13C nuclear magnetic resonance studies on the stereochemical configurations of 2,4-dimethoxypentane and poly(alkyl vinyl ethers)

¹³C nuclear magnetic resonance (CMR) spectra were obtained for 2,4-dimethoxypentane, which is a model compound of poly(methyl vinyl ether), and the effects of the solvent and temperature on the chemical shifts were investigated. CMR spectra of poly-(alkyl vinyl ethers) were also determined and analyzed. The diad tacticities were obtained from β-methylene carbon resonances of poly(methyl vinyl ether), poly(ethyl vinyl ether), and poly(isobutyl vinyl ether), but not from those of poly(isopropyl vinyl ether) and poly(tert-butyl vinyl ether). The methoxyl carbon resonance of poly(methyl vinyl ether) and the ethoxyl methylene carbon resonance of poly(ethyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively. The α-methine and quaternary carbon resonances of poly(tert-butyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively.     

Stereoregularity of poly(vinyl ether)

α-Methylvinyl isobutyl and methyl ethers were polymerized cationically and the structure of the polymers was studied by NMR. Poly(α-methylvinyl methyl ether) polymerized with iodine or ferric chloride as catalyst was found to be almost atactic, whereas poly(α-methylvinyl isobutyl ether) polymerized in toluene with BF₃OEt₂ or AlEt₂Cl as catalyst was found to be isotactic. In both cases, the addition of polar solvent resulted in the increase of syndiotactic structure as is the case with polymerization of alkyl vinyl ether. tert-Butyl vinyl ether was polymerized, and the polymer was converted into poly(vinyl acetate), the structure of which was studied by NMR. A nearly linear relationship between the optical density ratio D₇₂₂/D₇₃₆ in poly(tert-butyl vinyl ether) and the isotacticity of the converted poly(vinyl acetate) was observed.     

Cationic polymerization of α,β-disubstituted olefins. V. Reactivity of propenyl alkyl ethers in cationic polymerization

To elucidate the effect of the introduction of a methyl group in the β-position of a vinyl monomer, propenyl alkyl ethers were copolymerized with vinyl ethers having the same alkoxy group. Propenyl alkyl ethers with an unbranched alkoxy group (ethyl or n-butyl propenyl ether) were more reactive than the corresponding vinyl ethers. This behavior is quite different from that of β-methylstyrene derivatives. However, propenyl alkyl ethers with branched alkoxy groups at the α carbon atom (isopropyl or tert-butyl propenyl ether) were less reactive than the corresponding vinyl ethers. Also, cis- isomers were more reactive than the trans isomers, regardless of the kind of alkoxy group and the polarity of the solvent.     

Effects of orientation on dynamic shear behavior of some amorphous polymers from 4.2° to 300°K

The dynamic shear behavior of four highly amorphous polymers in the unstretched and stretched states (draw ratios 3:1 to 6:1) was investigated with a torsion pendulum at temperatures from 4.2°K to 180–300°K and frequencies from 0.4 to 3.2 cps. The polymers studied were polystyrene, poly(vinyl acetate), poly(vinyl propionate), and poly(isobutyl vinyl ether). Previously unreported loss maxima were found at 48°K (1.5 cps) and 149°K (1.3 cps) for poly(vinyl proplonate), at 10°K (1.0 cps) for poly(vinyl acetate) and at 9°K (1.6 cps) for poly(isobutyl vinyl ether). Uniaxial orientation increased the shear storage modulus G, measured with the torsion axis parallel to the stretch direction and caused changes in the loss peaks which depended on the polymer material studied.     

Living cationic polymerization of α‐methyl vinyl ethers using SnCl4

Cationic polymerization of α‐methyl vinyl ethers was examined using an IBEA‐Et_1.5AlCl_1.5/SnCl₄ initiating system in toluene in the presence of ethyl acetate at 0 ～ ?78 °C. 2‐Ethylhexyl 2‐propenyl ether (EHPE) had a higher reactivity, compared to corresponding vinyl ethers. But the resulting polymers had low molecular weights at 0 or ?50 °C. In contrast, the polymerization of EHPE at ?78 °C almost quantitatively proceeded, and the number‐average molecular weight (M_n) of the obtained polymers increased in direct proportion to the EHPE conversion with quite narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.05). In monomer‐addition experiments, the M_n of the polymers shifted higher with low polydispersity as the polymerization proceeded, indicative of living polymerization. In the polymerization of methyl 2‐propenyl ether (MPE), the living‐like propagation also occurred under the reaction conditions similar to those for EHPE, but the elimination of the pendant methoxy groups was observed. The introduction of a more stable terminal group, quenched with sodium diethyl malonate, suppressed this decomposition, and the living polymerization proceeded. The glass transition temperature of the obtained poly(MPE) was 34 °C, which is much higher than that of the corresponding poly(vinyl ether). This poly(MPE) had solubility characteristics that differed from those of poly(vinyl ethers). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2202–2211, 2008     

Ring-opening polymerization of cyclobutane adducts of tetracyanoethylene and vinyl ethers with tertiary amines

Ring-opening polymerizations of cyclobutane adducts of tetracyanoethylene (TCNE) and vinyl ethers (VE) or p-methoxystyrene with tertiary amines are described. The polymerization of the cyclobutane adduct 1a of TCNE and ethyl vinyl ether (EVE) was carried out with 10 mol % of triethylamine in acetonitrile at ambient temperature to afford the alternating copolymer of TCNE and EVE with high molecular weight in good yield under various conditions. Under the optimum condition, the cyclobutane adducts of TCNE and a variety of VEs such as n-butyl vinyl ether, isobutyl vinyl ether, 2,3-dihydrofuran, and 3,4-dihydro-2H-pyran were polymerized to yield similar polymers. Although the cyclobutane adduct 4 of TCNE and p-methoxystyrene did not polymerize under these conditions, the treatment of 4 with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) in acetonitrile at 60°C gave the polymer. On the basis of the fact that the polymer molecular weight increased rapidly at the initial stage and slowly even after the consumption of all of monomers, we propose that the tertiary amine initiates the chain anionic polymerization of the cyclobutane adduct to afford an ammonium macrozwitterion 3 , which is subjected to the intermolecular nucleophilic substitution with each other in a step polymerization manner. © 1995 John Wiley & Sons, Inc.     

Preparation of block copolymers by use of peroxide-terminated prepolymer

Block copolymers containing poly(tetramethylene oxide) and poly(methyl methacrylate) segments were prepared. A commercially available poly(tetramethylene oxide) terminated with tolylene diisocyanate was capped with tert-butyl hydroxymethyl peroxide and the resulting prepolymer peroxide was used as a free-radical initiator of vinyl polymerization. Block copolymers formed in temperature-programmed vinyl polymerizations possessed improved impact strengths over poly(methyl methacrylate) from 0.35 to 1.18 for a fixed (nonoptimized) block length of poly(tetramethylene oxide).     

Stereoregulation in cationic polymerization by designed Lewis acids. II. Effects of alkyl vinyl ether structure

Stereoregulation in the cationic polymerization of various alkyl vinyl ethers was investigated with bis[(2,6‐diisopropyl)phenoxy]titanium dichloride ( 1 ; catalyst) in conjunction with the HCl adduct of isobutyl vinyl ether as an initiator in n‐hexane at −78 °C. The tacticities depended on the substituents of the monomers. Isobutyl and isopropyl vinyl ethers gave highly isotactic polymers (mm = 83%), whereas tert‐butyl and n‐butyl vinyl ethers resulted in lower isotactic contents (mm ∼ 50%) similar to those for TiCl₄, a conventional Lewis acid, thus indicating that the steric bulkiness of the substituents was not the critical factor in stereoregulation. A statistical analysis revealed that the high isospecificity was achieved not by the chain end but by the catalyst 1 or the counteranion derived therefrom. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1060–1066, 2001     

Reactivities and NMR spectra of vinyl ethers

Copolymerizations of n-butyl vinyl ether (M₁) with other vinyl ethers were carried out in toluene at ?78°C with EtAlCl₂ catalyst and the monomer reactivity ratios were determined. It was found that the relative reactivity of alkyl vinyl ether log 1/r₁ is higher when the alkyl group is more electron-donating and the reactivity correlates linearly with the Taft σ^* of alkyl group in the monomer. The NMR spectra of vinyl ethers and of vinyl ether–trialkylaluminum complexes were investigated. Close correlations were found between the spectral characteristics and the relative reactivity of vinyl ether in the copolymerization. The degree of resonance contribution in alkyl vinyl ether was also discussed on the basis of NMR data.     

Cationic polymerization of α,β-disubstituted olefins. IV. Stereospecific polymerization of propenyl alkyl ethers catalyzed by BF3·O(C2H5)2 and Al2(SO4)3–H2SO4 complex

The cis- and trans-propenyl alkyl ethers were polymerized by a homogeneous catalyst [BF₃·O(C₂H₅)₂] and a heterogeneous catalyst [Al₂(SO₄)₃–H₂SO₄ complex]. Methyl, ethyl, isopropyl, n-butyl and tert-butyl propenyl ethers were used as monomers. The steric structure of the polymers formed depended on the geometric structures of monomer and the polymerization conditions. In polymerizations with BF₃·O(C₂H₅)₂ at ?78°C., trans isomers produced crystalline polymers, but cis isomers formed amorphous ones except for tert-butyl propenyl ether. On the other hand, highly crystalline polymers were formed from cis isomers, but not from the trans isomers in the polymerization by Al₂(SO₄)₃–H₂SO₄ complex at 0°C. The x-ray diffraction patterns of the crystalline polymers obtained from the trans isomers were different from those produced from the cis isomers, except for poly(methyl propenyl ether). The reaction mechanism was discussed briefly on these basis of these results.     

Stereospecific polymerization of isobutyl vinyl ether. III. Polymerization with VCl3 • LiCl

The polymerization of isobutyl vinyl ether by vanadium trichloride in n-heptane was studied. VCl₃ ? LiCl was prepared by the reduction of VCl₄ with stoichiometric amounts of BuLi. This type of catalyst induces stereospecific polymerization of isobutyl vinyl ether without the action of trialkyl aluminum to an isotactic polymer when a rise in temperature during the polymerization was depressed by cooling. It is suggested that the cause of the stereospecific polymerization might be due to the catalyst structure in which LiCl coexists with VCl₃, namely, VCl₃ ? LiCl or VCl₂ ? 2LiCl as a solid solution in the crystalline lattice, since VCl₃ prepared by thermal decomposition of VCl₄ and a commercial VCl₃ did not produce the crystalline polymer and soluble catalysts such as VCl₄ in heptane and VCl₃ ? LiCl in ether solution did not yield the stereospecific polymer. It was found that some additives, such as tetrahydrofuran or ethylene glycol diphenyl ether, to the catalyst increased the stereospecific polymerization activity of the catalysts. Influence of the polymerization conditions such as temperature, time, monomer and catalyst concentrations, and the kind of solvent on the formed polymer was also examined.     

Living cationic polymerization of vinyl ethers with a functional group. VII. Polymerization of vinyl ethers with a silyloxyl group and synthesis of polyalcohols and related functional polymers

Living cationic polymerizations of two silicon-containing vinyl ethers, 2-(t-butyldimethyl-silyloxyl)ethyl vinyl ether (tBuSiVE) and 2-(trimethylsilyloxyl)ethyl vinyl ether (MeSiVE), have been achieved with use of the hydrogen iodide/iodine (HI/I₂) initiating system in toluene at ?15 or ?40°C, despite the existence of the acid-sensitive silyloxyl pendants. The living nature of the polymerizations was demonstrated by linear increases in the number-average molecular weights (M?_n) of the polymers in direct proportion to monomer conversion and by their further rise upon addition of a second monomer feed to a completely polymerized reaction mixture. The polymers obtained in these experiments all exhibited very narrow molecular weight distributions (MWD) with M?_w/M?_n around or below 1.1. Desilylation of the polymers under mild conditions (with H⁺ for MeSiVE and F^? for tBuSiVE) gave poly(2-hydroxyethyl vinyl ether), a water-soluble polyalcohol with a narrow MWD. The living processes also permitted clean syntheses of amphiphilic AB block copolymers and water-soluble methacrylate-type macromonomers, all of which bear narrowly distributed segments of the polyalcohol derived from the silicon-containing vinyl ethers.     

Multifunctional coupling agents for living cationic polymerization. IV. Synthesis of end-functionalized multiarmed poly(vinyl ethers) with multifunctional silyl enol ethers

Telechelic ( 8 ) and end-functionalized four-arm star polymers ( 9 ) were synthesized through the coupling reactions of end-functionalized living poly(isobutyl vinyl ether) ( 5; DP _n ～ 10) with the bi-and tetrafunctional silyl enol ethers, H_4-nC? [CH₂OC₆H₄C(OSiMe₃) = CH₂]_n ( 3: n = 2; 4: n = 4). The precursor polymers 5 were prepared by living cationic polymerization with functionalized initiators, CH₃CH(Cl)OCH₂CH₂X(6), in conjunction with zinc chloride in methylene chloride at ?15°C. The initiators 6 were obtained by the addition of hydrogen chloride gas to vinyl ethers bearing pendant functional groups X , including acetoxy [? OC(O)CH₃], styryl (? OCH₂C₆H₄-p-CH = CH₂), and methacryloyl [? OC(O)C(CH₃) = CH₂]. The coupling reactions with 3 and 4 in methylene chloride at ?15°C for 24 h afforded the end-functionalized multiarmed polymers ( 8 and 9 ) in high yield (>91%), where those with styryl or methacryloyl groups are new multifunctional macromonomers. © 1994 John Wiley & Sons, Inc.     

Structure and reactivity α,β-unsaturated ethers. II. Cationic copolymerizations of propenyl isobutyl ether

cis- and trans-Propenyl isobutyl ethers were copolymerized with each other and each with vinyl isobutyl ether separately under various conditions. In homogeneous polymerizations a cis-β-methyl substitution on vinyl isobutyl ether apparently enhanced the reactivity, whereas the trans substitution tended to reduce it slightly. In heterogeneous catalysis, on the other hand, a β-methyl group on the vinyl ether, whether cis or trans, greatly reduced the reactivity, probably because of the steric hindrance toward the adsorption of monomers on the catalyst surface. The relative reactivities of cis- and trans-propenyl isobutyl ethers ranged from 2 to 20, depending on the polymerization conditions. The polymer end formed from the cis monomer exhibited special steric effects. It was concluded that even in homogeneous media the rotation of the polymer end around the terminal carbon–carbon bond is restricted.     

End-Functionalized polymers by living cationic polymerization. IV. Poly(vinyl ethers) with acidic or basic terminal groups by functional initiator method

Carboxylic acid or primary amine-terminated poly(isobutyl vinyl ethers) were synthesized by living cationic polymerizations with functionalized initiators (CH₃CHIO? CH₂CH₂ ? X; X: that are the adducts of the corresponding vinyl ethers (CH₂ ? CH ? OCH₂CH₂? X) with hydrogen iodide. In the presence of iodine, these initiators induced living cationic polymerization of isobutyl vinyl ether to give polymers with the α-end group of X originating from the initiators. The polymer molecular weights were regulated by the monomer to initiator feed ratio and the molecular weight distributions were very narrow (M _w/M _n ≤ 1.15). Subsequent deprotection of the terminal group X led to polymers with a terminal carboxylic acid or primary amine. ¹H- and ¹³C-NMR analyses showed that the end functionalities of these polymers were all close to unity.     

Head-to-head vinyl polymers. III. Preparation and characterization of head-to-head poly(acrylic acid) and its esters

Head-to-head (h-h) poly(acrylic acid) (PAA) and some h-h poly(alkyl acrylates) (PRA) with methyl, ethyl, n-propyl, n-butyl, isobutyl and 2-ethylhexyl substituents were prepared by hydrolysis or esterifications of the alternating copolymer of ethylene with maleic anhydride. In general, these esterification reactions became increasingly difficult as the carbon chain in the alcohols lengthened or branched. The softening, glass transition, and degradation temperatures of the h-h polymers obtained were somewhat higher than those of the corresponding head-to-tail (h-t) polymers. The main degradation products of both h-h and h-t PRA were identified by pyrolytic gas chromatography as the alcohol and monomer. In addition, the relative ratios of the amounts of alcohol to monomer were larger for h-h than for the corresponding h-t polymers.     

Star‐shaped cyclopolymers: A new category of star polymer with rigid cyclized arms prepared by controlled cationic cyclopolymerization and subsequent microgel formation of divinyl ethers

The combination of living/controlled cationic cyclopolymerization and crosslinking polymerization of bifunctional vinyl ethers (divinyl ethers) was applied to the synthesis of core‐crosslinked star‐shaped polymers with rigid cyclized arms. Cyclopolymerization of 4,4‐bis(vinyloxymethyl)cyclohexene ( 1 ), a divinyl ether with a cyclohexene group, was investigated with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in toluene at 0 °C. The reaction proceeded quantitatively to give soluble poly( 1 )s in organic solvents. The content of the unreacted vinyl groups in the produced polymers was less than ～3 mol%, and therefore, the degree of cyclization of the polymers was determined to be ～97%. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that living cyclopolymerization of 1 occurred. The chain linking reactions among the formed living cyclopolymers with 1,4‐bis(vinyloxy)cyclohexane ( 3 ) as a crosslinker in toluene at 0 °C produced core‐crosslinked star‐shaped cyclopoly( 1 )s [star‐poly( 1 )s] in high yield (100%). Dihydroxylation of the cyclohexene double bonds of star‐poly( 1 ) gave hydrophilic water‐soluble star‐shaped polymers with rigid arm structure [star‐poly( 1 )‐OH] with thermo‐responsive function in water. T_gs of star‐poly( 1 ) and star‐poly( 1 )‐OH were 135 °C and 216 °C, respectively; these values are very high as vinyl ether‐based star‐shaped polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1094–1102     

Radiation-Induced Degradation of a Series of Poly(vinyl Ethers)

The degradative effects of γ-radiation on diethyl ether solutions of poly(alkyl vinyl ethers) under a variety of conditions were studied by polymer molecular weight measurements. Poly(methyl vinyl ether) (PMVE), poly(ethyl vinyl ether) (PEVE), poly(isopropyl vinyl ether) (PIPVE), and poly(isobutyl vinyl ether) (PIBVE) exhibited similar degradative behavior, with G_(SC) values between 0.3 and 0.9 scissions/100 eV at 0°C. Chemically polymerized and radiation-polymerized PEVE samples gave comparable results. Chain degradation was much more pronounced for samples of poly(tert-butyl vinyl ether) (PTBVE) which yielded a G_(SC) value of 3.6 at 0°C. Degradation experiments conducted on PEVE in air resulted in significantly higher rates of scission: G_(SC) = 5.6 scissions/100 eV at 0°C. Chain scission was not measurably influenced by changing the solvent from diethyl ether to di-isopropyl ether. Increased polymer concentration was found to reduce the rate of polymer degradation.     

Photocatalyzed Hydrogen Atom Transfer Degradation of Vinyl Polymers: Cleavage of a Backbone C−C Bond Triggered by Radical Activation of a C−H Bond in a Pendant

In this work, we achieved a triggering degradation of polymers composed of carbon-carbon (C−C) bonded backbone without relying on introduction of labile heteroatom-based bond. The crucial point for the achievement is using vinyl ether (VE) as a comonomer in radical copolymerization of (meth)acrylate for introduction of the carbon-hydrogen (C−H) bonds active for photocatalyzed hydrogen atom transfer (HAT) as triggers in the pendant. Interestingly, methyl methacrylate (MMA)-n-butyl vinyl ether (NBVE) copolymer underwent degradation in acetonitrile in the presence of benzophenone (Ph₂CO) under UV irradiation at 80 °C. The degradation did not take place, when any one of UV, Ph₂CO, heat, and NBVE unit was removed or HAT-active solvent such as toluene and 1,4-dioxane was used. These control experiments strongly supported the HAT-triggering degradation. Furthermore, the degradation behaviors of the copolymers with other vinyl ethers such as tert-butyl vinyl ether and methyl isopropenyl ether indicated that the C−H bond neighboring to oxygen on the pendant is mainly responsible for the trigger leading to degradation. The HAT-triggering degradation was also demonstrated even with the acrylate-based copolymer.     

Polymers derived from fluoroketones. III. Monomer synthesis,polymerization, and wetting properties of poly(allyl ether) and poly(vinyl ether)

The synthesis and polymerization of a series of perhaloalkyl allyl and vinyl ethers derived from perhaloketones is described. Data on the critical surface tension of wetting (γ_c) for high molecular weight polymers of heptafluoroisopropyl vinyl ether and low molecular weight poly(heptafluoroisopropyl allyl ether) is also presented. Preparation of the allyl ethers is a one-step, high-yield displacement reaction between the potassium fluoride–perhaloacetone adduct and an allyl halide, such as allyl bromide. The vinyl ethersare prepared by a two-step process which involves displacement of halide from a 1,2-dihaloethane with a KF–perhaloacetone adduct and dehydrohalogenation of the 1-halo-2-perhaloalkoxyethane to a vinyl ether. Low molecular weight polymers were obtained with heptafluoroisopropyl allyl ether by using a high concentration of a free-radical initiator. The low molecular weight poly(heptafluoroisopropyl allyl ether) had a γ_c of 21 dyne/cm. No polymer was obtained with tributylborane–oxygen or with VCl₃–AIR₃, with gamma radiation, or by exposure to ultraviolet light. High molecular weight polymers were obtained from heptafluoroisopropyl vinyl either by using either lauryl peroxide or ultraviolet light but not by exposure to BF₃–etherate. The γ_c for poly(heptafluoroisopropyl vinyl ether) ranged from 14.2 to 14.6 dyne/cm., and the significance of this value is discussed in relation to the γ_c for poly(heptafluoroisopropyl acrylate).