinyl ethers using HCl · Et₂O are reported. Product of poly(vinyl ether)s possessing functional end groups such as hydroxyethyl groups with predicted molecular weights was used as a macroinitiator in activated monomer cationic polymerization of ε‐caprolactone (CL) with HCl · Et₂O as a ring‐opening polymerization. This combination method is a metal‐free polymerization using HCl · Et₂O. The formation of poly(isobutyl vinyl ether)‐b‐poly(ε‐caprolactone) (PIBVE‐b‐PCL) and poly(tert‐butyl vinyl ether)‐b‐poly(ε‐caprolactone) (PTBVE‐b‐PCL) from two vinyl ethers and CL was successful. Therefore, we synthesized novel amphiphilic, biocompatible, and biodegradable block copolymers comprised polyvinyl alcohol and PCL, namely PVA‐b‐PCL by transformation of acid hydrolysis of tert‐butoxy moiety of PTBVE in PTBVE‐b‐PCL. The synthesized copolymers showed well‐defined structure and narrow molecular weight distribution. The structure of resulting block copolymers was confirmed by ¹H NMR, size exclusion chromatography, and differential scanning calorimetry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5169–5179, 2009     

Stereoregularity of poly(methyl acrylate)

The stereoregularity of poly(methyl acrylate) and poly(methyl acrylate-αd) was determined from the NMR spectra. A method of quantitative determination of stereoregularity of poly(methyl acrylate) proposed in this paper is based on the fact that in the 100 Mc./sec. NMR spectrum the absorption peaks due to methylene protons in syndiotactic configurations overlap absorptions due to only one of two methylene protons in isotactic configurations. The stereostructure of poly(methy1 acrylates) polymerized with anionic catalysts such as Grignard reagents, n-butyllithium, and LiAlH₄ is generally richer in isotactic diads than in syndiotactic diads. For example, poly(methyl acrylate) polymerized with phenylmagnesium bromide as catalyst at ?20°C. consists of 99% isotactic and 1% syndiotactic diads. In radical polymerization, the isotacticity of poly(methyl acrylate) is independent of polymerization temperature. Poly(methyl acrylates) polymerized with a Ziegler-Natta catalyst consisting of Al(C₂H₅)₂Cl and VCl₄ have configurations similar to those polymerized by radical initiators. The stereoregularity of poly(methyl acrylate-α-d) resembled that of poly(methyl acrylate) polymerized under the same conditions.     

Radiation-Induced Degradation of a Series of Poly(vinyl Ethers)

The degradative effects of γ-radiation on diethyl ether solutions of poly(alkyl vinyl ethers) under a variety of conditions were studied by polymer molecular weight measurements. Poly(methyl vinyl ether) (PMVE), poly(ethyl vinyl ether) (PEVE), poly(isopropyl vinyl ether) (PIPVE), and poly(isobutyl vinyl ether) (PIBVE) exhibited similar degradative behavior, with G_(SC) values between 0.3 and 0.9 scissions/100 eV at 0°C. Chemically polymerized and radiation-polymerized PEVE samples gave comparable results. Chain degradation was much more pronounced for samples of poly(tert-butyl vinyl ether) (PTBVE) which yielded a G_(SC) value of 3.6 at 0°C. Degradation experiments conducted on PEVE in air resulted in significantly higher rates of scission: G_(SC) = 5.6 scissions/100 eV at 0°C. Chain scission was not measurably influenced by changing the solvent from diethyl ether to di-isopropyl ether. Increased polymer concentration was found to reduce the rate of polymer degradation.     

Anionic polymerization of vinyl monomers with xanthates

The polymerization of vinyl monomers with various xanthates (potassium tert-butylxanthate, potassium benzylxanthate, zinc n-butylxanthate, etc.) were carried out at 0°C in dimethylformamide. N-Phenylmaleimide, acrylonitrile, methyl vinyl ketone, and methyl methacrylate were found to undergo polymerization with potassium tert-butylxanthate; however, styrene, methyl acrylate, and acrylamide were not polymerized with this xanthate. In the anionic polymerization of methyl vinyl ketone with potassium tert-butylxanthate, the rate of the polymerization was found to be proportional to the catalyst concentration and to the square of the monomer concentration. The activation energy of methyl vinyl ketone polymerization was 2.9 kcal/mole. In the polymerization, the order of monomer reactivity was as follows: N-phenylmaleimide > methyl vinyl ketone > acrylonitrile > methyl methacrylate. The initiation ability of xanthates increased with increasing basicity of the alkoxide group and with decreasing electronegativity of the metal ion in the series, lithium, sodium, and potassium tert-butylxanthate. The relative effects of the aprotic polar solvents on the reactivity of potassium tert-butylxanthate was also determined as follows: diethylene glycol dimethyl ether > dimethylsulfoxide > hexamethylphosphoramide > dimethylformamide > tetrahydrofuran (for methyl vinyl ketone); dimethyl sulfoxide > hexamethylphosphoramide > dimethylformamide ? diethylene glycol dimethyl ether (for acrylonitrile).     

Vanadium alkoxide catalyzed polymerization of vinyl chloride

The polymerization of vinyl chloride (VC) with vanadium complex/alkylaluminum catalyst was investigated. In the case of polymerization with vanadium oxytriethoxide (VO(OEt)₃), poly(vinyl chloride) was obtained in a good yield. The effect of cocatalyst, solvent, and cocatalyst/precatalyst ratio was observed. The structure of the polymer obtained with VO(OEt)₃/i‐Bu₃Al catalyst consisted of regular head‐to‐tail sequence and isobutyl chain‐end structure. VO(OEt)₃/alkylaluminum catalyst was able to copolymerize VC with styrene, 1‐butene, methyl methacrylate, and methyl acrylate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of temperature and solvents on stereospecific polymerization of vinyl alkyl ethers catalyzed by aluminum sulfate–sulfuric acid complex

The effect of polymerization temperature and solvents was determined on the crystallinity of polymers of vinyl isobutyl ether and of vinyl n-butyl ether prepared with aluminum sulfate–sulfuric acid complex catalyst. Principally, the methyl ethyl ketone (MEK)-insoluble fractions of these polymers were used for characterization. Density, per cent crystallinity by x-ray diffraction, infrared ratio, and dilatometric volume contraction of these polymer fractions were used as criteria of crystallinity. The MEK-insoluble fractions of poly(vinyl n-butyl ethers) prepared in carbon disulfide in the temperature range of ?30 to +25°C did not show any significant difference in the values of the above crystallinity parameters. The polymer obtained at 50°C. was less crystalline than the rest of the polymers. The MEK-insoluble fractions of poly(vinyl isobutyl ethers) prepared at 0–50°C. in carbon disulfide and n-heptane solvents also did not significantly differ in their degree of crystallinity. They were, however, decidedly less crystalline than the MEK-insoluble fractions of the corresponding polymers obtained at ?20°C. These data a indicate that on increasing the temperature of polymerization the crystallinity of the polymers was either unchanged or decreased slightly. The polymerizations of vinyl n-butyl ether and vinyl isobutyl ethers were also carried out in binary mixtures of carbon disulfide with n-heptane, chlorobenzene, and MEK. Generally, increasing the concentration of carbon disulfide increased the inherent viscosities of polymers as well as the weight percentage of their MEK-insoluble fractions. The MEK-insoluble fraction of poly(vinyl isobutyl ether) prepared in carbon disulfide-MEK mixture (volume ratio 2:1) was isotactic and highly crystalline. Likewise, the MEK-insoluble fractions of two polymers of vinyl n-butyl ether prepared in MEK itself were also isotactic and highly crystalline. Compared to poly(tetramethylene oxide), these latter fractions exhibited less dependence of rate of crystallization upon temperature. Consequently, at low degrees of supercooling they crystallize much more rapidly than does poly(tetramethylene oxide).     

Living cationic polymerization of vinyl ether with a cyclic acetal group

The living cationic polymerization of 5‐ethyl‐2‐methyl‐5‐(vinyloxymethyl)‐1,3‐dioxane ( 1 ), a vinyl ether with a cyclic acetal unit, was investigated with various initiating systems in toluene or methylene chloride at 0 to ?30 °C. With initiating systems such as hydrogen chloride (HCl)/zinc chloride (ZnCl₂), isobutyl vinyl ether–acetic acid adduct [CH₃CH(OiBu)OCOCH₃]/tin tetrabromide (SnBr₄)/di‐tert‐butylpyridine (DTBP), and CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride (Et_1.5AlCl_1.5)/ethyl acetate (CH₃COOEt), the number‐average molecular weights (M_n's) of the obtained poly( 1 )s increased in direct proportion to the monomer conversion and produced polymers with relatively narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.2–1.3]. To investigate the living nature of the polymerization with CH₃CH(OiBu)OCOCH₃/SnBr₄/DTBP, a second monomer feed was added to the almost polymerized reaction mixture. The added monomer was completely consumed, and the M_n values of the polymers showed a direct increase against the conversion of the added monomer, indicating the formation of a long‐lived propagating species. The glass transition temperature and thermal decomposition temperature of poly( 1 ) (e.g., M_n = 13,600, M_w/M_n = 1.30) were 29 and 308 °C, respectively. The cyclic acetal group in the pendants of the polymer of 1 could be converted to the corresponding two hydroxy groups in a 65% yield by an acid‐catalyzed hydrolysis reaction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4855–4866, 2007     

Effects of orientation on dynamic shear behavior of some amorphous polymers from 4.2° to 300°K

The dynamic shear behavior of four highly amorphous polymers in the unstretched and stretched states (draw ratios 3:1 to 6:1) was investigated with a torsion pendulum at temperatures from 4.2°K to 180–300°K and frequencies from 0.4 to 3.2 cps. The polymers studied were polystyrene, poly(vinyl acetate), poly(vinyl propionate), and poly(isobutyl vinyl ether). Previously unreported loss maxima were found at 48°K (1.5 cps) and 149°K (1.3 cps) for poly(vinyl proplonate), at 10°K (1.0 cps) for poly(vinyl acetate) and at 9°K (1.6 cps) for poly(isobutyl vinyl ether). Uniaxial orientation increased the shear storage modulus G, measured with the torsion axis parallel to the stretch direction and caused changes in the loss peaks which depended on the polymer material studied.     

Preparation and properties of poly(alkyl vinyl ether-2-ethyl-2-oxazoline) diblock copolymers

A method for the synthesis of well-defined poly(alkyl vinyl ether–2-ethyl-2-oxazoline) diblock copolymers with hydrolytically stable block linkages has been developed. Monofunctional poly(alkyl vinyl ether) oligomers with nearly Poisson molecular weight distributions were prepared via a living cationic polymerization method using chloroethyl vinyl ether together with HI/ZnI₂ as the initiating system and lithium borohydride as the termination reagent. Using the resultant chloroethyl ether functional oligomers in combination with sodium iodide as macroinitiators, 2-ethyl-2-oxazoline was polymerized in chlorobenzene/NMP to afford diblock copolymers. A series of poly(methyl vinyl ether–2-ethyl-2-oxazoline) diblock materials were found to have polydispersities of ≈ 1.3–1.4 and are microphase separated as indicated by two T_g's in their DSC thermograms. These copolymers are presently being used as model materials to study fundamental parameters important for steric stabilization of dispersions in polar media. © 1993 John Wiley & Sons, Inc.     

Well‐defined amphiphilic graft copolymer consisting of hydrophilic poly(acrylic acid) backbone and hydrophobic poly(vinyl acetate) side chains

A series of well‐defined amphiphilic graft copolymers containing hydrophilic poly(acrylic acid) (PAA) backbone and hydrophobic poly(vinyl acetate) (PVAc) side chains were synthesized via sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization followed by selective hydrolysis of poly(tert‐butyl acrylate) backbone. A new Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromopropanoyloxy)methyl) acrylate, was first prepared, which can be polymerized via RAFT in a controlled way to obtain a well‐defined homopolymer with narrow molecular weight distribution (M_w/M_n = 1.08). This homopolymer was transformed into xanthate‐functionalized macromolecular chain transfer agent by reacting with o‐ethyl xanthic acid potassium salt. Grafting‐from strategy was employed to synthesize PtBA‐g‐PVAc well‐defined graft copolymers with narrow molecular weight distributions (M_w/M_n < 1.40) via RAFT of vinyl acetate using macromolecular chain transfer agent. The final PAA‐g‐PVAc amphiphilic graft copolymers were obtained by selective acidic hydrolysis of PtBA backbone in acidic environment without affecting the side chains. The critical micelle concentrations in aqueous media were determined by fluorescence probe technique. The micelle morphologies were found to be spheres. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6032–6043, 2009     

Stereospecific polymerization of isobutyl vinyl ether catalyzed by calcined iron sulfate

The polymerization of isobutyl vinyl ether was studied in a heterogeneous system using iron (II) sulfate calcined in air at various temperatures as a catalyst. The maximum activity was shown by the catalyst calcined at 700°C, which effected the polymerization at room temperature in a few seconds, while the sulfate treated at 750°C was totally inactive. Poly(vinyl ethyl ether) was also obtained by the FeSO₄ (700°C) catalyst at room temperature. This catalyst formed the crystalline polymer (melting temperature 135–138°C) when the reaction was performed in toluene as solvent at room temperature. Poisoning experiments with Hammett indicators were carried out with the FeSO₄ (700°C) catalyst. The treatment with n-butylamine rendered it inactive in the reaction of isobutyl vinyl ether, while its catalytic activity was little affected by dicinnamalacetone. On the basis of the observed results, the nature of active sites of catalyst is discussed.     

Phase Separation in Aqueous Polymer Solutions as Studied by NMR Methods

Some possibilities of ¹H NMR spectroscopy in investigations of structural-dynamic changes and polymer-solvent interactions during the temperature-induced phase transitions in aqueous polymer solutions are described. Results obtained recently on D₂O solutions of poly(vinyl methyl ether) (PVME), poly(N-isopropylmethacrylamide) (PIPMAm), negatively charged copolymers of N-isopropylmethacrylamide and sodium methacrylate, and PIPMAm/PVME mixtures are discussed. A markedly different rate of dehydration process in dilute solutions on the one hand, and in semidilute and concentrated solutions on the other hand, was revealed from ¹H spin-spin relaxation measurements.     

Polymer-Solvent Interactions in Solutions of Thermoresponsive Polymers Studied by NMR and IR Spectroscopy

Summary: NMR relaxation and diffusion coefficient measurements revealed that a portion of water molecules is bound in mesoglobules formed in poly(N-isopropylmethacrylamide) (PIPMAm) and poly(vinyl methyl ether) (PVME) aqueous solutions above the LCST, with fast exchange between bound and free states (residence time ∼1 ms). Two types of bound water molecules were assigned to water bound inside mesoglobules and on their surface. For highly concentrated PVME/D₂O solutions (c ≥ 20 wt%) a slow exchange was detected by NMR for bound water (residence time = 2.1 s). For PIPMAm aqueous solution IR spectra indicate a two-steps character of the phase transition. For PIPMAm in D₂O/ethanol (EtOH) mixtures the globular structures were observed by NMR at 298 K for certain compositions of the mixed solvent (cononsolvency effect). Virtually no EtOH is bound in these globular structures, in contrast to the temperature-induced globular structures.     

Stereoregularity of radically polymerized poly(alkyl acrylates) and poly(trimethylsilyl acrylates) and the preparation of syndiotactic poly(methyl acrylate)

Nuclear magnetic resonance (NMR) spectroscopy was used to determine the stereoregularity of radically polymerized poly(ethyl acrylates), poly(trimethylsilyl acrylates), and poly(isopropyl acrylate-α,β-d₂). The ethyl acrylate polymers consisted of a random configuration having about 50% of isotactic diads, and their stereoregularities were independent of the polymerization temperature (40 to ?78°C). Poly(trimethylsilyl acrylates) and poly(isopropyl acrylate-α,β-d₂) prepared at low temperatures had a syndiotactic configuration. Syndiotactic poly(methyl acrylate) was derived from syndiotactic poly(trimethylsilyl acrylate). For poly(methyl acrylate), an approximate estimation of the stereoregularity by infrared spectroscopy was proposed.     

Stereoregulation in cationic polymerization by designed Lewis acids. II. Effects of alkyl vinyl ether structure

Stereoregulation in the cationic polymerization of various alkyl vinyl ethers was investigated with bis[(2,6‐diisopropyl)phenoxy]titanium dichloride ( 1 ; catalyst) in conjunction with the HCl adduct of isobutyl vinyl ether as an initiator in n‐hexane at −78 °C. The tacticities depended on the substituents of the monomers. Isobutyl and isopropyl vinyl ethers gave highly isotactic polymers (mm = 83%), whereas tert‐butyl and n‐butyl vinyl ethers resulted in lower isotactic contents (mm ∼ 50%) similar to those for TiCl₄, a conventional Lewis acid, thus indicating that the steric bulkiness of the substituents was not the critical factor in stereoregulation. A statistical analysis revealed that the high isospecificity was achieved not by the chain end but by the catalyst 1 or the counteranion derived therefrom. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1060–1066, 2001     

Living Cationic Polymerization of α-Methylstyrene. 2. Synthesis of Block and Random Copolymers with 2-Chloroethyl Vinyl Ether and End-Functionauzed Polymers†

Abstract

Both AB and BA block copolymers of α-methylstyrene (αMeSt) and 2-chloroethyl vinyl ether (CEVE) were synthesized by the sequential living cationic polymerization initiated with the HCl-CEVE adduct (1a)/SnBr₄ system in CH₂Cl₂ at -78°C. αMeSt-CEVE (AB) block copolymers with narrow molecular weight distributions ([Mbar]_w/[Mbar]_n ～ 1.15) were obtained when αMeSt was polymerized first, followed by addition of CEVE to the resulting αMeSt living polymer solution. The reverse order of monomer addition, from CEVE to αMeSt, also led to a BA-type block copolymer. In the polymerization of a mixture of the two monomers, almost random copolymers were obtained. Living polymerizations of αMeSt were also induced with functional initiating systems, HCl-functionalized vinyl ether adducts (1b-1d)/SnBr₄, to give end-function-alized poly(αMeSt)s with a methacrylate, an acetate, or a phthalimide terminal.     

NMR Study on Polymer-Solvent Interactions during Temperature-Induced Phase Separation in Aqueous Polymer Solutions

Some possibilities of NMR spectroscopy (mainly spin-spin relaxation) in investigations of hydration and other polymer-solvent interactions during the temperature-induced phase separation in aqueous polymer solutions are described. A certain portion of water molecules bound in phase-separated mesoglobules was revealed. The residence time of the bound HDO for poly(vinyl methyl ether) (PVME)/D₂O solution (c = 6 wt%) is 1.2 ms. With time a slow release of originally bound water from the respective mesoglobules was observed. For highly concentrated PVME/D₂O solutions (c = 20–60 wt%), the residence time of bound HDO ≫ 2.7 ms and fractions of bound water unchanged even for 70 h were found. A similar behaviour as described above for water (HDO) was also found for EtOH molecules in PVME/D₂O/EtOH solutions.