DSC study of cure kinetics of DGEBA-based epoxy resin with poly(oxypropylene) diamine

Summary A kinetic study of cure kinetics of epoxy resin based on a diglycidyl ether of bisphenol A (DGEBA), with poly(oxypropylene) diamine (Jeffamine D230) as a curing agent, was performed by means of differential scanning calorimetry (DSC). Isothermal and dynamic DSC characterizations of stoichiometric and sub-stoichiometric mixtures were performed. The kinetics of cure was described successfully by empirical models in wide temperature range. System with sub-stoichiometric content of amine showed evidence of two separate reactions, second of which was presumed to be etherification reaction. Catalytic influence of hydroxyl groups formed by epoxy-amine addition was determined.     

Study of cure kinetics of epoxy/DDS/nanosized (SiO2/TiO2) system by dynamic differential scanning calorimetry

In this study the curing kinetics of epoxy based on the diglycidyl ether of bisphenol A (DGEBA), 4,4′‐diaminodiphenyl sulfone (DDS) as a hardener, and SiO₂/TiO₂ (70:30) as a nanofiller was investigated by nonisothermal differential scanning calorimetry (DSC). The effects of different weight contents of SiO₂/TiO₂ nanoparticles were studied using DSC in Dynamic Mode and the best value of the nanofiller was found to be 5 phr (parts per hundred). Dynamic measurements were used to obtain the total heat of reaction of the epoxy system as well as its activation energy (E_a) based on the isoconversional methods of Kissinger and Ozawa. The process revealed a dependence of the activation energy on conversion (α). The morphology of the cured system was investigated by scanning electron microscopy (SEM). It showed a strong cross‐linking between the resin and hardner and a relatively better dispersion of surface modified filler nanoparticles. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermal explosion and runaway reaction simulation of lauroyl peroxide by DSC tests

Lauroyl peroxide (LPO) is a typical organic peroxide that has caused many thermal runaway reactions and explosions. Differential scanning calorimetry (DSC) was employed to determine the fundamental thermokinetic parameters that involved exothermic onset temperature (T₀), heat of decomposition (ΔH_d), and other safety parameters for loss prevention of runaway reactions and thermal explosions. Frequency factor (A) and activation energy (E_a) were calculated by Kissinger model, Ozawa equation, and thermal safety software (TSS) series via DSC experimental data. Liquid thermal explosion (LTE) by TSS was employed to simulate the thermal explosion development for various types of storage tank. In view of loss prevention, calorimetric application and model analysis to integrate thermal hazard development were necessary and useful for inherently safer design.     

DSC and FTIR Analyses of The Curing Behavior of Epoxy/dicy/solvent Systems on Hermetic Specimens

The curing characteristics of adicyandiamide-cured epoxy system under the influence of solvents in a closed environment were studied by means of isothermal differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The DSC analyses revealed that the presence of solvent results in decreases in the curing exotherm, the initial curing rate, the glass transition temperature, the reaction rate and the reaction order of the epoxy resin. The greatest decreases were caused by the solvent with the highest boiling temperature. A change in temperature-dependent curing route due to the heat absorbed during solvent evaporation is responsible for the difference. The FTIR analyses confirmed that the composition of the cured resin is affected by the solvent, the curing temperature and the specimen configuration. As compared with those obtained from open systems, specimens produced in a closed environment have an enhanced curing exotherm, initial curing rate, glass transition temperature, reaction rate and reaction order because of the retention of volatile catalytic by-products. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cure kinetics of carbon nanotube/tetrafunctional epoxy nanocomposites by isothermal differential scanning calorimetry

The cure kinetics of tetraglycidyl‐4,4′‐diaminodiphenylmethane (TGDDM) and 4,4′‐diaminodiphenylsulfone (DDS) as a cure agent in nanocomposites with multiwalled carbon nanotubes (MWNTs) have been studied with an isothermal differential scanning calorimetry (DSC) technique. The experimental data for both the neat TGDDM/DDS system and for epoxy/MWNTs nanocomposites showed an autocatalytic behavior. Kinetic analysis was performed with the phenomenological model of Kamal and a diffusion control function was introduced to describe the cure reaction in the later stage. Activation energies and kinetic parameters were determined by fitting experimental data. For MWNTs/epoxy nanocomposites, the initial reaction rates increased and the time to the maximum rate decreased with increasing MWNTs contents because of the acceleration effect of MWNTs. The values of the activation energies for the epoxy/MWNTs nanocomposites were lower than the values for the neat epoxy in the initial stage of the reaction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3701–3712, 2004     

Determination of charge density of anionic polyacrylamide flocculants by NMR and DSC

New methods are suggested for the determination of the charge density of acrylamide/acrylate copolymers.¹³C nuclear magnetic resonance spectroscopy was used to determine the comonomer ratio by comparing the peak intensities of the methine carbon in acrylamide and acrylate monomers. Results were compared with those obtained by conductometric and potentiometric titration and were found to be in good agreement. Differential scanning calorimetry was employed to determine the glass transition temperatures (T _g) of the copolymers. A master curve was established by plottingT _g versus charge density of the copolymers previously determined by NMR and conductometric titration. Compositions of poly(acrylamide-co-acrylate) samples can thus be determined by measuring theT _g and reading the percent composition directly from the master curve.     

Antibacterial mechanism of houttuyfonate homologues against Bacillus subtilis

In this study the effects of houttuyfonate homologues (HOU-C_n) on the surface and shape, the lipid fluidity and the protein conformation, the fatty acid compositions and fatty acid synthase II (FAS II) of B. subtilis were studied to elucidate the antibacterial mechanism of HOU-C_n against Bacillus subtilis. The scanning electronic microscope (SEM) results showed that the glycocalyx on the surface of B. subtilis disappeared and the cell became smaller after being treated with HOU-C_n. During the co-incubation of HOU-C_n and B. subtilis, HOU-C_n was decomposed into alkyl acyl aldehyde and sodium sulfite rapidly. Then alkyl acyl aldehyde was congregated onto cell membrane and inserted into lipid bilayer, further increased the fluidity of membrane and changed the conformation of membrane protein by hydrophobic binding. Subsequently, HOU-C_n inhibited the FAS II activity, and decreased the synthesis of fatty acids, especially increased the percentage of saturated fatty acid. HOU-C_n showed a strong antibacterial activity against G⁺-bacteria by a multi-target antibacterial mechanism.     

Thermal hazard evaluation of carbon nanotubes with sulfuric acid by DSC

Many concerns over unsafe or unknown properties of multi-walled carbon nanotubes (MWNTs) have been raised. The thermal characteristics regarding stability would represent potential hazards during the production or utilization stage and could be determined by calorimetric tests for various thermokinetic parameters. Differential scanning calorimetry (DSC) was employed to evaluate the thermokinetic parameters for MWNTs at various compositions. Thermoanalytical curves showed that the average heat of decomposition (ΔH _d) of the MWNTs samples in a manufacturing process was about 31,723 J g⁻¹, by identifying them as an inherently hazardous material. In this study, significant thermal analysis appeared in the presence of sulfuric acid (H₂SO₄). From the DSC experiments, the purification process of MWNTs could induce an unexpected reaction in the condition of batch addition with reactants of H₂SO₄. The results can be applied for designing emergency relief system and emergency rescue strategies during a perturbed situation or accident.     

Curing kinetics of the epoxy system diglycidyl ether of bisphenol A/isophoronediamine by Fourier transform infrared spectroscopy

The curing reaction of an epoxy system consisting of a diglycidyl ether of bisphenol A (BADGE, n = 0) and isophoronediamine (IPD), was studied by Fourier transform infrared spectroscopy (FTIR). The degree of conversions and the reaction rates at different isothermal curing temperatures were calculated from the infrared spectra using a method derived from Beer's law. This method is based on the ratio of the height of the characteristic absorbance peak to reference absorbance peak. A kinetic model proposed by Sourour and Kamal has been used to fit experimental data. Copyright © 2008 John Wiley & Sons, Ltd.     

A thermoreversible double gel: characterization of a methylcellulose and kappa-carrageenan mixed system in water by SAXS, DSC and rheology

Sol-gel and gel-sol thermal transition of methylcellulose/water, kappa-carrageenan/water and methylcellulose/kappa-carrageenan/water mixtures was investigated utilizing small-angle X-ray scattering (SAXS), differential scanning calorimetry (DSC) and oscillatory rheological experiments in temperature regime from 20 to 80 degrees C. Methylcellulose (E461) and kappa-carrageenan (E407) are well-known additives used for gelation in various nutrition and other products. The formulation and characterization of a mixed thermoreversible methylcellulose/kappa-carrageenan/water gel with very interesting double thermal transition gel-sol-gel upon heating was possible. This specific thermal behavior provides a liquid state of the system between the low-temperature and high-temperature gel-state and at the same time allows for the easy temperature tuning of the system's state. As such this system is suggested to be further tested as potential carrier for various functional colloidal systems.     

Miscibility and crystallization behavior of PBT/epoxy blends

The miscibility and the isothermal crystallization kinetics for PBT/Epoxy blends have been studied by using differential scanning calorimetry, and several kinetic analyses have been used to describe the crystallization process. The Avrami exponents n were obtained for PBT/Epoxy blends. An addition of small amount of epoxy resin (3%) leads to an increase in the number of effective nuclei, thus resulting in an increase in crystallization rate and a stronger trend of instantaneous three‐dimensional growth. For isothermal crystallization, crystallization parameter analysis showed that epoxy particles could act as effective nucleating agents, accelerating the crystallization of PBT component in the PBT/Epoxy blends. The Lauritzen–Hoffman equation for DSC isothermal crystallization data revealed that PBT/Epoxy 97/3 had lower nucleation constant K_g than 100/0, 93/7, and 90/10 PBT/Epoxy blends. Analysis of the crystallization data of PBT/Epoxy blends showed that crystallization occurs in regime II. The fold surface free energy, σ_e = 101.7–58.0 × 10^?3 J/m², and work of chain folding, q = 5.79–3.30 kcal/mol, were determined. The equilibrium melting point depressions of PBT/Epoxy blends were observed and the Flory–Huggins interaction parameters were obtained. It indicated that these blends were thermodynamically miscible in the melt. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1320–1330, 2006     

The thermal decomposition of N , N -dimethyl-3-oxaglutaramic acid and the kinetics of its second-stage thermal decomposition reaction

N,N-dimethyl-3-oxa-glutaramic acid was purified and characterized by ¹H-NMR, Fourier transform infrared spectroscopy (FT-IR) and elemental analysis. The thermal decomposition of the title compound was studied by means of thermogravimetry differential thermogravimetry (TG-DTG) and FT-IR. The kinetic parameters of its second-stage decomposition reaction were calculated and the decomposition mechanism was discussed. The kinetic model function in a differential form, apparent activation energy and pre-exponential constant of the reaction are 3/2 [(1−α)^1/3−1]⁻¹, 203.75 kJ·mol⁻¹ and 10^17.95s⁻¹, respectively. The values of ΔS ^≠, ΔH ^≠ and ΔG ^≠ of the reaction are 94.28 J·mol⁻¹·K⁻¹, 203.75 kJ·mol⁻¹ and 155.75 kJ·mol⁻¹, respectively. Supported by the National Natural Science Foundation of China (Grant No. 20106009)     

Isoconversional method to explore the cure reaction mechanisms and curing kinetics of DGEBA/EMI‐2,4/nano‐SiC system

The curing kinetics of the diglycidyl ether of bisphenol‐A (DGEBA)/2‐ethyl‐4‐methylimidazole (EMI‐2,4)/nano‐sized carborundum (nano‐SiC) system was studied by means of nonisothermal differential scanning calorimetry (DSC). An isoconversional method of kinetic analysis yields a dependence of the effective activation energy E on the extent of conversion that decreases initially, and then increases as the cure reaction proceeds. The variations of E were used to study the cure reaction mechanisms, and the Shrinking Core Model was used to study the resin–particle reaction. The results show that the presence of nano‐SiC particles prevents the occurrence of vitrification, as well as inhibits the cure reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 371–379, 2006     

The kinetics and mechanism of cyclodimerization of alkylthiopropenals

The kinetics of 2-alkylthiopropenals cyclodimerization was studied in the temperature range from -7 to +42 °C in heptane and at 20 °C in various solvents. The rate constants for cyclodimerization of 2-alkylthiopropenals are four orders of magnitude higher than those for dimerization of the oxygen-containing analogs, 2-alkoxypropenals, and are independent of the solvent polarity and substituent steric constant. The activation parameters for 2-butylthiopropenal cyclodimerization were estimated. The distribution of electron density in the 2-methoxy- and 2-methylthiopropenals molecules was calculated by the ab initio method. From comparison of the HOMO and LUMO energies for these aldehydes it was concluded that the ratio between the cyclodimerization rates for 2-alkylthio-, 2-ethoxypropenals, and propenal is determined by the HOMO–LUMO gap.     

Thermal properties and kinetics study of charged LiCoO2 by TG and C80 methods

The thermal stability of lithium-ion battery cathode could substantially affect the safety of lithium-ion battery. In order to disclose the decomposition kinetics of charged LiCoO₂ used in lithium ion batteries, thermogravimetric analyzer (TG) and C80 microcalorimeter were employed in this study. Four stages of mass losses were detected by TG and one main exothermic process was detected by C80 microcalorimeter for the charged LiCoO₂. The chemical reaction kinetics is supposed to fit by an Arrhenius law, and then the activation energy is calculated as E _a=148.87 and 88.87 kJ mol⁻¹ based on TG and C80 data, respectively.     

Studies on curing kinetics of a novel combined liquid crystalline epoxy containing tetramethylbiphenyl and aromatic ester‐type mesogenic group with diaminodiphenylsulfone

The curing kinetics of a novel liquid crystalline epoxy resin with combining biphenyl and aromatic ester‐type mesogenic unit, diglycidyl ether of 4,4′‐bis(4‐hydroxybenzoyloxy)‐3,3′,5,5′‐tetramethyl biphenyl (DGE‐BHBTMBP), and the curing agent diaminodiphenylsulfone (DDS) was studied using the advanced isoconvensional method (AICM). DGE‐BHBTMBP/DDS curing system was investigated the curing behavior by means of differential scanning calorimetry (DSC) during isothermal and nonisothermal processes. Only one exothermal peak appeared in isothermal DSC curves. A variation of the effective activation energy with the extent of conversion was obtained by AICM. Three different curing stages were confirmed. In the initial curing stage, the value of E_a is dramatically decreased from ～90 to ～20 kJ/mol in the conversion region 0–0.2 for the formation of LC phase. In the middle stage, the value of E_a keeps about ～80 kJ/mol for cooperative effect of reaction mechanism and diffusion control. In the final stage, a significant increase of E_a from 84 to 136 kJ/mol could be caused by the mobility of longer polymer chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3922–3928, 2007     

The effect of molecular weight on the crystallization kinetics and equilibrium melting temperature of poly(tetramethylene ether glycol)

Isothermal crystallization of poly(tetramethylene ether glycol) (PTMEG) with relatively low molecular weight (M_n = 991, 2004 and 2864, respectively) was investigated by differential scanning calorimetry, and the equilibrium melting temperature (T) determined using the Hoffman–Weeks analysis. The crystallization kinetics of PTMEG were characterized using an Avrami analysis. Mechanistic n values ranged from 2.2 to 2.9 for the primary crystallization process for three molecular weight grades, indicating heterogeneous nucleation of spherulites. Polarized light microscopy confirmed that PTMEG crystallized by the growth of spherulites from heterogeneous nuclei. The half–life for crystallization (t_1/2) and the composite rate constant were found to be dependent on the degree of supercooling (ΔT) and the molecular weight. Copyright © 2006 John Wiley & Sons, Ltd.     

Application of a detailed reaction mechanism to pyrolysis of Miscanthus giganteus

The objective of this contribution is to describe thermal degradation of Miscanthus giganteus by a detailed reaction mechanism. It includes degradation kinetics for cellulose, hemicellulose and lignin which constitute the major mass fractions of M. giganteus. Furthermore, the mechanism yields a detailed composition of product gases, and is therefore well-suited to predict evolution of both thermal decomposition and products. Therefore, the reaction mechanism was introduced to the Discrete Particle Method (DPM) that solves the coupled differential conservation equations for mass, momentum, species, and energy for a M. giganteus particle. Predicted results were compared to experimental data and yielded good agreement.     

Composition of products and mechanism of the reaction of ozone with 2,6-di(tert-butyl)-4-methylphenol

It was shown that two series of products with opening and with preservation of the aromatic nucleus are formed in the reaction of ozone with ionol, and a mechanism was proposed for the reaction.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117334 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 5, pp. 1203–1207, May, 1992.     

Electrode kinetics and thermodynamic study of complexes of palladium(II) at D.M.E.

Polarographic study of Pd(II) reveals that it reduces quasireversibly at d.m.e. in 0.2M-pyridine+0.1N-HCl medium. Kinetic parameters of Pd(II) in various concentrations of -resorcyclic acid were calculated usingGellings method and thus the effect of concentration of -resorcyclic acid on the kinetics of the reduction of Pd(II) has been explained.DeFord/Hume graphical extrapolation method and the mathematical method ofMihailov have been employed for the evaluation of overall formation constants of the complexes formed with -resorcyclic acid. The logarithmic values of overall formation constants ₁, ₂ and ₃ obtained by the two methods are 7.47, 8.60, 9.66 (DeFord andHume Method) and 7.44, 8.64, 9.66 (Mihailov Method) at 298 K. Thermodynamic parameters of these complexes are reported.

---

Elektrodenkinetik und thermodynamische Untersuchungen an Pd(II)-Komplexen mittels polarographie

Zusammenfassung Pd(II) zeigt eine quasireversible Reduktion in 0,2M-Pyridin/0,1N-HCl. Kinetische Parameter wurden mittels der Methode vonGelling ermittelt und damit der Effekt verschiedener -Resorcylsäurekonzentrationen erklärt. Bildungskonstanten der entsperechenden Komplexe wurden nachDeFord/Hume und nachMihailov ermittelt. Die logarithmischen Werte der Gesamtbildungskonstanten ₁, ₂ und ₃ bei 298 K betragen nach derDe Ford/Hume-Methode 7,47, 8,60 und 9,66, nach derMihailov-Methode 7,44. 8,64 und 9,66. Die thermodynamischen Parameter der Komplexbildung werden angegeben.