Synthesis and characterization of three-coordinate Ni(III)-imide complexes

A new family of low-coordinate nickel imides supported by 1,2-bis(di-tert-butylphosphino)ethane was synthesized. Oxidation of nickel(II) complexes led to the formation of both aryl- and alkyl-substituted nickel(III)-imides, and examples of both types have been isolated and fully characterized. The aryl substituent that proved most useful in stabilizing the Ni(III)-imide moiety was the bulky 2,6-dimesitylphenyl. The two Ni(III)-imide compounds showed different variable-temperature magnetic properties but analogous EPR spectra at low temperatures. To account for this discrepancy, a low-spin/high-spin equilibrium was proposed to take place for the alkyl-substituted Ni(III)-imide complex. This proposal was supported by DFT calculations. DFT calculations also indicated that the unpaired electron is mostly localized on the imide nitrogen for the Ni(III) complexes. The results of reactions carried out in the presence of hydrogen donors supported the findings from DFT calculations that the adamantyl substituent was a significantly more reactive hydrogen-atom abstractor. Interestingly, the steric properties of the 2,6-dimesitylphenyl substituent are important not only in protecting the Ni═N core but also in favoring one rotamer of the resulting Ni(III)-imide, by locking the phenyl ring in a perpendicular orientation with respect to the NiPP plane.     

One-pot Synthesis and Characterization of Poly(meta-aryl sulfide sulfone imide imide)

Poly(meta-aryl sulfide sulfone imide imide) (m-PASSII) was synthesized by one-pot process using 4-chlorophthalic anhydride, 3,3′-diamino diphenyl sulfone and sodium sulfide (Na₂S· xH₂O) as starting materials in N-methyl-2-pyrrolidone at atmospheric pressure. The intrinsic viscosity of m-PASSII was obtained with optimum synthesis conditions is 0.21-0.27 dl/g. The polymer and the separated intermediates which generated during the synthesis process were characterized by elemental analysis, FT-IR spectrum, ¹H-NMR spectrum, X-ray diffraction, DSC, TGA and dissolvability experiment. The polymer is found to have excellent thermal performance with glass transition temperature (T _g ) of 224°C and initial degradation temperature (T _d ) of 441°C. Moreover, the polymer is dissolvable in strong polar solvents.     

Trimethylsilyl bis(Fluorosulfonyl)imide : An Efficient Catalyst for the Addition of Trimethylsilyl Cyanide to Carbonyl Compounds

In the presence of 1 mol% of trimethylsilyl bis(fluorosulfonyl)imide, trimethylsilyl cyanide adds efficiently to carbonyl compounds. The catalyst has been found to be more active than trimethylsilyl triflate for the above reaction.     

Synthesis and Crystal Structure of N-Phenylbis（ferrocenecarboxyl）imide

The ferrocenyl compound,N-phenylbis(ferrocenecarboxyl)imide (C28H23NO2Fe2,Mr=517.17),was synthesized and structurally characterized by means of X-ray single-crystal dif-fraction. It crystallizes in monoclinic,space group C2/c with a=21.374(14),b=10.430(7),c= 10.741(7) ,β=114.184(8)°,V=2184(2) 3,Z=4,Dc=1.573 g/cm3,F(000)=1064,μ(MoKα)= 1.355 mm–1,T=291(2) K,the final R=0.0548 and wR=0.1437 for 1524 observed reflections with I > 2σ(I). In this compound,the nitrogen atom links two ferrocenyl groups and one phenyl group forming a novel imido derivative.     

Synthesis and Photocatalytic Activity of Poly(triazine imide)

Poly(triazine imide) was synthesized with incorporation of Li⁺ and Cl^? ions (PTI/Li⁺Cl^?) to form a carbon nitride derivative. The synthesis of this material by the temperature‐induced condensation of dicyandiamide was examined both in a eutectic mixture of LiCl–KCl and without KCl. On the basis of X‐ray diffraction measurements of the synthesized materials, we suggest that a stoichiometric amount of LiCl is necessary to obtain the PTI/Li⁺Cl^? phase without requiring the presence of KCl at 873 K. PTI/Li⁺Cl^? with modification by either Pt or CoO_x as cocatalyst photocatalytically produced H₂ or O₂, respectively, from water. The production of H₂ or O₂ from water indicates that the valence and conduction bands of PTI/Li⁺Cl^? were properly located to achieve overall water splitting. The treatment of PTI/Li⁺Cl^? with [Pt(NH₃)₄]²⁺ cations enabled the deposition of Pt through ion exchange, demonstrating photocatalytic activity for H₂ evolution, while treatment with [PtCl₆]^2? anions resulted in no Pt deposition. This was most likely because of the preferential exchange between Li⁺ ions and [Pt(NH₃)₄]²⁺ cations.     

Synthesis and Structure of Triphenylbismuth Difluoride

The reaction of triphenylbismuth dichloride with sodium fluoride in acetone leads to formation of triphenylbismuth difluoride in 73% yield. The X-ray diffraction data show that the bismuth atom in the two symmetrically independent molecules of bismuth difluoride has a trigonal-bipyramidal coordination with equatorial fluorine atoms. The Bi-F and Bi-C distances are 2.53(1)-2.59(1) and 2.10(3)-2.22(2) Å, respectively, and the FBiF angle is 175.1(5)°.     

Synthesis and properties of segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers

New segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers were synthesized by the chain extension of α,w-diamine-terminated poly(ether sulfone) oligomer with both aromatic dicarboxylic acid chlorides and tetracarboxylic dianhydrides, respectively. Crystallization of the poly(ether sulfone)unit was suppressed by the introduction of amide or imide linkage along the polymer backbone, giving amorphous copolymers that were +eadily soluble in various organic solvents. The copolymers had somewhat higher glass transition temperatures than the parent poly(ether sulfone). They afforded transparent and tough films by solution casting. © 1992 John Wiley & Sons, Inc.     

Synthesis and characterization of novel hyperbranched poly(imide silsesquioxane) membranes

A new family of hyperbranched polymers with chemical bonds between the hyperbranched polyimide and polysilsesquioxane network was synthesized by the reaction of an amine‐terminated aromatic hyperbranched polyimide with 3‐glycidoxypropyl trimethoxysilane, followed by hydrolysis and polycondensation in the presence of an acid catalyst. The hyperbranched poly(imide silsesquioxane) membranes were fabricated by the casting the aforementioned polymer solution onto a NaCl optical flat, which was followed by heating at 80 °C for 24 h. The membranes were characterized by Fourier transform infrared, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, N₂ adsorption and desorption, and CO₂ adsorption and desorption. The presence of covalent bonds between the hyperbranched polyimide and polysilsesquioxane segments had a significant effect on the properties of the membranes. N₂ adsorption–desorption isotherms for these membranes showed surface areas of 6–16 m²/g, whereas CO₂ adsorption–desorption isotherms showed much higher surface areas in the range of 106–127 m²/g. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3736–3743, 2003     

Synthesis and characterization of fluorinated poly(imide siloxane) block copolymers

Five new block copoly(imide siloxane)s have been prepared by reacting two different diamines, 4,4″-bis(p-aminophenoxy)-3,3″-trifluoromethyl terphenyl (APTTFT) and amino-propyl terminated polydimethylsiloxane (APPS), separately with 4,4′-(4,4′-isopropylidenediphenoxy)bis(phthalic anhydride); BPADA. The reactions were conducted by a two pot solution imidization technique. The diamine APTTFT and the dianhydride BPADA composed the hard block segment while APPS and BPADA composed the soft block segment. The soft and hard blocks of different block lengths were generated by different stoichiometric imbalance in two different flasks and the final polymers were obtained by reacting both the blocks together. Different block copoly(imide siloxane)s were prepared on increasing the hard block lengths (DP) from 7 to 12, 18, 23 and 28 and the soft block lengths (DP) from 4 to 6, 8, 10 and 12, respectively. The resulting polymers have been well characterized by NMR, DSC and DMA techniques. The properties of the block copolymers were compared with the analogous random copolymers and homopolyimide prepared without APPS.     

Synthesis and properties of poly(arylene ether imide ketone)s

Poly(arylene ether ketone)s containing imide units were prepared by the aromatic nucleophilic displacement reaction of the potassium salts of bisphenols with bis(4-fluorobenzoyl)phthalimides in N-methyl-2-pyrrolidone at elevated temperature. The polymers having inherent viscosities of 0.34–0.77 dL/g were obtained in 2 h. The polymers exhibited glass transition temperatures ranging from 216 to 268°C and decomposition temperatures (5% weight loss under air atmosphere) ranging from 450–570°C mainly depending on the bisphenols used in the polymer synthesis. The isothermal TGA measurements (400°C under air or nitrogen atmosphere) revealed that the 4,4'-biphenol- and hydroquinone-based poly(arylene ether ketone imide)s belong to a superior class of heat resistant polymers. The mechanical properties of these polymers are also described. © 1994 John Wiley & Sons, Inc.     

Synthesis of Methyl—substituted Phthalazinone—based Aromatic Poly（amide imide）s

A series of novel aromatic poly (amide imide)s containing phthalazinone moietics were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with our diimide-dicarboxylic acids by Yamazaki phosphorylation method with the inherent viscosity of 0.36-0.65 dL/g. These polymers had high glass transition temperatures above 300℃ and they lost 10% weight between 426-475℃ in N2. The structure of diamine 1 and the polymers was confirmed by IR,^1H NMR and MS. The obtained polymers were readily soluble in polar solvents such as NMP,m-cresol etc. and easily cast into tough,flexible films. The X-ray indicated that they are all amorphous.     

Poly(arylsulfone imide) as E-beam resist: Synthesis and radiolysis

Aromatic diamines containing ? SO₂? and ? S? moieties have been used to prepare soluble polyimides with ditrifluoromethyl methane bis(phthalic anhydride) (F-series polyimides) and polyamic acid with pyromellitic dianhydride (P-series). Gamma radiolysis gave G(S) values for scission between 1 to 2 with no crosslinking. Significant weight loss occurred with radiolysis is attributable to efficient ? SO₂? bond scission for the F-series polyimides, as well as imidization in the cases of P-series polyamic acids.