Oxidative addition of trifluoromethanesulfonamide to cycloalkadienes

Reactions of trifluoromethanesulfonamide with cyclopentadiene, cyclohexa-1,3- and -1,4-dienes, cyclohepta-1,3,5-triene, and cycloocta-1,3-diene in the presence of t-BuOCl-NaI were studied. Trifluoromethanesulfonamide added at one double bond of cyclopentadiene and cyclohexa-1,3-diene in regio- and stereoselective fashion to give N-(5-iodocyclopent-2-en-1-yl)trifluoromethanesulfonamide and trans-N,N′-cyclohex-3-ene-1,2-diylbis(1,1,1-trifluoromethanesulfonamide), respectively. The reaction with cyclohexa-1,4-diene involved both isolated double bonds to produce N,N′-(2-chloro-5-iodocyclohexane-1,4-diyl)bis(1,1,1-trifluoromethanesulfonamide) which underwent halophilic reduction of the CHI group by the action of NaI and elimination of HCl, leading to N,N′-(cyclohex-2-ene-1,4-diyl)bis(1,1,1-trifluoromethanesulfonamide). Under analogous conditions, cyclohepta-1,3,5-triene was oxidized to benzaldehyde, while no reaction with trifluoromethanesulfonamide occurred.     

Reaction of trifluoromethanesulfonamide with heterodienes under oxidation conditions

Reactions of trifluoromethanesulfonamide with divinyl sulfone, divinyl sulfoxide, divinyl sulfide, diphenyl sulfide, vinyl allyl and diallyl ethers was investigated in the presence of oxidation system t-BuOCl + NaI. The reaction with divinyl sulfone afforded a product of 1,5-heterocyclization, 2,6-diiodo-4-[(trifluoromethyl) sulfonyl]thiomorpholine 1,1-dioxide. The same product was obtained in the reaction with divinyl sulfoxide apparently due to its preliminary oxidation to sulfone. In reactions with divinyl sulfide and unsaturated ethers only the oxidation of substrates was observed accompanied with strong tarring; the products of a reaction with trifluoromethanesulfonamide were absent. With diphenyl sulfide a product was formed resulting from the oxidation at the sulfur atom [S(II) → S(IV)], N-(diphenyl-λ⁴-sulfanylidene)trifluoromethanesulfonamide.     

Reactions of trifluoromethanesulfonamide with amides and paraformaldehyde

Two- and three-component condensations of paraformaldehyde with trifluoromethanesulfonamide, acetamide, trifluoroacetamide, 1H-benzotriazole, methanesulfonamide, and malonamide were studied. N-Hydroxymethyl derivatives of trifluoroacetamide and 1H-benzotriazole reacted with trifluoromethanesulfonamide to give N-(trifluoroacetylaminomethyl)- and N-(1H-benzotriazol-1-ylmethyl)-substituted derivatives of tri-fluoromethanesulfonamide, as well as N,N′-methylenebis(trifluoromethylsulfonamide) and N-(trifluoromethyl-sulfonylaminomethyl)trifluoroacetamide as transamination products. Three-component condensation of trifluoromethanesulfonamide with paraformaldehyde and methanesulfonamide led to the formation of 1-methylsulfonyl-3,5-bis(trifluoromethylsulfonyl)hexahydro-1,3,5-triazine, and the reaction of trifluoromethanesulfonamide with paraformaldehyde and malonamide gave 4,10-bis(trifluoromethylsulfonyl)-2,4,8,10-tetraazaspiro-[5.5]undecane-1,7-dione whose structure was proved by X-ray analysis.     

Synthesis and bromination/dehydrobromination of <Emphasis Type="Italic">N,N</Emphasis>-diallyltrifluoromethanesulfonamide

The reaction of triflluoromethanesulfonamide with allyl bromide in dimethyl sulfoxide gave N,N-diallyltrifluoromethanesulfonamide which was subjected to bromination with 1 and 2 equiv of bromine. The product of bromine addition to both allyl groups, CF₃SO₂N(CH₂CHBrCH₂Br)₂, was found to exist as a mixture of two diastereoisomers at a ratio of 9: 11. Its dehydrobromination by the action of sodium methoxide was chemoselective with successive elimination of one, two, and three hydrogen bromide molecules to afford N-(2-bromoprop-2-en-1-yl)-N-(2,3-dibromopropyl)trifluoromethanesulfonamide, N,N-bis(2-bromoprop-2-en-1-yl)trifluoromethanesulfonamide, and N-(2-bromoprop-2-en-1-yl)-N-(propadienyl)trifluoromethanesulfonamide, respectively.     

Kinetics and mechanism of benzyl <Emphasis Type="Italic">para</Emphasis>-chlorophenyl ketone oxidation

The oxidation of benzyl para-chlorophenyl ketone in chlorobenzene at 100°C occurs through the formation of short chains. Non-peroxide reaction products (1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone, para-chlorobenzyl, benzaldehyde, and para-chlorobenzoic acid) are formed not only by the transformation of hydroperoxide (1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone) but also (or solely) through the recombination of α-ketoperoxyl radicals with or without chain termination. α-Hydroperoxide decomposes predominantly through a heterolytic route to form para-chlorobenzoic acid and benzaldehyde. Benzaldehyde and 1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone undergo radical chain oxidation in the reaction medium to form benzoic acid (benzaldehyde), para-chlorobenzyl, and benzoic and para-chlorobenzoic acids (1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone). The homolytic decomposition of α-hydroperoxy ketone and α-hydroxy-α-hydroperoxy ketone causes the self-acceleration of the process and affords 1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone or, to a lesser extent, benzaldehyde and para-chlorobenzoic acid (α-hydroperoxy ketone). para-Chlorobenzoic acid substantially accelerates the heterolytic decomposition of α-hydroxy-α-hydroperoxy ketone and the oxidation of benzyl para-chlorophenyl ketone with peroxy acids to ester according to the Baeyer-Villiger mechanism. The rate constants of the main steps of the process and kinetic parameters are calculated by solving the inverse kinetic problem.     

An effective BINAP and microwave accelerated palladium-catalyzed amination of 1-chloroisoquinolines in the synthesis of new 1,3-disubstituted isoquinolines

A facile and microwave accelerated reaction of 1-chloro-3-(4-chlorophenyl)isoquinoline with various heterocyclic amines, catalyzed by Pd, in the presence of BINAP additive and sodium carbonate as the base, leads to the formation of 3-(4-chlorophenyl)-1-(1H-1,2,3-triazol-1-yl)isoquinoline, 3-(4-chlorophenyl)-1-(1H-imidazol-1-yl)isoquinoline and 3-(4-chlorophenyl)-1-(1H-1,2,4-triazol-1-yl)isoquinoline via Buchwald protocol in good yields. Similarly pyrazolylisoquinolines are also reported.     

Reaction of trifluoromethanesulfonamide with alkenes and cycloocta-1,5-diene under oxidative conditions. Direct assembly of 9-heterobicyclo[4.2.1]nonanes

Reactions of trifluoromethanesulfonamide with α-methylstyrene, 2-methylpent-1-ene, and cycloocta-1,5-diene in the system t-BuOCl-NaI were studied. In the reaction with α-methylstyrene 1-iodo-2-phenylpropan-2-ol was the only isolated product. The reaction with 2-methylpent-1-ene gave a mixture of N,N′-(2-methylpentane-1,2-diyl)bis(trifluoromethanesulfonamide), trifluoro-N-(2-hydroxy-2-methylpentyl)-methanesulfonamide, and N,N′-[oxybis(2-methylpentan-2,1-diyl)]bis(trifluoromethanesulfonamide). Trifluoromethanesulfonamide reacted with cycloocta-1,5-diene to produce a mixture of 2,5-diiodo-9-(trifluoromethylsulfonyl)-9-azabicyclo[4.2.1]nonane and 2,5-diiodo-9-oxabicyclo[4.2.1]nonane; this reaction may be regarded as the first example of direct assembly of bicyclononane skeleton.     

Formation of unexpected products in the attempted aziridination of styrene with trifluoromethanesulfonyl nitrene

The reaction of styrene with trifluoromethanesulfonyl nitrene generated from trifluoromethanesulfonamide in the system (t-BuOCl+NaI) results in the formation of trifluoro-N-[2-phenyl-2-(trifluoromethylsulfonyl)aminoethyl]methanesulfonamide, 1-phenyl-2-iodo-ethanol, and 2,5-diphenyl-1,4-bis(trifluoromethylsulfonyl)piperazine rather than the expected product of aziridination, 2-phenyl-1-(trifluoromethylsulfonyl)aziridine. The mechanism of the reaction is discussed.     

Unusual michael reaction of 3-(4-Chlorophenyl)-1-phenylprop-2-en-1-one with 3-amino-N-phenyl-3-thioxopropanamide

3-(4-Chlorophenyl)-1-phenylprop-2-en-1-one reacted with 3-amino-N-phenyl-3-thioxopropanamide under basic conditions in ethanol to give a mixture of 3-(4-chlorophenyl)-2-cyano-5-oxo-N,5-diphenylpentanamide and 3-(4-chlorophenyl)-1,5-diphenylpentane-1,5-dione. The structure of the former was determined by X-ray analysis. The reaction of the same compounds in DMSO in the presence of sodium hydroxide produced 4-(4-chlorophenyl)-N,6-diphenyl-2-thioxo-1,2,3,4-tetrahydropyridine-3-carboxamide.     

Benzyne cyclisation with carbanion activated aromatic rings1

Attempts to cyclise o-chlorophenyl benzyl ether, sulphide, sulphoxide and sulphone by treatment with KNH₂/NH₃ were unsuccessful. Similar reaction of 1-(o-chlorophenyl)-2,2-diphenylethane led to amination whereas α-(o-chlorobenzyl)phenylacetic acid gave a dihydrocoumarin. Reaction of 4- and 2-(o-chlorophenethyl)-pyridines, however, afforded products comprising benzisoquinolines and 1-pyridylbenzocyclobutenes.     

Effect of the aryl group substituent in the dimerization of 3-arylisoxazoles to syn 2,6-diaryl-3,7-diazatricyclo[4.2.0.0]octan-4,8-diones induced by LDA

3-Arylisoxazoles react with LDA in THF at 0 °C affording syn-2,6-diaryl-3,7-diazatricyclo[4.2.0.0^2,5]octan-4,8-diones (bis-azetidinones), via stereoselective dimerization of an azetinone anion intermediate. A fragmentation reaction affording arylnitriles may compete with electronic and steric effects of the substituent present in the aryl group being pivotal in determining the outcome of this reaction. An interesting behaviour with LDA of arylnitriles arising from the fragmentation reaction of some 3-arylisoxazoles was also observed. N,N-Diisopropylaminobenzonitriles were in fact formed (plausibly via a benzyne mechanism) from 3-(4-chlorophenyl)isoxazole and 3-(2-chlorophenyl)isoxazole, whereas 3-(2-methylphenyl)isoquinolin-1-amine was isolated starting from 3-(2-methylphenyl)isoxazole and LDA.     

One-pot synthesis of highly substituted pyrroles using nano copper oxide as an effective heterogeneous nanocatalyst

A convenient one-pot four-component reaction of aromatic aldehydes, β-keto esters and nitromethane in the presence an amine and 10 mol% CuO nanoparticles for the synthesis of highly substituted pyrroles is described. Excellent yields, easily available and less expensive catalyst and easy work-up are the key features of the present method. The NMR spectrum was coupled with quantum chemical calculations in DFT approach using the hybrid B3LYP exchange-correlation functional to confirm the structures of (1-benzyl-4-(4-chlorophenyl)-2-methyl-1H-pyrrol-3-yl)(phenyl)methanone 14 and 1-(1-benzyl-4-(4-chlorophenyl)-2-phenyl-1H-pyrrol-3-yl)ethanone 14′.     

Regioselectivity in the reactions of <Emphasis Type="Italic">N</Emphasis>-(polychloroethylidene)-sulfonamides with 1<Emphasis Type="Italic">H</Emphasis>-pyrrole and 1-methyl-1<Emphasis Type="Italic">H</Emphasis>-pyrrole

N-(2,2,2-Trichloroethylidene)arenesulfonamides react with 1H-pyrrole and 1-methyl-1H-pyrrole to give the corresponding N-[2,2,2-trichloro-1-(1H-pyrrol-2-yl)ethyl]arenesulfonamides. The reaction of N-(2,2,2-trichloroethylidene)trifluoromethanesulfonamide with pyrrole leads to a mixture of 2-mono-and 2,5-disubstituted pyrroles, whereas in the reaction with 1-methyl-1H-pyrrole only the 2-substituted compound is formed. N-(2,2-Dichloro-2-phenylethylidene)-4-methylbenzenesulfonamide reacts with 1H-pyrrole to form N-[2,2-dichloro-2-phenyl-1-(1H-pyrrol-2-yl)ethyl]-4-methylbenzenesulfonamide, and its reaction with 1-methyl-1H-pyrrole gives a mixture of 2-and 3-monosubstituted derivatives. The results of quantum-chemical calculations of the initial reactants and products indicate that the process is orbital-controlled. A good agreement is observed between the experimental data and theoretical conclusions concerning the dependence of the reaction regioselectivity on the nature of substituents in the electrophile molecule.     

Experimental and theoretical investigation of self-association in inert environment of new triflamide derivatives

According to the data of IR spectroscopy and quantum chemical calculations N-(2-phenylethyl) trifluoromethanesulfonamide exists in an inert solvent CCl₄ as an equilibrium mixture of the monomer and chain associates; in contrast, N-(5-iodocyclopentenyl)-1,1,1-trifluoromethanesulfonamide under the same conditions is prone to the formation of cyclic self-associates. The behavior of N,N′-(cyclohexenediyl)-bis(1,1,1-trifluoromethane sulfonamide) in the same medium is far more complicated: apart from the monomer with intramolecular hydrogen bonds (HB), it forms only cyclic self-associates with eight-membered and eleven-membered rings.     

Synthesis and study of the azide-tetrazole tautomerism in 2-azido-4-(trifluoromethyl)-6-R-pyrimidines (R = H, 4-ClC<Subscript>6</Subscript>H<Subscript>4</Subscript>)

Azide-tetrazole equilibrium in azidopyrimidines bearing trifluoromethyl group on the example of 2-azidopyrimidines has been studied. The latter were synthesized via nitrosation of 2-hydrazino-4-trifluoromethylpyrimidine and reaction of NaN₃ with 4-trifluoromethyl-2- chloro-6-(4-chlorophenyl)pyrimidine. The tautomeric equilibrium 5-trifluoro methyl tetrazolo[1,5-a]pyrimidine ? 2-azido-4-trifluoromethylpyrimidine was observed in the absence of solvent and in DMSO-d₆ solution, whereas in CDCl³ only an azide form exists. For 2-azido- 4-trifluoromethyl-6-(4-chlorophenyl)pyrimidine, only an azide isomer was detected in CDCl³ solution, and in DMSO-d₆ solution it is in equilibrium with 5-(trifluoromethyl)-7-(4-chlorophenyl) tetrazolo[1,5-a]pyrimidine (the tautomer ratio is 99 : 1). Thermodynamic and kinetic parameters of 5-trifluoromethyltetrazolo[1,5-a]pyrimidine ? 2-azido-4-trifluoromethylpyri midine tautomeric rearrangement in DMSO-d₆ for 5-trifluoromethyltetrazolo[1,5-a]pyrimidine were determined using the exchange spectroscopy (EXSY) technique.     

Reactions of 1,2,3-Triazoles with Trifluoromethanesulfonyl Chloride and Trifluoromethanesulfonic Anhydride

Reactions of 4,5-dibromo-1,2,3-triazole, 1H-1,2,3-benzotriazole, and 2-phenyl-2H-1,2,3-triazole-4-carbonyl chloride with trifluoromethanesulfonyl chloride and trifluoromethanesulfonic anhydride were studied. 4,5-Dibromo-1,2,3-triazole sodium salt reacted with CF₃SO₂Cl in tetrahydrofuran to give 4,5-dibromo-2-(2-tetrahydrofuryl)-2H-1,2,3-triazole rather than expected 4,5-dibromo-2-trifluoromethylsulfonyl-2H-1,2,3-triazole. The latter was synthesized by treatment of 4,5-dibromo-1,2,3-triazole sodium salt with trifluoromethanesulfonic anhydride. The reaction of benzotriazole with (CF₃SO₂)₂O afforded 1-trifluoromethylsulfonyl-1H-1,2,3-benzotriazole and 1,2,3-benzotriazolium trifluoromethanesulfonate. 2-Phenyl-2H-1,2,3-triazole-4-carbonyl chloride reacted with trifluoromethanesulfonamide sodium salt in DMF, yielding N-(dimethylaminomethylene)trifluoromethanesulfonamide. Possible ways for formation of the unexpected products were proposed.     

Rhodium/diene-catalyzed asymmetric arylation of N-Boc-protected α,β-unsaturated δ-lactam with arylboronic acids: enantioselective synthesis of 4-aryl-2-piperidinones

Utilizing toluene/isopropanol (20:1 to 40:1) as a solvent and KHF₂ as an additive, the rhodium/diene-catalyzed asymmetric arylation (RCAA) reaction of arylboronic acids to N-Boc-protected α,β-unsaturated δ-lactam proceeded smoothly to afford chiral 4-aryl-2-piperidinones with high to excellent yields (up to 94%) and enantioselectivities (up to >99% ee). Further conversion of adduct (R)-1-(tert-butyloxycarbonyl)-4-(4-chlorophenyl)-2-piperidone to (R)-Homobaclofen hydrochloride was also presented.     

Synthesis and oxidation of (E)-1,2-diphenyl-2-(arylimino) ethanol derivatives

The compounds (E)-1,2-diphenyl-2-(phenylimino)ethanol, (E)-1,2-diphenyl-2-(p-tolylimino)ethanol, and (E)-2-((4-chlorophenyl)imino)-1,2-diphenylethanol) were synthesized by reaction of a p-substituted aniline with benzoin then oxidized with chromium trioxide–triethylamine in chloroform to give (E)-1,2-diphenyl-2-(phenylimino)ethanone, (E)-1,2-diphenyl-2-(p-tolylimino)ethanone, and (E)-2-((4-chlorophenyl)imino)-1,2-diphenylethanone in very high yield. The products were characterized by IR and NMR spectral analysis.     

Friedel-crafts cyclisation—IV: Intramolecular vs intermolecular acylation with β-aryl derivatives of propionyl chloride in aromatic substrates

Studies on the aluminium chloride-catalysed behaviour of β-phenylpropionyl, β,β-diphenylpropionyl, and β,β,β-triphenylpropionyl chlorides in anisole and some other aromatic stubstrates under standardised conditions are discussed. β,β-Diphenylpropionyl chloride gave yields of up to 27% 3-phenylindan-1-one in anisole and is one of the most easily cyclised acid chlorides so far reported. β,β,β-Triphenylpropionyl is less easily cyclised in anisole to 3,3-diphenylindan-1-one and its transformation product 2,3-diphenylind-1-one. The expected open-chain ketone is completely decomposed into products of αβ-ketonic cleavage and a subsequent redox reaction. Differences in ratios of intermolecular to intramolecular acylation (now called o/c ratios) are discussed.In benzene, β-bis-(p-chlorophenyl)propionyl chloride gave, in addition to the previously noted β-bis-(p-chlorophenyl)propiophenone (48%), the folloowing compounds: 6-chloro-3-(p-chlorophenyl)indan-1-one (4%) (the intramolecular acylation product), β-(p-chlorophenyl)-β-phenylpropiophenone (2·3%), ββ-diphenylpropiophenone (0·5%), 3-(p-chlorophenyl)-indan-1-one (5·2%). The transformation processes are discussed. Aluminium chloride-catalysed β-aryl exchange in acid chlorides is reported for the first time, but β-aryl exchange does not occur in ββ-(or 3,3-)di-aryl derivatives of indan-1-one.     

Poly(sulfone ether amide amide)s as a new generation of soluble, thermally stable polymers

A new sulfone ether amide diamine was synthesized via three steps, starting from reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide afforded N-(4-hydroxy phenyl)-4-nitrobenzamide (HPNB). In the next step, reduction of nitro group resulted in preparation of 4-amino-N-(4-hydroxy phenyl) benzamide (AHPB). Final step in the preparation of diamine was the reaction of AHPB with bis(4-chlorophenyl) sulfone in the presence of K₂CO₃. All the materials were characterized using conventional spectroscopic methods. Poly(sulfone ether amide amide)s were synthesized by polycondensation reactions of prepared diamine with different diacid chlorides (aromatic and aliphatic ones). The obtained polymers were fully characterized and their physical properties including thermal behavior, thermal stability, solubility, and inherent viscosity were studied.