Synthesis of ordered copolyamides by the interfacial polycondensation of the hydrolyzate of bisimidazoline with diacid chloride

Ordered copolyamides were prepared by the interfacial polycondensation of the hydrolyzate of bisimidazoline in the aqueous solution with diacid chloride in chloroform solution; bisimidazolines used were 1,4-bis(imidazoline-2-yl)butane and 1,4-bis(imidazoline-2-yl)-octane; diacid chlorides used were adipoyl chloride, sebacoyl chloride, and terephthaloyl chloride. The aqueous solutions of the hydrolyzates of bisimidazolines were prepared by heating the aqueous solutions of imidazolines at 70°C. It was shown by infrared spectra and paper electrophoresis of the hydrolyzates that bisimidazolines were hydrolyzed to give quantitatively diamines containing amides linkages of the type H₂N(CH₂)₂NH-CORCONH(CH₂)₂NH₂. The regularity in the sequence of the copolyamide of nylon 26 and nylon 2T prepared from the hydrolyzate of 1,4-bis(imidazoline-2-yl)butane and terephthaloyl chloride was studied by NMR spectrometry: it was concluded that the copolyamide was highly ordered.     

Synthesis of α,ω-bis(pyrazol-3-yl)alkanes: I. 1,4-bis(1-methyl- and 1-benzyl-5-chloro-1<Emphasis Type="Italic">H</Emphasis>-pyrazol-3-yl)-butanes from 1,1,10,10-Tetrachlorodeca-1,9-diene-3,8-dione and 1,1-dimethyl- or benzylhydrazine

First representatives of bis-2-chloro- and 2,2-dichlorovinyl ketones, 1,10-dichlorodeca-1,9-diene-3,8-dione and 1,1,10,10-tetrachlorodeca-1,9-diene-3,8-dione, were synthesized by reaction of hexanedioyl dichloride with acetylene and 1,1-dichloroethene, respectively, in the presence of AlCl₃. 1,1,10,10-Tetrachlorodeca-1,9-diene-3,8-dione reacted with benzylhydrazine and 1,1-dimethylhydrazine to give 1,4-bis(1-benzyl-5-chloro-1H-pyrazol-3-yl)butane and 1,4-bis(5-chloro-1-methyl-1H-pyrazol-3-yl)butane, respectively.     

Synthesis and characterization of new aromatic polyesters and polyethers derived from 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene

New polyarylates and aromatic polyethers were synthesized from 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene, and aromatic dicarboxylic acid chlorides and aromatic dihalides, respectively. The polyarylates having inherent viscosities of 0.28–1.05 dL/g were synthesized by either the two-phase method or the high-temperature solution method. All the polymers were easily soluble in N-methyl-2-pyrrolidone, N,N-dimethylformamide, pyridine, m-cresol, 1,4-dioxane, and 1,1,2,2-tetrachloroethane. They have glass transition temperatures in the range of 217–250°C and showed no weight loss below 315°C in both air and nitrogen atmospheres. Aromatic polyethers with inherent viscosities of 0.85–1.21 dL/g were obtained by the polycondensation of 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene and aromatic difluorides in the presence of potassium carbonate. These polymers having glass transion temperatures of 193–220°C were also soluble in the aforementioned solvents and stable up to around 350deg;C in both atmospheres. © 1994 John Wiley & Sons, Inc.     

Coordination polymers with adjustable dimensionality based on CuII and bis-imidazolyl bridging ligand

1,4-Bis(imidazol-1-yl)butane was synthesized from imidazole and 1,4-dibromobutane in an alkaline medium. A variation of the molar ratio of reagents in the system copper(II) chloride dihydrate and 1,4-bis(imidazol-1-yl)butane (bImB) upon heating in N,N-dimethylformamide resulted in the synthesis of two new coordination polymers [Cu(bImB)Cl₂] (1) and [Cu(bImB)₂Cl₂] (2), which were structurally characterized. Product 1 was found to possess a chain structure, while structure 2 is built of neutral layers, with the dimensionality of the extended coordination structures being determined by the reaction conditions. The new compounds were characterized by IR spectroscopy, elemental analysis, and powder X-ray diffraction data.

     

Synthesis and properties of new organosoluble and alternating aromatic poly(ester-amide-imide)s with pendant phosphorus groups

New phosphorus-containing aromatic diesteramines, 1,4-bis(4-aminobenzoyloxy)-2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)naphthalene (p- 3 ) and 1,4-bis(3-aminobenzoyloxy)-2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)naphthalene (m- 3 ), were synthesized by the reaction of 2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)-1,4-naphthalenediol with 4-nitrobenzoyl chloride and 3-nitrobenzoyl chloride, respectively, followed by catalytic reduction. Two series of phosphorus-containing aromatic poly(ester-amide-imide)s with inherent viscosities of 0.94–2.00 and 0.41–0.56 dL/g were prepared via low-temperature solution polycondensation from p- 3 and m- 3 , respectively, with three imide ring-preformed diacid chlorides. All the poly(ester-amide-imide)s were amorphous and readily soluble in many organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc or NMP solutions. Their casting films possessed a tensile strength range of 118–181 MPa, an elongation to break of 5–11%, and an initial modulus range of 2.41–4.46 GPa. They had useful levels of thermal stability associated with relatively high glass-transition temperatures (264–286 °C) and 10% weight-loss temperatures in excess of 450 °C in nitrogen or air. The limiting oxygen indices of these polymers were 41–46. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1786–1799, 2001     

Synthesis and properties of novel poly(N-oxyimide)s

Novel poly(N-oxyimide)s (PNOI) were synthesized by the room temperature polycondensation of N,N′-dihydroxypyromellitimide (I) with dichloro compounds in N,N-dimethylformamide (DMF) in the presence of triethylamine both as base as well as catalyst. The dichloro compounds used were 1,4-bis(chloromethyl)-2,5-dimethylbenzene (II), 1,5-bis(chloromethyl)-2,4-dimethylbenzene (III), 1,4-bis(chloromethyl)-2,5-dimethoxybenzene (IV) and 1,4-dichlorobut-2-yne (V). Polymer synthesis, characterization, and properties such as density, viscosity, solubility, crystallinity, and thermal stability were described. Two model compounds, viz. (i) MNOI-1 from N-hydroxyphthalimide and a dichloro compound (III), (ii) MNOI-2 from I and benzyl chloride were also synthesized to confirm the formation of polymers. The polymers thus obtained had high intrinsic viscosities in the range 1.09–1.18 dl/g. The thermal decomposition of the polymers started around 260°C with 20–25% decomposition and about 50% weight loss was observed at 400°C.     

Synthesis and characterization of new poly(amide–imide)s from 1,4-bis(4-trimellitimidophenoxy)-2-tert-butylbenzene with various diamines

New poly(amide–imide)s were prepared from a diimide–dicarboxylic acid, 1,4-bis(4-trimellitimidophenoxy)-2-tert-butylbenzene ( BTTB ), with various diamines by the direct polycondensation in N-methyl-2-pyrrolidinone (NMP) using triphenyl phosphite and pyridine as condensing agents. The new diimide–dicarboxylic acid BTTB containing an ether linkage and tert-butyl substituent was synthesized by the condensation reaction of 1,4-bis(4-aminophenoxy)-2-tert-butylbenzene with trimellitic anhydride. All the polymers were obtained in quantitative yields with inherent viscosities of 0.62–1.06 dL g⁻¹. The polymers were amorphous, and most of them were readily soluble in aprotic polar solvents such as NMP, N,N-dimethylacetamide (DMAc), and N,N-dimethylformamide (DMF), as well as in less polar solvents such as dimethyl sulfoxide (DMSO), m-cresol, pyridine, and γ-butyrolactone, and also even in tetrahydrofuran. The glass transition temperatures of the polymers were determined by DSC method, and they were in the range of 238–279°C. These polymers were stable up to 408–449°C in air and 451–483°C in nitrogen and lose 10% weight in the range of 479–525°C in air and 480–528°C in nitrogen atmosphere. The polymer films had a tensile strength range of 71–115 MPa, an elongation at break range of 4–14%, and a tensile modulus range of 2.3–3.1 GPa. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2301–2307, 1998     

Preparation and properties of aromatic polyamides from 1,4-bis(p-carboxyphenoxy)naphthyl and aromatic diamines

A new aromatic dicarboxylic acid, 1,4-bis (p-carboxyphenoxy)naphthyl ( 3 ), was synthesized by the reaction of p-fluorobenzonitrile with 1,4-naphthalenediol, followed by hydrolysis. Aromatic polyamides having inherent viscosities of 1.27–2.22 dL/g were prepared by the triphenyl phosphite activated polycondensation of diacid 3 with various aromatic diamines. Most of the resulting polymers showed an amorphous nature and were readily soluble in a variety of organic solvents including N,N-dimethyl-acetamide (DMAc), N-methyl-2-pyrrolidone (NMP), and m-cresol. Transparent, tough, and flexible films of these polymers could be cast from the DMAc or NMP solutions. The cast films had tensile strengths ranging from 64–104 MPa, elongations-at-break from 6 to 10%, and initial moduli from 1.52 to 2.14 GPa. These polyamides had glass transition temperatures in the range of 195 to 240°C. Almost all polymers were thermally stable up to 400°C, with 10% weight loss being recorded above 480°C in air and nitrogen atmospheres. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2273–2280, 1997     

Kinetic and spectroscopic investigations of aqueous micelles of cationic surfactants

The aqueous micellar solutions of monocationic surfactants N-hexadecyl-N,N,N-trimethylammonium bromide (CTABr), N-hexadecyl-N,N,N-trimethylammonium nitrate (CTANO₃), N,N,N-tributyl-N-hexadecylammonium bromide (CTBABr) and gemini surfactants 1,4-bis(N-hexadecyl-N,N-dimethylammonium)ethane dibromide (C-E-C2Br), 1,4-bis(N-hexadecyl-N,N-dimethylammonium)propane dibromide (C-P-C2Br), and 1,4-bis(N-hexadecyl-N,N-dimethylammonium)butane dibromide (C-B-C2Br) were studied with a solvatochromic probe, 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate, better known as Reichard’s ET-30 dye. The local polarity at the probe site (E_T) was calculated from the wavelength maximum of the lowest-energy intramolecular charge-transfer ϖ-ϖ* absorption band of ET-30. The results were compared with a kinetic investigation of the cyclization of 2-(3-bromopropyloxy)phenoxide (PhBr7) in micelles; this reaction is a model for S_N2 reactions and it depends on medium polarity.     

Synthesis and characterization of biodegradable polyesteramides constructed mainly by alternating diesterdiamide units from N,N′-bis(2-hydroxyethyl)-adipamide and diacids

Two kinds of aliphatic alternating polyesteramide prepolymers were prepared through melt polycondensation from N,N’-bis(2-hydroxyethyl)-adipamide and adipic acid or sebacic acid. Chain extension of them was conducted with 2,2′-(1,4-phenylene)-bis(2-oxazoline) and adipoyl biscaprolactamate as combined chain extenders. The chain extended polyesteramides (ExtPEAs) were characterized by IR, 1 H-NMR, differential scanning calorimetry, thermogravimetric analysis, wide angle X-ray scattering, tensile test and enzymatic degradation. The results showed that the ExtPEA(4,m)s were mainly constituted with the diester adipamide alternating units. ExtPEA(4,4) and ExtPEA(4,8) had Tm of 83.8℃ and 85.8℃ and initial decomposition temperature above 310.0℃. They crystallized similarly as Nylon-66 did and were flexible thermoplastic materials with tensile strength up to 25.64 MPa and strain at break up to 737%.     

Preparation and some properties of nylon 46

Nylon 46 was synthesized from the salt of 1,4-diaminobutane and adipic acid. High molecular weight polymers could be obtained by reaction for 1 hr at 215°C in a closed system and at least for 1 hr in vacuo at a temperature in the range 290–305°C. The reactions at 290°C were found to have taken place in the solid state and those at 305°C in the melt. The highest molecular weights (M?_w ca. 45,000) were obtained by reaction at 290°C with a nylon salt with a pH of 7.8–8.0. The molecular weight characteristics were studied with end-group analysis, viscometry, light scattering, and ultracentrifugation. The polymers were found to be gel-free and monodisperse (M?_w/M?_n ～ 1.15). Films could be cast from formic acid. From x-ray diffraction patterns, measured on such films, spacings of 3.74 and 4.30 Å were calculated, whereas a long period of 66 Å was also found. The infrared spectra showed all the usual amide bands of even–even polyamides. The melting temperature was found to vary between 283 and 319°C, depending on the thermal history of the sample. Water absorption measured on a cast film showed this to be very hygroscopic (7.5% at 65% RH), while a highly crystalline sample absorbed only little water (1.6% at 65% RH).     

Synthesis and properties of polyimides derived from 1,4-bis(4-aminophenoxy)2,5-di-tert-butylbenzene

Novel aromatic polyimides containing symmetric, bulky di-tert-butyl substituents unit were synthesized from 1,4-bis(4-aminophenoxy)2,5-di-tert-butylbenzene (BADTB) and various aromatic tetracarboxylic dianhydrides by the conventional two-stage procedure that included ring-opening polyaddition in a polar solvent such as N,N-dimethylacetamide to give poly(amic acid)s, followed by cyclodehydration to polyimides. The diamine was prepared through the nucleophilic displacement of 2,5-di-tert-butylhydroquinone with p-chloronitrobenzene in the presence of K₂CO₃, followed by catalytic reduction. Depending on the dianhydrides used, the poly(amic acid)s obtained had inherent viscosities of 0.83–1.88 dL g⁻¹. Most of the polyimides formed transparent, flexible, and tough films. Tensile strength and elongation at break of the BADTB-based polyimide films ranged from 68–93 MPa and 7–11%, respectively. The polyimide derived from 4,4′-hexafluoro-isopropylidenebisphathalic anhydride had better solubility than the other polyimides. These polyimides had glass transition temperatures between 242–298°C and 10% mass loss temperatures were recorded in the range of 481–520°C in nitrogen. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1527–1534, 1997     

Polyimides derived from 1,2-bis(4-aminophenoxy)propane

The diamine 1,2-bis(4-aminophenoxy)propane, containing the flexible 1,4-dioxa-2-methylbutyl-ene unit, was synthesized. Polyimidization was carried out with 5,5′-[2,2,2-trifluoro-(trifluoromethyl)ethylidine]bis-1,3-isobenzofurandione in m-cresol employing toluene as azeotroping agent to yield a polyimide that was soluble in a variety of solvents and had an inherent viscosity of 0.84 dL/g in N,N-dimethylformamide. Poly(amic acid) formation with pyromellitic dianhydride, 4,4′-carbonyldiphthalic anhydride, and 5,5′-[ethanediylbis(oxy)]-bis-1,3-isobenzofurandione was carried out in N,N-dimethylformamide with imidization completed by heating at 160°C for 24 h under vacuum. All of the polyimides exhibited a 5% weight loss in air and in helium by 420°C.     

Synthesis and characterization of new soluble aromatic polyimides from 3,4-bis (4-aminophenyl)-2,5-diphenylfuran and aromatic tetracarboxylic dianhydrides

New soluble polyimides with inherent viscosities of 0.2–0.6 dL/g were synthesized from 3,4-bis (4-aminophenyl)-2,5-diphenylfuran and various aromatic tetracarboxylic dianhydrides by the conventional two-step method which involved ring-opening polyaddition and subsequent cyclodehydration. Almost all of the polymides were generally soluble in a wide range of organic solvents such as N,N-dimethylacetamide, 1,3-dimethyl-2-imidazolidone, m-cresol, o-chlorophenol, and pyridine. The polyimide prepared from pyromellitic dianhydride was crystalline, whereas the other polyimides were amorphous. All the polyimides have glass transition temperatures in the range of 281–344°C and showed no appreciable weight loss up to 410°C in both air and nitrogen atmospheres.     

Synthesis and characterization of new soluble aromatic polyimides from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and aromatic tetracarboxylic dianhydrides

Novel aromatic polyimides containing tetraphenylpyrrole unit were synthesized from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and various aromatic tetracarboxylic dianhydrides by the usual two-step procedure that included ring-opening polyaddition and subsequent thermal cyclodehydration. These polymers had inherent viscosities in the 0.20–0.65 dL/g range and were practically amorphous as shown by the X-ray diffraction studies. All the polyimides except for polypyromellitimide were easily soluble in a wide range of organic solvents such as o-chlorophenol, pyridine, 1,3-dimethyl-2-imidazolidone, N,N-dimethylacetamide, and N-methyl-2-pyrrolidone at room temperature. These polyimides had high glass transition temperatures of 302–359°C and exhibited 10% weight loss at temperatures above 510°C in nitrogen.     

Synthesis and characterization of aliphatic poly(esteramide)s containing symmetrical bisamide blocks

A series of symmetrical diols were synthesised through ring-opening of lactones with different ring sizes by alkane diamines in moderate to good yields. Ring-opening of the dilactones glycolide and lactide with a diamine in equimolar amounts afforded symmetrical diols in quantitative yield. Aliphatic poly(ester-amide)s were prepared by polycondensation of N,N′-bis(caproyl)butane diamide, dimethyl adipate and 1,4-butanediol. The structure of the diamide was retained in the polymer. The polymers synthesized are semi-crystalline materials that possess ordered structures in the solid phase over almost the entire copolymer range. Depending on thermal history and copolymer composition thermal analyses is in agreement with the presence of pseudo-hexagonal crystal structures below 75°C, a fast melting recrystallization at this temperature and a triclinic structure at higher temperatures.     

Synthesis of π-conjugated poly(arylene)s by polycondensation of 1,4-bis(3-methylpyridin-2-yl)benzene and aryl dibromides through regiospecific C-H functionalization process

On the basis of the Ru-catalyzed regiospecific direct double arylation of benzene rings possessing 3-methylpyridin-2-yl substituents to produce 1-aryl-2-(3-methylpyridin-2-yl)benzene derivatives, the synthesis of poly(p-phenylene) derivatives having 2,5-bis(3-methylpyridin-2-yl) substituents is described. The reaction of 1,4-bis(3-methylpyridin-2-yl)benzene with bromobenzene (2 equiv) was carried out in the presence of [RuCl₂(η⁶-C₆H₆)]₂ (5 mol %) in 1-methyl-2-pyrrolidone at 120°C for 24 h to produce 1,4-bis(3-methylpyridin-2-yl)-2,5-diphenylbenzene in 99% yield as a sole product. Neither 2,6-diphenylated nor further phenylated products was produced under the examined conditions. This regiospecific double arylation process was then applied to the synthesis of π-conjugated polymers by use of aryl dibromides such as 1,4-dibromobenzene, 2,7-dibromo-9,9-dihexylfluorene, and 2,5-dibromothiophene. For example, a polymer was obtained in 73% yield by using 1,4-dibromobenzene, whose M_n and M_w/M_n were estimated to be 3300 and 1.51, respectively. The bathochromic shift of the ultraviolet (UV)–visible absorption spectrum with respect to that of the model compound, 1,4-bis(3-methylpyridin-2-yl)-2,5-diphenylbenzene, indicated the extension of the π-conjugation. The blue fluorescence was also observed for the polymer upon the UV irradiation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2771–2777     

Synthesis of 1-and 3-substituted imidazo[4,5-b]pyridin-2-ones

1-and 3-Substituted imidazo[4,5-b]pyridin-2-ones were synthesized by heating equimolar amounts of 3-amino-2-chloropyridine or 2-chloro-3-methylaminopyridine, urea, and the corresponding arylamine at 150–210°C. The reaction of 3-amino-2-chloropyridine with urea and p-phenylenediamine or p,p′-diaminobiphenyl at a ratio of 2:2:1 under analogous conditions gave 1,4-bis-(2-oxoimidazo[4,5-b]pyridin-3-yl)benzene or 1,4-bis(2-oxoimidazo[4,5-b]pyridin-3-yl)biphenyl, respectively.     

Thermal Studies of New Lead(II) Coated‐Wire Membrane Electrodes

Five plastic membrane Pb²⁺‐selective electrodes were prepared based on 1,4‐bis(N‐tosyl‐o‐aminophenoxy)butane I , 1,4‐bis(N‐allyl‐N‐tosyl‐o‐aminophenoxy)butane II , 1,4‐bis(N‐benzyl‐N‐tosyl‐o‐aminophenoxy)butane III , 1,4‐bis[N‐(o‐allyloxybenzyl)‐N‐tosyl‐o‐aminophenoxy]butane IV , and 1,4‐bis(N‐octyl‐N‐tosyl‐o‐aminophenoxy)butane V as neutral carriers. The electrodes exhibited nearly Nernstian responses over the concentration ranges, 2.5×10^?4–4.0×10^?2, 2.5×10^?5–4.0×10^?2, 7.9×10^?5–4.0×10^?2, 2.2×10^?5–4.0×10^?2, and 1.9×10^?4–4.0×10^?2 M for electrodes composed with the ionophores I–V , respectively. All electrodes showed pH range of about 4.0 to 11.5 and working temperature range of 22 to 70 °C with isothermal temperature coefficients of 1.19×10^?3, 1.16×10^?3, 1.16×10^?3, 1.00×10^?3 , and 1.32×10^?3 V/°C for electrodes I–V respectively.     

Synthesis and characterization of novel polyarylates from 2,5-bis(4-hydroxyphenyl)-3,4-diphenylpyrrole and various aromatic dicarboxylic acids

A new tetraphenylated heterocylic diol, 2,5-bis(4-hydroxyphenyl)-3,4-diphenylpyrrole, was synthesized in three steps starting from 4-methoxydeoxybenzoin. The tetraphenylpyrrole-containing polyarylates having inherent viscosities of 0.28–0.88 dL/g were prepared from the diol and various aromatic dicarboxylic acid chlorides by both phase transfer catalyzed two-phase polycondensation and high temperature solution polymerization methods. All the polyarylates were semi-crystalline, and were readily soluble in a variety of solvents including N-methyl-2-pyrrolidone, m cresol, pyridine, and 1,4-dioxane. These polymers had glass transition temperatures in the range of 223–279°C, with no weight loss below 400°C in both air and nitrogen atmospheres. © 1994 John Wiley & Sons, Inc.