Synthesis of wholly aromatic polysulfonamides from aromatic disulfonyl chlorides and aromatic diamines

Wholly aromatic polysulfonamides of high molecular weight were prepared by the solution poly-condensation of aromatic disulfonyl chlorides with aromatic diamines in tetramethylene sulfone and substituted pyridines as the acid acceptor. Polysulfonamides with inherent viscosities as high as 1.2 were readily obtained by initiating polycondensation at a temperature of 5–10°C to control the side reactions. The polycondensation was fairly fast and was completed in 10 min at 60°C. All the aromatic polysulfonamides dissolved in a wide range of solvents, including acetone and tetrahydrofuran. These polymers were less thermally stable than the corresponding aromatic polyamides.     

Synthesis of polyarylamines by vinylogous nucleophilic substitution polymerization of bis(4-chloro-3-nitrophenyl) sulfone with diamines

A series of new polyarylamines was prepared by the vinylogous nuclephilic substitution polymerization of bis(4-chloro-3-nitrophenyl) sulfone with both aromatic and aliphatic diamines. The synthesis involves the solution polycondensation in a polar aprotic solvent at elevated temperatures, a tertiary amine being used as an acid acceptor. Of these solvents, dimethyl sulfoxide and N-methyl-2-pyrrolidone were the most effective for the preparation of high molecular weight polymers. The polyarylamines having inherent viscosities in the range of 0.1–0.5 were all amorphous and highly soluble in polar aprotic solvents. Thermogravimetric analysis under both air and nitrogen atmospheres indicated that rapid decomposition began above 300°C for the polyarylamines from aromatic diamines.     

Synthesis and characterization of N‐benzoylated wholly aromatic polyamides from 4,4′‐oxydianilinobis(benzimidoyl) chloride and aromatic dicarboxylic acids

A novel type of polyamides, N‐benzoylated wholly aromatic polyamides, were synthesized by low‐temperature solution polycondensation of a new aromatic bis(imidoyl) chloride, 4,4′‐oxydianilinobis(benzimidoyl) chloride, with aromatic dicarboxylic acids, 4,4′‐oxydibenzoic acid and isophthalic acid. Compared with the conventional all aromatic polyamides and also N‐phenylated wholly aromatic polyamides, these N‐benzoylated aramides exhibit better solubility in organic solvents, lower glass transition temperatures and thermal stability.     

Synthesis and Characterization of Donor–π‐Acceptor‐Based Porphyrin Sensitizers: Potential Application of Dye‐Sensitized Solar Cells

New porphyrin sensitizers based on donor–π‐acceptor (D‐π‐A) approach have been designed, synthesized, characterized by various spectroscopic techniques and their photovoltaic properties explored. N,N′‐Diphenylamine acts as donor, the porphyrin is the π‐spacer, and either carboxylic acid or cyanoacryclic acid acts as acceptor. All compounds were characterized by using ¹H NMR spectroscopy, ESI‐MS, UV–visible emission spectroscopies as well as electrochemical methods. The presence of aromatic groups between porphyrin π‐plane and acceptor group push the absorption of both Soret and Q‐bands of porphyrin towards the red region. The electrochemical properties suggests that LUMO of these sensitizers above the TiO₂ conduction band. Finally, the device was fabricated using liquid redox electrolyte (I^?/I₃^?) and its efficiency was compared with that of a leading sensitizer.     

Synthesis of polypyrimidoquinazolinetetraones from N,N′-bis(mesyloxy)pyromellitimide and aromatic diamines

A novel class of polypyrimidoquinazolinetetraones was synthesized by the polymerization of N,N′-bis(mesyloxy)pyromellitimide with aromatic diamines in N-methyl-2-pyrrolidone in the presence of triethylamine as an acid acceptor. The polymerization proceeded probably through the formation of ring-opened adducts, followed by elimination and rearrangement yielding polyamide-isocyanates, which in turn were cyclized to give polypyrimidoquinazolinetetraones. These polymers, which were soluble in strong acids, had inherent viscosities in the range of 0.17–0.27. Thermogravimetric analyses indicated that they began to decompose at around 450°C in air.     

Polyaromatic ether-ketones and polyaromatic ether-ketone sulfonamides from 4-phenoxybenzoyl chloride and from 4,4′-dichloroformyldiphenyl ether

Polyaromatic ether-ketones possessing high thermal stabilities were prepared by Friedel—Crafts polymerizations from 4-phenoxybenzoyl chloride and from 4,4′-dichloroformyldiphenyl ether and diphenyl ether. Sulfonation and subsequent sulfamidation of these polymers afforded polyaromatic ether-ketone sulfonamides with different degrees of substitution depending on the reaction conditions. Sulfonation reactions with chlorosulfonic acid did not cause much degradation on the polymers. The polysulfonamides were soluble in various organic solvents such as N,N-dimethylformamide, dimethylsulfoxide, or chloroform, and could be cast into transparent films. These polymers may be used as desalination membranes.     

N-methyl-substituted aromatic polyamides

A series of N-methyl-substituted aromatic polyamides derived from the secondary aromatic diamines 4,4′-bis(methylamino)diphenylmethane, 3,3′-bis(methylamino)diphenylmethane, 4,4′-bis(methylamino)benzophenone or 3,3′-bis(methylamino)benzophenone and isophthaloyl dichloride, and terephthaloyl dichloride or 3,3′-diphenylmethane dicarboxylic acid dichloride was prepared by high-temperature solution polymerization in s-tetrachloroethane. Compared with analogous unsubstituted and partly N-methylated aromatic polyamides, the full N-methylated polyamides exhibited significantly lower glass transition temperatures (T_g), reduced crystallinity, improved thermal stability, and good solubility in chlorinated solvents.     

Self‐Assembled Pd6 Open Cage with Triimidazole Walls and the Use of Its Confined Nanospace for Catalytic Knoevenagel‐ and Diels–Alder Reactions in Aqueous Medium

The two‐component self‐assembly of a 90° Pd^II acceptor and a triimidazole donor led to the formation of a water‐soluble semi‐cylindrical cage with a hydrophobic cavity, which was separately crystallized with hydrophilic‐ and hydrophobic guests. The parent cage was found to catalyze the Knoevenagel condensation reaction of a series of aromatic mono‐aldehydes with active methylene compounds, such as Meldrum′s acid or 1,3‐dimethylbarbituric acid. The confined hydrophobic nanospace within this cage was also used in the catalytic Diels–Alder reactions of 9‐hydroxymethylanthracene with N‐phenylmaleimide or N‐cyclohexylmaleimide.     

Cyclopolycondensation. XIII. New synthetic route to fully aromatic poly(heterocyclic imides) with alternating repeating units

Fully aromatic poly(heterocyclic imides) of high molecular weight were prepared by the cyclopolycondensation reactions of aromatic diamines with new monomer adducts prepared by condensing orthodisubstituted aromatic diamines with chloroformyl phthalic anhydrides. The low-temperature solution polymerization techniques yielded tractable poly(amic acid), which was converted to poly(heterocyclic imides) by heat treatment to effect cyclodehydration at 250–400°C under reduced pressure. In this way, the polyaromatic imideheterocycles such as poly(benzoxazinone imides), poly(benzoxazole imides), poly(benzimidazole imides) and poly(benzothiazole imides) were prepared, which have excellent processability and thermal stability both in nitrogen and in air. The poly(amic acids) are soluble in such organic polar solvents as N,N-dimethyl-acetamide, N-methylpyrrolidone, and dimethyl sulfoxide, and the films can be cast from the polymer solution of poly(amic acids) (η_inh = 0.8–1.8). The film is made tough by being heated in nitrogen or under reduced pressure to effect cyclodehydration at 300–400°C. The polymerization was carried out by first isolating the monomer adducts, followed by polymerization with aromatic diamines. On subsequently being heated, the open-chain precursor, poly(amic acid), undergoes cyclodehydration along the polymer chain, giving the thermally stable ordered copolymers of the corresponding heterocyclic imide structure.     

Synthesis and properties of aromatic polyamides containing the cyclohexane structure

1,1-Bis[4-(4-carboxyphenoxy)phenyl]cyclohexane (III) and 1,1-bis[4-(4-aminophenoxy)phenyl]cyclohexane (V) were prepared in two main steps starting from the aromatic nucleophilic substitution of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 1,1-bis(4-hydroxyphenyl)cyclohexane in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides with cyclohexylidene cardo groups were directly polycondensated from dicarboxylic acid III with various aromatic diamines or from diamine V with various aromatic dicarboxylic acids in an N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. The polyamides exhibited inherent viscosities in the range of 0.45 to 1.78 dL/g. Almost all of the polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and could afford transparent, flexible, and tough films by solution casting. The glass transition temperatures (T_g) of these aromatic polyamides were in the range of 180–243°C by DSC, and the 10% weight loss temperatures in nitrogen and air were all above 450°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3575–3583, 1999     

Preparation and properties of aromatic polymides from 2,2′-bibenzoic acid and aromatic diamines

Aromatic polyamides having inherent viscosities up to 1.8 dL/g were synthesized either by the direct polycondensation of 2,2′-bibenzoic acid with various aromatic diamines or by the low temperature solution polycondensation of 2,2′-bibenzoyl chloride with aromatic diamines. All the aromatic polyamides were amorphous and soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone, dimethyl sulfoxide, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polymides had glass transition temperatures in the range of 226-306deg;C and began to lose weight around 350°C in air.     

Synthesis and characterization of novel aromatic polyamides with polyalicyclic cardo groups

5,5-Bis[4-(4-carboxyphenoxy)phenyl]hexahydro-4,7-methanoindan ( 3a ) and 5,5-bis[4-(4-aminophenoxy)phenyl]hexahydro-4,7-methanoindan ( 3b ) were prepared in two main steps starting from the aromatic nucleophilic halogen-displacement of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 5,5-bis(4-hydroxyphenyl)hexahydro-4,7-methanoindan in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides having polyalicyclic cardo units were directly polycondensated from dicarboxylic acid 3a with various aromatic diamines, or from diamine 3b with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. High molecular weight polyamides with inherent viscosities between 0.73 and 1.44 dL/g were obtained. All polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and afforded transparent, flexible, and tough films by solution casting. The glass-transition temperatures (T_g) of these aromatic polyamides were in the range of 219–253°C by DSC, and the 10% weight loss temperatures in nitrogen and air were above 467 and 465°C, respectively. A comparative study of some polyamides with an isomeric repeat unit is also presented. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4510–4520, 1999     

Tieffarbige Pseudooxo-Krokonsäurebisamide

4,5-Dichloro-2-dicyanomethylene-4-cyclopenten-1,3-dione (2) is synthesized by partial Retro-Michael addition of tetracyanoethylene to 4,5-dichloro-4-cyclopentene-1,3-dione. Compound2 is a new electron acceptor, withN-methyl-benzthiazolone-2-hydrazone giving a charge-transfer complex (6). Nucleophilic substitution of2 by pyrrolidine, morpholine and piperidine leads to deeply coloured bisamides7,8. With aromatic amines bisamides are formed too (11), but monosubstitution products can be isolated.N,N-Dimethylaniline reacts with2 by elimination of hydrogen chloride, leading to aN,N-dimethylaminophenyl monosubstitution product of2. The bisamides are green-blue compounds with intense violet colour in solution. The dyes can be classified as pseudooxo croconic acid bisamides, the new type of chromophore is discussed by¹³C-spectroscopy and quantum chemical calculations (CNDO-CI).

Herrn Prof. Dr.E. Ziegler zum 70. Geburtstag gewidmet.     

Steric and Electronic Requirements in the Synthesis of 2,3‐Dihydro‐4(1H)‐quinolinones by the Tandem Michael‐SNAr Reaction

The steric and electronic requirements have been investigated for the synthesis of 2,3‐dihydro‐4(1H)‐quinolinones by the tandem Michael‐S_NAr reaction. Substrates bearing a single methyl group at the β‐enone carbon gave excellent yields of the title compounds from both the E and Z isomers with X═H or NO₂. Substrates with β,β‐dimethyl substitution at the Michael terminus gave low yields of heterocyclic products in molecules having monoactivated S_NAr aromatic acceptor rings (X═H) and very good yields for diactivated systems (X═NO₂). For these hindered substrates, success in the final cyclization hinges on the ability of the aromatic acceptor to capture the pendant nitrogen nucleophile of the initial Michael adduct before this intermediate can revert to starting materials.     

Direct synthesis and properties of polybenzodipyrrolediones from dibenzylidenebenzodifurandiones and various diamines

Aromatic and aliphatic polybenzodipyrrolediones have been synthesized directly by the solution cyclopolycondensation of two dibenzylidenebenzodifurandiones with four different diamines in refluxing m-cresol or o-phenylphenol in the presence of boric acid. The polymerizations proceeded smoothly in a homogeneous solution and afforded the heterocyclic polymers having inherent viscosities as high as 1.0 almost quantitatively. All the polymers were readily soluble in a wide range of solvents, including N-methyl-2-pyrrolidone (NMP), hot m-cresol, and hot pyridine. Tough, transparent, yellow films could be cast from NMP solutions of the polymers. Thermogravimetric analysis of the aromatic polybenzodipyrrolediones showed a 10% weight loss temperature of 460–500°C under nitrogen. The results also indicated that the aromatic polymers were somewhat less thermally stable than wholly aromatic polypyromellitimides.     

Synthesis and properties of aromatic polyamides based on 4,4′-(2,7-naphthalenedioxy)dibenzoic acid

4,4′-(2,7-Naphthalenedioxy)dibenzoic acid, a new aromatic dicarboxylic acid monomer, was prepared starting from 2,7-dihydroxynaphthalene and p-fluorobenzonitrile in three steps. Using triphenyl phosphite (TPP) and pyridine as condensing agents, a series of novel aromatic polyamides were synthesized by the direct polycondensation of the diacid monomer and aromatic diamines in N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. The resulting polyamides had inherent viscosities ranging from 0.48 to 0.67 dL/g. Most of these polyamides were readily soluble in polar solvents, such as NMP and N,N-dimethylacetamide (DMAc). Transparent, flexible, and tough films were cast from their DMAc solutions. They had tensile strengths of 65–70 MPa, elongations to break of 5–7%, and initial moduli of 1.4–1.6 GPa. Most of these polymers proved to be amorphous, with glass transition temperatures in the range between 143–227°C. Thermogravimetric analysis (TG) showed that all the polyamides were stable up to 450°C in both air and nitrogen atmospheres. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1469–1478, 1997     

Ultrafast organocatalytic ring-opening polymerization of N-sulfonyl aziridine in the melt

An ultrafast approach for controlled synthesis of well-defined polysulfonamides is established through organocatalytic anionic ring-opening polymerization (ROP) of N-sulfonyl aziridine in the melt. Several different organobases are investigated, and it is found that N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalyzed ROP of 2-methyl-N-tosylaziridine (TsMAz) gives the desired polymer, while 1,4-diazabicyclo[2.2.2]octane (DABCO) and 1,8-diazabicyclo[5.4.0]-undec-7-ene (DBU) initiate the polymerization along with initiator to produce uncontrolled polymers. Using PMDETA as the catalyst, poly(2-methyl-N-tosylaziridine) with molecular weight over 100 kg/mol can be synthesized in less than 90 s. Various initiators, including carboxylic acid, N-sulfonyl amide, unactivated amine, phenol, and thiol, are applicable for this protocol to give the molecular weight and end-group controlled polymers under the open-flask condition. Combining this ultrafast ROP with ring-opening metathesis polymerization (ROMP), a brush copolymer is facile synthesized. This approach allows the ultrafast metal-free synthesis of polysulfonamide and expands the scope of initiators for the ROP of N-sulfonyl aziridines.     

Acid‐Promoted Chemoselective Introduction of Amide Functionality onto Aromatic Compounds Mediated by an Isocyanate Cation Generated from Carbamate

Carbamates have been used as precursors of isocyanates, but heating in the presence of strong acids is required because cleavage of the C? O bond in carbamates is energy‐demanding even in acid media. Direct amidation of aromatic compounds by isocyanate cations generated at room temperature from carbamoyl salicylates in trifluoromethanesulfonic acid (TfOH) was examined. Carbamates with ortho‐salicylate as an ether group (carbamoyl salicylates) showed dramatically accelerated O? C bond dissociation in TfOH, which resulted in facile generation of the isocyanate cation. These chemoselective intermolecular aromatic amidation reactions proceeded even at room temperature and showed good compatibility with other electrophilic functionalities and high discrimination between N‐monosubstituted carbamate and N,N‐disubstituted carbamate. The reaction rates of secondary and tertiary amide formation were markedly different, and this difference was utilized to achieve successive (tandem) amidation reactions of molecules with an N‐monosubstituted carbamate and an N,N‐disubstituted carbamate with two kinds of aromatic compounds.     

Synthesis and characterization of aromatic polyamides from 1,1-bis(4-aminophenyl)-2,2-diphenylethylene and aromatic diacid chlorides

Novel, soluble aromatic polyamides and copolyamides containing tetraphenylethylene units were prepared by the low temperature solution polycondensation of 1,1-bis(4-aminophenyl)-2,2-diphenylethylene and aromatic diamines with various aromatic diacid chlorides. Highmolecular-weight polyamides having inherent viscosities of 0.6–1.5 dL/g and number-average molecular weight above 21000 were obtained quantitatively. These polymers were readily soluble in various solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide (DMAc), and dimethyl sulfoxide and gave pale yellow, transparent, flexible films by casting from DMAc solution. The polymers had glass transition temperatures between 290 and 340°C, and started to lose weight around 400°C, with 10% weight loss being recorded at about 470°C in air.     

Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′‐bis(4‐aminophenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine, N, N′‐bis(4‐aminophenyl)‐N, N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluoronitrobenzene, followed by catalytic reduction. A series of novel aromatic polyamides with triphenylamine units were prepared from the diamine and various aromatic dicarboxylic acids or their diacid chlorides via the direct phosphorylation polycondensation or low‐temperature solution polycondensation. All the polyamides were amorphous and readily soluble in many organic solvents such as N, N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass‐transition temperatures (257–287 °C), 10% weight‐loss temperatures in excess of 550 °C, and char yields at 800 °C in nitrogen higher than 72%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2810–2818, 2002