ENZYMATICALLY SYNTHESIZED POLYANILINE IN THE PRESENCE OF A TEMPLATE POLY(VINYLPHOSPHONIC ACID): A SOLID STATE NMR STUDY

Template guided enzymatic synthesis of conducting polyaniline (PANI) is a one-step reaction and more importantly, it is an environmentally friendly process. Understanding of the reaction and coupling mechanism at the molecular level is of paramount significance to improve its processability and conductivity. Solid-state NMR techniques are useful to investigate molecular structures of enzymatically synthesized polyaniline (PANI). The PANI sample in three different forms i.e., (a) as-synthesized, self-doped conducting form; (b) dedoped, base form and; (c) redoped, conducting form, are investigated by solid-state ¹³C and ¹⁵N CP/MAS NMR techniques. Solid-state NMR data analysis shows that the structural features of enzymatically synthesized PANI are similar to that of chemically synthesized PANI. The solid-state ¹³C CP/MAS NMR spectrum of the base form of PANI confirmed that benzenoid-quinoid repeating units are present in the backbone of the PANI polymer chain. The poly(vinylphosphonic acid) (PVP) template provides charge compensation during the chain growth of linear polyaniline. After the completion of template-guided synthesis of PANI, it is now possible that the PVP template can be completely removed from the complex by dedoping with aqueous NH₄OH. The detached PANI from the PANI-PVP complex can then be redoped to conducting form without the presence of the template. The conductivity of the PANI and PANI-PVP complex are of the same order of magnitude. The solid-state ¹⁵N CP/MAS NMR chemical shifts are sensitive to charge distribution on the nitrogens in the backbone. The solid-state ¹⁵N CP/MAS NMR spectrum of the base form of the enzymatically derived PANI sample showed the clear signature for benzenoid-quinoid repeating units in the polymer backbone.

     

Effect of matrix domination in PANI interpolymer complexes with polyamidosulfonic acids

Various polyaniline (PANI) interpolymer complexes with polyacids in the form of molecular solutions were synthesized by chemical oxidative polymerization of aniline in the presence of water-soluble poly-(2-acrylamido-2-methyl-1-propanesulfonic acid) (flexible backbone), poly-p,p′-(2,2′-disulfoacid)-diphenylene-terephthalamide (t-PASA, rigid backbone), and their mixtures in different ratios. The complexes were characterized by UV-Vis-near infrared spectroscopy in solutions; also, the films’ drop-casts from these solutions were investigated by cyclic voltammetry, spectroelectrochemical, direct current (DC) conductivity, and atomic force microscopy (AFM) measurements. It was shown that the nature of polyacid affects the shape of spectra and the dynamics of their changes. The character of spectral changes during the matrix synthesis of PANI in the presence of mixtures of the rigid-chain and flexible-chain matrixes and the study of spectral properties of the obtained PANI solutions demonstrates the existence of the rigid-matrix domination effect in the process of formation of PANI interpolymer complexes. Spectral properties of the obtained PANI complexes with the mixtures of flexible-chain and rigid-chain polyacids of different ratios (3:1, 1:1, 1:3, and 1:6) are very similar to those ones for the complex with rigid-chain t-PASA. At the same time, there is a correlation between the electrical conductivity and morphology of the films of PANI complexes and their composition, the conductivity passing through a minimum for the complexes with the polyacid mixtures (6:1, 3:1, and 1:1).     

Molecular dynamics simulation of surface morphology and thermodynamic properties of polyaniline nanostructured film

To develop predictive models in nanostructured films, there is an ongoing research to validate molecular dynamics (MD) simulation results with experimental data. The morphology and surface topography of polyaniline (PANI) nanostructured film coated on a TiO₂ nanocrystalline surface were investigated by scanning electron microscopy and atomic force microscopy, respectively. The atomistic model of the simulated PANI was generated using energy minimization with a condensed‐phase optimized molecular potential for atomistic studies force field function to reach a thermodynamic equilibrium state. Various parameters of PANI such as density, energy, cavity size, and free volume distributions are calculated. MD simulation has also been used to obtain specific volume (V) as a function of temperature (T). It is demonstrated that this V–T curve can be used to determinate glass transition temperature T_g, reliably. Although experimental data available for the PANI film are very limited, simulation results such as density and T_g are in good agreement with the experimental values reported in the literature. Comparison of the surface topography of PANI demonstrates a reasonable trend between atomic force microscopy image analysis and the MD simulation results at various temperatures. Copyright © 2014 John Wiley & Sons, Ltd.     

Modifying thermal transport in electrically conducting polymers: effects of stretching and combining polymer chains

If their thermal conductivity can be lowered, polyacetylene (PA) and polyaniline (PANI) offer examples of electrically conducting polymers that can have potential use as thermoelectrics. Thermal transport in such polymers is primarily influenced by bonded interactions and chain orientations relative to the direction of heat transfer. We employ molecular dynamics simulations to investigate two mechanisms to control the phonon thermal transport in PANI and PA, namely, (1) mechanical strain and (2) polymer combinations. The molecular configurations of PA and PANI have a significant influence on their thermal transport characteristics. The axial thermal conductivity increases when a polymer is axially stretched but decreases under transverse tension. Since the strain dependence of the thermal conductivity is related to the phonon scattering among neighboring polymer chains, this behavior is examined through Herman's orientation factor that quantifies the degree of chain alignment in a given direction. The conductivity is enhanced as adjacent chains become more aligned along the direction of heat conduction but diminishes when they are orthogonally oriented to it. Physically combining these polymers reduces the thermal conductivity, which reaches a minimum value for a 2:3 PANI/PA chain ratio.     

Basic amino acid assisted‐fabrication of rectangular nanotube,circular nanotube,and hollow microsphere of polyaniline: Adjusting and controlling effect of pH value

This work reports a simple and effective method to prepare polyaniline (PANI) nanotubes with rectangular or circular cross section and hollow microspheres by using basic amino acids L ‐lysine or L ‐arginine as dopants and pH buffer agents, respectively. The research reveals that the pH value of the reaction solution at the beginning stage is a crucial factor to form PANI microstructures. The L ‐lysine and L ‐arginine have isoelectric point 9.74 and 10.76, which can maintain reaction solution at high pH value at the beginning reaction and assist aniline to couple in ortho‐position forming phenazine unit in the oligomer chain. The oligomer produces rectangular nanorods or microspheres by interaction. These oligomer microstructures act as templates for further polymerization to form PANI rectangular nanotubes and hollow microspheres. Decreasing the concentration of the basic amino acid or using acidic amino acid, the round nanotubes are formed. This method provides a simple route to prepare PANI microstructures with different morphologies without any foreign template or surfactant, and raises a new view on the polymerization process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Bilayer vesicles as precursors for spherical fractal aggregates from the self-assembly of a C60-fullerene-dyad in polar solvent

Spherical fractal aggregates of approximately 10 microm were formed from a pi-electronic amphiphile, C(60)-didodecyloxybenzene dyad when extracted from THF into water, necessitating a critical dielectric constant epsilon > or =30 in binary THF-water mixtures. Molecular dynamics simulations revealed the unit cluster to such a form involves an aggregation number approximately 90 with predominant soft associative molecular interactions which corroborated the octadecahedral model proposed for the cluster growth.     

Molecular recognition effects in polyaniline

Polyaniline (PANI) is known to dissolve in strong acids, such as sulphonic acids. PANI, in its electrically conductive form, is generally regarded to be poorly soluble in low-acidic solvents and to be infusible, closely resembling fully aromatic rigid rod polymers. We show that “less” acidic solvents and plasticizers can be found based on phenyl-phenyl interactions in combination with hydrogen bonding. The requirement is that the interactions are strong enough and, importantly, sterically match the complementary moieties of the sulphonic acid doped PANI. Dihydroxybenzenes and bisphenols are examples of such low-acidic compounds. This type of molecular recognition allows solution and melt processibility of PANI doped by generic sulphonic acid, such as methanesulphonic acid or alkylbenzenesulphonic acid. Molecular recognition is also offered as an explanation for the previously observed high solubility of camphorsulphonic acid (CSA) doped PANI in phenols.     

Direct electrochemistry and electrocatalysis of anthraquinone-monosulfonate/polyaniline hybrid film synthesized by a novel electrochemical doping-dedoping-redoping method on pre-activated spectroscopically pure graphite surface

Polyaniline (PANI) film in the form of emeraldine salt (ES) doped with anthraquinone-2-sulfonate (AQS) was synthesized by a novel electrochemical doping-dedoping-redoping method on pre-activated spectroscopically pure graphite electrode surface. SEM showed the highly porous microstructure with sponge-like morphology of the AQS/PANI hybrid film, which has more available active sites for facilitating electron transfer and energy efficiency of redox reactions. FTIR and UV-vis spectra demonstrated the incorporation of AQS into the conductive PANI matrix. Cyclic voltammetric (CV), electrochemical impedance spectroscope (EIS), rotating ring-disk electrode (RRDE) and chronoamperometry (CA) techniques indicated that the AQS/PANI composite has high electrocatalytic activity and remarkable stability for the two-electron reduction of oxygen via an electrochemical-chemical mechanism at the base of the porous PANI film. The acid centers of PANI (protonated imine group) played an important role not only in two internal redox transform processes, but also in an external charge transfer reaction during the electrocatalytic reduction of oxygen. The incorporation of anionic AQS groups into PANI matrix to prepare electroactive PANI using the electrochemical doping-dedoping-redoping method is conceptually new, and may be extended to the development of new functional materials from many other conducting polymers and quinonoid compounds for wide applications in catalysis, sensors, molecular electronics, and so on.     

模板合成H4PMo11VO40/聚苯胺纳米线列阵及其聚合机理探讨

在氧化铝模板中制备了HPA/PANI纳米线列阵,SEM、TEM表明列阵中纳米线直径约为80 nm;XRD与FT-IR证明形成了有效掺杂;单根纳米线的导电率为16.2 S.cm-1;材料的TG-DTA表明PANI纳米线材料有三步失重过程,失去吸附水过程,多酸失去结晶水和PANI结构持续分解过程,多酸结构分解过程;在氧化聚合过程中H4PMo11VO40即为质子酸又为氧化剂和掺杂剂;聚合反应采用自由基机理进行,掺杂反应发生在形成醌二亚胺式自由基正离子和双苯胺式自由基正离子和醌二亚胺式自由基正离子偶联聚合成链结构时.     

Kinetics and isotherm studies of methyl orange adsorption by a highly recyclable immobilized polyaniline on a glass plate

Immobilized polyaniline on glass plates (PANI/glass) and its powder form were compared for the adsorption of methyl orange (MO) dye from aqueous solutions. The effects of operational parameters such as pH, sorbent dosage, initial concentration, contact time, aeration rate and the thermodynamics of the uptake of MO had been exhaustively evaluated. The maximum adsorption capacity (q_max) for PANI/glass and PANI powder was 93 and 147 mg g⁻¹, respectively. In addition, pseudo-second order model was the best fitted kinetic model for both systems, suggesting that the rate-limiting step may be chemisorptions. The obtained negative values of free energy and enthalpy indicated the adsorption process was spontaneous and exothermic. In contrast to PANI powder, PANI/glass yielded negative entropy. Photocatalytic regeneration of used PANI/glass was found to be highly effective where the desorbed MO was completely mineralized. This study showed that immobilized PANI offered the unique advantage of convenient use and reuse over an extended period of applications.     

ESR studies on polymers with particular electronic and magnetic properties

Measurements on insulating and conducting polymers from the polyaniline (PANI) family and investigations on semiconducting poly(tetrathiafulvalenes) (PTTF) have been used for illustration and discussion of some methodical questions of electron spin resonance (ESR). This concerns especially the new possibilities of the recently developed high-resolution ESR in the 2 mm wave band. It was applied for the study of the nature and dynamics of paramagnetic centres (PC) and charge carriers in PANI and PTTF. The rate of the quasi-one-dimensional (1D) intrachain electron motion and of the three-dimensional (3D) interchain electron hopping has been estimated separately. In iodine - doped PTTF the maximum electrical conductivity is 10⁻⁴ S ·cm⁻¹. It is almost identical with the 3D-conductivity estimated by ESR and shows the typical temperature dependence of a semiconductor. The quasi-1D-conductivity is several orders of magnitude higher and shows in its dependence on temperature similarities with a metal. The PANI samples show in the highly doped form a maximum conductivity of about 10 S ·cm⁻¹ and relativly small differences between the 1D- and 3D-conductivity, supporting the model of metallic islands.     

Engineered Molecular Chain Ordering in Single‐Walled Carbon Nanotubes/Polyaniline Composite Films for High‐Performance Organic Thermoelectric Materials

Single‐walled carbon nanotubes (SWNTs)/polyaniline (PANI) composite films with enhanced thermoelectric properties were prepared by combining in situ polymerization and solution processing. Conductive atomic force microscopy and X‐ray diffraction measurements confirmed that solution processing and strong π–π interactions between the PANI and SWNTs induced the PANI molecules to form a highly ordered structure. The improved degree of order of the PANI molecular arrangement increased the carrier mobility and thereby enhanced the electrical transport properties of PANI. The maximum in‐plane electrical conductivity and power factor of the SWNTs/PANI composite films reached 1.44×10³ S cm^?1 and 217 μW m^?1 K^?2, respectively, at room temperature. Furthermore, a thermoelectric generator fabricated with the SWNTs/PANI composite films showed good electric generation ability and stability. A high power density of 10.4 μW cm^?2 K^?1 was obtained, which is superior to most reported results obtained in organic thermoelectric modules.     

Effect of electrostatic forces control on the structure and properties of polyaniline/graphene oxide nanocomposite

The effects of electrostatic forces (EF), control on the morphology, structure, and electrochemical properties of polyaniline, PANI/graphene oxide (GO), nanocomposites prepared by interfacial electropolymerization (IEP), are studied in this work. FESEM images showed that the IEP method can form the PANI/GO nanocomposites when the EF-control has been found mainly on the PANI nanofibers formation and growth on the GO film surface; and the EF-enhancement can form PANI nanofibers with small nano-diameter, longer length, uniform morphology, high order and well orientation as compared with the EF-reduction-formed sample. The EF-enhancement-formed PANI/GO nanocomposite showed improved electrochemical properties than that of the EF-reduction-formed sample due to the EF-enhancement that enhances the C–N structure for PANI/GO nanocomposite.     

Influence of ethanol on the chain-ordering of carbonised polyaniline

Polyaniline (PANI) was prepared by the oxidation of aniline hydrochloride with ammonium peroxydisulphate in water or in a water-ethanol mixture. In the presence of ethanol, PANI nanotubes and nanorods were observed. Both products were carbonised in a nitrogen atmosphere at 650°C. Initial and carbonised products were characterised by scanning and transmission electron microscopies, thermogravimetric analysis and wide-angle X-ray scattering. Their molecular structure was studied by UV-VIS, infrared, and Raman spectroscopies. Carbonised sample obtained from the PANI salt prepared in the presence of ethanol exhibits Raman spectrum which corresponds to a more ordered carbon-like material than carbonised samples obtained from the PANI base and the PANI salt prepared in pure water. The influence of ethanol present in the reaction mixture on the molecular and supra-molecular structure of PANI and, consequently, on the enhancement of chainordering of carbonised PANI is discussed.     

Electrocatalytic Dioxygen Reduction at Glassy Carbon Electrode Modified with Polyaniline Grafted Multiwall Carbon Nanotube Film

The work details the electrocatalysis of oxygen reduction reaction (ORR) in 0.5 M H₂SO₄ medium on a modified electrode containing a film of polyaniline (PANI) grafted multi‐wall carbon nanotube (MWNT) over the surface of glassy carbon electrode. We have fabricated a novel modified electrode in which conducting polymer is present as connected unit to MWNT. The GC/PANI‐g‐MWNT modified electrode (ME) is fabricated by electrochemical polymerization of a mixture of amine functionalized MWNT and aniline with GC as working electrode. Cyclic voltammetry and amperometry are used to demonstrate the electrocatalytic activity of the GC/PANI‐g‐MWNT‐ME. The GC/PANI‐g‐MWNT‐ME exhibits remarkable electrocatalytic activity for ORR. A more positive onset potential and higher catalytic current for ORR are striking features of GC/PANI‐g‐MWNT‐ME. Rapid and high sensitivity of GC/PANI‐g‐MWNT‐ME to ORR are evident from the higher rate constant (7.92×10² M^?1 s^?1) value for the reduction process. Double potential chronoamperometry and rotating disk and rotating ring‐disk electrode (RRDE) experiments are employed to investigate the kinetic parameters of ORR at this electrode. Results from RDE and RRDE voltammetry demonstrate the involvement of two electron transfer in oxygen reduction to form hydrogen peroxide in acidic media.     

Reversible redox processes of poly(anilines) in layered semiconductor niobate films under alternate UV-vis light illumination

The synthesis of polyaniline (PANI) with semiconducting layered niobate (NbO) to form PANI/NbO hybrid materials and their reversible color change under a unique redox process under the influence of UV and/or visible light have been investigated. The in-situ polymerization of anilinium chlorides (ANI) packed in a regular orientation in a bilayer structure within the NbO interlayers led to PANI/NbO hybrid powders by heat treatment using (NH(4))(2)S(2)O(8) as the catalyst. The resulting PANI of these hybrids showed the characteristics of a fully oxidized quinoid form, i.e., pernigranine (PG). The PANI/NbO suspension in H(2)O was cast on a glass substrate to form a PANI/NbO film after evaporation of the water with a good parallel orientation of the NbO layers against the glass substrate. Upon UV light irradiation in the presence of a reductant such as MeOH, the violet-colored PANI (PG) polymers within the NbO interlayers were reduced by the NbO-induced photocatalytic reactions and led to a colorless PANI, i.e., leucoemeraldine (LE). Moreover, the resulting colorless PANI/NbO films reverted back to a blue-colored PANI, i.e., emeraldine (EM), due to oxidation by the surrounding O(2) gas. The PANI/NbO hybrid films were able to retain repetitive and reversible photoinduced patterning for over 50 cycles under such alternate UV and visible light irradiation.     

聚苯胺的化学合成及其电化学表征

本文用化学聚合法合成了在Ｎ－甲基吡咯烷酮（ＮＭＰ）中可溶的聚苯胺（ＰＡＮＩ）。通过溶液法定量（浓度与体积）制膜，对ＰＡＮＩ膜修饰电极的循环伏安（ＣＶ）性质进行了研究，证实了ＰＡＮＩ膜在１０．０ｍｏｌ／Ｌ ＨＣｌ的介质中，－０．１５￣０．６５Ｖ（ｖｓ．ＳＣＥ）的电位范围内氧化还原单元为八隅体单元。比较了恒电流聚合与化学聚合所得的聚苯胺的ＣＶ性质，发现两者有很好的一致性。     

The conversion of polyaniline nanotubes to nitrogen-containing carbon nanotubes and their comparison with multi-walled carbon nanotubes

Polyaniline (PANI) nanotubes were prepared by the oxidation of aniline in solutions of acetic or succinic acid, and subsequently carbonized in a nitrogen atmosphere during thermogravimetric analysis running up to 830 °C. The nanotubular morphology of PANI was preserved after carbonization. The molecular structure of the original PANI and of the carbonized products has been analyzed by FTIR and Raman spectroscopies. Carbonized PANI nanotubes contained about 8 wt.% of nitrogen. The molecular structure, thermal stability, and morphology of carbonized PANI nanotubes were compared with the properties of commercial multi-walled carbon nanotubes.