Photothermal reshaping of gold nanorods depends on the passivating layers of the nanorod surfaces

Photothermal reshaping of gold nanorods was triggered by pulsed-laser irradiation. The efficiency of the reshaping was strongly dependent on the surface conditions of the gold nanorods. When the gold nanorods were dispersed in concentrated hexadecyltrimethylammonium bromide (CTAB), the gold nanorods were efficiently transformed into a phi-shape. By comparison when poly(styrene sulfonate), poly(vinylpyrrolidone), poly(ethylene glycol), or phosphatidylcholine layers were used, the CTAB layers were found to be a better thermal insulator that helped to enhance the photothermal reshaping of the gold nanorods.     

Precise placement of gold nanorods by capillary assembly

Capillary assembly was explored for the precise placement of 25 nm × 70 nm colloidal gold nanorods on prestructured poly(dimethylsiloxane) template surfaces. The concentration of nanorods and cationic surfactant cetyltrimethylammonium bromide (CTAB), the template wettability, and most critically the convective transport of the dispersed nanorods were tuned to study their effect on the resulting assembly yield. It is shown that gold nanorods can be placed into arrayed 120-nm diameter holes, achieving assembly yields as high as 95% when the local concentration of nanorods at the receding contact line is sufficiently high. Regular arrays of gold nanorods have several benefits over randomly deposited nanorod arrangements. Each assembled nanorod resides at a precisely defined location and can easily be found for subsequent characterization or direct utilization in a device. The former is illustrated by collecting scattering spectra from single nanorods and nanorod dimers, followed by subsequent SEM characterization without the need for intricate registration schemes.     

小尺寸金纳米棒的快速制备及影响因素的研究

通过研究十六烷基三甲基溴化铵、抗坏血酸、NaBH4和AgNO3的用量,以及搅拌时间、反应时间对无种子生长法制备金纳米棒的影响,筛选出了最佳制备条件,以及各成分对金纳米棒生长过程中的作用.采用可见吸收光谱和透射电镜图对不同条件下所制备出的金纳米棒进行了表征.在室温为28℃,CTAB浓度为0.1 mol/L、AgNO3浓度为96μmol/L、AA浓度为0.97 mmol/L、NaBH4浓度为1.5μmol/L,搅拌25 s等最佳条件下,只需反应6h就能够成功制备出长径比为5且形貌均匀、分散性和稳定性良好、轴宽较小的金纳米棒,且有望应用于水环境中Hg2+的检测.     

Thorough tuning of the aspect ratio of gold nanorods using response surface methodology

In the present work a central composite design based on response surface methodology (RSM) is employed for fine tuning of the aspect ratios of seed-mediated synthesized gold nanorods (GNRs). The relations between the affecting parameters, including ratio of l-ascorbic acid to Au³⁺ ions, concentrations of silver nitrate, CTAB, and CTAB-capped gold seeds, were explored using a RSM model. It is observed that the effect of each parameter on the aspect ratio of developing nanorods highly depends on the value of the other parameters. The concentrations of silver ions, ascorbic acid and seeds are found to have a high contribution in controlling the aspect ratios of NRs. The optimized parameters led to a high yield synthesis of gold nanorods with an ideal aspect ratio ranging from 1 (spherical particle) to 4.9. In addition, corresponding tunable surface Plasmon absorption band has been extended to 880 nm. The resulted nanorods were characterized by UV–visible spectrometry and transmission electron microscopy.     

Short gold nanorod growth revisited: the critical role of the bromide counterion

A one-step, surfactant-assisted, seed-mediated method has been utilized for the growth of short gold nanorods with reasonable yield by modifying an established synthesis protocol. Among the various parameters that influence nanorod growth, the impact of the bromide counterion has been closely scrutinized. During this study it has been shown that, irrespective of its origin, the bromide counterion [cetyltrimethylammonium bromide (CTAB) or NaBr] plays a crucial role in the formation of nanorods in the sense that there is a critical [Br(-)]/[Au(3+)] ratio (around 200) to achieve nanorods with a maximum aspect ratio. Beyond this value, bromide can be considered as a poisoning agent unless shorter nanorods are required. The use of AgNO(3) helps in symmetry breaking for gold nanorod growth, whereas the bromide counterion controls the growth kinetics by selective adsorption on the facets of the growth direction. Thus, a proper balance between bromide ions and gold cations is also one of the necessary parameters for controlling the size of the gold nanorods; this has been discussed thoroughly. The results have been discussed based on their absorption spectra and finally shape evolution has been confirmed by TEM. Due to their efficient absorption in the near-IR region, these short nanorods were used in photothermal imaging of living COS-7 cells with improved signal-to-background ratios.     

无种子法纳米金棒的制备及其对肿瘤细胞光热治疗效应研究

采用简便快捷的无种子法一步完成了纳米金棒的制备.通过改变实验条件可以调控纳米金棒的吸收峰从可见到近红外转移.将巯基聚乙二醇(PEG-SH)置换金棒表面的十六烷基三甲基溴化铵(CTAB)分子,大大提高了金棒的生物相容性.制备的纳米金棒在近红外(NIR)光照射下对肿瘤细胞有很好的杀伤效果.研究结果为纳米金棒用于抗肿瘤治疗提供了实验基础.     

无种子法纳米金棒的制备及其对肿瘤细胞光热治疗效应研究

采用简便快捷的无种子法一步完成了纳米金棒的制备. 通过改变实验条件可以调控纳米金棒的吸收峰从可见到近红外转移. 将巯基聚乙二醇（PEG-SH）置换金棒表面的十六烷基三甲基溴化铵（CTAB）分子,大大提高了金棒的生物相容性. 制备的纳米金棒在近红外（NIR）光照射下对肿瘤细胞有很好的杀伤效果.研究结果为纳米金棒用于抗肿瘤治疗提供了实验基础.     

Gold nanorods as nanoadmicelles: 1-naphthol partitioning into a nanorod-bound surfactant bilayer

As-prepared gold nanorods, stable in aqueous solution, bear a bilayer of the cationic surfactant cetyltrimethylammonium bromide (CTAB). This bilayer provides a approximately 3 nm thick hydrophobic layer that could be used to sequester hydrophobic organic molecules from aqueous solution. We have investigated the uptake of 1-naphthol as a model hydrophobic compound by CTAB-coated gold nanorods using both ultraviolet-visible spectroscopy and gas chromatography with flame ionization detection. We find the adsorption isotherm of 1-naphthol partitioning into the CTAB bilayer on gold nanorods fits the Langmuir model. The maximum number of bound 1-naphthol molecules is 14.6 +/- 2.2 x 10(3) molecules per gold nanorod, with an equilibrium binding constant of 1.97 +/- 0.79 x 10(4) M(-1) at room temperature.     

Surface modification of gold nanorods through a place exchange reaction inside an ionic exchange resin

A place exchange reaction between 11-mercaptoundecanoic acids (MUA) and cetyltrimethylammonium bromide (CTAB)-protected gold nanorods (GNRs) was conducted inside an ionic exchange resin; this modification resulted in functional gold nanorods soluble in both polar and nonpolar organic solvents.     

Immobilization of gold nanorods onto acid-terminated self-assembled monolayers via electrostatic interactions

We report the immobilization of gold nanorods onto self-assembled monolayers (SAMs) of 16-mercaptohexadecanoic acid (16-MHA). The simple two step protocol involves formation of a SAM of 16-MHA molecules onto gold-coated glass slides and subsequent immersion of these slides into the gold nanorod solution. The nanorods, formed by a seed-mediated, surfactant-assisted synthesis protocol, are stabilized in solution due to surface modification by the surfactant cetyltrimethylammonium bromide (CTAB). Attractive electrostatic interactions between the carboxylic acid group on the SAM and the positively charged CTAB molecules are likely responsible for the nanorod immobilization. UV-vis spectroscopy has been used to follow the kinetics of the nanorod immobilization. The nature of interaction between the gold nanorods and the 16-MHA SAM has been probed by Fourier transform infrared spectroscopy (FTIR). The surface morphology of the immobilized rods is studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM) measurements. SEM was also used to determine the density of the immobilized nanorods as a function of the pH of immobilization. Control over the surface coverage of the immobilized gold nanorods has been demonstrated by simple pH variation. Such well-dispersed immobilized gold nanorods with control over the surface coverage could be interesting substrates for applications such as surface-enhanced Raman spectroscopy (SERS).     

A seedless approach to continuous flow synthesis of gold nanorods

A direct seedless method for the continuous synthesis of gold nanorods has been developed using a sequential rotating tube-narrow channel processing microfluidic configuration, with the stock feed solutions (HAuCl(4)/CTAB/acetylacetone and AgNO(3)/CTAB/carbonate buffer) being stable for weeks.     

Mechanism of silver(I)-assisted growth of gold nanorods and bipyramids

The seed-mediated growth of gold nanostructures is shown to be strongly dependent on the gold seed nanocrystal structure. The gold seed solutions can be prepared such that the seeds are either single crystalline or multiply twinned. With added silver(I) in the cetyltrimethylammonium bromide (CTAB) aqueous growth solutions, the two types of seeds yield either nanorods or elongated bipyramidal nanoparticles, in good yields. The gold nanorods are single crystalline, with a structure similar to those synthesized electrochemically (Yu, Y. Y. et al. J. Phys. Chem. B 1997, 101, 6661). In contrast, the gold bipyramids are pentatwinned. These bipyramids are strikingly monodisperse in shape. This leads to the sharpest ensemble longitudinal plasmon resonance reported so far for metal colloid solutions, with an inhomogeneous width as narrow as 0.13 eV for a resonance at approximately 1.5 eV. Ag(I) plays an essential role in the growth mechanism. Ag(I) slows down the growth of the gold nanostructures. Ag(I) also leads to high-energy side facets that are {110} for the single crystalline gold nanorods and unusually highly stepped {11n} (n approximately 7) for the bipyramid. To rationalize these observations, it is proposed that it is the underpotential deposition of Ag(I) that leads to the dominance of the facets with the more open surface structures. This forms the basis for the one-dimensional growth mechanism of single crystal nanorods, while it affects the shape of the nanostructures growing along a single twinning axis.     

Challenge in understanding size and shape dependent toxicity of gold nanomaterials in human skin keratinocytes

As the nanotechnology field continues to develop, assessing nanoparticle toxicity is very important for advancing nanoparticles for biomedical application. Here we report cytotoxicity of gold nanomaterial of different size and shape using MTT test, absorption spectroscopy and TEM. Spherical gold nanoparticles of different sizes are not inherently toxic to human skin cells, but gold nanorods are highly toxic due to the presence of CTAB as coating material. Due to toxicity of CTAB, and aggregation of gold nanomaterials in the presence of cell media, we have demonstrated that it is difficult to understand the cytotoxicity of gold nanomaterials individually.     

金纳米棒荧光探针应用于多酚化合物检测新方法

以金纳米棒为荧光探针,在20％甲醇(pH 5.0～6.0)介质中,以植物多酚化合物芒果苷、瑞香素和白藜芦醇为检测对象,建立了3种植物多酚的灵敏、简便、快速检测新方法.多酚化合物基于其与金纳米棒表面的十六烷基三甲基溴化铵(CTAB)分子间的疏水作用而在金纳米棒表面富集,同时使金纳米棒在719 nm处的荧光强度减弱,在一定范围内多酚化合物的浓度与金纳米棒荧光强度成正比,其检出限分别为5.0×10-8、8.0×10-8、2.0×10 -7mol/L.     

Surfactant (bi)layers on gold nanorods

Gold nanorods in aqueous solution are generally surrounded by surfactants or capping agents. This is crucial for anisotropic growth during synthesis and for their final stability in solution. When CTAB is used, a bilayer has been evidenced from analytical methods even though no direct morphological characterization of the precise thickness and compactness has been reported. The type of surfactant layer is also relevant to understand the marked difference in further self-assembling properties of gold nanorods as experienced using 16-EO(1)-16 gemini surfactant instead of CTAB. To obtain a direct measure of the thickness of the surfactant layer on gold nanorods synthesized by the seeded growth method, we coupled TEM, SAXS, and SANS experiments for the two different cases, CTAB and gemini 16-EO(1)-16. Despite the strong residual signal from micelles in excess, it can be concluded that the thickness is imposed by the chain length of the surfactant and corresponds to a bilayer with partial interdigitation.     

Cetyltrimethylammonium bromide silver bromide complex as the capping agent of gold nanorods

A complex between cetyltrimethylammonium bromide (CTAB) surfactant and silver bromide (CTASB) is recognized by NMR and X-ray photoelectron spectroscopy (XPS) to be the entity at the surface of gold nanorods, resulting from an in situ formation in the classical scheme of synthesis. It can thus be introduced directly along with the initial reactants in place of silver(I) salt to produce a new effective synthesis of these objects. Complementary XPS and quartz crystal microbalance (QCM) measurements on macroscopic gold surfaces confirm a strong adsorption of CTASB that is higher than that of CTAB and any other CTAX surfactants. The role of CTASB as a rod inducing agent by surface complexation is stressed.     

Quantitation of metal content in the silver-assisted growth of gold nanorods

The seed-mediated approach to making gold nanorods in aqueous surfactant solutions has become tremendously popular in recent years. Unlike the use of strong chemical reductants to make spherical gold nanoparticles, the growth of gold nanorods requires weak reducing conditions, leading to an unknown degree of gold reduction. The metal content of gold nanorods, made in high yield in the presence of silver ion, is determined by inductively coupled plasma atomic emission spectroscopy. Through the use of the known gold concentration in nanorods, molar extinction coefficients are calculated for nanorods of varying aspect ratios from 2.0 to 4.5. The extinction coefficients at the longitudinal plasmon band peak maxima for these nanorods vary from 2.5x10(9) to 5.5x10(9) M-1 cm-1, respectively, on a per-particle basis. Many of the gold ions present in the growth solution remain unreacted; insights into the growth mechanism of gold nanorods are discussed.     

Synthesis and optical properties of small Au nanorods using a seedless growth technique

Gold nanoparticles have shown potential in photothermal cancer therapy and optoelectronic technology. In both applications, a call for small size nanorods is warranted. In the present work, a one-pot seedless synthetic technique has been developed to prepare relatively small monodisperse gold nanorods with average dimensions (length × width) of 18 × 4.5 nm, 25 × 5 nm, 15 × 4.5 nm, and 10 × 2.5 nm. In this method, the pH was found to play a crucial role in the monodispersity of the nanorods when the NaBH(4) concentration of the growth solution was adjusted to control the reduction rate of the gold ions. At the optimized pH and NaBH(4) concentrations, smaller gold nanorods were produced by adjusting the CTAB concentration in the growth solution. In addition, the concentration of silver ions in the growth solution was found to be pivotal in controlling the aspect ratio of the nanorods. The extinction coefficient values for the small gold nanorods synthesized with three different aspect ratios were estimated using the absorption spectra, size distributions, and the atomic spectroscopic analysis data. The previously accepted relationships between the extinction coefficient or the longitudinal band wavelength values and the nanorods' aspect ratios found for the large nanorods do not extend to the small size domain reported in the present work. The failure of extending these relationships over larger sizes is a result of the interaction of light with the large rods giving an extinction band which results mostly from scattering processes while the extinction of the small nanorods results from absorption processes.     

Tailoring the synthesis and heating ability of gold nanoprisms for bioapplications

The paper describes a novel and straightforward wet-chemical synthetic route to produce biocompatible single-crystalline gold tabular nanoparticles, herein called nanoprisms (NPRs) due to their characteristic shape. Besides the novelty of the method to produce NPRs with an unprecedented high yield, the synthesis avoids the use of highly toxic cetyltrimethylammonium bromide (CTAB), the most widely used surfactant for the synthesis of gold anisotropic nanoparticles such as nanorods or nanoprisms. The method presented here allows for tuning the edge length of NPRs in the range of 100-170 nm by adjusting the final concentration/molar ratio of gold salt and reducing agent (thiosulfate), while the thickness of NPRs remained constant (9 nm). Thus, the surface plasmon band of NPRs can be set along the near-infrared (NIR) range. The resulting NPRs were derivatized with heterobifunctional polyethylene glycol (PEG) and 4-aminophenyl β-D-glucopyranoside (glucose) chains to improve their stability and cellular uptake, respectively. The heating properties of colloidal solutions of NPRs upon 1064 nm light illumination were evaluated. As a proof of concept, the biocompatibility and suitability of functional NPRs as photothermal agents were studied in cell cultures. Due to their biocompatibility (avoiding CTAB), ease of production, ease of functionalization, and remarkable heating features, the NPRs discussed herein represent a significant advance in the biocompatibility of nanoparticles and serve as an attractive alternative to those currently in use as plasmonic photothermal agents.     

Surface modification of cetyltrimethylammonium bromide-capped gold nanorods to make molecular probes

A chemical procedure to replace the cetyltrimethylammonium bromide (CTAB) cap on gold nanorods (GNRs) fabricated through seed-mediated growth with organothiol compounds [3-animo-5-mercapto-1,2,4-triazole (AMTAZ) and 11-mercaptoundecaonic acid (MUDA)] was developed to reduce the cytotoxity of GNRs and facilitate further biofunctionalization. Compared to phosphatidylcholine (PC) modification, our procedure yields stable GNRs that are biocompatible and suitable for whole-cell studies. The PC-, AMTAZ-, and MUDA-activated GNRs all showed low cytotoxicity. By choosing different organothiols, net positive or negative charges could be created on the nanorod surface, for different applications. Gold nanorod molecular probes (GNrMPs) were fabricated by subsequent attachment of antibodies to the activated GNRs and were used to visualize and detect cell surface biomarkers in normal and transformed human breast epithelial cells, demonstrating the potential of developing novel biosensors using gold nanorods. The sensitivity of GNrMPs made from organothiol-activated GNRs is considerably higher than that of CTAB/PC-activated GNRs, demonstrating that the protocol reported here is favored in developing molecular probes using GNRs.