Determination of nitrate in seawater by capillary zone electrophoresis with chloride-induced sample self-stacking

A capillary zone electrophoresis (CZE) method was established to determine low concentration nitrate which was online preconcentrated with chloride-induced leading-type sample self-stacking for seawater samples. The sample self-stacking was based on transient isotachophoresis in which chloride served as leading ion, and dihydrogenphosphate in the background electrolyte (0.1 M phosphate) as the terminating one. Due to the small mobility difference between nitrate and chloride, the isotachophoresis time was so long that nitrate could not separate from the rear sharp boundary between chloride and the background electrolyte (BGE) when it migrated to the detection window. A zwitterionic surfactant, 3-(N,N-dimethyldodecylammonio)propane sulfonate was added to the BGE to enlarge the mobility difference for its selective interaction with anions. Thus, a highly conductive sample could be injected in a large volume with about fourfold sensitivity enhancement compared to that of field amplification sample stacking in which nitrate was dissolved in pure water. The relative standard deviations (n=5) of migration time, peak area, peak height were 0.1, 3.0, 1.5%, respectively. The limit of detection (S/N=3) for nitrate was 35 microg/l in seawater samples with relatively low concentration BGE (0.1 M sodium phosphate, pH 6.2). The overall procedure consisting of online preconcentration and separation was as simple as routine CZE except for a slightly longer sample injection time (3-4 min).     

Determination of histamine and histidine by capillary zone electrophoresis with pre-column naphthalene-2,3-dicarboxaldehyde derivatization and fluorescence detection

A rapid and sensitive method was developed for the simultaneous determination of histamine and histidine by capillary zone electrophoresis with lamp-induced fluorescence detection. A fluoregenic derivatization reagent, naphthalene-2,3-dicarboxaldehyde (NDA) was successfully applied to label the histamine and histidine respectively. The derivatization conditions and separation parameters including pH and concentration of electrolyte and sample injection were optimized in detail. The optimal derivatization reaction was performed with 1.0 mM NDA, 20 mM NaCN, and 20 mM borate buffer, pH 9.1 for 15 min. The separation of NDA-tagged histamine and histidine could be achieved in less than 200 s with 40 mM phosphate buffer (pH 5.8) as the running buffer. The detection limits for histamine and histidine were 5.5 x 10(-9) and 3.8 x 10(-9) M, respectively (S/N = 3). The relative standard derivations for migration time and peak height of derivatives were less than 1.5 and 5.0%, respectively. The method was successfully applied to the analysis of histamine and histidine in the P815 mastocytoma cells and the beer samples.     

Analysis of intact heparin by capillary electrophoresis using short end injection configuration

A capillary electrophoresis method for the analysis of intact heparin was developed using a phosphate buffer and a fused silica capillary. Operational parameters such as pH and concentration of the running buffer were investigated. The short end injection configuration permitted a gain on peak efficiency, on the analysis time and on the repeatability of both migration times and peak areas, through a reduction of the migration distance. Moreover, the beneficial effect of the presence of sodium chloride in the heparin sample on the peak efficiency was demonstrated and the influence of the salts on the conformation of the heparin was discussed. The optimized method (short end injection configuration, 50mM phosphate buffer pH 3, heparin sample prepared in 10 g/L NaCl solution) was validated in terms of linearity, reproducibility and specificity according to ICH requirements.     

Phase-Sensitive A. C. Polapography of 1, 10-Phemanthroline Determination of Trace Concentrations of Iron

Abstract

Indirect determination of trace concentrations of iron was studied by monitoring the decrease of the a. c. polarographic wave of 1, 10- phenan tli rol i ne (phen). Fundamental harmonic, with current measured at Φ = 90°, was utilized. The best supporting electrolyte was found to be a 0.6 H NaClO₄ solution of pH 4.5 with acetate buffer. The approach consists in running polarograns for the supporting electrolyte containing buffer and phen, subsequent to sample addition, and after each addition of standard, respectively. The effect of pH, buffer system, some common anions and iron(III) was investigated. The method has been applied to the determination of iron in pure samples, reference standard material, and tap water. The detection limit was 4 ng mL^?1.     

高效毛细管电泳分离测定水中的乙酸和氯代乙酸

用邻苯二甲酸氢钾(pH=5.4)缓冲液作为电泳的背景电解质,以十六烷基三甲基溴化铵作为电渗流抑制剂,用甲基叔丁基醚作为萃取剂处理水样,建立了一种测定水中的乙酸和氯代乙酸的简单灵敏的毛细管区带电泳(紫外检测)法.测定结果表明,分析物的迁移时间和峰面积的日内相对标准偏差分别低于0.33%和4.45%,日间相对标准偏差分别低...     

Speciation of magnesium in rat plasma using capillary electrophoresis-inductively coupled plasma-atomic emission spectrometry

A new method for speciation analysis of magnesium species and quantification of free magnesium concentrations in rat plasma was developed by on-line coupling of CE with inductively coupled plasma-atomic emission spectrometry (ICP-AES). Baseline separation of seven magnesium species was achieved by using a 120 cm (100 microm internal diameter) fused-silica capillary, a 20 kV separation voltage and a solution of 50 mmol/L NaAc-HAc (pH 5.5) as electrolyte buffer. CE-ICP-AES analysis of a rat plasma sample showed the presence of seven magnesium species, one of which was identified as free Mg2+ ion by spiking a Mg2+ standard; the migration time of the Mg2+ peak in the standard and the spiked sample matched with each other. One protein-bound magnesium species in rat plasma is associated with albumin, and the other three species are combined with globulin. The concentration of free magnesium in the plasma was 14.0 mg/L. The other six magnesium species were estimated to be 4-15 mg/L. RSDs of migration time and peak area for the magnesium species from ten replicates were less than 5%. The developed method was also applied to speciation analysis of magnesium species in spiked plasma samples. The recoveries of the free magnesium species in four samples ranged from 95.8 to 103.8%.     

Electro membrane extraction combined with capillary electrophoresis for the determination of amlodipine enantiomers in biological samples

Electro membrane extraction as a new microextraction method was applied for the extraction of amlodipine (AM) enantiomers from biological samples. During the extraction time of 15 min, AM enantiomers migrated from a 3 mL sample solution, through a supported liquid membrane into a 20 μL acceptor solution presented inside the lumen of the hollow fiber. The driving force of the extraction was 200 V potential, with the negative electrode in the acceptor solution and the positive electrode in the sample solution. 2-Nitro phenyl octylether was used as the supported liquid membrane. Using 10 mM HCl as background electrolyte in the sample and acceptor solution, enrichment up to 124 times was achieved. Then, the extract was analyzed using CD modified CE method for separation of AM enantiomers. Best results were achieved using a phosphate running buffer (100 mM, pH 2.0) containing 5 mM hydroxypropyl-α-CD. The range of quantitation for both enantiomers was 10-500 ng/mL. Intra- and interday RSD (n=6) were less than 14%. The limits of quantitation and detection for both enantiomers were 10 and 3 ng/mL respectively. Finally, this procedure was applied to determine the concentration of AM enantiomers in plasma and urine samples.     

胶束电动毛细管色谱法分析头孢哌酮与其S-异构体等杂质

以十二烷基硫酸钠(SDS)胶束为准固定相,考察了头孢哌酮、头孢哌酮S-异构体、头孢哌酮杂质A及其他未知杂质在胶束电动毛细管色谱(MECC)分离模式下的分离行为。研究了运行缓冲液的pH值、磷酸盐浓度、SDS浓度、甲醇体积分数、分离电压、分离温度等因素对头孢哌酮、S-异构体、头孢哌酮杂质A及其他杂质的迁移时间、分离度以及可分离出的杂质个数的影响。结果发现,这些因素对头孢哌酮与诸杂质间的分离及检测有显著的影响,尤以pH值为最。它不仅影响它们的迁移时间和分离效率,还直接影响头孢哌酮及其杂质峰的检测。优化后的分离条件:运行缓冲液为70 mmol/L磷酸盐-100 mmol/L SDS (pH 6.5),分离电压为15 kV,分离温度为25 ℃。在此条件下,用非涂渍石英毛细管51.0 cm×75 μm(有效长度42.5 cm),压力进样5 kPa×5 s,在254 nm波长下进行检测,可分离出28个杂质,诸杂质彼此间及与头孢哌酮间可得到有效分离。并将该方法成功地用于测定注射用头孢哌酮钠的含量和有关物质,结果令人满意。     

Determination of nonylphenol and nonylphenol ethoxylates in wastewater using MEKC

Nonylphenol ethoxylates (NPEO_x) are surfactants which are used worldwide and can be transformed in the environment by microorganisms to form nonylphenol (NP). Analysis of these compounds was carried out with micellar electrokinetic capillary chromatography (MEKC). Different parameters such as background electrolyte (BGE) solution, pH, type of surfactant, and sample stacking were optimized. The use of CHES (20 mM, pH 9.1) in combination with 50 mM sodium cholate as a surfactant as BGE solution, together with sample stacking using 50 mM NaCl in the sample and an injection time of 20 s, provided the best separation of the compounds studied. The method was applied to the determination of target analytes in two types of sludge water coming from two steps of a wastewater treatment plant. Liquid–liquid extraction was carried out using toluene as solvent, resulting in recoveries around 100% for all studied analytes. The presence of NPEO_x was observed in the first step of the sludge water treatment, based on migration time and UV spectra. Identification was confirmed using tandem MS. LOQs of the studied compounds were in the range of 12.7 to 30.8 ng/mL, which is satisfactory for the analysis of real wastewater samples.     

毛细管区带电泳法间接测定红细胞中的主要无机阳离子

建立了间接测定红细胞中主要无机阳离子的毛细管区带电泳方法, 考察了背景溶液pH、咪唑和酒石酸浓度等对无机离子分离效果及峰面积的影响. 以10 mmol/L咪唑-4 mmol/L酒石酸(pH 5.5)为背景, 在15 kV、214 nm的条件下, 对红细胞中K 、Mg2 、Ca2 和Zn2 进行了定性、定量分析, 回收率在96%～104%之间, 迁移时间和峰面积的相对标准偏差分别低于0.76%和2.8%(日内), 0.85%和3.7%(日间). 所建方法有望成为一种测定细胞内离子含量的辅助方法.     

根际土壤溶液中磷的毛细管电泳分析

应用毛细管区带电泳间接紫外吸收法,对测定根际土壤溶液中PO43-的检测波长、电泳温度、分离电压和电解液组成等参数进行了选择,发展了根际土壤溶液中PO34-浓度的毛细管电泳分析法。选择后的电泳条件为:电解液为32mmol/L三羟甲基氨基甲烷+4mmol/L1,2,4-苯三酸+0.3mmol/L十六烷基三甲基溴化铵(pH=8.5);检测波长为205nm,分离电压为-20kV,温度为25℃。本方法有效地屏蔽了土壤溶液中Cl-,SO42-和NO3-等离子对PO43-测定的影响,对根际土壤溶液中PO43-的检出限为0.68mg/L(S/N=3);回收率为87.2%～99.4%,适于测定微量根际土壤溶液样品中PO34-的浓度。     

Insights into electrolyte effects on photoactivities of dye-sensitized photoelectrochemical cells for water splitting

Dye-sensitized photoelectrochemical cell(DS-PEC) is an especially attractive method to generate hydrogen via visible light driven water splitting. Electrolyte, an essential component of DS-PEC, plays a great role in determining the photoactivities of devices for water splitting. When using phosphate buffer(pH = 6.4)as electrolyte, the DS-PEC displayed much higher photoactivity than using 0.1 M Na_2SO_4(pH = 6.4) as electrolyte. The insight is phosphate anion gathers together to form a negative electrostatic field on TiO_2 surface, which increases the resistance in the TiO_2/catalyst and electrolyte interface and validly reduces the charge recombination from TiO_2 to the oxidized catalyst.     

Determination of oxoanions in river water by capillary electrophoresis

A new capillary electrophoresis (CE) procedure was developed for simultaneous determination of ten oxoanions (CrO4(2-), SeO4(2-), MoO4(2-), WO4(2-), VO4(3-), SeO3(2-), As04(3-), TeO3(2-), TeO4(2-), and AsO3(3-)) which were baseline-separated from each other and from the interfering UV absorbing anions (NO3- and NO2-) commonly found in environmental water samples. The new background electrolyte system developed contained 5 mM potassium phosphate and 0.007 mM octadecyltrimethylammonium hydroxide, pH 11.2. The optimized working conditions were electrokinetic sampling at -5 kV for 10 s, running voltage at -15 kV with 5 microA current, and detection wavelength at 205 nm. No interference was observed for non-UV-absorbing anions and UV-absorbing anions up to 20 and 10 times higher concentrations respectively. The speed of analysis was fast, with a complete CE run within 6 min. Wide linear ranges (1-2,000 microg/L), good repeatability in migration time (relative standard deviation RSD 0.55-2.8%), satisfactory precision in peak area (RSD 3.8-5.6%) and peak height (RSD 3.9-5.3%) measurement, and detection limits (1-25 microg/L) sufficiently sensitive to detect oxoanions found in environmental water samples were obtained. The reliability of the CE procedure developed had been established by recovery test and parallel method determination using atomic absoprtion spectrophotometry for real river water sample.     

Analysis of methylglyoxal in water and biological matrices by capillary zone electrophoresis with diode array detection

We describe a new method for the determination of methylglyoxal in water and biological matrices, using o-phenylenediamine as derivatizing agent and solid-phase extraction followed by capillary zone electrophoresis with diode array detection. 25 mM sodium phosphate running buffers at pH 2.2, 30 kV, and 25 degrees C allowed the best instrumental conditions for the optimum separation of methylglyoxal in a suitable analytical time (< 10 min), using an uncoated fused-silica capillary of 75 microm inner diameter and an effective length of 45.1 cm with an extended light path and the wavelength set to 200 nm. Under optimized instrumental conditions, good reproducibility of the migration time (< 1.1%), precision (< 5%), an excellent linear dynamic range from 0.1 to 3.6 mg/L (r(2) = 0.9997), and low limits of detection (7.2 microg/L) were obtained for methylglyoxal measurements, using the internal standard methodology. Assays on laboratory-spiked tap and ground water samples allowed a remarkable accuracy, presenting yields of 95.0 +/- 4.3 and 94.0 +/- 1.1%, respectively, and good performance to determine methylglyoxal in beer and yeast cells suspensions matrices was also obtained at trace level. The present methodology is a cost-effective alternative for routine quality control analysis, showing to be reliable, sensitive, and with a low sample volume requirement to monitor methylglyoxal in water and biological matrices.     

Nucleoside monophosphates recognition using macrocyclic polyamine bonded phase in capillary electrochromatography

An open-tubular wall-coated macrocyclic polyamine capillary column (70 cm x 75 microm ID) with 50 cm effective length for the separation of nucleoside monophosphates is described. Some parameters with respect to concentration, pH, composition of the buffer, and voltage in order to optimize the separation were studied. The coated capillary showed reversed electroosmotic flow (EOF), allowing anions to be separated in the co-EOF mode. Baseline separations were achieved for the eight nucleotides in less than 26 min using a background electrolyte consisting of H(3)PO(4)-NaH(2)PO(4) (30 mM, pH 3.10), an applied voltage of -15 kV, and detection at 254 nm. The macrocyclic polyamine on the capillary wall introduced anion coordination for the interaction with the analytes, the strength of which could be moderated by the type and concentration of the competing ion used in the background electrolyte (BGE). With a low concentration of the competing ion (phosphate ion), the migration behavior followed that obtained in the electrophoretic system. Increasing the concentration of the competing ion resulted in a faster migration and more complete elution of the analyte. The method established was also employed for the analysis of nucleotides in mushrooms. Aqueous extracts of mushrooms from different species and various extraction methods were injected directly for the analysis. Uridine 5'-monophosphate, guanosine 5'-monophosphate, adenosine 5'-monophosphate, and cytidine 5'-monophosphate, were found in the sample tested.     

Migration behaviour and separation of tramadol metabolites and diastereomeric separation of tramadol glucuronides by capillary electrophoresis

Capillary electrophoresis with UV detection was used to separate tramadol (TR), a centrally acting analgesic, and its five phase I (M1, M2, M3, M4, M5) and three phase II metabolites (glucuronides of M1, M4 and M5). Several factors were evaluated in optimisation of the separation: pH and composition of the background electrolyte and the influence of a micellar modifier, sodium dodecyl sulfate. Baseline separation of TR and all the analytes was obtained with use of 65 mM tetraborate electrolyte solution at pH 10.65. The lowest concentrations of the analytes that could be detected were below 1 microM for the O-methylated, below 2 microM for the phenolic and ca. 7 microM for the glucuronide metabolites. The suitability of the method for screening of real samples was tested with an authentic urine sample collected after a single oral dose (50 mg) of TR. After purification and five-fold concentration of the sample (solid-phase extraction with Oasis MCX cartridges), the parent drug TR and its metabolites M1, M1G, M5 and M5G were easily detected, in comparison with standards, in an interference-free area of the electropherogram. Diastereomeric separation of TR glucuronides in in vitro samples was achieved with 10 mM ammonium acetate-100 mM formic acid electrolyte solution at pH 2.75 and with basic micellar 25 mM tetraborate-70 mM SDS electrolyte solution at pH 10.45. Both separations showed that glucuronidation in vitro produces glucuronide diastereomers in different amounts. The authentic TR urine sample was also analysed by micellar method, but unambiguous identification of the glucuronide diastereomers was not achieved owing to many interferences.     

Voltammetric determination of mesotrione at hanging mercury drop electrode

A study of the electrochemical reduction of the mesotrione pesticide on a hanging mercury drop electrode (HMDE) was performed as a basis for the development of a sensitive analytical method for natural samples. The electrochemical characteristics of herbicide mesotrione dissolved in a phosphate buffer (pH 7.0) have been determined by means of electrochemical techniques such as cyclic voltammetry (CV) and differential pulse voltammetry (DPV) over a wide range of pH from 2.0 to 10.0. The experimental parameters, such as electrolyte type and its pH, pulse amplitude, and scan rate were optimized. The method was applied to the determination of the pesticide in a spiked soil samples. Using this method, a linear calibration curve for mesotrione was obtained up to the 0.1 μM range in pH 7 phosphate buffer solution with a detection limit (S/N = 3) of 50 nM. The method can be applied successfully to the determination of mesotrione in soils. The text was submitted by the authors in English.     

硫酸沙丁胺醇的毛细管电泳非接触电导法检测

建立了毛细管电泳-非接触电导检测分离测定硫酸沙丁胺醇的分析方法。分别考察了分离介质、背景电解质及其浓度和pH、分离电压、进样时间、激发电压、激发频率等因素对实验结果的影响。在优化的实验条件(以15 mmol/L乳酸水溶液(pH 2.7)为电泳介质,10 kV下电动进样3 s,分离电压为10 kV,激发电压为60 V,激发频率为120 kHz)下,硫酸沙丁胺醇的检出限(信噪比为3)为1.92 mg/L,在9.60～48.0 mg/L质量浓度范围内有良好的线性关系(r=0.995),迁移时间的相对标准偏差(RSD)为2.7%。将该方法用于硫酸沙丁胺醇片和硫酸沙丁胺醇气雾剂中的硫酸沙丁胺醇含量的测定,加标回收率为90%～113%,检测结果与药厂的标示值相符合,为硫酸沙丁胺醇的检测提供了一种简便、快速、高灵敏的方法。关键词: 毛细管电泳;非接触电导检测法;硫酸沙丁胺醇;硫酸沙丁胺醇片;硫酸沙丁胺醇气雾剂     

Determination of fluoride in natural waters by ion-selective electrode potentiometry after co-precipitation with aluminium phosphate

The most effective conditions for masking aluminium in the determination of mug/1. levels of fluoride in water by ion-selective electrode potentiometry after co-precipitation with aluminium phosphate have been re-examined. The effectiveness of citrate for masking aluminium increases with pH, and up to 1.5 x 10(-2)M aluminium can be masked quantitatively at pH 8.5. Fluoride (5-100 mug in 500 ml of sample solution) is quantitatively co-precipitated at pH 4.7 with approximately 90 mg of aluminium phosphate. After dissolution of the precipitate and adjustment of the solution to pH 8.5 with TISAB, the fluoride content can be measured with a fluoride ISE. The method is simple and rapid, and is suitable for the determination of trace amounts of fluoride in various water samples.     

Separation of 2-aminobenzoic acid-derivatized glycosaminoglycans and asparagine-linked glycans by capillary electrophoresis.

A capillary electrophoresis method was developed for the analysis of oligosaccharides combined with derivatization with 2-aminobenzoic acid. Glycosaminoglycan delta-disaccharides were effectively resolved on a fused-silica capillary tube using 150 mM borate, pH 8.5, as a running electrolyte solution. This analytical method was applied to the identification of glycosaminoglycan in combination with enzymatic digestion. The separation of N-glycans or glucose-oligomers was performed with a phosphate buffer containing polyethylene glycol or borate as an electrolyte solution. This method is expected to be useful in the determination of oligosaccharide structures in a glycoprotein.