Diphenic acid as a selective reagent for the amperometric determination of thorium(IV)

Th(IV) has been titrated amperometrically at an applied e.m.f of −1.0 V (dropping mercury electrode vs. SCE) with diphenic acid (neutralized with sodium hydroxide). Th(IV) in the range 8.0–60.0 mg/100ml can be determined with an error of ±0.5%. A number of foreign ions including Ce(IV), Zr(IV), La(III), U(IV), U(VI) do not interfere even if present in excess but traces of Ti(IV) do. The method is rapid and selective and has been used for the determination of Th(IV) in monazite sand.     

Extraction of U(VI), Zr(IV) and Th(IV) from perchlorate media, by PC-88A

Extraction of U(VI), Zr(IV) and Th(IV) has been investigated from perchlorate media using 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) dissolved in toluene. The extraction of U(VI), Zr(IV) and Th(IV) was found to be quantitative in the pH range 1.6 to 3.2, 2.0 to 4.7 and 2.3 to 3.8, respectively, with 3.0^.10^-3, 5.6^.10^-4 and 1.0^.10^-2M PC-88A dissolved in toluene. U(VI) was stripped with 4.0M HCl, Zr(IV) with 2.5M NaF and Th(IV) with 8.0M HCl from the metal loaded organic phase containing PC-88A dissolved in toluene. The probable extracted species have been ascertained by plotting log D vs. log [HR] as UO₂R₂ ^.2HR, ZrR₄ ^.2HR and ThR₄ ^.4HR, respectively. U(VI) was separated from Zr(IV) and Th(IV) and from other associated metals. This method was proved by the determination of U(VI) in some real samples.     

Sorption-spectrometric determination of lanthanum in the presence of uranium and thorium with the reagent Arsenazo M on the solid phase of fibrous filled sorbents

The possibility of the determination of La(III) in the presence of U(VI) and Th(IV), a solid phase with the reagent Arsenazo M, was examined. It was demonstrated that the determination of lanthanum with Arsenazo M in 0.05 M HCl in the presence of 3-, 2-, 1-, and 10-fold amounts of U(VI), Th(IV), Zr(IV), and Ti(IV) is possible after sorption on polyacrylonitrile fiber filled an ion exchanger with iminodiacetate groups (PANV-ANKB-50). For sorption under the optimum conditions at pH 5, the detection limit of lanthanum is 0.01 μg/mL. The method for the determination of lanthanum was verified by the added-found method in the analysis of tap water. To decrease the matrix effect, it is recommended to perform sorption in the analysis of water at pH 2.5. In this case, the detection limit of La(III) is 0.02 μg/mL, RSD < 20%. The time of the analysis of 5 or 6 samples is no longer than 20 min.     

Synergistic effect of HBMPPT with PSO, DOSO and TBP on the extraction of U(VI) and on the separation of U(VI) and Th(IV)

Some popular neutral extractants (PSO-petroleum sulfoxide, DOSO-di-n-octyl sulfoxide, TBP-tributylphosphate etc.) were chosen as synergist to study the synergistic effect on the extraction reaction with HBMPPT (4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-thione) for U(VI), and the synergistic separation ability of HBMPPT for U(VI) and Th(IV). The synergistic extraction ability shown by the studied systems for U(VI) is as follows: PSO>DOSO>TBP, and the same sequence was also verified for the separation coefficient of U(VI) and Th(IV). The synergistic complexes may be presented as: UO₂NO₃·BMPPT·S and UO₂(BMPPT)₂·S for U(VI) (S is PSO, DOSO or TBP).     

Preconcentration and determination of ultra-trace amounts of U(VI) and Th(IV) using titan yellow-impregnated Amberlite XAD-7 resin

A simple and sensitive method for the determination of ultra trace amounts of U(VI) and Th(IV) ions by spectrophotometric method after solid-phase extraction on a new extractant-impregnated resin (EIR) has been reported. The new EIR was synthesised by impregnating a weakly polar polymeric adsorbent, Amberlite XAD-7, with titan yellow (TY) as extractant. The analytical method is based on the simultaneous adsorption of analyte ions in a mini-column packed with TY/XAD-7 and performing sequential elution with 0.5% (w/v) Na₂CO₃ for uranium and 2.0 M HCl for thorium. The influences of the analytical parameters including pH, salting out agent and sample volume were investigated. The interference effects of foreign ions on the retention of the analyte ions were also explored. The limits of detection for U(VI) and Th(IV) were as low as 50 and 25 ng L^?1, respectively. Relative standard deviations (n = 7) for U(VI) and Th(IV) were 3.1% and 2.9%, respectively. The method was successfully applied to the determination of ultra trace amounts of U(VI) and Th(IV) in different real matrices including industrial wastewater samples and environmental waters. The proposed method was validated using three certified reference materials and the results were in good agreement with the certified values.     

Kinetic studies on the solvent extraction of uranium (IV), thorium (IV) and uranium (VI) from nitric acid solutions with tributyl phosphate

The kinetics of solvent extraction of U (IV), Th (IV) and U (VI) from nitric acid solution with tributyl phosphate (TBP) in kerosene and cyclohexane have been studied using the single drop technique. The effects of concentrations of U (IV), Th (IV), U (VI), nitric acid, nitrate, TBP and temperature on the extraction rates of U (IV), Th (IV) and U (VI) have been examined. The mechanisms for the three extraction processes are discussed.     

Solvent extraction behaviour of lanthanum(III), cerium(III), europium(III), thorium(IV) and uranium(VI) with 3-phenyl-4-benzoyl-5-isoxazolone

The extraction behaviour of La(III), Ce(III), Eu(III), Th(IV) and U(VI) with 3-phenyl-4- benzoyl-5-isoxazolone (HPBI) in chloroform has been studied. The mechanism of extraction and the species extracted have been identified. Extraction constants for each system have been calculated. The system has been used to separate Th(IV) from U(VI) and from La(III), Ce(III) and Eu(III). A comparison of the extraction constants with those for the 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HPMBP) and thenoyltrifluoroacetone (HTTA) systems indicates that HPBI extracts these metal species better than HPMBP and HTTA do.     

Sorption-spectroscopy and test determination of uranium(VI) and iron(III) from a single sample on the solid phase of fiber materials filled with an AB-17 ion exchanger

Diffuse reflectance spectroscopy has been used for the study of the sorption of malonate and glycolate complexes of uranium(VI) and iron(III), present simultaneously in solution, onto the solid phase of fiber materials filled with an AB-17 anion exchanger. In the form of malonate complexes uranium(VI) is determined in 0.5 M HCl on substrate discs with immobilized Arsenazo III, while iron(III) is determined on substrate discs with potassium thiocyanate in 0.5 M HCl. The dependence of the analytical signals on the concentrations of U(VI) and Fe(III) is linear in the ranges 0.02–0.16 μg/mL; the detection limit is 0.01 μg/mL. The possibility of analysis of U(VI) and Fe(III) mixtures in ratio from 1: 5 to 5: 1 in the presence of 2-fold concentrations of Zr(IV), Th(IV), and Ti(IV), 5-fold concentrations of Bi(III), 10-fold concentrations of Cu(II), 20-fold concentrations of La(III), 100-fold concentrations of Ni(II) and Zn(II), and 200-fold concentrations of Co(II) and Ca(II) has been demonstrated. Standard color scales in the concentration range from 0.02 to 0.2 μg/mL have been used for the visual determination of uranium(VI) and iron(III).     

Simultaneous determination of uranium(VI) and thorium(IV) with carminic acid by derivative spectrophotometry

The reactions of uranium(VI) and thorium(IV) ions with carminic acid have been investigated. These ions react with carminic acid in neutral medium, forming colored complexes. The dark purple or red wine complexes show a high absorption in the visible region (597 nm U(VI) and 616 nm Th(IV)). Chemical variables that affect the reaction have been optimized. The spectral overlapping of the color of complexes has been resolved by first-derivative spectrophotometry. The simultaneous determination of uranium(VI) and thorium(IV) mixtures is accomplished by taking the derivative signal (zero crossing) at 597 nm for U(VI) determination and at 616 nm for Th(IV) determination, respectively. The method has been applied to Tyuyamonite ore, containing in the matrix both ions.     

An effective process for the separation of U(VI), Th(IV) from rare earth elements by using ionic liquid Cyphos IL 104

Separation and recovery of U(VI) and Th(IV) from rare earth minerals is a very challenging work in rare earth industrial production. In the present study, a homemade membrane emulsification circulation (MEC) extractor was used to separate U(VI) and Th(IV) from rare earth elements by using Cyphos IL 104 as an extractant. Batch experiments were carried out using a constant temperature oscillator to investigate the extraction parameters of the single element and the results indicated that Cyphos IL 104 could reach the extraction equilibrium within 30 min for all the three elements, i.e., U(VI), Th(IV), and Eu(III). Besides, the MEC extractor possessed a strong phase separation ability. The extraction efficiencies of U(VI), Th(IV), La(III), Eu(III) and Yb (III) increased with the increase of pH. La(III), Eu(III) and Yb(III) were hardly extracted when pH ≤ 1.50, which was beneficial for effectively separating U(VI) and Th(IV) from La(III), Eu(III) and Yb(III). In the multi-stages stripping experiments, when the stripping stage number was 3, the effective separation could be achieved by using HCl and H₂SO₄, since the stripping efficiency reached 80.0% and 100.0% for Th(IV) and U(VI), respectively. Slope method and FT-IR spectra showed that Cyphos IL 104 reacted with U(VI) and Th(IV) by chelation mechanism. The extraction of multi-elements indicated that U(VI) and Th(IV) could be well separated from the solution which contains all rare earth elements, and the extraction efficiencies of U(VI) and Th(IV) both were close to 100.0%. Based on the above experimental results, a flowchart for efficient separation of U(VI) and Th(IV) from rare earth elements was proposed.     

Experimental and theoretical investigations of IR spectra and electronic structures of the U(OH)2, UO2(OH), and UO2(OH)2 molecules

Reactions of laser-ablated U atoms and H2O2 molecules produce UO2, H2UO2, and UO2(OH)2 as major products and U(OH)2 and HU(O)OH as minor products. Complementary information is obtained from similar reactions of U atoms with D2O2, with H2 + O2 mixtures, and with H2O in excess Ar. Through extensive relativistic density functional theory calculations, we have determined the geometry structures and ground states of these U species with a variety of oxidation states U(II), U(IV), U(V), and U(VI). The calculated vibrational frequencies, IR intensities, and isotopic frequency ratios are in good agreement with the experimental values, thus supporting assignments of the observed matrix IR spectra. We propose that the reactions proceed by forming an energized [U(OH)4] intermediate from reactions of the excited U atom with two H2O2 molecules. Because of the special stability of the U(VI) oxidation state, this intermediate decomposes to the UO2(OH)2 molecule, which reveals a distinctive difference between the chemistries of U and Th, where the major product in analogous Th reactions is the tetrahedral Th(OH)4 molecule owing to the stable Th(IV) oxidation state.     

Preconcentration of uranium(VI) and thorium(IV) from aqueous solutions using low-cost abundantly available sorbent

Olive cake as low-cost abundantly available sorbent has been characterized by N₂ at 77 K adsorption, porosity analysis, elemental analysis and IR spectra and has been used for preconcentrating of uranium(VI) and thorium(IV) ions prior to their determination spectrophotometrically. The optimum pH values for quantitative sorption of U(VI) and Th(IV) are 4–7 and 3–7, respectively. The enrichment factor for the preconcentration of U(VI) and Th(IV) were found to be 125 and 75 in the given order. The sorption capacity of olive cake is in the range of 2,260–15,000 μg g⁻¹ for Th(IV) and in the range of 1,090–17,000 μg g⁻¹ for U(VI) at pH 3–7. The sorbent exhibits good reusability and the uptake and stripping of the studied ions were fairly rapid. The elution of U(VI) and Th(IV) was performed with 0.3–1 M HCl/1–2 M HNO₃ and 0.3–0.8 M HCl/1 M HNO₃, respectively. The precision of the method was 1.8 RSD% for U(VI) and 2.5 RSD% for Th(IV) in a concentration of 1.00 μg mL⁻¹ for 10 replicate analysis. The influence of some electrolytes and cations as interferents was discussed. Separation of U(VI) and Th(IV) from other metal ions in synthetic solution was achieved.     

Selective extraction of U(VI) over Th(IV) from acidic streams using di-bis(2-ethylhexyl) malonamide anchored chloromethylated polymeric matrix

A new chelating polymeric sorbent has been developed using Merrifield chloromethylated resin anchored with di-bis (2-ethylhexyl) malonamide (DB2EHM). The modified resin was characterized by CPMAS NMR spectroscopy, FT-NIR-FIR spectroscopy, CHN elemental analysis and also by thermo gravimetric analysis. The fabricated sorbent showed superior binding affinity for U(VI) over Th(IV) and other diverse ions, even under high acidities. Various physio-chemical parameters, like solution acidity, phase exchange kinetics, metal sorption capacity, electrolyte tolerance studies, etc., influencing the resin’s metal extractive behavior were studied by both static and dynamic method. Batch extraction studies performed over a wide range of solution acidity (0.01-10 M) revealed that selective extraction of U(VI) could be achieved even up to 4 M acidity with distribution ratios (D) in the order of ∼10³. The phase exchange kinetics studies performed for U(VI) and Th(IV) revealed that time duration of <15 min was sufficient for >99.5% extraction. But similar studies when preformed for trivalent lanthanides gave very low D values (<50), with the extraction time extending up to 60 min. The metal sorption studies performed for U(VI) and Th(IV) at 5 M HNO₃ was found to be 62.5 and 38.2 mg g⁻¹,respectively. Extraction efficiency in the presence of inferring electrolyte species and inorganic cations were also examined. Metal ion desorption was effective using 10-15 mL of 1 M (NH₄)₂CO₃ or 0.5 M α-hydroxy isobutyric acid (HIBA). Extraction studies performed on a chromatographic column at 5 M acidity were found to give enrichment factor values of 310 and 250 for U(VI) and Th(IV), respectively. The practical utility of the fabricated chelating sorbent and its efficiency to extract actinides from acidic waste streams was tested using a synthetic nuclear spent fuel solution. The R.S.D. values obtained on triplicate measurements (n = 3) were within 5.2%.     

Determination of neptunium by redox titration

A simple and quick method for the potentiometric determination of neptunium on the 2-5 mg scale has been developed. It consists of oxidation to Np(VI) by AgO or fuming with HClO(4), destruction of excess of AgO by sulphamic acid, reduction of Np(VI) to Np(IV) with a slight excess of standard Fe(II) in 2M H(2)SO(4) and potentiometric titration of the excess of Fe(II) with standard Ce(IV). The precision is +/-0.5%.     

Extraction of uranium(VI) and thorium(IV) from nitric acid solution by N-alkylcaprolactam

Extraction of uranium(VI), thorium(IV) from nitric acid has been studied with N-octylcaprolactam and N-(2-ethyl)hexylcaprolactam. Distribution coefficients of U(VI), Th(IV) and HNO₃ as a function of aqueous NHO₃ concentration, extractant concentration and temperature have been studied. The compositions of extracted species, thermodynamic parameters of extraction have been evaluated. Third phase formation in extraction of U(VI) has been studied. Back extraction behavior of U(VI) and Th(IV) from the organic phase has also been tested. The results obtained are compared with those obtained by using TBP under the same experimental conditions.     

Studies on the extraction behavior of Zr(IV), Ce(III), Th(IV) and U(VI) from aqueous solutions of Arsenazo-I with HDEHP,HTTA, TDA and TCMA

The extraction behavior of Zr(IV), Ce(III), Th(IV) and U(VI) from aqueous solutions containing Arsenazo-I with the organic solvents tridodecylamine (TDA), 1-[thenoyl-(2)]-3-3-3-trifluoroacetone (HTTA), di(2-ethylhexyl) phosphoric acid (HDEHP) and tricaprylmethylammonium chloride (TCMA) in xylene has been investigated. Effect of hydrogen ion concentration in the aqueous phase, Arsenazo-I concentration, as well as the effect of solvent concentration on the extraction was studied. Some alternatives for separation of the elements studied were recommended enabling the spectrophotometric determination of these elements using Arsenazo-I without interference.     

Sorption behaviour of lanthanum(III), neodymium(III), terbium(III), thorium(IV) and uranium(VI) on Amberlite XAD-4 resin functionalized with bicine ligands

The complexing properties (capacity, pH effect, breakthrough curve) of a chelating resin, containing bicine ligands, were investigated for La(III), Nd(III), Tb(III), Th(IV) and U(VI). Trace amounts of these metal ions were quantitatively retained on the resin and recovered by eluting with 1 M hydrochloric acid. The capacity of the resin for La(III), Nd(III), Tb(III), Th(IV) and U(VI) was found to be 0.35, 0.40, 0.42, 0.25 and 0.38 mmol g(-1), respectively. Separation of U(VI) and Th(IV) from Ni(II), Zn(II), Co(II) and Cu(II) in a synthetic solution was carried out.     

Extraction and thermodynamic behavior of U(VI) and Th(IV) from nitric acid solution with tri-isoamyl phosphate

The extraction behavior of U(VI) and Th(IV) with tri-isoamyl phosphate–kerosene (TiAP–KO) from nitric acid medium was investigated in detail using the batch extraction method as a function of aqueous-phase acidity, TiAP concentration and temperature, then the thermodynamic parameters associated with the extraction were derived by the second-law method. It could be noted that the distribution ratios of U(VI) or Th(IV) increased with increasing HNO₃ concentration until 6 or 5 M from 0.1 M. However, a good separation factor (D _U(VI)/D _Th(IV)) of 88.25 was achieved at 6 M HNO₃, and the stripping of U(VI) from TiAP–KO with deionized water or diluted nitric acid was easier than that of Th(IV). The probable extracted species were deduced by log D-log c plot at different temperatures as UO₂(NO₃)₂·(TiAP)_(1–2) and Th(NO₃)₄·(TiAP)_(2–3), respectively. Additionally, △H, △G and △S for the extraction of U(VI) and Th(IV) revealed that the extraction of U(VI) by TiAP was an exothermic process and was counteracted by entropy change, while the extraction of Th(IV) was an endothermic process and was driven by entropy change.     

Extraction of uranium(VI) and thorium(IV) ions from nitric acid solutions by N,N,N′,N′-tetrabutyladipicamide

A new symmetrical diamide, the straight-chain alakyl substituted neutral tetrabutyladipicamide (TBAA) has been synthesized, characterized and used for the extraction of U(V) and Th(IV) from nitric acid solutions in a diluent composed of 50% 1,2,4-trimethylbenzene (TMB) and 50% kerosene (OK). Extraction distribution coefficients of U(VI) and Th(IV) as a function of aqueous nitric acid concentration, extractant concentration and temperature have been studied. Back-extraction of U(VI) and Th(IV) from organic phases by dilute nitric acid has been undertaken. From the data, the compositions of extracted species, equilibrium constants and enthalpies of extraction reactions have also been calculated.     

Adsorption Studies of Radionuclides and Toxic Metal Ions on a Modified Mesoporous Lanthanum(III) Silicate

A new adsorbent, modified mesoporous lanthanum(III) silicate, has been prepared with various molar ratios of Si/La (10, 20, 40, 80) and cethyltrimethylammonium bromide (CTAB) as structure directing agent. XRD, nitrogen sorption, SEM, IR, thermogravimetry and sorption of radionuclides and toxic metal ions have been studied. The results show that adsorption amount of some element such as Pb(II) and Th(IV) has been increased significantly by incorporation of lanthanum ions in the framework of adsorbent. Separation of Co(II)‐Th(IV), Co(II)‐U(VI) and Mo(VI)‐U(VI) has been developed on columns of this adsorbent.