Synthesis and characterization of wholly aromatic polyesters derived from 1-phenyl-2,6-naphthalene-dicarboxylic acid and aromatic diols

A series of new wholly aromatic polyesters was synthesized by melt polycondensation of 1-phenyl-2,6-naphthalenedicarboxylic acid (PNDA) and diacetates of various aromatic diols. The aromatic diols studied are hydroquinone (HQ), methylhydroquinone (MHQ), phenylhydroquinone (PHQ), (α-phenylisopropyl)hydroquinone (PIHQ), 2,6-naphthalenediol (2,6-ND), 1,4-naphthalenediol (1,4-ND), and 4,4′-biphenol (BP). These polyesters were characterized for their crystallinity, glass transition temperature (T_g), melting temperature (T_m), liquid crystallinity, and thermal stability. In general, crystallinity of the polyesters are very low and the T_g values of the polyesters range from 150 to 172°C depending on the structure of aromatic diols. All of the polymers formed nematic phases above their T_m or T_g. The polyesters derived from PHQ and PIHQ are soluble in chlorinated hydrocarbon solvents. The initial decomposition temperatures of the polyesters are above 400°C under N₂ atmosphere. © 1996 John Wiley & Sons, Inc.     

Synthesis of sterically hindered 1-arylpyrrolidines and 1-arylpiperidines by condensation of primary aromatic amines with cyclic ethers or diols

A variety of 1-($\text{o}$-alkylphenyl)- and 1-($\text{o}$-$\text{o}$'-dialkylphenyl)- pyrrolidines and -piperidines were prepared by the gas phase alumina mediated condensation of tetrahydrofuran (THF), tetrahydropyran (THP) or the corresponding diols with primary aromatic amines in fair to high yield. This methodology can also be used for the synthesis of 1-phenylhexahydroazepine from aniline. A mechanistic interpretation of the catalytic action of alumina is presented.     

Synthesis and characterization of soluble aromatic polyesters derived from substituted terphenyl and quinquephenyl diols

Rigid aromatic polyesters containing alkoxy or phenyl-substituted oligophenyls were prepared. Soluble polymers were obtained also in cases where phenyl-substituted quinquephenyl diols were combined with asymmetric phenyl-substituted terephthalic acid. The synthesized polyesters were characterized by viscosimetry, gel permeation chromatography, thermal analysis, and dynamic mechanical analysis. The temperature dependence of the intrinsic viscosity was sensitive to the type of side groups. Thermogravimetry has shown that polyesters with aromatic substituents were stable up to 380–400°C. The glass transition temperatures of the polyesters with aromatic side groups were in the 220–260°C range as determined by DSC. Polyesters with hexyloxy side chains show crystallinity. Dynamic mechanical analysis showed that in the cases where aromatic substituents were used to increase solubility, the obtained polymers have very useful mechanical properties at high temperatures. The polymer having the quinquephenyl unit in the main chain has an almost constant modulus up to 340°C. © 1996 John Wiley & Sons, Inc.     

Phosphorylation of aromatic diols with phosphorous acid triamides with bulky substituents

Phosphorylation of naphthodiols with hexaisopropyl- and hexabutyltriamides of phosphorous acid was studied for the first time. The features of these reactions were considered. A comparative analysis of the properties of the synthesized naphthophosphacyclophanes and dismutation of bisamidophosphites was performed.     

New thermally stable polyesters based on 2,5-pyridinedicarbonyl dichloride and aromatic diols:Synthesis and characterization

Six new thermally stable polyesters(4a-f) were synthesized through the solution polycondensation reaction of 2,5-pyridine dicarbonyldichloride(2) with six aromatic diols in N,N'-dimethyl acetamide(DMAc) solution and in the presence of pyridine as a base.The polycondensation reactions produce a series of new polyesters(4a-f) in high yields,and inherent viscosity between 0.30 and 0.55 dL/g.The resulting polyesters were characterized by elemental analysis,viscosity measurements,thermal gravimetric analysis(...     

二醇及氨基醇类鬼臼毒素衍生物的合成

以天然产物鬼臼毒素(1)为原料，合成了四种二醇及氨基醇类鬼臼毒素衍生物：4-O-乙基表鬼臼苦醇(4)，(1R,2S,3R,4S)-1-3',4',5'-三甲氧基苯基-2-氨甲基-3-羟甲基-4-乙氧基-6,7-亚甲二氧基-1,2,3,4-四氢萘(5)，(1R,2S,3R,4S)-1-3',4',5'-三甲氧基苯基-3-羟甲基-2-氨基-4-乙氧基-6,7-亚甲二氧基-1,2,3,4-四氢萘(6)和4-O-异丙基表鬼臼苦醇(7)。4～7及中间产物8～11都是新化合物。     

Synthesis of aromatic polyamides by 1-hydroxybenzotriazole-catalyzed polycondensation of active aromatic diesters with aromatic diamines

Catalytic actions of various additives were studied in the polycondensation of di(4-nitrophenyl) isophthalate with bis(4-aminophenyl) ether in N-methyl-2-pyrrolidone, and 1-hydroxybenzotriazole (HOBt) was found to be a highly effective catalyst that yielded high-molecular-weight polyamide. In addition to the polycondensation of the 4-nitrophenyl ester, the polymerization of negatively substituted phenyl esters like di(2,4,5-trichlorophenyl) isophthalate was also accelerated by HOBt. For the HOBt-catalyzed aminolysis of esters a bifunctional concerted mechanism that involves an eight-membered transition state was proposed.     

Synthesis of polyamides from diols and diamines with liberation of H2

The amidation reaction based on catalytic coupling of alcohols with amines previously reported by us, using the pincer complexes 1 and 2 as catalysts, was applied to the generation of polyamides from nonactivated diols and diamines. A range of polymers was prepared, with M_n up to 26.9 kDa. Unlike the traditional syntheses of polyamides based on carboxylic acid derivatives, which require the use of toxic reagents and generate stoichiometric amounts of waste, this process generates only molecular hydrogen as byproduct. Both aromatic and aliphatic diols and diamines were used. Gel permeation chromatography measurements of the dimethylformamide‐soluble polymers and thermal studies of the polyamides were performed. Matrix assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) spectra are also reported. Thermogravimetric analyses studies indicate that the aromatic polyamides (with the exception of the pyridine‐based polyamide) are more thermally stable than the aliphatic ones. This general, environmentally benign method for the synthesis of polyamides is homogeneously catalyzed under neutral conditions by dearomatized ruthenium‐pincer complexes 1 and 2 and proceeds in 1,4‐dioxane under an inert atmosphere. Conditions for polyamidation in the absence of solvent are also reported, using the pincer complex 2 as catalyst. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of N-heterocyclic diols by diastereoselective pinacol coupling reactions

A series of 5-8 membered N-heterocyclic diols have been prepared from acyclic dicarbonyls via diastereoselective pinacol reactions whereby cis- or trans-diol stereoselectivity is controlled by the choice of low-valent metal reagent used.     

Synthesis of aromatic polyimines by the condensation of aromatic dialdehyde and diamine

Film-forming aromatic polyimines were prepared by low temperature solution polymerization of aromatic dialdehyde and aromatic diamine usingm-cresol. The polymerization proceeded rapidly to give high molecular weight polyimine solutions. Fibrous polymers were precipitated by pouring the solutions into anhydrous methanol. Lemon yellow-to-orange films were cast in situ from the reaction solutions. The polymers showed typical C=N stretching absorption near 1620 cm^?1 in infrared spectra and had high glass transitions of over 200 ?C but showed low crystallinity.     

Synthesis and characterization of new polyesters based on 2,5-bis[(4-chloro carboxyanilino) carbonyl] pyridine and aromatic diols

<正>Six new polyesters 7a-f were synthesized through the solution polycondensation reaction of diacid chloride 5 with six aromatic diols 6a-f in N,N-dimethyl acetamide(DMAc) as solvent in the presence of pyridine as base.The polycondensation reaction produced a series of novel polyester containing pyridyl moiety in the main chain in high yields with inherent viscosities between 0.35 and 0.54 dL/g.The resulted polymers were fully characterized by means of FT-IR spectroscopy,elemental analyses,inherent viscosity and solubility tests.Thermal properties of these polymers were investigated by using thermal gravimetric analysis(TGA) and differentional thermal gravimetric(DTG).The glass-transition temperatures of these polyesters were recorded between 130 and 170℃by differential scanning calorimetry(DSC) and the 10%weight loss temperatures were ranging from 390 to 450℃under nitrogen.     

Quinoline Synthesis by the Reaction of Anilines with 1,2‐diols Catalyzed by Iron Compounds

The synthesis of quinoline derivatives by cyclocondensation of anilines with 1,2‐ethanediol, 1,2‐propanediol, and 1,2‐butanediol in the presence of iron‐containing catalysts was performed for the first time.     

Synthesis of aromatic polyesters by direct polycondensation with triphenylphosphine dichloride

Aromatic polyesters of high molecular weights were prepared by the direct polycondensation reaction of dicarboxylic acids and bisphenols or hydroxybenzoic acids with triphenylphosphine dichloride as a new condensing agent. Reaction conditions, including the amount of reagents and the concentration of monomer, solvent, and acid acceptor, were investigated. The aromatic polyester with the solution viscosity of 1.66 dL/g was obtained from bisphenol. A and terephthalic and isophthalic acid in quantitative yield under the optimum condition. The principal advantage of this condensing agent is that, based on the recycling system, recovered triphenylphosphine oxide can be reconverted to the reactive triphenylphosphine dichloride by treating with phosgene or oxalyl chloride.     

Polyepichlorohydrin diols free of cyclics: Synthesis and characterization

Polymerization of epichlorohydrin (ECH) in the presence of diols, catalyzed by Lewis or protic acids, proceeds by activated monomer mechanism (AMM), i.e., by subsequent additions of protonated monomer molecules to the terminal hydroxyl groups of the growing chain. As opposed to the typical active chain end mechanism, side reactions, including cyclization, are strongly suppressed in the polymerization by AMM and well-defined linear product are obtained. It follows from kinetic considerations, that in order to achieve the high contribution of AMM, the reaction should be carried out at low instantaneous concentration of monomer, and this can be accomplished by slowly adding ECH to the reaction mixture. Using this approach, polyepichlorophydrin diols have been prepared in the M?_n ～ 2500 products with DP _n = [M]₀/[I]₀ can be obtained practically free of cyclic by-products with the yields approaching quantitative. Polyepichlorohydrin diols obtained by AM polymerization are strictly bifunctional, regular head-to-tail polymers containing mainly (≥ 95%) secondary hydroxyl and groups.     

Gas chromatographic-mass spectrometric analysis of diols and tetrols from reactions of polycyclic aromatic hydrocarbon epoxides with hemoglobin

We have evaluated both electron ionization (EI) and negative-ion chemical ionization (NICI) methods for the analysis of trimethylsilyl derivatives of a series of polycyclic aromatic hydrocarbon (PAH) alcohols including styrene diol, benzo[e]pyrene diol and tetrols, cyclopenta[c,d]pyrene diols, benzo[a]pyrene-4,5-diols, chrysene tetrols, benz[a]anthracene tetrols I and II, and syn- and anti-benzo[a]pyrene tetrols. NICI is the more sensitive method for all compounds except styrene diol. Detection limits are compound-dependent and range from 1 fmol for cyclopenta[c,d]pyrene diol to 1 pmol for benzo[e]pyrene diol. The EI detection limit for styrene diol is 60 fmol. PAH alcohols related to the compounds listed above were observed following hydrolysis of hemoglobin which had been reacted with PAH epoxides in vitro. Benzo[a]pyrene tetrols and a chrysene tetrol were observed following hydrolysis of hemoglobin isolated from human smokers' blood. Hydrolysis of styrene oxide treated hemoglobin in 18O-labeled water revealed at least two mechanisms of ester hydrolysis, including the BAL 1 pathway.     

Synthesis of new ethynylene-containing aromatic polyamides by palladium-catalyzed polycondensation of aromatic diiodides with aromatic diethynyl compounds having amide units

New ethynylene-containing aromatic polymides were synthesized by the carbon–carbon crosscoupling polycondensation of aromatic diiodides with aromatic amide-bearing diethynyl compounds in the presence of a palladium catalyst, cuprous iodide, and an organic base. The polymers having sulfone linkages were soluble in various organic solvents and their weight average molecular weights were in the range of 12,500 and 26,500. The polymers with the highest inherent viscosity were obtained, when the monomer ratio of a diethynyl compound to a diiodide was 1.01. The polymers showed no detectable glass transition temperature and no weight loss up to around 300° C in nitrogen. The thermal crosslinking of the polymers occurred at 280°C through the existing internal ethynylene group. © 1995 John Wiley & Sons, Inc.