超短电子脉冲在聚焦强激光场中的三维有质动力散射

采用三维测试粒子模拟(test-padicle simulation)的方法，研究了聚焦的飞秒脉冲强激光与超短电子束进行有质动力的散射过程.详细讨论了超短电子束经过不同激光延迟下有质动力散射的空间分布特征和能谱特征.提出了通过测量电子束的空间分布和能谱分布实现对超短脉冲电子束的脉冲宽度测量的方法. 关键词： 有质动力散射 聚焦的飞激光 飞秒电子束     

斜抽运无机液体激光器的流场热分布

激光二极管斜抽运的多增益段串接的液体激光器能够明显地提高激光光束质量、获得较高的输出功率.针对斜抽运子增益段工作时所涉及的流动、传热和壁面耦合,建立了计算子增益段流场热分布的流-热-固耦合模型,应用有限单元法完成了其瞬态流场热分布的数值模拟.该方法排除了不精确的换热系数对计算结果的影响,使得换热系数不再是计算的先决条件,而只是计算结果之一,并且为评价流道形状、流速、吸收系数等因素对流场热的影响,以及进一步改进和控制液体激光介质的流场热分布,提供了可靠的分析方法.数值模拟研究表明:换热系数是空间位置的函数,     

Experimental investigation and numerical simulation of the spatio-temporal dynamics of nanosecond pulses in Q-switched Nd:YAG lasers

This paper reports on an experimental investigation and numerical simulation of the spatio-temporal dynamics of the pulse formation in flashlamp-pumped Q-switched Nd:YAG lasers. The temporal evolution of the spatial intensity distribution is measured with a fast two-dimensional CCD camera. The measurements are performed for two lasers with different cavity configurations. A laser with an optically stable resonator and an internal mode aperture generated pulses with a spatial intensity distribution which is Gaussian at all times during the 10-ns-long pulse. During the pulse evolution the value of the beam-quality factor M²remains below 1.3. In a laser with a positive-branch unstable resonator the laser pulse also starts with a Gaussian intensity distribution, but becomes rapidly non-Gaussian. The corresponding M²values increase from about 1 at the beginning of the formation of the pulse to more than 12 in the tail of the pulse. The measurements are compared with the results of a numerical simulation which takes the laser amplification, the properties of the laser cavity, and the diffraction of the beam in the laser cavity into account. The spatio-temporal dynamics of the pulse formation predicted by the numerical model are in good agreement with the experimental results.PACS 42.60.Jf     

Alternative fiber-optic backreflectance sensor for measurement of the effective focal lengths of optical elements and distances

An alternative and simple fiber-optic backreflectance sensor method for accurate measurement of either effective focal lengths of optical elements and short distances using a single-mode optical fiber and cw laser is presented. The method is based on the intensity sensing of focused backreflectance laser emission and the spatial location of three specific points: the focal point of the focusing optical element and two object points. The single-mode fiber is a key optical element and serves simultaneously as a point laser source for testing, an object for projecting and a highly sensitive point receiver of the focused backreflectance emission. The experimental and analytical results demonstrate the potential of the method for locating the spatial points and determining the effective focal length with accuracies exceeding 1 μm and 0.5%, respectively, as well as for short distance measurement with submicron accuracy.     

Detection of Internal Defects in Concrete and Evaluation of a Healthy Part of Concrete by Noncontact Acoustic Inspection Using Normalized Spectral Entropy and Normalized SSE

Non-destructive testing, with non-contact from a remote location, to detect and visualize internal defects in composite materials such as a concrete is desired. Therefore, a noncontact acoustic inspection method has been studied. In this method, the measurement surface is forced to vibrate by powerful aerial sound waves from a remote sound source, and the vibration state is measured by a laser Doppler vibrometer. The distribution of acoustic feature quantities (spectral entropy and vibrational energy ratio) is analyzed to statistically identify and evaluate healthy parts of concrete. If healthy parts in the measuring plane can be identified, the other part is considered to be internal defects or an abnormal measurement point. As a result, internal defects are detected. Spectral entropy (SE) was used to distinguish between defective parts and healthy parts. Furthermore, in order to distinguish between the resonance of a laser head and the resonance of the defective part of the concrete, spatial spectral entropy (SSE) was also used. SSE is an extension of the concept of SE to a two-dimensional measuring space. That is, based on the concept of SE, SSE is calculated, at each frequency, for spatial distribution of vibration velocity spectrum in the measuring plane. However, these two entropy values were used in unnormalized expressions. Therefore, although relative evaluation within the same measurement surface was possible, there was the issue that changes in the entropy value could not be evaluated in a unified manner in measurements under different conditions and environments. Therefore, this study verified whether it is possible to perform a unified evaluation for different defective parts of concrete specimen by using normalized SE and normalized SSE. From the experimental results using cavity defects and peeling defects, the detection and visualization of internal defects in concrete can be effectively carried out by the following two analysis methods. The first is using both the normalized SE and the evaluation of a healthy part of concrete. The second is the normalized SSE analysis that detects resonance frequency band of internal defects.     

Femtosecond laser induced defects in various silica glasses

The mechanism of near infrared (IR) focused femtosecond (fs) laser induced defects in silica glasses produced by different methods is systematically investigated through measurements of absorption,fluorescence, and electronic spin resonance (ESR) spectra. The influence of impurities and hydroxyl groups on defects is discussed. The results show that ES silica glasses containing high OH and few defects are much stable under fs laser irradiation. It is also verified that Si E'δ center formation has no direct relation with chloride ions.     

On the transverse distribution of a resonance field excited by a Gaussian electromagnetic beam on the critical surface of a radially nonuniform plasma sphere

The transverse distribution of the resonance field excited by a Gaussian electromagnetic field on the critical surface of a radially nonuniform plasma sphere is studied. Analytical expressions are obtained for this distribution. It is shown that when a laser beam is focused in front of or behind a spherical target, identical values of the integrated resonance coefficient can correspond to substantially different (in width) distributions of the resonance field over the spherical critical surface. Zh. Tekh. Fiz. 67, 125–128 (October 1997)     

一种测量大面积激光束光强分布的复合阵列

针对大面积高能激光束时空分布参数测量的需要,研究了量热和光电法综合测量激光束时空分布的方法。采用现场实时定标技术有效地解决了两类数据融合问题,研制了量热光电复合阵列测量系统。该复合阵列主要由256路量热探测单元、120路光电探测单元、多通道数据采集模块和数据分析处理模块等部分组成,具有量热型探头测量绝对激光能量准确、光电探测器测量时间分辨率高等优点,实现了大面积高能激光束光强分布时间和空间的绝对测量。     

Optical method for measuring structural parameters of island films

An optical method for determining characteristics of the submicron structure in island films is proposed. The method is based on the measurements of fluctuations of optical properties of a film detected when a focused laser beam is scanned over it. It is shown that the island size distribution can be determined in principle by the method proposed. Structural inhomogeneity of a Cs film on sapphire is revealed experimentally. Parameters of these inhomogeneities are measured as functions of the film thickness. The correspondence of the results of the optical method and the data of electron microscopy is tested for a In film on glass.     

A far-infrared laser magnetic resonance spectrometer for the investigation of radicals of atmospheric relevance

A far-infrared laser magnetic resonance spectrometer is described. A superconducting magnet is used for the tuning of the energy levels. Pressure broadening measurements of OH and NO have been performed. The measurements demonstrate that the laser magnetic resonance technique is well suited for this kind of measurements. Based on this results the design and expected performance of a compact laser magnetic resonance spectrometer is presented. The sensitivity as well as the mechanical ruggedness of this spectrometer is sufficient in order to be used aboard an aircraft for the in situ detection of OH and HO₂ in the lower stratosphere and upper troposphere.     

利用4400系统构造具有光学多道分析功能的信号处理系统

基于4400系统,通过引入光电二极管列阵作为传感器,构造了具有光学多道分析功能的信号处理系统。利用该系统对实际的激光空间分布进行了描绘,给出了高斯场分布的相应参数。通过进一步观测p偏振光在K9玻璃上下表面反射光强比(γ)的角度调制曲线,获得了玻璃表面层的光学参数。实验结果表明,该系统测量精度高,可应用在激光时间信号及空间场分布的表征与测量领域。     

Determination of nonlinear optical characteristics of transparent materials using single laser pulses

A new method of express analysis of nonlinear optical properties of materials by determining their nonlinear refraction and nonlinear absorption upon irradiation by a single laser pulse is proposed. The nonlinear optical characteristics of media are determined based on an analysis of variations in the spatial distribution of radiation focused by a cylindrical lens and passed through the medium. The method proposed is tested by the example of optical nonlinearities of CS₂.     

Visualization of the spatio-temporal structure of a pulsed photoelectron beam formed by femtosecond laser radiation

A method based on an original electron microscope created for investigating photoelectron beams is presented. It ensures a nanometer spatial resolution and picosecond time resolution. Electrons appearing when a metal needle is irradiated by femtosecond laser pulses are transmitted through a dielectric microcapillary and are subjected to a ponderomotive potential created by femtosecond laser radiation focused near the capillary tip. The position-sensitive detection scheme allows for the detection of the spatial profile of a photo-electron beam with a magnification of K ≅ 4 × 10⁴. The time structure of the photoelectron beam is visualized by scanning the delay time between laser pulses irradiating the needle and a laser pulse focused near the capillary tip.     

纳秒激光在K9玻璃中聚焦的损伤形貌研究

详细研究了纳秒激光脉冲在K9玻璃内部产生损伤的形貌特点.整个损伤形貌是前端较大、后端逐渐减小,呈纺锤形.损伤区可分为四种类型的损伤形貌：损伤点轴向的丝状等离子通道、熔化区域、裂纹区域和裂纹末端的折射率变化区域.给出了激光脉冲能量在空间的沉积函数和冲击波膨胀压强的表达式,并根据压强的空间分布特点对相应的损伤形貌进行了分析,理论分析与实验结果相符. 关键词： 激光损伤形貌 移动损伤模型 冲击波 激光能量沉积     

Simulating the processes of radiation propagation in the receiving–transmitting tracts of laser systems

The conditions for a topological wave-front disturbance are considered in regard to narrow focused laser beams with an initially dislocation-free spatial structure. The factors affecting the accuracy of determining the phase distribution in a beam’s cross section using a shearing interferometer are considered.     

Resonance ionization spectroscopy of radioisotopes at the IGISOL facility, JYFL

The method of resonance ionization spectroscopy for measurements of hyperfine structures and isotope shifts of heavy elements, at the IGISOL facility, Jyväskylä, is discussed. Two laser geometries are considered, with reference to the effect they have on resolution and efficiency of measurements. Results of off line resonance ionization tests on natural sodium are reported.     

超热电子输运背向光辐射的实验研究

在100TW掺钛蓝宝石飞秒激光器上利用光学CCD相机和光学多道分析仪,分别在靶背法线方向测量了超热电子光辐射的空间分布和光谱.测量结果显示：光辐射空间分布图案呈圆环状,而辐射区域有发散角和光强分布,且包含多种辐射成分.光辐射光谱在800nm附近出现尖峰,是激光的基频(ω₀)波,这一现象归因于超热电子束在输运的过程中产生的微束团而引起的相干渡越辐射(CTR).随着激光能量的增加,CTR光谱峰向红光方向移动,基频波红移的主要原因是由于等离子体临界面的迅速膨胀.如果考虑超热电 关键词： 超热电子 光辐射 共振吸收 红移     

Temperature distribution in the bright spot of the optical discharge in an optical fiber

2D simulation of the optical discharge propagation in an optical fiber is performed. In contrast to the previous works, the temperature dependences of the transfer coefficient are taken into account for the bright-spot plasma. The results are compared with the recently published measurements of the spatial distribution of the bright-spot radiation intensity. Good agreement is obtained for the discharge propagation velocity and the dependence of the bright-spot size on the laser power.     

热图法测量激光强度时空分布的重构理论研究

为了把量热法应用于远场激光强度时空分布测量,研究了基于热像仪靶面温度测量反演入射激光强度时空分布的重构理论。针对背光面两种不同边界条件(对流-辐射热流边界和恒定温度边界)推导出了由靶面温度分布反演激光束时空分布的重构表达式。获得的分析表达式对广泛的材料具有适用性。通过引入广义参量F0=α/L2,分别就F0》1和F0《1情况给出了重构近似表达式,并对满足F0》1条件的回推算法进行了数值模拟验证。数值结果表明,两种背光面边界条件下回推得到的激光束时空分布与原始激光束达到了很好的一致,但存在一与靶材傅里叶数相关的最小起始回推时间τ0。成果可用于强激光远场参量测量设备的研制。     

Experimental evaluation of the measurement of isotope ratios by time of flight mass spectrometry with laser ablation

Time of flight mass spectrometry (TOF-MS) in combination with laser ablation (LA) applied for low isotope composition measurements is limited by energy and spatial dispersion of ions, spatial charge density, and some other factors. In order to reduce these factors that make the extraction of the plasma ions difficult, we used a second laser to create ions by non-isotope-selective photoionization of neutral particles. The photoionization was carried out in uranium vapor beam by the third harmonic of a pulsed Nd:YAG laser. This work presents the results of tentative experiments to estimate the characteristics of the LA-TOF-MS method with non-selective photoionization.