A biosensor prepared by co-entrapment of a glucose oxidase and a carbon nanotube within an electrochemically deposited redox polymer multilayer

A glucose biosensor based on a nanocomposite made by layer-by-layer electrodeposition of the redox polymer into a multilayer containing glucose oxidase (GOx) and single-walled carbon nanotubes (SWCNT) on a screen-printed carbon electrode (SPCE) surface was developed. The objectives of the electrodeposition of redox polymer are to stabilize further the multilayer using a coordinative cross-linked redox polymer and to wire the GOx. The electrochemistry of the layer-by-layer assembly of the GOx/SWCNT/redox polymer nanocomposite was followed by cyclic voltammetry. The resultant biosensor provided stable and reproducible electrocatalytic responses to glucose, and the electrocatalytic current for glucose oxidation was enhanced with an increase in the number of layers. The biosensor displayed a linear range from 0.5 to 6.0mM, a sensitivity of 16.4μA/(mMcm(2)), and a response time of about 5s. It shows no response to 0.05mM of ascorbic acid, 0.32mM of uric acid and 0.20mM of acetaminophen using a Nafion membrane covering the nanocomposite-modified electrode surface.     

Electrochemical characterization of polyelectrolyte/gold nanoparticle multilayers self-assembled on gold electrodes

Polyelectrolyte/gold nanoparticle multilayers composed of poly(l-lysine) (pLys) and mercaptosuccinic acid (MSA) stabilized gold nanoparticles (Au NPs) were built up using the electrostatic layer-by-layer self-assembly technique upon a gold electrode modified with a first layer of MSA. The assemblies were characterized using UV-vis absorption spectroscopy, cyclic and square-wave voltammetry, electrochemical impedance spectroscopy, and atomic force microscopy. Charge transport through the multilayer was studied experimentally as well as theoretically by using two different redox pairs [Fe(CN)(6)](3-/4-) and [Ru(NH(3))(6)](3+/2+). This paper reports a large sensitivity to the charge of the outermost layer for the permeability of these assemblies to the probe ions. With the former redox pair, dramatic changes in the impedance response were obtained for thin multilayers each time a new layer was deposited. In the latter case, the multilayer behaves as a conductor exhibiting a strikingly lower impedance response, the electric current being enhanced as more layers are added for Au NP terminated multilayers. These results are interpreted quite satisfactorily by means of a capillary membrane model that encompasses the wide variety of behaviors observed. It is concluded that nonlinear slow diffusion through defects (pinholes) in the multilayer is the governing mechanism for the [Fe(CN)(6)](3-/4-) species, whereas electron transfer through the Au NPs is the dominant mechanism in the case of the [Ru(NH(3))(6)](3+/2+) pair.     

Layer-by-layer synthesis of multilayer core-shell latex and the film formation properties

Polymer latex particles were synthesized with multilayer core-shell structure via surface cross-linking emulsion polymerization. The latex core is coated with a five-layer shell. The polymerization was done in a semicontinuous fashion monitored by a dynamic laser scattering (DLS). The copolymer in each layer is designed with alternating high and low glass transition temperature (T(g)). Divinylbenzene (DVB) was added as the cross-linking agent in the synthesis of the "hard" layers to prevent the molecular diffusion from the adjacent "soft" layers. The layer-by-layer increment on the latex core is proved by the alternating changes on the film-formation capabilities of different latex emulsions at room temperature in correspondence with the variance in the T(g) of the outermost polymer layer. The detailed morphologies of the films formed by the latex with different number of layers were characterized by atom force microscopy (AFM). The deformation of the latex particles is largely depended on the nature of the polymer in the outermost layer of the latex particles. Further characterization carried out by multifrequency temperature-modulated differential scanning calorimetry (TOPEM-DSC) confirmed the layer-by-layer structure of the particles, although the molecular redistribution and the interlayer structures were observed. The work provides a routine toward the synthesis of multilayer polymer latexes.     

Synthesis, characterization and immobilization of Prussian blue nanoparticles. A potential tool for biosensing devices

Prussian blue (PB) particles with the size of ca. 5 nm were synthesized and immobilized in a multilayer structure, as a strategy for the potential development of an amperometric transducer for oxidase-enzyme-based biosensors. Multilayer films composed of PB and poly(allylamine hydrochloride) (PAH) were prepared via layer-by-layer (LbL) sequential deposition. The process was carefully monitored by UV-vis spectroscopy and cyclic voltammetry. The increase of the redox current peaks during the layer-by-layer deposition demonstrated that charge propagation within the film occurs. Linear increase of UV-vis absorbance with the number of deposited bilayers indicates that well-organized systems have been elaborated. ITO electrodes coated with PB/PAH films were used successfully for detecting H2O2, sensitivity being dependent on the number of PB/PAH layers.     

Multilayer assembly and patterning of poly(p-phenylenevinylene)s via covalent coupling reactions

Poly(p-phenylenevinylene)s with amines and pentafluorophenyl esters on side chains were synthesized and assembled on solid substrates by sequential layer-by-layer (LBL) deposition. This approach enables the creation of robust multilayer thin films via in-situ covalent coupling reactions between successive layers. The buildup of the multilayers was followed by UV/vis absorption spectroscopy and ellipsometry. The observed complex assembly behavior suggests that both covalent and hydrogen-bonding interactions are involved in the formation of multilayer films. The organized structure and surface morphology of resultant multilayers were investigated by reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. This covalent LBL method was further applied to generate conjugated polymer micropatterns using microstamped self-assembled monolayers as templates.     

Dynamics of counterions in polyelectrolyte multilayers studied by electro-optics

The electro-optical behavior of a multilayer constructed via layer-by-layer deposition of poly(sodium 4-styrenesulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) onto ellipsoidal β-FeOOH particles is examined using electric light scattering method. For fully charged polymers (at pH 4.5), the electro-optical effect is found to increase with polyelectrolyte layer number, showing a tendency to saturation in the linear growth regime. The effect is greater and of lower frequency of relaxation for the films ending with PAH in comparison to those with top PSS layer. Evidence is given that polarization of “condensed” counterions along the chains of the last-adsorbed polymer is mainly responsible for the observed electro-optical behavior of the polyelectrolyte multilayer. Although incorporation of “condensed” small ions into the film bulk seems probable for the PSS/PAH multilayer, their participation in the electro-optical effect is found negligible. The structural changes in the PSS/PAH multilayer due to the PAH deprotonation at pH 7.5 and the corresponding changes in the electro-optical effect confirm the key role of the last-adsorbed polymer for the behavior of the entire PSS/PAH film.     

Electrochemical behavior of Au colloidal electrode through layer-by-layer self-assembly

Electrodes formed by Au colloidal nanoparticles have been obtained by layer-by-layer self-assembly using 1,6-hexanedithiol as cross-linkers. Cyclic voltammograms show that the peak-to-peak separation decreases as the number of Au colloidal layers increases. After seven layers of Au colloidal particles have been deposited, the multilayer electrodes have the electrochemical properties of metallic Au and show ideal microelectrode behavior. An equivalent circuit for the electrochemical impedance spectroscopy was established to model the working electrode. It is evident that by increasing the layer number of Au colloidals, the interfacial electron transfer is promoted, implying the electron-transfer process changes from a kinetically limited process to a diffusionally limited process.     

Pushing the size limits in the replication of nanopores in anodized aluminum oxide via the layer-by-layer deposition of polyelectrolytes

We report on the successful replication of the smallest pores in anodized aluminum oxide (AAO) via the layer-by-layer (LBL) deposition of polyelectrolytes to date to yield free-standing, open nanotubes with inner and outer diameters (±2σ) down to 37 ± 4 and 52 ± 19 nm, respectively. This work is based on the fabrication of defined arrays of highly regular nanopores by anodic oxidation of aluminum. Pores with pore diameters between 53 ± 9 and 356 ± 14 nm and interpore distances between 110 ± 3 and 500 ± 17 nm were obtained using an optimized two-step anodization procedure. 3-(Ethoxydimethylsilyl)propylamine-coated pores were replicated by alternating LBL deposition of poly(styrenesulfonate) and poly(allylamine). The detrimental adsorption of polyelectrolyte on the top surface of the template that typically results in partial pore blocking was eliminated by controlling the surface energy of the top surface via deposition of an ultrathin gold layer. The thickness of the deposited LBL multilayer assembly at the pore orifice agreed to within the experimental error with the thicknesses measured by variable angle spectroscopic ellipsometry and atomic force microscopy (AFM) for layers assembled on flat substrates. The selective dissolution of the alumina template afforded free-standing, open polymer nanotubes that were stable without any cross-linking procedure. The nanotubes thus obtained possessed mean outer diameters as small as 52 nm, limited by the size of the AAO template.     

The electroactive multilayer films of polyelectrolytes and Prussian blue nanoparticles and their application for H2O2 sensors

Prussian blue (PB) nanoparticles were immobilized in polyelectrolyte (PE) multilayers of various compositions and thickness. Films containing nanoparticles and poly(allylamine hydrochloride) (PAH) were formed using the layer-by-layer adsorption method. A layer of branched poly(ethyleneimine) (PEI) was used to anchor the multilayer structure at the surface of a gold electrode. The films exhibited electroactive properties, increasing with the number of deposited PB layers. The properties of PEI/(PB/PAH) _n multilayers were then compared with the ones containing additionally the conductive polymer poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) (PEDOT:PSS). We found that the addition of the conductive, water-soluble polymer enhances the electroactive properties of the multilayer films. It also increased sensitivity of the multilayer-covered electrodes for electrochemical detection of hydrogen peroxide.     

Self-assembly of S-layer-enveloped cytochrome c polyelectrolyte multilayers

We report a study of the electrostatic layer-by-layer self-assembly of electroactive polyelectrolyte multilayers incorporating the redox protein cytochrome c (cyt c) combined with recrystallization of the bacterial cell wall surface layer from Bacillus sphaericus CCM 2177 SbpA (S-layer). The polyelectrolyte multilayer assembly was prepared on flat gold electrodes with a nanometer-scale roughness that allowed monitoring of the film formation throughout all the assembly stages by atomic force microscopy measurements in liquid with respect to topography and forces. The deposition of alternating layers of sulfonated polyaniline and cyt c was carried out by adsorption from the corresponding solutions on a cyt c monolayer electrode. The electroactivity of cyt c within the assembly was confirmed by cyclic voltammetry. We showed that the surface properties of the electrode terminating layer change after each adsorption step accordingly. We also found that S-layer recrystallization on the top of the multilayer film was feasible while electroactivity of cyt c within a polyelectrolyte matrix was partially maintained. This approach offers a new strategy to design a biocompatible and permselective outer envelope of a polyelectrolyte multilayer, promising sensor applications.     

Electrochemical Quartz Crystal Microbalance Studies on Cytochrome c/Polyelectrolyte Multilayer Assemblies on Gold Electrodes

Polyelectrolyte multilayer assemblies containing proteins are of interest for applications such as sensors, bioreactors, and bioelectronics. A multilayer electrode was built up by the layer‐by‐layer strategy consisting of alternating layers of cytochrome c and poly(aniline sulfonic acid). The electrode showed a linear increase of redox active protein with the number of deposited layers. The principle of electrode preparation was transferred from needle electrodes to planar surfaces in order to further the understanding of electron transfer through the layer assembly by means of electrochemical quartz crystal microbalance studies. The deposition process was followed on‐line by detection of the frequency shift of the crystals and was found to be rather fast (minutes). The total mass deposited was found to correlate well with the electrochemical response of the immobilized cyt.c. Furthermore, the influence of the polyelectrolyte was investigated by addition of PSS to the PASA solution. The strong interaction of the former polyelectrolyte seemed to hinder the electron transfer although a multilayer formation was proved. Dilution of the protein solution with redox inactive apo‐cyt.c led to a strong decrease of the voltammetric signal, well beyond the percentage of apo‐cyt.c inside the assembly. Thus, arguments for an electron transfer via protein–protein interaction were found.     

Self‐Assembly of Gold Nanoparticles/Electroactive Polyelectrolyte Multilayer Films for Tunable Electrocatalysis

This study described fabrication, characterization, and application of multilayer films based on layer‐by‐layer assembly of ferrocene poly(ethylenimine) and gold nanoparticles. Assembly process of the multilayer film was investigated by atomic force microscopy, UV‐visible absorption spectroscopy and electrochemical impedance spectroscopy. The multilayer films exhibited a pair of well‐defined redox peaks as revealed by cyclic voltammetry, as well as bifunctional and fine‐tunable electrocatalysis for oxidation of ascorbic acid and reduction of oxygen. Both the outer layer and layer number had effect on the electrocatalytic response. Electrocatalytic activity of the films could be controlled with assemblies at the nanoscale level by simply adjusting deposition cycles or amount of component in the films.     

基于层-层自反应的葡萄糖氧化酶有序多层膜电极

以胱胺修饰的金电极为基础电极, 利用席夫碱反应使经高碘酸根氧化的葡萄糖氧化酶在该电极表面进行自身的层-层有序组装. 用电化学交流阻抗法对多层酶膜形成过程的跟踪结果表明, 该多层酶膜的生长是一个逐步形成的均匀过程. 用循环伏安法和I-t曲线法研究了该酶电极对葡萄糖的电催化氧化. 实验结果表明, 当采用羟基二茂铁作为人工电子转移媒介体时, 该酶电极对葡萄糖具有很好的电催化氧化功能. 该传感器制作简便, 响应迅速, 性能稳定, 催化电流与葡萄糖浓度在一定范围内成正比, 并且可以通过控制葡萄糖氧化酶的组装层数来调节该生物传感器的灵敏度与检测限.     

Novel formulations of vitamins and insulin by nanoengineering of polyelectrolyte multilayers around microcrystals

Microcapsules loaded with vitamin K3 (VK3), biotin, or insulin were prepared by using a novel coating technology based on the layer-by-layer (LbL) deposition of oppositely charged polyelectrolytes onto microcrystal templates. This produced multilayered, polymeric shells of varying thickness around the crystalline cores. Dissolution of the core material (VK3 with ethanol, biotin with basic solution, and insulin with acidic solution), resulted in its release through the shells. Microelectrophoresis was employed to monitor the microcrystal coating process; confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM) were used to verify multilayer coating and the formation of hollow polymer shells following removal of the microcrystal templates. The release rates of both VK3 and insulin decreased as the wall thickness (the number of polyelectrolyte layers deposited onto the microcrystal cores), increased. The release time could be varied by a factor of more than ten, depending on the number of polyelectrolyte layers applied. Following the addition of 70 mass % ethanol, the solubility of VK3 increased by as much as 170-fold, resulting in an increased rate of VK3 release. By selecting appropriate polymer materials for the shells, and by controlling the number of polyelectrolyte layers applied, shells of various thickness, stiffness, aqueous solubility, dispersibility, biocompatibility, and permeability can be constructed.     

Two modes of linear layer-by-layer growth of nanoparticle--polylectrolyte multilayers and different interactions in the layer-by-layer deposition.

The structure of the multilayer assemblies of yttrium iron garnet nanoparticles (YIG) with polyelectrolytes was investigated with the emphasis on the control of the particle density in the adsorption layers. It was found that the growth of YIG films prepared by the layer-by-layer assembly can occur via two deposition modes: (1) sequential adsorption of densely packed adsorption layers (normal growth mode) and (2) in-plane growth of isolated particle domains (lateral expansion mode). Importantly, the dependence of the optical density on the number of deposition cycles remains linear in both cases. Microscopy results indicate that the origin of the lateral growth is in the interplay of particle/particle and particle/polyelectrolyte interactions rather than in a substrate effect. The lateral expansion mode is a general attribute of the layer-by-layer deposition and can be observed for various aqueous colloids. For the preparation of sophisticated multifunctional assemblies on nanoparticles, the film growth via domain expansion should be avoided, and therefore, one must be able to control the growth pattern. The switch from lateral to normal growth mode can be effected by grafting charged organic groups to YIG nanoparticles. Hydrophobic interactions between the hydrocarbon groups of the modified YIG and polyelectrolyte significantly increase the attractive component of the particle/polyelectrolyte and particle/particle interactions. The films from modified YIG display densely packed nanoparticle layers with a greatly reduced number of defects.     

Amperometric uric acid sensors based on polyelectrolyte multilayer films

Uricase (UOx) and polyelectrolyte were used for preparation of a permselective multilayer film and enzyme multilayer films on a platinum (Pt) electrode, allowing the detection of uric acid amperometrically. The polyelectrolyte multilayer (PEM) film composed of poly(allylamine) (PAA) and poly(vinyl sulfate) (PVS) were prepared via layer-by-layer assembly on the electrode, functioning as H₂O₂-selective film. After deposition of the permselective film (PAA/PVS)₂PAA, UOx and PAA were deposited via layer-by-layer sequential deposition up to 10 UOx layers to prepare amperometric sensors for uric acid. Current response to uric acid was recorded at +0.6 V vs. Ag/AgCl to detect H₂O₂ produced from the enzyme reaction. The response current increased with increasing the number of UOx layers. Even in the presence of ascorbic acid, uric acid can be detected over the concentration range 10⁻⁶-10⁻³ M. The response current and deposited amount of UOx were affected by deposition bath pH and the addition of salt. The deposition of PAA/UOx film prepared in 2 mg ml⁻¹ solution (pH 11) of PAA with NaCl (8 mg ml⁻¹) and 0.1 mg ml⁻¹ solution (pH 8.5) of UOx with borate (100 mM) resulted in an electrode which shows the largest response to uric acid. The response of the sensor to uric acid was decreased by 40% from the original activity after 30 days.     

Layer-by-Layer Construction of Novel Biofunctional Fluorescent Microparticles for Immunoassay Applications

A novel class of biofunctional fluorescent microparticles for application in immunoassays was constructed by using the layer-by-layer self-assembly method to deposit multiple layers of fluorescently labeled polyelectrolytes onto colloidal particles, followed by deposition of a protein (immunoglobulin G, IgG) layer. Microelectrophoresis experiments revealed alternating negative and positive zeta-potentials with deposition of each successive polyelectrolyte layer, indicating that the alternate electrostatic adsorption of polyelectrolytes of opposite charge was successfully achieved. Transmission electron microscopy images showed a change of the particle surface texture after polyelectrolyte multilayer deposition. Fluorescence microscopy image (FMI) analysis provided direct measurement of the fluorescence intensity of single microparticles. The observed systematic increase of the fluorescence intensity of individual microparticles with increasing polyelectrolyte layer number from FMI analysis further demonstrated the controlled regular adsorption of polyelectrolyte layers onto the polystyrene (PS) particles. Protein immobilization onto the polyelectrolyte multilayer-coated particles was verified by the different surface properties of the microparticles with respect to surface charge under pH conditions above and below the isoelectric point of the proteins. The assembly of IgG and fluorescein isothiocyanate-labeled IgG onto polyelectrolyte multilayer-coated PS microparticles and their potential use was ultimately confirmed by a solid phase immunotest. Copyright 2001 Academic Press.     

Photocatalytic properties of titania nanostructured films fabricated from Titania nanosheets

We examined the photochemical properties of well-ordered multilayer films of titania nanosheets prepared on quartz-glass substrate using the layer-by-layer deposition method. The photocatalytic decomposition of gaseous 2-propanol and bleaching of Methylene Blue dye under UV light illumination were measured to evaluate the photocatalytic oxidation ability. Photoinduced hydrophilicity was also studied by measuring the contact angle of water droplets on the film. The results indicated that titania nanosheets had good photoinduced hydrophilicity. The monolayer film of titania nanosheets showed almost identical activity compared with well investigated sol-gel derived anatase TiO(2) film, while its photocatalytic oxidation activity was low by more than an order of magnitude. This fact suggests that photoinduced hydrophilicity could not be explained simply in terms of the photocatalytic removal of hydrophobic organic species adsorbed on the surface. The photocatalytic oxidation activity and the photoinduced hydrophilic conversion rate decreased with increasing number of nanosheet layers, suggesting that photogenerated carriers produced in the internal part of the multilayer films can hardly diffuse to the surface layer. Photochemical properties of ultrathin anatase films obtained simply by heating the titania nanosheet films were evaluated as well, and also revealed high photoinduced hydrophilicity.     

Modeling the growth processes of polyelectrolyte multilayers using a quartz crystal resonator

The layer-by-layer buildup of chitosan/hyaluronan (CH/HA) and poly(l-lysine)/hyaluronan (PLL/HA) multilayers was followed on a quartz crystal resonator (QCR) in different ionic strengths and at different temperatures. These polyelectrolytes were chosen to demonstrate the method whereby useful information is retrieved from acoustically thick polymer layers during their buildup. Surface acoustic impedance recorded in these measurements gives a single or double spiral when plotted in the complex plane. The shape of this spiral depends on the viscoelasticity of the layer material and regularity of the growth process. The polymer layer is assumed to consist of one or two zones. A mathematical model was devised to represent the separation of the layer to two zones with different viscoelastic properties. Viscoelastic quantities of the layer material and the mode and parameters of the growth process were acquired by fitting a spiral to the experimental data. In all the cases the growth process was mainly exponential as a function of deposition cycles, the growth exponent being between 0.250 and 0.275.     

Layer-by-layer-assembled multilayer films of polyelectrolyte-stabilized surfactant micelles for the incorporation of noncharged organic dyes

Noncharged pyrene molecules were incorporated into multilayer films by first loading pyrene into poly(acrylic acid) (PAA)-stabilized cetyltrimethylammonium bromide (CTAB) micelles (noted as PAA&(Py@CTAB)) and then layer-by-layer (LbL) assembled with poly(diallyldimethylammonium chloride) (PDDA). The stable incorporation of pyrene into multilayer films was confirmed by quartz crystal microbalance (QCM) measurements and UV-vis absorption spectroscopy. The resultant PAA&(Py@CTAB)/PDDA multilayer films show an exponential growth behavior because of the increased surface roughness with increasing number of film deposition cycles. The present study will open a general and cost-effective avenue for the incorporation of noncharged species, such as organic molecules, nanoparticles, and so forth, into LbL-assembled multilayer films by using polyelectrolyte-stabilized surfactant micelles as carriers.