Structural diversity in solvated lithium aryloxides. Syntheses, characterization, and structures of [Li(OAr)(THF)x]n and [Li(OAr)(py)x]2 complexes where OAr = OC6H5, OC6H4(2-Me), OC6H3(2,6-(Me))2, OC6H4(2-Pr(i)), OC6H3(2,6-Pr(i)))2, OC6h4(2-Bu(t)), OC6H3(2,6-Bu(t)))2

A series of sterically varied aryl alcohols H-OAr [OAr = OC6H5 (OPh), OC6H4(2-Me) (oMP), OC6H3(2,6-(Me))2 (DMP), OC6H4(2-Pr(i)) (oPP), OC6H3(2,6-(Pr(i)))2 (DIP), OC6H4(2-Bu(t)) (oBP), OC6H3(2,6-(Bu(t)))2 (DBP); Me = CH3, Pr(i) = CHMe2, and Bu(t) = CMe3] were reacted with LiN(SiMe3)2 in a Lewis basic solvent [tetrahydrofuran (THF) or pyridine (py)] to generate the appropriate "Li(OAr)(solv)x". In the presence of THF, the OPh derivative was previously identified as the hexagonal prismatic complex [Li(OPh)(THF)]6; however, the structure isolated from the above route proved to be the tetranuclear species [Li(OPh)(THF)]4 (1). The other "Li(OAr)(THF)x" products isolated were characterized by single-crystal X-ray diffraction as [Li(OAr)(THF)]4 [OAr = oMP (2), DMP (3), oPP (4)], [Li(DIP)(THF)]3 (5), [Li(oBP)(THF)2]2, (6), and [Li(DBP)(THF)]2, (7). The tetranuclear species (1-4) consist of symmetric cubes of alternating tetrahedral Li and pyramidal O atoms, with terminal THF solvent molecules bound to each metal center. The trinuclear species 5 consists of a six-membered ring of alternating trigonal planar Li and bridging O atoms, with one THF solvent molecule bound to each metal center. Compound 6 possesses two Li atoms that adopt tetrahedral geometries involving two bridging oBP and two terminal THF ligands. The structure of 7 was identical to the previously reported [Li(DBP)(THF)]2 species, but different unit cell parameters were observed. Compound 7 varies from 6 in that only one solvent molecule is bound to each Li metal center of 7 because of the steric bulk of the DBP ligand. In contrast to the structurally diverse THF adducts, when py was used as the solvent, the appropriate "Li(OAr)(py)x" complexes were isolated as [Li(OAr)(py)2]2 (OAr = OPh (8), oMP (9), DMP (10), oPP (11), DIP (12), oBP (13)) and [Li(DBP)(py)]2 (14). Compounds 8-13 adopt a dinuclear, edge-shared tetrahedral complex. For 14, because of the steric crowding of the DBP ligand, only one py is coordinated, yielding a dinuclear fused trigonal planar arrangement. Two additional structure types were also characterized for the DIP ligand: [Li(DIP)(H-DIP)(py)]2 (12b) and [Li2(DIP)2(py)3] (12c). Multinuclear (6,7Li and 13C) solid-state MAS NMR spectroscopic studies indicate that the bulk powder possesses several Li environments for "transitional ligands" of the THF complexes; however, the py adducts possess only one Li environment, which is consistent with the solid-state structures. Solution NMR studies indicate that "transitional" compounds of the THF precursors display multiple species in solution whereas the py adducts display only one lithium environment.     

Synthesis of group 1 metal 2,6-diphenylphenoxide complexes [M(OC6H3Ph2-2,6)] (M = Li,Na, K,Rb, Cs) and structures of the solvent-free complexes [Rb(OC6H3Ph2-2,6)]x and [Cs(OC6H3Ph2-2,6)x: one-dimensional extended arrays of metal aryloxides

Reaction of 2,6-diphenylphenol (HOC(6)H(3)Ph(2)-2,6) with (n)BuLi, NaH, KH, or Rb or Cs metal in benzene gives the solvent-free complexes [M(OAr)]x in excellent yield. The complex [Rb(OC(6)H(3)Ph(2)-2,6)](x)() exhibits a ladderlike structure in the solid state with triply bridging oxygen atoms and Rb-O distances of 2.743(3), 2.930(2), and 2.973(2) A. The Rb cations interact with the pi-electron cloud of the arene moieties, giving rise to a high Rb coordination number. The cesium-containing congener forms a layered, columnlike structure consisting of [Cs(2)(mu(2)-OAr)(2)] units, with nearly identical Cs-O distances of 2.945(2) and 2.947(2) A. The individual layers are held together solely by Cs-arene pi-interactions.     

203,205Tl NMR studies of crystallographically characterized thallium alkoxides. X-ray Structures of [TI(OCH2CMe3)]4 and [TI(OAr)]infinity, where OAr = OC6H3(Me)2-2,6 and OC6H3(CHMe2)2-2,6

[Tl(OCH2Me)]4 (1) was reacted with excess HOR to prepare a series of [Tl(OR)]n, where OR = OCHMe2 (2, n = 4), OCMe3 (3, n = 4), OCH2CMe3 (4, n = 4), OC6H3(Me)2-2,6 (5, n = infinity), and OC6H3(CHMe2)2-2,6 (6, n = infinity). Single-crystal X-ray diffraction experiments revealed that in the solid state the alkoxide-ligated compound 4 adopts a cubane structure, whereas the aryloxide derivatives, 5 and 6, formed polymeric chains. Compounds 1-6 were also characterized by 203,205Tl solution and 205Tl solid-state NMR spectroscopy. In solution it was determined that 1-4 retained the [Tl-O]4 cube structure, whereas the polymeric species 5 and 6 appeared to be fluxional. Variations in the solution and solid-state structures for the [Tl(OR)]4 cubes and polymeric [Tl(OAr)]infinity are influenced by the steric hindrance of the ligand. The acidity of the parent alcohol influences the degree of covalency at the Tl metal center, which is reflected in the 203,205Tl chemical shifts for 1-6.     

Characterization of the sterically encumbered terphenyl-substituted species 2,6-Trip2H3C6Sn-Sn(Me)2C6H3-2,6-Trip2, an unsymmetric, group 14 element, methylmethylene, valence isomer of an alkene, its related lithium derivative 2,6-Trip2H3C6(Me)2Sn-Sn(Li)(Me)C6H3-2,6-Trip2, and the monomer Sn(t-Bu)C6H3-2,6-Trip2 (Trip = C6H2-2,4,6-i-Pr3)

The reaction of the recently reported sterically encumbered terphenyl tin(II) halide species Sn(Cl)C6H3-2,6-Trip2 (Trip = C6H2-2,4,6-i-Pr3), 1, with 1 equiv of MeLi or MeMgBr afforded 2,6-Trip2H3C6Sn-Sn(Me)2C6H3-2,6-Trip2, 2, which is the first stable group 14 element methylmethylene (i.e., CH3CH) analogue of ethylene (H2CCH2). Reaction of 1 with 1.5 equiv of MeLi yielded the stannylstannate species 2,6-Trip2H3C6(Me)2Sn-Sn(Li)(Me)-C6H3-2,6-Trip2, 3, whereas reaction of 1 with 1 equiv of t-BuLi gave the heteroleptic stannanediyl monomer Sn(t-Bu)C6H3-2,6-Trip2 (4). The compounds 2-4 were characterized by 1H, 13C (7Li, 3 only), and 119Sn NMR spectroscopy in solution and by UV-vis spectroscopy. The X-ray crystal structures of 2-4 were also determined. The formation of the stannylstannanediyl 2 instead of the expected symmetrical, valence isomer "distannene" form (Sn(Me)C6H3-2,6-Trip2)2, 6, is explained through the ready formation of LiSn(Me)2C6H3-2,6-Trip2, 5, which reacts rapidly with 1 to produce 2 which can then react with a further equivalent of MeLi to give 3. The stability of singly bonded 2 in relation to the formally doubly bonded 6 was rationalized on the basis of the difference in the strength of their tin-tin bonds. In contrast to the methyl derivatives, the reaction of 1 with t-BuLi proceeded smoothly to give the monomeric compound 4. Apparently, the formation of a t-Bu analogue of 5 was prevented by the more crowding t-Bu group. Compound 2 is also the first example of a stable molecule with bonding between a two-coordinate, bivalent tin and four-coordinate tetravalent tin. Both compounds 2 and 3 display large J 119Sn-119Sn couplings between their tin nuclei and the tin-tin bond lengths in 2 (2.8909(2) A) and 3 (2.8508(4) A) are relatively normal despite the presence of the sterically crowding terphenyl substituents.     

六氢吡啶和氨形成的氢键团簇C5H10NH(NH3)n(n=1～3)结构的从头算研究

在RHF/6-31G(d)水平下,对C5H10NH(NH3)n(n=1～3)氢键团簇的平衡构型进行了从头算研究,优化得到各种可能的平衡构型.C5H10NH(NH3)为线型氢键结构,而C5H10NH(NH3)2为三元环结构,C5H10NH(NH3)3为四元环结构.在MP2/6-31G(d)//B3LYP/6-31G(d)水平下,对最稳定构型C5H10NH(NH3)n(Ⅰ)(n=1～3)的分子轨道进行布居分析,并且对相应的占据轨道进行指认.C5H10NH(NH3)n(Ⅰ)(n=1～3)垂直电离势的计算结果表明,形成氢键团簇后,分子的垂直电离势降低.     

Neutrale Thiolate und ein Iodidthiolat von Antimon(III). Die Kristallstrukturen von Sb(SC6H5)3, Sb(SC6H2Me3-2,4,6)3 und SbI(SC6H2Me3-2,4,6)2

Neutral Thiolates and a Iodothiolate of Antimony(III). Crystal Structures of Sb(SC₆H₅)₃, Sb(SC₆H₂Me₃-2,4,6)₃, and SbI(SC₆H₂Me₃-2,4,6)₂ The crystal structures of Sb(SC₆H₅)₃ ( 1 ), Sb(SC₆ · H₂Me₃-2,4,6)₃ ( 2 ), and the novel compound SbI(SC₆H₂Me₃-2,4,6)₂ ( 3 ) have been determined by X-ray crystallography. In addition to the expected trigonal pyramidal coordination of antimony intermolecular interactions are observed for 1 (Sb … O: 363.3 pm) and 3 (Sb … S: 2 × 369.4 pm) but not for 2 . The reasons for these differences are discussed.     

Fluorine for hydrogen exchange in the hydrofluorobenzene derivatives C6H(x)F(6-x), where x = 2, 3, 4 and 5 by monomeric [1,2,4-(Me3C)3C5H2]2CeH: the solid state isomerization of [1,2,4-(Me3C)3C5H2]2Ce(2,3,4,5-C6HF4) to [1,2,4-(Me3C)3C5H2]2Ce(2,3,4,6-C6HF4)

The reaction between monomeric bis(1,2,4-tri-tert-butylcyclopentadienyl)cerium hydride, Cp'2CeH, and several hydrofluorobenzene derivatives is described. The aryl derivatives that are the primary products, Cp'2Ce(C6H(5-x)F(x)) where x = 1,2,3,4, are thermally stable enough to be isolated in only two cases, since all of them decompose at different rates to Cp'2CeF and a fluorobenzyne; the latter is trapped by either solvent when C6D6 is used or by a Cp'H ring when C6D12 is the solvent. The trapped products are identified by GC/MS analysis after hydrolysis. The aryl derivatives are generated cleanly by reaction of the metallacycle, Cp'((Me3C)2C5H2C(Me2)CH2)Ce, with a hydrofluorobenzene, and the resulting arylcerium products, in each case, are identified by their (1)H and (19)F NMR spectra at 20 degrees C. The stereochemical principle that evolves from these studies is that the thermodynamic isomer is the one in which the CeC bond is flanked by two ortho-CF bonds. This orientation is suggested to arise from the negative charge that is localized on the ipso-carbon atom due to C(o)(delta+)F(o)(delta-) polarization. The preferred regioisomer is determined by thermodynamic rather than kinetic effects; this is illustrated by the quantitative, irreversible solid-state conversion at 25 degrees C over two months of Cp'2Ce(2,3,4,5-C6HF4) to Cp'2Ce(2,3,4,6-C6HF4), an isomerization that involves a CeC(ipso) for C(ortho)F site exchange.     

Structure and bonding in cyclic isomers of B2AlH(n)(m) (n = 3-6, m = -2 to +1): a comparative study with B3H(n)(m), BAl2H(n)(m) and Al3H(n)(m)

The structure, bonding and energetics of B(2)AlH(n)(m) (n = 3-6, m = -2 to +1) are compared with corresponding homocyclic boron, aluminum analogues and BAl(2)H(n)(m) using density functional theory (DFT). Divalent to hexacoordinated boron and aluminum atoms are found in these species. The geometrical and bonding pattern in B(2)AlH(4)(-) is similar to that for B(2)SiH(4). Species with lone pairs on the divalent boron and aluminum atoms are found to be minima on the potential energy surface of B(2)AlH(3)(2-). A dramatic structural diversity is observed in going from B(3)H(n)(m) to B(2)AlH(n)(m), BAl(2)H(n)(m) and Al(3)H(n)(m) and this is attributable to the preference of lower coordination on aluminum, higher coordination on boron and the higher multicenter bonding capability of boron. The most stable structures of B(3)H(6)(+), B(2)AlH(5) and BAl(2)H(4)(-) and the trihydrogen bridged structure of Al(3)H(3)(2-) show an isostructural relationship, indicating the isolobal analogy between trivalent boron and divalent aluminum anion.     

Photoelectron spectroscopic study of the hydrated nucleoside anions: Uridine(-)(H(2)O)(n=0-2), cytidine(-)(H(2)O)(n=0-2), and thymidine(-)(H(2)O)(n=0,1)

The hydrated nucleoside anions, uridine(-)(H(2)O)(n=0-2), cytidine(-)(H(2)O)(n=0-2), and thymidine(-)(H(2)O)(n=0,1), have been prepared in beams and studied by anion photoelectron spectroscopy in order to investigate the effects of a microhydrated environment on parent nucleoside anions. Vertical detachment energies (VDEs) were measured for all eight anions, and from these, estimates were made for five sequential anion hydration energies. Excellent agreement was found between our measured VDE value for thymidine(-)(H(2)O)(1) and its calculated value in the companion article by S. Kim and H. F. Schaefer III.     

New Organophosphorus Proligands and Amide Precursors: Crystal and Molecular Structures of Ph2P(X)NH(C6H3Pri 2-2,6) (X = O,S) and (OPPh2)(O2SMe)N(C6H3Pri 2-2,6)

The new organophosphorus proligand (OPPh₂)(O₂SMe)NR (R = C₆H₃Prⁱ ₂–2,6) (3) was prepared as a white crystalline solid by reacting the lithiated compound Li[Ph₂P(O)NR] with MeSO₂Cl in a 1:1 molar ratio. The precursor Ph₂P(O)NHR (1), as well as its thio analogue Ph₂P(S)NHR (2), were obtained in the reaction between the lithiated amine RNHLi and the corresponding organophosphorus chloride. All compounds were characterized by multinuclear (¹H, ¹³C, and ³¹P) NMR spectroscopy. The molecular structures of 1–3 were established by single-crystal X-ray diffraction. A zigzag polymeric chain is formed in the crystals of 1 and 2 by hydrogen N–H···X (X = O, S) bonding, while the crystal of 3 contains discrete monomeric units with a syn–syn conformation of the O?P(C)₂–N–S(C)(?O)₂ skeleton.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

New rac‐XP(O)(OC6H5)(NHC6H4‐p‐CH3) [X = N(CH3)(cyclo‐C6H11) and NH(C3H5)] and rac‐(C6H5CH2NH)P(O)(OC6H5)(NH‐cyclo‐C6H11) mixed‐amide phosphinates

The mixed‐amide phosphinates, rac‐phenyl (N‐methylcyclohexylamido)(p‐tolylamido)phosphinate, C₂₀H₂₇N₂O₂P, (I), and rac‐phenyl (allylamido)(p‐tolylamido)phosphinate, C₁₆H₁₉N₂O₂P, (II), were synthesized from the racemic phosphorus–chlorine compound (R,S)‐(Cl)P(O)(OC₆H₅)(NHC₆H₄‐p‐CH₃). Furthermore, the phosphorus–chlorine compound ClP(O)(OC₆H₅)(NH‐cyclo‐C₆H₁₁) was synthesized for the first time and used for the synthesis of rac‐phenyl (benzylamido)(cyclohexylamido)phosphinate, C₁₉H₂₅N₂O₂P, (III). The strategies for the synthesis of racemic mixed‐amide phosphinates are discussed. The P atom in each compound is in a distorted tetrahedral (N¹)P(=O)(O)(N²) environment. In (I) and (II), the p‐tolylamido substituent makes a longer P—N bond than those involving the N‐methylcyclohexylamido and allylamido substituents. In (III), the differences between the P—N bond lengths involving the cyclohexylamido and benzylamido substituents are not significant. In all three structures, the phosphoryl O atom takes part with the N—H unit in hydrogen‐bonding interactions, viz. an N—H...O=P hydrogen bond for (I) and (N—H)(N—H)...O=P hydrogen bonds for (II) and (III), building linear arrangements along [001] for (I) and along [010] for (III), and a ladder arrangement along [100] for (II).     

Ruthenium(II) complexes containing 8-(dimethylphosphino)quinoline (Me(2)Pqn): preparation,crystal structures,and electrochemical and spectroscopic properties of [Ru(bpy or phen)(3)(-)(n)(Me(2)Pqn)(n)](PF(6))(2) (bpy = 2,2'-bipyridine; phen = 1,10-phenanthroline; n = 1, 2, or 3)

Several new ruthenium(II) complexes containing 8-(dimethylphosphino)quinoline (Me(2)Pqn) were synthesized, and their structures and electrochemical/spectroscopic properties have been investigated. In addition to the mono(Me(2)Pqn) complex [Ru(bpy or phen)(2)(Me(2)Pqn)](PF(6))(2) (1 or 1'; bpy = 2,2'-bipyridine; phen = 1,10-phenanthroline), the geometrical isomers trans(P)- and C(1)-[Ru(bpy)(Me(2)Pqn)(2)](PF(6))(2) (tP-2 and C(1)-2) and mer- and fac-[Ru(Me(2)Pqn)(3)](PF(6))(2) (m-3 and f-3) were also selectively synthesized and isolated. It was found that complexes tP-2 and m-3 were converted quantitatively to the corresponding C(1)-2 and f-3 isomers, respectively, by irradiation of light corresponding to the MLCT transition energy. The strong trans influence of the Me(2)P- donor group of Me(2)Pqn was confirmed by the X-ray structural analyses for 1, tP-2, m-3, and f-3. Cyclic voltammetry of a series of complexes, [Ru(bpy)(3)](PF(6))(2), 1, C(1)-2, and f-3, exhibited a reversible one-electron oxidation wave and two or three one-electron reduction waves. The oxidation potentials of the complexes gave a large positive shift with increasing number of coordinated Me(2)Pqn molecules, indicating a larger pi-acceptability of the Me(2)P- group compared with bpy or qn. Complex f-3 in EtOH/MeOH (4:1) glass at 77 K exhibited an intense long-lived (tau = 920 microseconds) emission arising from the quinoline-based (3)(pi-pi) excited state. In contrast, the mixed-ligand complexes 1, 1', and C(1)-2 showed a characteristic dual emission, giving a double-exponential emission decay, and the dual emission originates from both the bpy-based (3)MLCT and the quinoline-based (3)(pi-pi) emitting states.     

The "diindene" ArInInAr (Ar = C(6)H(3)-2,6-Dipp(2), Dipp = C(6)H(3)-2,6-Pr(i)(2)). Dimeric versus monomeric in(I) aryls: para-substituent effects in terphenyl ligands

The synthesis and structure of a "diindene" with significant metal-metal bonding are described. It has an In-In distance of 2.9786(5) A, an In-In-C angle of 121.23(6) degrees , and an In-In bond order that is probably less than unity.     

Photoelectron imaging of Ag(-)(H2O)x and AgOH(-)(H2O)y (x=1,2, y=0-4)

The photoelectron images of Ag(-)(H(2)O)(x) (x=1,2) and AgOH(-)(H(2)O)(y) (y=0-4) are reported. The Ag(-)(H(2)O)(1,2) anionic complexes have similar characteristics to the other two coinage metal-water complexes that can be characterized as metal atomic anion solvated by water molecules with the electron mainly localized on the metal. The vibrationally well-resolved photoelectron spectrum allows the adiabatic detachment energy (ADE) and vertical detachment energy (VDE) of AgOH(-) to be determined as 1.18(2) and 1.24(2) eV, respectively. The AgOH(-) anion interacts more strongly with water molecules than the Ag(-) anion. The photoelectron spectra of Ag(-)(H(2)O)(x) and AgOH(-)(H(2)O)(y) show a gradual increase in ADE and VDE with increasing x and y due to the solvent stabilization.     

Ab initio molecular orbital investigation of the amine-alanes (CH(3))(n)H(3)(-)(n)AlNX(3) and phosphane-alanes (CH(3))(n)H(3)(-)(n)AlPX(3) (X = H, F, and Cl; n = 0-3) complexes

We report on ab initio calculations at the G2(MP2) level of the structures and Al-N(P) bond complexation energies of the (CH(3))(n)H(3)(-)(n)AlNX(3) and (CH(3))(n)H(3)(-)(n)()AlPX(3) (X = H, F, and Cl; n = 0-3) donor-acceptor complexes. For the (CH(3))(3)AlNX(3) and (CH(3))(3)AlPX(3) complexes, the C(3)(v) symmetry is found to be favored, and for the other complexes the C(s) symmetry is found to be favored. The G2(MP2) calculated complexation energies show for the amine ligands the trend NH(3) > NCl(3) > NF(3). A similar trend PH(3) approximately PCl(3) > PF(3) is predicted for the phosphane ligands. The NBO partitioning scheme shows that there is no correlation between the stability and the charge transfer.     

A monomeric thallium(I) amide in the solid state: synthesis and structure of TlN(Me)ArMes2 (ArMes2 = C6H3-2,6-Mes2)

Reaction of TlCl and [LiN(Me)Ar(Mes)2](2) [Ar(Mes)2 = C(6)H(3)-2,6-(C(6)H(2)-2,4,6-Me(3))(2)] in Et(2)O generated the thallium amide, TlN(Me)Ar(Mes)2 (1). X-ray data showed that it has a monomeric structure with an average Tl-N distance of 2.364(3) Angstroms. There was also a Tl-arene approach [Tl-centroid = 3.026(2) Angstroms (avg)] to a flanking mesityl ring from the terphenyl substituent. DFT calculations showed that this interaction is weak and supported essentially one coordination for thallium. The electronic spectrum of 1 is hypsochromically shifted in comparison to the monomeric TlAr(Trip)2 (Trip = C(6)H(2)-2,4,6-Pr(i)(3)).     

Preparation and properties of the aqua ions [W(4)S(4)(H(2)O)(12)](n+) (n = 5, 6) and crystal structure of (Me(2)NH(2))(6)[W(4)S(4)(NCS)(12)].0.5H(2)O

The [3 + 1] reaction of [W(3)S(4)(H(2)O)(9)](4+) with [W(CO)(6)] in 2 M HCl under hydrothermal conditions (130 degrees C) gives the [W(4)S(4)(H(2)O)(12)](6+) cuboidal cluster, reduction potential 35 mV vs NHE (6+/5+ couple). The reduced form is obtained by controlled potential electrolysis. X-ray crystal structure was determined for (Me(2)NH(2))(6)[W(4)S(4)(NCS)(12)].0.5H(2)O. The W-W and W-S bond lengths are 2.840 and 2.379 A, respectively.     

Tin-capped trinuclear nickel clusters: redox isomerism between micro(3)-stannyl and micro(3)-stannylene clusters of the class [Ni(3)(dppm)(3)(micro3-I)(micro3-SnCl(x)](n+) (x = 2, n = 1; x = 3, n = 0)

The reaction of Ni(3)(dppm)(3)(micro(3)-I)(2)) with sodium trichlorostannate affords the first tin-capped nickel cluster Ni(3)(dppm)(3)(micro(3)-I)(micro(3)-SnCl(3) (1). A site of coordinative unsaturation at tin can be introduced by the reaction of 1 with Tl[PF(6)] yielding the stannylene-capped cluster [Ni(3)(dppm)(3)(micro(3)-I)(micro(3)-SnCl(2)](+) (2). Clusters 1 and 2 were characterized by 31P NMR, X-ray diffraction, and cyclic voltammetry (CV). Clusters 1 and 2 exhibit single electron redox chemistries, [Ni(3)(dppm)(3)(micro(3)-I)(micro(3)-SnCl3](0/*-), [Ni(3)(dppm)(3)(micro(3)-I)(micro(3)-SnCl(2)](+/0), that together comprise a redox equilibrium. Thus, electrochemical reduction of 1 produces first the 49e- cluster radical anion [Ni(3)(dppm)(3)(micro(3)-I)(micro(3)-SnCl(3)](*-) which then yields the reduced form of 2, [Ni(3)(dppm)(3)(micro(3)-I)(micro(3)-SnCl(2)], upon chloride dissociation.