Preparation and radical ring-opening polymerization of exo-methylene substituted cyclic ketene acetals

Preparation and radical ring-opening polymerization of the exo-methylene substituted cyclic ketene acetals, 2,4-dimethylene-1,3-dioxolane ( I ) and 2,5-dimethylene-1,3-dioxane ( II ), were carried out. Ketene acetals I and II were prepared by dehydrohalogenation of the corresponding cyclic haloacetal with potassium tert-butoxide in tetrahydrofuran at –78°C and ambient temperature, respectively. I underwent radical polymerization with essentially quantitative ring-opening with di-tert-butyl peroxide in dimethylformamide at 120°C. On the other hand, II underwent both ring-opening polymerization and vinyl polymerization under the same conditions of the polymerization of I . The differences of polymerization behavior between I and II were also discussed.     

Metallo esters. VII. Stabilizing effect of sodium tert-butoxide on the growth center in the anionic polymerization of methacrylic esters

The growth center in the anionic polymerization of methacrylic esters is stabilized with alkaline alkoxides, sodium tert-butoxide in particular. The lifetime of the growth center was investigated in the polymerization of methyl methacrylate by evaluating yield and molecular weight distribution of the polymer formed when the monomer was added in two doses. The average lifetime of the original growth center stabilized by sodium tert-butoxide at 20°C under the given conditions was longer than several minutes. The stabilization of the growth center was also used in the stepwise copolymerization of n-butyl methacrylate and methyl methacrylate. The copolymer thus obtained in high yield was characterized as a block copolymer on the basis of its solubility, nuclear magnetic resonance (NMR) spectra, and measurements of the complex shear modulus.     

Polymerization of N-(2,3,4,5,6-pentafluorophenyl)-maleimide

A novel fluorine-containing polymer, poly[N-(2,3,4,5,6-pentafluorophenyl)maleimide], was prepared by the anionic polymerization of N-(2,3,4,5,6-pentafluorophenyl)maleimide (PFPMI). Anionic polymerization with alkali metal tert-butoxides gave poly(PFPMI) in 14–32% yield. Phenyllithium and sec-butyllithium also afforded poly(PFPMI). No polymer was obtained with a radical initiator such as 2,2′-azoisobutyronitrile. The polymerization took place only via the vinylene group of PFPMI and no appreciable side-reaction occurred. The obtained poly(PFPMI) shows unimodal molecular weight distribution and begins to decompose at 325°C.     

Anionic polymerization of vinyl monomers with xanthates

The polymerization of vinyl monomers with various xanthates (potassium tert-butylxanthate, potassium benzylxanthate, zinc n-butylxanthate, etc.) were carried out at 0°C in dimethylformamide. N-Phenylmaleimide, acrylonitrile, methyl vinyl ketone, and methyl methacrylate were found to undergo polymerization with potassium tert-butylxanthate; however, styrene, methyl acrylate, and acrylamide were not polymerized with this xanthate. In the anionic polymerization of methyl vinyl ketone with potassium tert-butylxanthate, the rate of the polymerization was found to be proportional to the catalyst concentration and to the square of the monomer concentration. The activation energy of methyl vinyl ketone polymerization was 2.9 kcal/mole. In the polymerization, the order of monomer reactivity was as follows: N-phenylmaleimide > methyl vinyl ketone > acrylonitrile > methyl methacrylate. The initiation ability of xanthates increased with increasing basicity of the alkoxide group and with decreasing electronegativity of the metal ion in the series, lithium, sodium, and potassium tert-butylxanthate. The relative effects of the aprotic polar solvents on the reactivity of potassium tert-butylxanthate was also determined as follows: diethylene glycol dimethyl ether > dimethylsulfoxide > hexamethylphosphoramide > dimethylformamide > tetrahydrofuran (for methyl vinyl ketone); dimethyl sulfoxide > hexamethylphosphoramide > dimethylformamide ? diethylene glycol dimethyl ether (for acrylonitrile).     

Kinetics of the Copolymerization of Methyl Vinyl Ketone and Acrylamide Initiated by the Adduct of Methyl Vinyl Ketone and Imidazole

N-(Butyl-3-one)imidazole acts as an initiating adduct which is formed in the anionic polymerization of methyl vinyl ketone (MVK) induced by imidazole (Im) and is directly formed from Im and the MVK monomer. The kinetics of the anionic homopolymerization of MVK and acrylamide (AAm) under argon in the presence of the adduct were investigated in tetrahydrofuran (THF). The rate of polymerization for the MVK system is expressed as R_p = k[Adduct] [MVK], where k = 3.1 × 10^?6 L/(mol·s)in THF at 30°C. The overall activation energy, E_a , was found to be 5.34 kcal/mol. The R_p for the AAm system is expressed as R_p = k[Adduct] [AAm], where k = 6.8 × 10^?6 L/(mol·s) in THF at 30°C, with E_a 7.78 kcal/mol. The mechanism of the polymerization induced by the initiator adduct is discussed on the basis of these results.     

Kinetic study of the radical polymerization behavior of N‐(1‐phenylethylaminocarbonyl)methacrylamide

Polymerization of N‐(1‐phenylethylaminocarbonyl)methacrylamide (PEACMA) with dimethyl 2,2′‐azobisisobutyrate (MAIB) was kinetically studied in dimethyl sulfoxide (DMSO). The overall activation energy of the polymerization was estimated to be 84 kJ/mol. The initial polymerization rate (R_p) is given by R_p = k[MAIB]^0.6[PEACMA]^0.9 at 60 °C, being similar to that of the conventional radical polymerization. The polymerization system involved electron spin resonance (ESR) spectroscopically observable propagating poly(PEACMA) radical under the actual polymerization conditions. ESR‐determined rate constants of propagation and termination were 140 L/mol s and 3.4 × 10⁴ L/mol s at 60 °C, respectively. The addition of LiCl accelerated the polymerization in N,N‐dimethylformamide but did not in DMSO. The copolymerization of PEACMA(M₁) and styrene(M₂) with MAIB in DMSO at 60 °C gave the following copolymerization parameters; r₁ = 0.20, r₂ = 0.51, Q₁ = 0.59, and e₁ = +0.70. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2013–2020, 2005     

Vinyl polymerization with a binary system of p‐chlorobenzenediazonium salt and sodium tetraphenylborate

A combined system of sodium tetraphenylborate (STPB) and p‐chlorobenzenediazonium tetrafluoroborate (CDF) serves as an effective initiator at low temperatures for acrylate monomers such as methyl methacrylate (MMA), ethyl acrylate, and di‐2‐ethylhexyl itaconate. The polymerization of MMA with the STPB/CDF system has been kinetically investigated in acetone. The polymerization shows a low overall activation energy of 60.3 kJ/mol. The polymerization rate (R_p) at 40 °C is given by R_p = k[STPB/CDF]^0.5[MMA]^1.6, when the molar ratio of STPB to CDF is kept constant at unity, suggesting that STPB and CDF form a complex with a large stability constant and play an important role in initiation and that MMA participates in the initiation process. From the results of a spin trapping study, p‐chlorophenyl and phenyl radicals are presumed to be generated in the polymerization system. A plausible initiation mechanism is proposed on the basis of kinetic and electron spin resonance results. A large solvent effect on the polymerization can be observed. The largest R_p value in dimethyl sulfoxide is 11 times the smallest value in N,N‐dimethylformamide. The copolymerization of MMA and styrene with the STPB/CDF system gives results somewhat different from those of conventional radical copolymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4206–4213, 2001     

Polymerization of vinyl monomers with salts of bronsted acids

The polymerization of vinyl monomers (N-phenylmaleimide, acrylamide, acrylonitrile, methyl vinyl ketone, methyl methacrylate, vinyl chloride, and styrene) with sodium salts of Brønsted acids (sodium cyanide, sodium nitrite, sodium hydroxide, etc.) were investigated at 0°C in dimethylformamide. N-Phenylmaleimide, acrylonitrile, and methyl vinyl ketone were found to undergo polymerization with sodium cyanide, however the other monomers were not polymerized with this salt. In the polymerizations of acrylonitrile and N-phenylmaleimide with sodium cyanide, the rates of the polymerizations were found to be proportinal to the initiator concentration and to the square of the monomer concentration. The activation energy of acrylonitrile polymerization was 3.7 kcal/mole, and that of N-phenylmaleimide ws 3.0 kcal/mole. The results of the copolymerization of acrylonitrile with methyl methacrylate at 0°C in dimethyl-formamide with sodium cyanide confirm that these polymerizations proceeded by an anionic mechanism initiated by the Michael addition reaction of the monomers with the salts. In these polymerizations, the monomer reactivity increased with increase in the e values. The initiation ability of sodium salts increased with increasing pK_a of the conjugate acids and with decreasing electronegativity of metal ion in the series of lithium, sodium, and potassium cyanide. The polymerizations took place only in aprotic polar solvents, and did not occur in weak polar solvents and in protonic solvents.     

Anionic polymerization of acrylates. II. Polymerization of 2-ethylhexyl acrylate initiated by butyllithium/lithium-tert-butoxide system in tetrahydrofuran and its mixtures with toluene

The anionic polymerization of 2-ethylhexyl acrylate (EtHA) initiated with the complex butyllithium/lithium-tert-butoxide (BuLi/t-BuOLi) was investigated at ?60°C in a medium of various solvating power, i.e., in mixtures of toluene and tetrahydrofuran and in neat tetrahydrofuran. With increasing amount of THF in the mixture the attainable limiting conversion of polymerization decreases; the monomer can be polymerized quantitatively only in a toluene/THF mixture (9/1). Molecular weights of the polymers thus obtained, their distribution, and initiator efficiency are not appreciably affected by the polymerization medium. The molecular weight distribution of the products is medium-broad (M_w/M_n = 2–2.4), with a hint of bimodality. The ¹H-¹³C-NMR, and IR spectra suggest that during the polymerization there is neither any perceptible reesterification of the polymer with the alkoxide nor transmetalation of the monomer with the initiator. In a suitable medium, autotermination of propagation proceeds to a limited extent only, predominantly via intramolecular cyclization of propagating chains; in a medium with a higher content of polar THF, it prevails and terminates propagation before the polymerization of the monomer has been completed. © 1992 John Wiley & Sons, Inc.     

Synthesis and helical conformation of poly(N‐propargylamides) carrying L‐aspartic acid in the side chain

Aspartic acid‐based novel poly(N‐propargylamides), i.e., poly[N‐(α‐tert‐butoxycarbonyl)‐L ‐aspartic acid β‐benzyl ester N′‐propargylamide] [poly( 1 )] and poly[N‐(α‐tert‐butoxycarbonyl)‐L ‐aspartic acid α‐benzyl ester N′‐propargylamide] [poly( 2 )] with moderate molecular weights were synthesized by the polymerization of the corresponding monomers 1 and 2 catalyzed with (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃] in CHCl₃ at 30 °C for 2 h in high yields. The chiroptical studies revealed that poly( 1 ) took a helical structure in DMF, while poly( 2 ) did not in DMF but did in CH₂Cl₂, CHCl₃, and toluene. The helicity of poly( 1 ) and poly( 2 ) could be tuned by temperature and solvents. Poly( 2 ) underwent solvent‐driven switch of helical sense, accompanying the change of the tightness. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5168–5176, 2005     

Synthesis and polymerization of N‐(4‐tetrahydropyranyl‐oxyphenyl)maleimide

N‐(4‐Tetrahydropyranyl‐oxy‐phenyl)maleimide (THPMI) was prepared and polymerized by radical or anionic initiators. THPMI could be polymerized by 2,2′‐azobis(isobutyronitrile) (AIBN) and potassium tert‐butoxide. Radical polymers (poly(THPMI)r) were obtained in 15–50% yields for AIBN in THF at 65°C after 2–5 h. The yield of anionic polymers (poly(THPMI)a) obtained from potassium tert‐butoxide in THF at 0°C after 20 h was 91%. The molecular weights of poly(THPMI)r and poly(THPMI)a were M_n = 2750–3300 (M_w/M_n = 1.2–3.3) and M_n = 11300 (M_w/M_n = 6.0), respectively. The difference in molecular weights of the polymers was due to the differences in the termination mechanism of polymerization and the solubility of these polymers in THF. The thermal decomposition temperatures were 205 and 365°C. The first decomposition step was based on elimination of the tetrahydropyranyl group from the poly(THPMI). Positive image patterns were obtained by chemical amplification of positive photoresist composed of poly(THPMI) and 4‐morpholinophenyl diazonium trifluoromethanesulfonate used as an acid generator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 341–347, 1999     

Anionic polymerization of N-substituted maleimide. V. A study on the kinetic features of anionic polymerization of N-phenylmaleimide

The kinetic feature of the anionic polymerization of N-PMI was investigated in THF. The polymerization system initiated with lithium tert-butoxide was revealed to be so-called “slow-initiation” system. The rate constant of the initiation reaction, k_i, was obtained to be 4.2 × 10^?3 (L mol^?1 s^?1) at ?72°C. The apparent rate constants of the propagation reaction, k, at ?72°C were individually obtained from each slope of the first-order plots in the later stages of the polymerizations for four different initiator concentrations. Each k is fairly close to that of initiation rate around 10^?3. The propagation reaction was concluded to be dominated by ion-pair mechanism from the analysis of the kinetic data and the results of the addition effects of crown ether and common salt.     

Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Radical polymerization of 3-methylene-5,5′-dimethyl-2-pyrrolidinone: A cyclic analog of N-substituted methacrylamide

3-Methylene-5,5′-dimethyl-2-pyrrolidinone (α-MDMP), a cyclic analog of N-substituted methacrylamide, was synthesized and polymerized with α,α′-azobis (isobutyronitrile) (AIBN) in solution. Poly(α-MDMP) is only soluble in dimethyl sulfoxide (DMSO) at room temperature. Thermogravimetry of poly(α-MDMP) showed 10% weight loss at 355°C in air and 400°C under nitrogen, respectively. The kinetics of α-MDMP homopolymerization with AIBN was investigated in DMSO. The rate of polymerization (R_p) can be expressed by R_p = k[AIBN]^0.49[α-MDMP]^1.0 and the overall activation energy has been calculated to be 73.2 kJ/mol. Monomer reactivity ratios in copolymerization of α-MDMP (M₂) with methyl methacrylate (M₁) are r₁ = 0.71 and r₂ = 0.71, from which Q and e values of α-MDMP are calculated as 0.75 and -0.43, respectively. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of new soluble cardo polyesters derived from 1,1‐bis‐[4‐(4‐chlorocarboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane with various bisphenols by solution polycondensation

A new cardo diacid chloride, 1,1‐bis‐[4‐(4‐chlorocarboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane ( 4 ), was synthesized from 1,1‐bis‐[4‐(4‐carboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane in refluxing thionyl chloride. Subsequently, various new polyesters were prepared from 4 with various bisphenols by solution polycondensation in nitrobenzene using pyridine as a hydrogen chloride quencher at 150 °C. These polyesters were produced with inherent viscosities of 0.32–0.50 dL · g^?1. Most of these polyesters exhibited excellent solubility in a variety of solvents such as N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, o‐chlorophenol, and chloroform. These polymers showed glass‐transition temperatures (T_g's) between 144 and 197 °C. The polymer containing the adamantane group exhibited the highest T_g value. The 10% weight loss temperatures of the polyesters, measured by thermogravimetric analysis, were found to be in the range of 426–451 °C in nitrogen. These cardo polyesters exhibited higher T_g's and better solubility than bisphenol A‐based polyesters. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2951–2956, 2001     

Thermal polymerization of N-tert-butylacrylamide in 1,4-dioxane

The kinetics of the thermal polymerization of N-tert-butylacrylamide were investigated in 1,4-dioxane as solvent, in the 65–80°C temperature range. It was found that the overall rate of polymerization which was determined by a gravimetric method is proportional to the 1.9 power of monomer concentration at 70°C. The rate of initiation was determined by ESR spectroscopy using DPPH as an inhibitor, and it was found that the order of initiation rate is 1.8 with respect to monomer concentration at 70°C. The overall activation energy for the thermal polymerization of N-tert-butylacrylamide was found to be 64 ± 9 kJ mol^?1 in the 65–80°C temperature range. The activation energy for the rate of initiation was also determined and it was found to be 90 ± 23 kJ mol^-1.     

Preparation and properties of novel benzoxazine and polybenzoxazine with maleimide groups

A benzoxazine compound with a maleimide group, 3‐phenyl‐3,4‐dihydro‐2H‐6‐(N‐maleimido)‐1,3‐benzoxazine (HPM‐Ba), was prepared from N‐(4‐hydroxyphenyl)maleimide, formaldehyde, and aniline. The chemical structure of HBM‐Ba was identified by FT‐IR, ¹H‐NMR, and elemental analysis. HPM‐Ba showed a melting point of 52–55 °C and good solubility in common organic solvents. HPM‐Ba showed a two‐stage process of thermal polymerization. The first stage arose from the polymerization of maleimide groups, and the second one was the ring‐opening reaction of benzoxazine groups. Fusible polymaleimides with a Tg of around 100 °C could be obtained by thermally polymerizing HPM‐Ba at 130 °C. Further polymerizing the polymaleimides at 240 °C resulted in a completely cured resin showing a Tg at 204 °C. Good thermal stability and self‐extinguishing behavior was observed with the cured polybenzoxazine resins. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5954–5963, 2004     

Synthesis and characterization of new soluble polyesters derived from various cardo bisphenols by solution polycondensation

A series of new polyesters was prepared from terephthaloyl (or isophthaloyl) chloride acid with various cardo bisphenols on solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher at 150 °C. These polyesters were produced with inherent viscosities of 0.32–0.49 dL · g⁻¹. Most of these polyesters exhibited excellent solubility in a variety of solvents such as N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, and o‐chlorophenol. The polyesters containing cardo groups including diphenylmethylene, tricyclo[5.2.1.0^2,6]decyl, tert‐butylcyclohexyl, phenylcyclohexyl, and cyclododecyl groups exhibited better solubility than bisphenol A–based polyesters. These polymers showed glass transition temperatures (T_g's) between 185 °C and 243 °C and decomposition temperatures at 10% weight loss ranging from 406 °C to 472 °C in nitrogen. These cardo polyesters exhibited higher T_g's and better solubility than bisphenol A‐based polyesters. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4451–4456, 2000     

THERMAL BEHAVIOR AND IONIC CONDUCTIVITY OF POLY[LITHIUM-N(4-SULFO-PHENYL) MALEIMIDE -CO-METHOXY OLIGO(OXYETHYLENE) METHACRYLATE]

Poly[lithium-N(4-sulfophenyl) maleimide -co- methoxy oligo-(oxyethylene) methacrylates] [P(LiSMOE_n)s] with three different oligoether side chains and different salt concentrations were synthesized. The copolyelectrolytes are essentially random in structure, with blocks of methoxy oligo(oxyethylene) meth-acrylate (MOE_nM) recurring sporadically in between the salt units of N(4-sulfophenyl) maleimide. They all show two glass transitions in the temperature range of ?100 to 100°C. The first one below ?30°C is assigned to the oligo(oxyethylene) side chain (T _g1), while the second one located between 20 and 50°C is attributed to the main chain of the polymer host (T _g2). The maximum ionic conductivity of the copolymer electrolytes, 1.6 × 10^?7 S cm^?1 at 25°C, occurs at lithium salt concentration [Li⁺]/[EO] = 2.2 mol%. The ionic conductive behavior of the copolyelectrolytes follows the Vogel-Tammann-Fulcher (VTF) equation. Moreover, a special VTF behavior exists in the copolymers with shorter oligoether side chain and higher salt concentration. Sweep voltammetric results indicate that these copolyelectrolytes have a good electrochemical stability window.     

Effect of tetraalkylammonium salts on the tacticity of poly(methyl methacrylate), 2.. Initiation by potassium tert-butoxide

The anionic polymerization of methyl methacrylate was carried out in the presence of potassium tert-butoxide (t-BuOK)/quaternary ammonium salts (QAS) in toluene and tetrahydrofuran at −60°C. It was found that in toluene some QAS additives substantially increase the syndiotacticity of poly(methyl methacrylate). Two types of QAS were distinguished, quite different in their action. The addition of QAS with one or two longchain alkyl groups (>C₁₂), does not change significantly the mode of the monomer addition, whereas the polymerization in the presence of tetraalkylammonium salts with four equal substituents and dimethyldidodecylammonium bromide yields predominantly a syndiotactic polymer with high conversion and comparatively low polydispersity (M̄_w/M̄_w = 1.3−1.5). In some cases QAS additives are more effective modifiers than cryptand [2.2.2].