The effect of C3S on the early hydration of C3A

Journal of Thermal Analysis and Calorimetry - The hydration of C3A, C3S and C3A+C3S mixtures was examined by thermogravimetry, differential thermogravimetry and calorimetry. The results showed the...     

Kinetic analysis of the calcium hydroxide formed in the hydration of pure C3S and with the addition of Ca(NO3)2

By using a simultaneous thermogravimetry (TG) and differential thermal analyzer (DTA), the hydration processes of the pure C₃S and with the addition of Ca(NO₃)₂ was followed. The peak temperature was determined and kinetic analysis on one of the hydration products, calcium hydroxide, was performed. Results show that the use of Ca(NO₃)₂ increased the activation energy value of calcium hydroxide formed which is one aspect of the accelerating properties of Ca(NO₃)₂ while there is no sign of hydration for the addition of sucrose which proved its retarding property. It was also shown that the activation energy increased when the hydrated pastes aged. Cement chemists note: C=CaO, H=H₂ and S=SiO₂     

Effect of CaCO3 Filler Component on Solid State Decomposition Kinetic of PP/LDPE/CaCO3 Composites

In this study, the effect of addition Calcium carbonate (CaCO₃) filler component on solid state thermal decomposition procedures of Polypropylene-Low Density Polyethylene (PP-LDPE; 90/10 wt%) blends involving different amounts (5, 10, 20 wt%) Calcium carbonate (CaCO₃) was investigated using thermogravimetry in dynamic nitrogen atmosphere at different heating rates. An integral composite procedure involving the integral iso-conversional methods such as the Tang (TM), the Kissinger-Akahira-Sunose method (KAS), the Flynn-Wall-Ozawa (FWO), an integral method such as Coats-Redfern (CR) and master plots method were employed to determine the kinetic model and kinetic parameters of the decomposition processes under non-isothermal conditions. The Iso-conversional methods indicated that the thermal decomposition reaction should conform to single reaction model. The results of the integral composite procedures of TG data at various heating rates suggested that thermal processes of PP-LDPE-CaCO₃ composites involving different amounts of CaCO₃ filler component (5, 10, 20 wt%) followed a single step with approximate activation energies of 226.7, 248.9, and 252.0 kJ.mol^{? 1} according to the FWO method, respectively and those of 231.3, 240.1 and 243.0 kJ mol^{? 1} at 5°C min^{? 1} according to the Coats-Redfern method, the reaction mechanisms of all the composites was described from the master plots methods and are P_n model for composite C-1, R_n model for composites C-2 and C-3, respectively. It was found that the thermal stability, activation energy and thermal decomposition process changed by the increasing CaCO₃ filler weight in composite structure.     

Kinetics of the decomposition of calcium carbonate in the presence of Bi2O3

Former studies concerning the formation of the compounds in the pseudobinary systems of Bi₂O₃-MO type (M =Ca, Sr, Ca+Sr) have shown that the reaction which occurs with the highest rate is that between Bi₂O₃ and CaO. In the present work CaCO₃ was used as CaO source. We carried out an investigation of the thermal decomposition of CaCO₃ in the presence of Bi₂O₃ in comparison with the decomposition of pure CaCO₃.The presence of Bi₂O₃ exerts a complex influence on the CaCO₃ decomposition acting on the nucleation as well as on the diffusion of CO₂. The decomposition of the samples with low Bi₂O₃ content follows the mechanism of a contracting sphere. A change from surface nucleation to bulk nucleation is recorded for higher amounts of Bi₂O₃.     

A study on the kinetics of thermal decomposition of CaCO3

By means of TG, the thermal decomposition of the powdered CaCO₃ was tested with its various dispersities, range of size, and the different content of CO₂ in flowing nitrogen. Formulae for calculating the rate and time of decomposition were obtained.     

A Practical and Eco-Friendly Method for Conversion of Epoxides to Thiiranes with Immobilized Thiourea on CaCO3

Abstract

Solvent-free conversion of various epoxides to the corresponding thiiranes was carried out efficiently with immobilized thiourea on CaCO₃. The reactions were completed within 1–12 min under oil bath (60 °C–70 °C) conditions to afford thiiranes in 88%–98% yields.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Figures S1–S3.]

GRAPHICAL ABSTRACT      

Application of conduction calorimetry for study of the reactivity of C2S in the system C2S-C4A3¯S-C¯S-H

A conduction calorimeter was used to determine the effect of the ignition temperature on the hydration reactivity of C₂S in the system C₂S-C₄A₃¯S-C¯S relevant to sulphoaluminate belite cement. The results thus obtained showed that the kinetics and mechanism of hydration of the system C₂S-C₄A₃¯S-C¯S are influenced by the temperature of C₂S synthesis. The hydration reactivity of C₂S increases with increasing temperature of ignition.     

Rotation dynamics of C60 molecules in organic superconductor K3C60

The rotation dynamics of C₆₀ molecules in organic superconductor K₃C₆₀ has been investigated from the viewpoint of intramolecular interaction. It is determined that the rotation of C₆₀ at mom temperature has been frozen up within a small region of rotation angle (0°–50°), and pointed out that the reason for the freeze is the physical interaction rather than the geometrical hindrance. The computations of the interactions for alkali-doped compounds A_3-x A′ _x C₆₀ (x = 1, 2, 3; A, A′ = K, Rb, Cs) other than K₃C₆₀ have also been camed out. Fmm the obtained results, it is seen that the superconducting transition temperatures T, are strongly connected with the interactions in them, and this observation is consistent with the discovery of the correlation between T_c, and lattice constants a. Project supported by the National Natural Science Foundation of China.     

Degree of hydration in cement paste and C<Subscript>3</Subscript>A-sodium carbonate-water systems

This research provides a fundamental understanding of the early stage hydration of Portland cement paste, tricalcium aluminate (C₃A) paste at water to cement ratio of 0.5 and C₃A suspension at water to cement ratio of 5.0 modified by 2 or 4 mass% of sodium carbonate. A high conversion of unreacted clinker minerals to gel-like hydration products in the cement-Na₂CO₃ pastes takes place rapidly between 1^st to 24^th h. Contrary the Ca(OH)₂ formation within the same time interval is retarded in the excess of CO₃²⁻ ions due to intensive rise and growth of CaCO₃ crystals in hydrated cement. Later, the conversion of clinker minerals to the hydrate phase is reduced and higher contents of calcite and vaterite relative to that of Ca(OH)₂ in comparison with those found in the Portland cement paste are observed. As a consequence a decrease in strength and an increase in porosity between hardened Portland cement paste without sodium carbonate and those modified by Na₂CO₃ are observed. C₃A hydrates very quickly with sodium carbonate between 1^st and 24^th h forming hydration products rich in bound water and characterized also by complex salts of (x)C₃A·(y)CO₂·(zH₂O type, whereas C₃A-H₂O system offers C₃AH₆ as the main hydration product. Higher content of the formed calcium aluminate hydrates in C₃A-Na₂CO₃-H₂O system also contributes to early strength increase of Portland cement paste.     

Inclusion properties of 3-fluoromesotetraphenylporphyrin with C60 and C70

To improve the selectivity ratio of C70 over C60, a new designer molecule, viz., 3-fluoromesotetraphenylporphyrin (1) has been reported in the present investigations. Fluorescence studies reveal that the Q-absorption band of 1 gets sufficient quenching effect upon addition of both C60 and C70. Binding constants (K) of the C60/1 and C70/1 complexes are estimated to be 580 and 10,800 dm3 mol(-1), respectively. Thus, K(C70)/K(C60) is approximately 19 which is very large and even comparable with other macrocyclic host molecules like calix[5]arene, azacalix[m]arene[n]pyridine, cyclotriveratrylenophane and calixarene bisporphyrin. 1H NMR chemical shift measurements show that the -NH- proton of 1 suffers more shifts in presence of C70 compared to C60. This finding also offers a good support in favor of high K value for C70/1 complex as well as large selectivity ratio of C70 over C60.     

Preparation of poly(methyl methacrylate)/CaCO3/SiO2 composite particles via emulsion polymerization

A novel method to prepare organic/inorganic composite particles, i.e. poly(methyl methacrylate)/CaCO₃/SiO₂ three-component composite particles, using emulsion polymerization of methyl methacrylate with sodium lauryl sulfate as a surfactant in an aqueous medium was reported. CaCO₃/SiO₂ two-component inorganic composite particles were obtained firstly by the reaction between Na₂CO₃ and CaCl₂ in porous silica (submicrometer size) aqueous sol and the specific surface area of the particles was measured by the Brunauer–Emmett–Teller (BET) method. The results show that the BET specific surface area of the CaCO₃/SiO₂ composite particle is much smaller than that of the silica particle, indicating that CaCO₃ particles were adsorbed by porous silica and that two-component inorganic composite particles were formed. Before copolymerization with methyl methacrylate, the inorganic composite particles were coated with a modifying agent through covalent attachment. The chemical structures of the poly(methyl methacrylate)/CaCO₃/SiO₂ composite particles obtained were characterized by Fourier transform IR spectroscopy and thermogravimetric analysis. The results show that the surface of the modified inorganic particles is grafted by the methyl methacrylate molecules and that the grafting percentage is about 15.2%.     

PAMAM树形分子对CaCO3结晶影响的研究

研究了不同端基的聚酰胺胺(PAMAM)树形分子对CaCO₃在水溶液中结晶的影响。分别利用傅立叶变换红外光谱(FTIR)、X-射线衍射(XRD)、扫描电镜(SEM)等测试手段对样品进行了分析。结果表明:没有树形分子存在时CaCO₃是粒径为10μm的菱形方解石晶体;端基为-COONa的树形分子存在时CaCO₃则是粒径为1～2μm的球形球霰石晶体;-COOCH₃端基PAMAM树形分子存在时得到的CaCO_{3相似文献}   

Kristallstruktur und Infrarot-Absorptionsspektrum von synthetischem Monohydrocalcit,CaCO3·H2O

The crystal structure of synthetic monohydrocalcite was solved withPatterson andFourier syntheses and refined for the subcell withá=6.0931 (9) Å,=7.5446 (18) Å, space group P3₁21 or P3₂21,Z=3 toR _w=0.039. Very weak superstructure reflections define a cell with andc=, space group P3₁ or P3₂,Z=9. The superstructure result from ordering of the CO₃ groups and was refined with rigid carbonate groups toR _w=0.086. The interpretation of the IR spectrum is in agreement with the results of the X-ray structure analysis.

     

活性聚苯乙烯膜诱导碳酸钙异相成核结晶

0引言生物矿物材料(如骨、牙齿、贝壳等)的优异性能[1]使得无机材料的仿生合成(又称有机模板合成)成为近年来研究的热点之一[2]。该合成技术的优点是,通过有机物分子与无机离子的相互作用,能够在温和的条件下合成出具有多级结构、特殊形貌和优异性能的有机/无机复合材料。CaCO3     

DC dielectric study of polyethylene/CaCO3 composites

The dielectric properties of composite samples prepared by polymerizing ethylene on the surface of filler are compared to those of mechanical mixtures consisting of CaCO₃ and ultra high molecular weight polyethylene. After presenting the normalized master curves of AC dispersion and loss measured at different relative humidities, the field strength dependence of the 50 Hz AC and DC responses were studied. With one exception, the effect is small. Thermally stimulated polarization (TSP) and depolarization (TSD) curves are presented; the peak appearing on the TSP curves of the samples stored under ambient conditions is interpreted as a result of water desorption. The high temperature DC conductivity and the depolarization current density are higher in the composites and mechanical mixtures than in the matrix. The dielectric properties of the wet filler particles were calculated from the measured composite and matrix data using various mixture formulae. The results can be understood and interpreted if the dielectric properties of adsorbed water are described by the cluster theory of dielectric relaxation.     

PVP为模板控制合成球形碳酸钙

Spherical calcium carbonate was prepared by the reaction of sodium carbonate with calcium chloride at the presence of a protein-like molecule， polyvinylpyrrolidone， as the template. The products were characterized by elemental analyses， XRD， SEM， and TG-DSC respectively. The effects of polyvinylpyrrolidone on the crystal form and morphology of the as-prepared CaCO₃ were investigated. It was found that the aggregative shape of the produced calcium carbonate crystalline could be well controlled by adjusting the concentration of the polyvinylpyrrolidone template. This may be of important meanings to the biomimetic synthesis of novel inorganic materials.     

W/O、O/W型卵磷脂乳状液对CaCO3晶型的影响

Ｗ／Ｏ、Ｏ／Ｗ型卵磷脂乳状液对ＣａＣＯ３晶型的影响姚松年＊缪炜童华张操墨熊海涛（武汉大学分析测试科学系，武汉４３００７２）关键词：卵磷脂乳状液ＣａＣＯ３碳酸钙可以方解石、霰石、球霰石、胶状碳酸钙等形态存在且依次稳定性降低。珍珠是生物矿化产物，除氨基酸...     

球形碳酸钙复合物的红外、拉曼光谱分析研究

碳酸钙属ABO3，类的多型晶体，因堆积方式不同，以方解石型、文石型、球霰石型和非晶态等多种形式存在。作为填充型材料，碳酸钙广泛应用于塑料、橡胶、造纸、油墨、医药等行业，是一种具有重要经济价值的无机材料。关于CaCO3，的红外光谱研究报道较为丰富，Andersen等的研究比较全面和深入。而关于CaCO3的拉曼光谱研究相对较少，Gabrielli的工作组在这方面有较多的研究报道?     

Chemical mechanisms in C3F8-H2 radiofrequency discharges

Discharges fed with C₃F₈-H₂ mixtures have been studied by means of mass spectrometry in a tubular reactor operated at 0.5 torr and 50 W. Comparison of the results with those obtained with emission actinometry give additional evidence that emission actinometry and mass spectrometry are powerful diagnostic tools to monitor stable and unstable species in discharges utilized for dry etching and polymer depositions. Mechanisms for end product formation and polymer deposition are also discussed.     

Influence of Polymer Coated CaCO3 on Vulcanization Kinetics of Natural Rubber/Sulfur/N-Oxydiethyl Benzthiazyl Sulfenamide (BSM) System

The effect of polymethyl methacrylate (PMMA)-encapsulated calcium carbonate on the kinetics of the vulcanization of natural rubber (NR) with a vulcanizing agent (sulfur) accelerated by N-oxydiethyl benzthiazyl sulfenamide (BSM) has been studied. The PMMA coating (4% by weight of CaCO₃) was prepared by dispersion polymerization, and compositions of five NR composites were 10, 15, 20 phr of treated CaCO₃ and 20 and 40 phr of untreated CaCO₃. The vulcanization kinetics was determined by oscillating disc rheometry (ODR) and the kinetic parameters were determined by the model equations. The kinetic analysis suggests that the two-parameter auto catalytic model is the more appropriate one to elucidate the kinetics of the vulcanizing reaction of the present system. These parameters support the nature of the experimental ODR curves (degree of conversion–time plots). The encapsulated CaCO₃ leads to a change in vulcanization reaction and has an effect on the kinetic parameters E, ln K₀, m and n, and consequently on the overall reactivity.