Synthesis of <Emphasis Type="Italic">para</Emphasis>-substituted 1,4,5,6,7,7-hexachlorobicyclo-[2.2.1]hepta-2,5-dien-2-ylmethyl benzoates

[4 + 2]-Cycloaddition of hexachlorocyclopentadiene to para-substituted prop-2-yn-1-yl benzoates gave the corresponding 1,4,5,6,7,7-hexachlorobicyclo[2.2.1]hepta-2,5-dien-2-ylmethyl benzoates. The structure of the adducts was confirmed by independent synthesis, esterification of para-substituted benzoic acids with 1,4,5,6,7,7-hexachlorobicyclo[2.2.1]hepta-2,5-dien-2-ylmethanol.     

Total chemical synthesis of 2-ethenyl-3,5-dimethylpyrazine and 3-ethenyl-2,5-dimethylpyrazine

The aroma compounds 2-ethenyl-3,5-dimethylpyrazine 1 and 3-ethenyl-2,5-dimethylpyrazine 2 were synthesized via a new chemical route. The key steps of the synthesis involve cyclocondenzation of 1-[bicyclo[2.2.1]5-hepten-2-yl]-1,2-propanedione and 1,2-propanediamine, aromatization of the resulting 5,6-dihydropyrazines, and subsequent Retro-Diels-Alder reaction to generate pyrazines 1 and 2. Pyrazine 1, a powerful odorant, was obtained in large excess (8:2) when endo-1-[bicyclo[2.2.1]5-hepten-2-yl]-1,2-propanedione was used as intermediate substrate.     

Thermal degradation of graft copolymers of PVC prepared by mastication with styrene and methyl methacrylate,and of further PVC mixtures and vinyl chloride copolymers

Graft copolymers prepared by mastication of PVC in the presence of styrene or of a styrene/ methyl methacrylate mixture, have been studied by thermogravimetry, estimation of hydrogen chloride, thermal volatilization analysis, and flash pyrolysis/g.l.c. The degradation behaviour of PVC/ polystyrene mixtures, vinyl chloride/styrene random copolymers, a random copolymer of methyl methacrylate and styrene, and PVC/poly-α-methylstyrene mixtures has also been studied. The graft copolymers resemble the PVC/methacrylate graft copolymers previously studied in showing retardation of the dehydrochlorination reaction, but contrast with them in yielding chain fragments but no monomer during HCl production. Some stabilization of the second component at higher temperatures is also found. PVC/polystyrene mixtures behave in the same way as the corresponding graft copolymers, but vinyl chloride/styrene copolymers show reduced stability towards both dehydrochlorination and monomer production compared with the homopolymers. PVC/poly-α-methylstyrene mixtures yield some monomer concurrently with HCl loss, and display marked retardation of the latter reaction. Stabilization of the second polymer at higher temperatures is again observed. Many of these results add further strong support to the view that chlorine atoms are involved as chain carriers in the thermal dehydrochlorination of PVC.     

Synthesis and Dehydration of endo-2-(3-R-Isoxazol-5-yl)-1,7,7-trimethylbicyclo[2.2.1]heptan-exo-2-ols

endo-2-Ethynyl-1,7,7-trimethylbicyclo[2.2.1]heptan-exo-2-ol reacts with nitrile oxides, yielding endo-2-(3-R-isoxazol-5-yl)-1,7,7-trimethylbicyclo[2.2.1]heptan-exo-2-ols. Treatment of the latter with methanesulfonyl chloride in pyridine leads to dehydration and formation of mixtures of the corresponding 1-(3-R-isoxazol-5-yl)-3,3-dimethyl-2-methylenebicyclo[2.2.1]heptanes and 2-(3-R-isoxazol-5-yl)-1,7,7-trimethylbicyclo[2.2.1]hept-2-enes at a ratio of 2:1.     

Copolymerization of vinyl chloride with 1-vinyl-4,5,6,7-tetrahydroindole and 2-methyl-5-vinylpyridine

The radical copolymerization of vinyl chloride with 2-methyl-5-vinylpyridine and 1-vinyl-4,5,6,7-tetrahydroindole is accompanied by dehydrochlorination. In the vinyl chloride-2-methyl-5-vinylpyridine system, the evolved hydrogen chloride interacts with a pyridine hydrogen atom to give charged units of a heterocycle. In the vinyl chloride-1-vinyl-4,5,6,7-tetrahydroindole system, the hydrogen chloride being formed initiates the cationic dimerization of a nitrogen-containing monomer. The synthesized copolymers based on vinyl chloride surpass the commercial poly(vinyl chloride) in terms of thermal stability and solubility in organic solvents.     

Synthesis and free radical polymerization of 2-methylene-7-oxabicyclo[2.2.1]heptane

A new monomer, 2-methylene-7-oxabicyclo[2.2.1]heptane ( IV ) was synthesized via four steps. Its structure was confirmed by IR, ¹H-NMR, and ¹³C-NMR spectra as well as elementary analysis. Free radical polymerization and copolymerization of IV were investigated. No homopolymer was obtained due to the effect of allyl inhibition. When IV copolymerized with electron-donor monomers, such as vinyl acetate and stvrene, IV acted as inhibitor for the polymerization of vinyl acetate, but could not inhibit the polymerization of styrene. However, the copolymers of IV with electron-accepting monomers, such as methyl methacrylate, acrylonitrile, or maleic anhydride (MA) were obtained. The contents of IV in the copolymers increased as e values of electron-accepting monomers increased. Strictly alternating copolymer was obtained only in the case of MA and IV . The thermal properties of copolymers were investigated. © 1995 John Wiley & Sons, Inc.     

Zur Chemie von Polyhalocyclopentadienen, 22. Mitt.: Über die Herstellung von 1,4,5,6,7,7-Hexachlorbicyclo[2.2.1]hepten-(5)-bishydroxymethylen-(2,3)

Zusammenfassung 1,4,5,6,7,7-Hexachlor-bicyclo[2.2.1]hepten-(5)-bis-hydroxymethylen-(2,3) (I) läßt sich sowohl durch direkte Umsetzung von Hexachlorcyclopentadien (II) und Buten-(2)-diol-(1,4) (III) wie auch durch LiAlH₄-Reduktion von 1,4,5,6,7,7-Hexachlor-bicyclo[2.2.1]hepten-(5)-dicarbonsäure-(2,3) (IV), IV-Anhydrid oder IV-Estern in guter Ausbeute gewinnen.Auf Wunsch der Autoren erscheint diese Abhandlung erst im Herbst 1961.21. Mitt., Dtsch. Bund. Pat. 1 081 886 vom 2. 5. 1958.     

Synthesis and luminescent properties of functionalized polynorbornenes with boron-containing fragments in side chains

Russian Chemical Bulletin - New norbornene monomer, viz., 5-[(bicyclo[2.2.1]hept-5-en-2-ylmethoxy)methyl]-8-[(dimesitylboryl)oxy]quinoline (1), was synthesized. The copolymers based on monomer 1...     

Propagation Mechanism of Radical Copolymerization of Sulfur Dioxide and Vinyl Chloride

Radical copolymerization of sulfur dioxide and vinyl chloride (VC) has been studied by the comparison of the composition of copolymers obtaining from different reaction conditions, i.e., reaction temperatures, feed compositions, and total monomer concentrations. The composition of VC in copolymer is independent of comonomer composition except at high concentration of VC in feed; it increases with increasing reaction temperature or decreasing total monomer concentration. At lower temperature, the composition of copolymer becomes independent of total monomer concentration. The overall rate of polymerization is proportional to [VC]^1,7 and [SO₂]^0.5. These results were compared with those obtained in our previous study on the SO₂-styrene copolymerization. A propagation mechanism for radical copolymerization of SO₂ and VC is also proposed.     

Synthesis of a novel ferrocene derivative having flame-retardant and smoke-suppressant properties

Reaction of ferrocene with chlorendic anhydride (1,4,5,6,7,7-hexachloro-5-norbornene-2,3-dicarboxylic acid anhydride) under Friedel–Crafts reaction conditions affords a new monosubstituted dervative of ferrocene which has significant flameretardant and smoke-suppressant properties when incorporated into poly(vinyl chloride) (PVC). The monocarboxylic acid from the above reaction undergoes smooth methylation with diazomethane to give the corresponding methyl ester. ¹H and ¹³C NMR spectra of these compounds have been compared with those obtained from similar compounds, namely β-ferrocenoylpropanoic acid and its methyl ester. Distant asymmetric centres in the chlorendic anhydride substituent markedly affect the proton spectra of the ferrocene derivative.     

Photochemical and thermal transformations of 7-silabicyclo[2.2.1]Heptadiene and 7-silabicyclo[2.2.1]heptene systems

2,3-Dicarbomethoxy-7,7-dimethyl-7-silabicyclo[2.2.1]hepta-2,5-diene (III) on photolysis gave dimethyl tetraphenylphthalate whereas the photolysis of 7,7-dimethyl-7-silabicyclo[2.2.1]hep-5-ene-2,3-dicarboxylic anhydride (XIa) resulted in the formation of 1,1-dimethyl-2,3,4,5-tetraphenyl-1-silacyclopentadiene (XIIIa). The thermolysis of XIa also gave rise to XIIIa. Similarly, the photolysis as well as thermolysis of 1,4,5,6,7,7-hexaphenyl-7-silabicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic anhydride (XIb) led to hexaphenylsilacyclopentadiene (XIIIb). Attempts to detect radical intermediates in these thermal and photochemical transformations by carrying out the reaction in the presence of hydroquinone, hydrazobenzene, 3,6-diphenyl-1,2-dihydro-1,2,4,5-tetrazine, cumene and tolan were unsuccessful. An attempted preparation of 7-silabicyclo[2.2.1]hepta2,5-dienes by the reaction of silacyclopentadienes such as 1-methyl-1-vinyl2,3,4,5-tetraphenyl-1-silacyclopentadiene (XV) and 1-methyl-1,2,3,4,5-pentaphenyl-1-silacyclopentadiene (XVI) with dimethyl acetylenedicarboxylate resulted in the isolation of dimethyl tetraphenylphthalate indicating that the corresponding 7-silabicyclo[2.2.1]hepta-2,5-dienes are thermally unstable.     

Synthesis of 1,4,5,6,7,7-hexachloro- and hexabromobicyclo-[2,2,1]-5-heptene-2-carboxylic acid vinyl esters and copolymerization with acrylonitrile

1,4,5,6,7,7-Hexachloro- and hexabromobicyclo-[2,2,1]-5-heptene-2-carboxylic acid vinyl esters have been prepared by esterification of the Diels-Alder addition products of hexachloro- and hexabromocyclopentadiene with acrylic acid. These monomers have been copolymerized with acrylonitrile to yield flame-retardant polymers. Copolymers having a chlorine content up to 18.35% or a bromine content up to 6.35% burn, but copolymers containing 25.0% or more of chlorine or 9.83% or more of bromine do not support combustion.     

Chromatographic study of the synthesis of halogenated unsaturated polyesters

The molecular-weight distribution and functionality of polycondensation products of 1,4,5,6,7,7-hexa chloro(hexabromo)bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic anhydride, propylene glycol, and maleic anhydride were studied by size-exclusion chromatography. Conditions were examined for preparing oligoesters with more uniform composition and regular alternation of ester fragments and unsaturated units     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Zur Chemie von Polyhalocyclopentadienen, 20. Mitt.: 2-Methylen-1,4,5,6,7,7-hexachlor-bicyclo[2.2.1]hepten-(5)

Zusammenfassung 2-Methylen-1,4,5,6,7,7-hexachlor-bicyclo[2.2.1]hepten-(5) (IV) läßt sich sowohl durch Abspaltung von 1 Mol Halogenwasserstoff aus 2-Halogenmethyl-1,4,5,6,7,7-hexachlor-norbornenen (III) als auch durch Umsetzung von Hexachlorcyclopentadien mit Allen erhalten.19. Mitt., Dtsch. Bund. Pat.-Anm. R 24 443 IVb/12o vom 24. Nov. 1958; 17. und 18. Mitt.: Mh. Chem.91, 22, 41 (1960); 16. Mitt., l. c. Mh. Chem.¹⁰.Auf Wunsch der Autoren erscheint die Arbeit erst im Herbst 1961     

Synthesis,structural chemistry and antimicrobial activity of −(−) borneol derivative

Borneol is a monoterpene that is a part of traditional Chinese and Japanese medicine. (−) borneol reacted with methanesulfonyl chloride in THF/pyridine to afford the new 1,7,7-trimethylbicyclo[2.2.1]hept-2-yl methane sulfonate derivative in excellent yield. The product is characterized by H1NMR, C¹³NMR, mass spectroscopy as well as elemental analysis and its structure was identified by X-ray single crystal diffraction. The packing of 1,7,7-trimethylbicyclo[2.2.1]hept-2-yl methanesulfonate exhibits the non-classical C-H···O hydrogen bonding in C(4) and R² ₂(8) chain and ring motifs as structural determinants. This was also confirmed by the analysis of Hirshfeld surfaces. The 1,7,7-trimethylbicyclo[2.2.1]hept-2-yl methane sulfonate antimicrobial activity was tested and compared with its parent (−) borneol against three different pathogens. Particularly, 1,7,7-trimethylbicyclo[2.2.1]hept-2-yl methane sulfonate showed high sensitivity, compared to Chloramphenicol reference material, against Escherichia coli.      

New routes for copolymerization of carbon monoxide with styrene or vinyl chloride and photodegradation of these copolymers in solutions

New routes for copolymerization of carbon monoxide with styrene or vinyl chloride were found by emulsion polymerization (nonionic or ionic emulsifier). These procedures yielded copolymers containing carbonyl groups even at high conversion. These carbonyl-containing polyketones were photoirradiated in solvent. In carbon monoxide—styrene copolymer of high molecular weight, the viscosity change produced by photoirradiation was especially remarkable, while in carbon monoxide—vinyl chloride copolymer no pronounced change in viscosity was observed, even at high contents of carbonyl group.     

Poly(vinyl chloride)–poly(ethylene oxide) block copolymers: Synthesis and characterization

Poly(vinyl chloride)-poly(ethylene oxide) block copolymers have been synthesized in solution and emulsion. The polymers were made by first synthesizing macroazonitriles through the reaction of 4,4′-azobis-4-cyanovleryl chloride with hydroxy-terminated poly(ethylene oxide) of varying molecular weights. These macroazonitriles had molecular weights in the range of 3000–88,000 and degrees of polymerization from 5 to 24. Thermal decomposition of the azolinkages in the presence of vinyl chloride monomer yielded block copolymers containing form 2 to 20 wt % poly(ethylene oxide). The structures of the block copolymers were characterized by spectrometric, elemental and molecular weight analyses. The possibility of some graft polymerization occurring via free-radical extraction of a methylene hydrogen from the poly(ethylene oxide) was considered. Polymerization of vinyl chloride with an azonitrile initiator in the presence of a poly(ethylene oxide) yielded predominately homopolymer with some grafted poly(vinyl chloride).     

Development of Carbazole and Bipyridine Copolymers as Novel Photovoltaic Materials

Summary: A novel acrylate polymer with a carbazole pendant group and bipyridine derivatives as side chains was synthesized, in which derivatives of bipyridine as electro-optic chromophores and carbazole as photoconductive moiety were covalently linked to the acrylate backbone. 2–(Carbazol-9-yl)ethyl methacrylate (CEM) and methacrylic 2-[5-(2-{5,5′-dimethyl-6′-[2-(5-pentylthiophen-2-yl)vinyl]-3,3′-bipyridin-6-yl}vinyl)thiophen-2-yl]ethyl methacrylate (BiPy) were synthesized and then copolymerized to give 99:1, 98:2, 92:8 (mol/mol) CEM/BiPy copolymers. Films of the copolymers blended with poly(3-octylthiophene) (P3OT) or poly(3-decylthiophene) (PDT) and sandwiched between the transparent ITO and Al electrode were examined for photovoltaic properties.