在光腔中利用自然非均匀展宽的原子系综进行光量子态存储

在非对称的光腔中,我们提出了一个利用自然非均匀展宽的原子系综实现高效量子存储方案.在这个存储方案里我们使用了类似于传统光子回声技术中强π脉冲,而不是烧孔技术.这使得我们的方案可以在更多的材料体系中实现.在阻抗匹配的条件下,我们发现进入光腔的光脉冲可以完全被原子系综吸收.而且在光深度很小时,量子存储效率就可以达到1.     

基于二能级光量子态存储效率的研究

本文研究利用沉默再生效回声(ROSE)技术实现光量子态存储的效率。利用自然非均匀展宽的二能级原子系综,不需应用任何外部的电场或磁场进行调控。在均匀光谱分布下,我们对吸收过程和读取过程进行分析,得出量子的存储效率。发现对于光子向前读取过程,存储效率的最大值能达到54%;而当光深度达到无穷大时,向后的读取效率可达到100%。我们给出了详细的理论推导过程。     

光子回声量子存储器中非均匀展宽频谱对存储效率的影响

本文提出了一个利用光子回声技术探究非均匀展宽频谱线形(如高斯、洛伦兹分布)对存储效率影响的简捷方法。我们发现当信号光脉冲的持续时间与介质频谱线宽的乘积远大于1时,可将分布函数的傅里叶变换近似成狄拉克函数,使得研究非均匀展宽频谱对存储效率的影响变得非常容易;通过计算发现不同线形分布达到最佳存储效率的光学深度有所不同,频谱线形趋于均匀时达到最优存储效率的存储介质光学深度最小。该研究对实验上实现最优化光量子态存储具有指导意义。     

双腔光力学系统中输出光场纠缠特性的研究

腔光力学系统中的光辐射压力可以使系统中的各个子系统之间产生量子纠缠,最近在腔光力学系统中的量子纠缠引起了人们广泛的关注.本文研究了双腔光力系统中关于输出光场之间纠缠的性质,发现:此系统中力学振子的弛豫速率和滤波器带宽以及非相等耦合对输出光场之间纠缠的大小有着非常显著的影响,特别是在相等耦合条件下,输出光场中心频率与光腔本征频率近共振时,滤波器带宽对输出光场纠缠有着显著的抑制作用;但是如果采用非相等耦合,则可以有效抵制滤波器带宽对纠缠的抑制作用,使输出光场纠缠得到大幅提高.研究结果可应用在光力耦合系统中实现量子态转换、量子隐形传态等量子信息处理过程.     

高效外腔倍频产生426 nm激光的实验研究

利用与铯原子吸收线对应的852 nm半导体激光作为基频光,泵浦基于周期极化磷酸钛氧钾(PPKTP)晶体的环形腔,进行高效外腔谐振倍频并产生426 nm激光.在理论分析小角度环形腔内的热透镜效应基础上,发现晶体中等效热透镜中心位置并非在晶体的几何中心.在理论分析的基础上,实验上通过精密平移台精细调节PPKTP晶体在腔内位置,使得等效热透镜中心位置与谐振腔的腰斑位置重合,进而减小晶体热透镜效应导致的模式失配对倍频效率的影响.在泵浦功率为515 mW时产生了428 mW的426 nm激光输出,对应的倍频转换效率为83.1%.此高效倍频过程为制备与铯原子吸收线相匹配的非经典光场提供有效泵浦光,为推动量子非经典光场的应用以及量子信息科学的发展奠定基础.     

基于电磁诱导透明机制的压缩光场量子存储

光场的量子存储不仅是构建量子计算机的重要基础,而且是实现量子中继和远距离量子通信的核心部分.由于存在不可避免的光学损耗,光学参量放大器产生的压缩真空态光场将变为压缩热态光场,不再是最小不确定态.因此,压缩热态光场的量子存储是实现量子互联网的关键.在原子系综中利用电磁诱导透明机制能够实现量子态在光场正交分量和原子自旋波之间的相互映射,即受控量子存储.本文根据量子存储的保真度边界,研究了实现压缩热态光场量子存储的条件.量子存储的保真度边界是通过经典手段能够达到的最大保真度,当保真度大于该边界时,就实现了量子存储.通过数值计算分析了不同情况下压缩热态光场的量子存储保真度边界,以及存储保真度随存储效率的变化关系,得到了实现量子存储的条件,为连续变量量子存储实验设计提供了直接参考.     

基于EuCl_3·6H_2O晶体的光存储

量子存储器是构建未来大规模量子网络的核心器件.由于具有超长的量子相干寿命,稀土掺杂晶体逐渐成为最有希望实现实用量子存储的材料之一.然而掺杂晶体中不可避免的晶格畸变限制了该类材料的吸收深度和存储效率.纯稀土化合物晶体则同时满足了低晶格畸变和高稀土离子密度的需求,有望实现高光存储效率. EuCl_3·6H_2O晶体是目前研究较多的一种纯稀土化合物晶体,已经实现了低于超精细能级间距的光学非均匀展宽,并且理论预测的自旋相干寿命可达1000 s,是一种颇具潜力的量子存储材料.目前光存储或量子存储功能仅仅在稀土掺杂晶体中实现过,尚无实验报道纯稀土化合物晶体中的光存储现象.本文报告了在EuCl_3·6H_2O晶体中实现了原子频率梳型光存储.通过降温法生长得到了EuCl_3·6H_2O单晶,实验测得其~7F_0→~5D_0跃迁相干时间为55.7μs,存储时间1μs时的存储效率为1.71%,展现了这种材料实现光量子存储的原理可行性.通过分析温度依赖的吸收线频率移动,指出在这一材料中实现高效率光存储的主要挑战在于高效率的光谱烧孔.     

非临界压缩光场探测的实验方案研究

压缩态光场作为一种重要的量子光源,在量子计算、量子通信、精密测量等领域有广泛的应用前景.在非临界压缩光场产生的理论预测中,阈值以上泵浦的简并光学参量振荡器(DOPO)产生横向空间分布为一阶厄米高斯模式的非临界压缩光场,具有对泵浦光功率波动鲁棒性的量子特性,因此在实验中具有重要的应用价值.然而该非临界压缩光场的横向幅角随机旋转,导致无法利用本底探针光对其压缩特性进行稳定的平衡零拍实验探测.本文提出利用DOPO同时产生的与压缩光场空间正交的明亮光场作为本底探针光的实验探测方案.理论分析表明,该方案虽然引入了真空噪声,但可以很好地抵消压缩光场空间模式随机旋转引入的探测输出动态波动,得到3 d B的稳定探测结果,且对本底探针光的相位波动具有鲁棒性.因此该探测方案对于非临界压缩光场的实验研究具有重要的实用价值.     

利用光子回声技术对光的相干态进行存储的研究

具备有效存储和读取光的相干态的能力是实现连续变量量子信息存储的关键。本文研究了利用混合光子回声技术对光场的相干态进行存储和读取。光量子态被记录在原子系综的基态的两个相干能级中从而实现长时间的量子态存储。考虑到由于原子退相干的噪声效应,我们发现在目前可实现的技术条件下存储保真度仍然高于保真度阈值2/3。我们的研究为实现高效准确的基于量子回声技术的光量子态存储提供了一些切实可行的实践指导。     

多个量子节点确定性纠缠的建立

量子纠缠是一种重要的量子资源,在多个空间分离的量子存储器间建立确定性的量子纠缠,然后在用户控制的时刻将所存储的量子纠缠转移到量子信道中进行信息的分发和传送,这对于实现量子信息网络是至关重要的.本文介绍了用光学参量放大器制备与铷原子D1吸收线对应的非经典光场,而且在三个空间分离的原子系综中确定性量子纠缠的产生、存储和转移.利用电磁感应透明光和原子相互作用的原理,将制备的多组分光场纠缠态模式映射到三个远距离的原子系综以建立原子自旋波之间的纠缠.然后,存储在原子系综中的纠缠态通过三个量子通道,纠缠态的量子噪声被转移到三束空间分离的正交纠缠光场.三束释放的光场间纠缠的存在验证了该系统具有保持多组分纠缠的能力.这个方案实现了三个量子节点间的纠缠,并且可以直接扩展到具有更多节点的量子网络,为未来实现大型量子网络通信奠定了基础.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.