混沌激光相关法测距系统的信号采集与处理

 混沌激光相关法测距技术可用于汽车防撞、光纤及电缆断点检测等,其中混沌信号的快速采集、存储以及处理是重要的单元技术。基于数据采集卡设计并实现了混沌激光测距系统的数据采集与处理,利用Visual Basic平台,开发了采集、存储的控制软件,并提出和编制了平均离散消除算法以实时地实现混沌信号的高信噪比相关运算。利用该采集处理系统,实验获得了低于±0.25 m的光纤断点定位精度。     

高功率二极管激光器失效特性研究

利用统计分析手段,对高功率二极管激光器封装中各工艺环节引起器件失效的原因进行了分析和归类.根据几种失效模式的分析结果,焊接空隙、结短路、腔面退化是引起高功率DL失效的主要模式,针对高功率二极管激光器失效的主要模式,对焊料沉积夹具及焊接工艺参数进行了改进和优化,大大提高了封装工艺水平,使封装的器件成品率由原来的77%提高到了85%以上.     

二极管泵浦Nd:YAG圆片激光技术研究

介绍了热容激光技术的发展历史及现状,介绍了固体激光器热容方式工作的基本原理,报道了二极管泵浦NdYAG圆片激光器热容方式工作的实验结果.用热像仪测量了激光器工作时增益介质通光面上的温度分布特性;采用干涉测量的方法测量了工作中的增益介质的与光束传输方向相垂直的方向上的折射率分布特性;结果表明片状固体增益介质热容方式工作对振荡光束波前畸变影响很小.给出了与光束传输方向相垂直的截面上增益介质的荧光分布.得到输出平均功率达47.5 W,此时的光-光转换效率为17%.     

高功率激光光束特性对激光加工的影响

决定光与物质相互作用的激光束的波长、入射角、偏振特性以及时间和空间特性是激光材料加工的主要光束特性。激光束的光束质量是其空间特性的量化反映。通过对两种不同激光加工系统输出激光光束质量进行测量和计算,根据多模激光束的聚焦理论,以及对激光深熔焊接实验结果的分析,研究了光束质量对深熔焊接焊缝成形的影响。结果表明,光束质量对聚焦光束的焦斑、聚焦角和焦深的影响不仅体现了激光源的可聚焦性,而且也标志了激光源的可加工能力,这是聚焦系统和焦点位置在选择过程中应该考虑的重要因素。     

Diode laser jet spectra and analysis of the ν14 fundamental of 1,1,1,2-tetrafluoroethane (HFC-134a)

High resolution infrared spectra have been measured for mixtures of 1,1,1,2-tetrafluoroethane in Ne, expanded in a supersonic planar jet. The ν₁₄ fundamental is an essentially unperturbed C-type band, exhibiting many ΔK_c=±2 transitions. Accurate excited state rotational and distortion constants have been determined from an analysis of about 1250 transitions, by using Watson’s Hamiltonian in the S-reduction. A local perturbation has been observed with a crossing at K^′_a=11 for J^′ values between 17 and 18, and could be accounted for by a x-Coriolis interaction with a perturbing vibrational level of A^′ symmetry at about 1205.53(1) cm⁻¹. Due to the very efficient cooling in the jet, the rotational temperature resulted to be about 20 K, and no evidence of hot-band absorption was found.     

Chemical and isotopic analysis using diode laser spectroscopy: applications to volcanic gas monitoring

We report on a diode-laser-based spectrometer, operating at a wavelength of 2 μm, which enables for simultaneous measurements of CO₂ and H₂O concentrations in gaseous mixtures with high precision and accuracy. We implemented the very simple approach of a direct measurement of absorption in a multiple reflection cell with a pathlength of 50 m. Gas concentration is simply retrieved from the integrated absorbance, without using calibration cells. The spectrometer is equipped with single-mode optical fibers in order to probe remote environments. The possible application in volcanic areas will be discussed. We also investigated the possibility to measure the isotopic ratio ¹³CO₂/¹²CO₂, which is another relevant parameter for monitoring volcanic activity.     

40mm孔径Nd:YAG片状器件的激光特性研究

本文首次报道了40mm孔径Nd:YAG片状激光器的激光特性.理论分析表明这类器件可望获得千瓦级激光平均功率.     

Direct ultrafast laser micro-structuring of materials using programmable beam shaping

Using active and programmable focal-spot shaping, we demonstrate direct femtosecond laser micro-structuring of materials. Surface marking as well as drilling with user-defined geometrical shapes of small dimensions (20 μm) are performed, without moving the laser beam nor the material target.     

直升机防撞激光雷达综合信息处理系统

设计了一种新型直升机载防撞激光雷达综合信息处理系统。通过对直升机姿态信息的捕获和修正、目标提取与识别、数据三维空间转换等技术,设计并实现了直升机载激光雷达的改进综合信息处理及显示,并且采用扫描成像激光雷达的探测试验对以上技术进行了实际验证。试验结果表明：该系统有效减小了直升机机动飞行时激光雷达探测画面的畸变,在横滚角30°时仍可有效修正探测图像;另外,在600 m处完成了对电力线等不易观察高危目标的迅速提取;实现了探测画面的三维综合高效显示,综合处理时间〈10 ms。本文提出的新的直升机载激光雷达综合信息处理方式有效改良了人机界面。     

光纤组束激光的工业加工应用前景分析

为了分析光纤组束激光的工业加工应用前景,对组束激光的角偏移和腔耦合效率进行了理论分析和数值计算,结果表明组束激光输出功率可以达到10kW量级。结合双光栅组束结构,对组束激光的光束质量进行控制,结果表明此条件下优化的组束激光光束质量可以达到1.4左右。光纤组束激光在输出功率和光束质量两方面均满足工业加工的应用需求。     

Fumes generated during laser processing of polyvinyl chloride (PVC)

An approach to the assessment of fumes produced in laser material processing is presented. The subsequent design of the fume containment system and sampling strategy is detailed. Polyvinyl chloride (PVC) has been selected for investigation and the complexity resulting from the plethora of additives is discussed. Qualitative results from the preliminary studies of CO₂ laser cutting of PVC are presented together with an appraisal of the problems involved in extending this to quantitative analysis. Benzene, hydrogen chloride (HCl) and methyl methacrylate were found to be the dominant emissions.     

Investigation into absorption of the incident laser beam during Nd:YAG laser processing of metals

Laser materials processing is highly affected by the existence of surface plasma. The absorption of surface plasma during drilling alters the power intensity distribution of the incident laser beam across the irradiated spot. The present study is carried out to measure the electron number density and temperature using a Langmuir probe while a mathematical formulation is conducted for the absorption coefficients due to electron-ion, electron-neutral atom collisions, inverse Bremsstrahlung, and photoionization processes. Consequently, a computer program is developed to compute the relevant absorption coefficients as well as the overall absorption coefficient. The laser power intensity distribution before and after the plasma absorption is computed at a plane 2.6 mm above the workpiece surface. It is found that 13% of the reduction occurs in the incident laser output power intensity at this plane in the plasma.     

时频分析在激光多普勒信号处理中的应用

建立了用来检测微机电系统谐振器面内运动的激光差动多普勒系统,测量了谐振器的振动速度。在信号处理过程中,首先使用电路系统去除高频载波成分,然后基于Matlab平台,选取时频分析中的Wigner-Ville分布对采集进入计算机的多普勒信号进行分析。提取了其中的速度信息,并与用计数法处理的结果进行了比较。结果表明具有较好的效果。     

The advances and characteristics of high-power diode laser materials processing

This paper presents a review of the direct applications of high-power diode lasers for materials processing including soldering, surface modification (hardening, cladding, glazing and wetting modifications), welding, scribing, sheet metal bending, marking, engraving, paint stripping, powder sintering, synthesis, brazing and machining. The specific advantages and disadvantages of diode laser materials processing are compared with CO₂, Nd:YAG and excimer lasers. An effort is made to identify the fundamental differences in their beam/material interaction characteristics and materials behaviour. Also an appraisal of the future prospects of the high-power diode lasers for materials processing is given.     

频谱分析型激光多普勒测速仪信号处理技术

为了提高激光多普勒测速仪的测量精度,提出对激光多普勒信号先进行跟踪滤波,再进行频谱细化和频谱校正的信号处理方法,并利用信号处理系统对实测的多普勒信号进行了实验研究。实验结果表明：跟踪滤波器在滤除基底信号及系统的部分噪声的基础上,实时跟踪多普勒信号的频率,信噪比明显提高,所得结果与多普勒频率的真实值相一致;频谱细化技术大大提高了频谱分辨力,频谱校正技术使校正后的频率更接近真实值。     

Measuring and calculating geometrical parameters of marine plankton using digital laser holographic imaging

The purpose of this paper is to develop an approach using digital laser holographic imaging for measuring and calculating geometrical parameters of marine plankton. It is very important for study of marine plankton and it facilitates the analysis of marine plankton. Using this approach, we obtained geometrical parameters of marine plankton including perimeter, equivalent diameter, lateral size and so on. It is found that a measurement aberration is less than 8% for copepods sample by using collimating reference wave.     

The study of a Tm:YLF laser pumped by a Raman shifted Erbium fiber laser at 1678 nm

A Tm:YLF laser pumped by a Raman shifted Er-fiber laser at 1.678 μm was studied at two Tm³⁺ ion concentrations equal to 1.5% and 5%. At output powers up to 460 mW the measured lasing efficiency at a wavelength of ~ 1.93 μm was as high as ~ 50%. The lasing performance was compared with that obtained under pumping by a 792-nm laser diode. The temporal structure of the laser pulse was recorded and the beam propagation factor M² was measured for all pumping conditions.     

小波分析在激光多普勒信号处理中的应用

提出将激光多普勒测速仪(LDV)应用于车载惯性导航系统中,阐述了激光多普勒自身速度仪的基本原理和小波变换的相关理论,并运用小波变换对多普勒信号进行检测、去噪及提取多普勒频率,仿真及实验结果表明：信号进行小波分解后,对每一级小波进行阈值处理,得到了较好的去噪效果;在小波降噪常见的阈值原则中,无偏似然估计阈值和极值阈值不容易丢失信号中的有用成分,而启发式阈值原则和固定阈值原则可以更有效地去除噪声;对于提取多普勒频率而言,小波变换与快速傅里叶变换所得的结果是一致的,而小波变换不但可以求出系统自身的运动速度,而且还可以求出对应速度发生的时刻。     

On‐chip laser processing for the development of multifunctional microfluidic chips

In the development of microfluidic chips, conventional 2D processing technologies contribute to the manufacturing of basic microchannel networks. Nevertheless, in the pursuit of versatile microfluidic chips, flexible integration of multifunctional components within a tiny chip is still challenging because a chip containing micro‐channels is a non‐flat substrate. Recently, on‐chip laser processing (OCLP) technology has emerged as an appealing alternative to achieve chip functionalization through in situ fabrication of 3D microstructures. Here, the recent development of OCLP‐enabled multifunctional microfluidic chips, including several accessible photochemical/photophysical schemes, and photosensitive materials permiting OCLP, is reviewed. To demonstrate the capability of OCLP technology, a series of typical micro‐components fabricated using OCLP are introduced. The prospects and current challenges of this field are discussed.

     

激光冲击对不锈钢焊接接头残余应力场的影响

针对不锈钢焊接接头存在残余应力且分布不均匀、容易发生应力腐蚀的问题,采用激光冲击强化对其进行处理,探究激光功率密度和冲击次数对表面残余应力状态的优化作用,并通过应力腐蚀试验验证优化效果。结果表明：随着功率密度增加,表面残余应力明显下降,但下降幅度逐渐减小,功率密度4.24 GW/cm2与2.83 GW/cm2冲击产生的残余应力相差不大,熔合区还存在残余拉应力,说明高功率密度不足以消除表面残余拉应力;随着冲击次数增加,残余拉应力显著降低,2.83 GW/cm2冲击3次之后,残余拉应力完全消除,局部最高应力梯度从54.7 MPa/mm下降到11.7 MPa/mm,获得了高数值、分布均匀的残余压应力层。激光冲击强化后,焊接试样的应力腐蚀断裂时间提高了33.48%,激光冲击强化产生的残余压应力是其应力腐蚀抗性提高的重要原因。