Phenylboronic Acid Appended Pyrene‐Based Low‐Molecular‐Weight Injectable Hydrogel: Glucose‐Stimulated Insulin Release

A pyrene‐containing phenylboronic acid (PBA) functionalized low‐molecular‐weight hydrogelator was synthesized with the aim to develop glucose‐sensitive insulin release. The gelator showed the solvent imbibing ability in aqueous buffer solutions of pH values, ranging from 8–12, whereas the sodium salt of the gelator formed a hydrogel at physiological pH 7.4 with a minimum gelation concentration (MGC) of 5 mg mL^?1. The aggregation behavior of this thermoreversible hydrogel was studied by using microscopic and spectroscopic techniques, including transmission electron microscopy, FTIR, UV/Vis, luminescence, and CD spectroscopy. These investigations revealed that hydrogen bonding, π–π stacking, and van der Waals interactions are the key factors for the self‐assembled gelation. The diol‐sensitive PBA part and the pyrene unit in the gelator were judiciously used in fluorimetric sensing of minute amounts of glucose at physiological pH. The morphological change of the gel due to addition of glucose was investigated by scanning electron microscopy, which denoted the glucose‐responsive swelling of the hydrogel. A rheological study indicated the loss of the rigidity of the native gel in the presence of glucose. Hence, the glucose‐induced swelling of the hydrogel was exploited in the controlled release of insulin from the hydrogel. The insulin‐loaded hydrogel showed thixotropic self‐recovery property, which hoisted it as an injectable soft composite. Encouragingly, the gelator was found to be compatible with HeLa cells.     

Supramolecular Hydrogels Based on L‐Phenylalanine Derivatives with a Positively Charged Terminal Group

A new hydrogelator based on L ‐phenylalanine with a long hydrophobic chain and positively charged terminus was synthesized, and its gelation behavior in H₂O was investigated. Polarized optical microscopy (POM), field emission scanning electron microscopy (FE‐SEM), and X‐ray diffraction (XRD) results indicate that the hydrogelator self‐assembles into fibres‐like aggregates which then lead to the formation of a hydrogel. ¹H‐NMR and CD spectra of hydrogels and aqueous solution revealed that intermolecular H‐bonding between the amide groups was the driving force for gelation. A luminescence study, in which ANS (8‐anilinonaphthalene‐1‐sulfonic acid) was used as a probe, indicated that the hydrophobic interactions between long chains were the driving force for gelation. Consequently, it was proved that the hydrogelator self‐assembles into fibre‐like aggregates and then forms supramolecular hydrogels through the H‐bonding and hydrophobic interactions.     

New Low‐Molecular‐Mass Gelators Based on L‐Lysine: Amphiphilic Gelators and Water‐Soluble Organogelators

The new L ‐lysine alkali‐metal salts 1 – 5 (M⁺=Na⁺ and K⁺) with different alkyl groups at the N^α‐position were easily synthesized, and their hydro‐ and organogelation properties were investigated. All compounds were H₂O‐soluble, and some salts, especially the potassium salts, functioned as a hydrogenator that could gel water below 2 wt‐%. These salts also had organogelation abilities for many organic solvents.     

Intramolecular Hydrogen Bonds in Low‐Molecular‐Weight Polyethylene Glycol

We used static DFT calculations to analyze, in detail, the intramolecular hydrogen bonds formed in low‐molecular‐weight polyethylene glycol (PEG) with two to five repeat subunits. Both red‐shifted O?H???O and blue‐shifting C?H???O hydrogen bonds, which control the structural flexibility of PEG, were detected. To estimate the strength of these hydrogen bonds, the quantum theory of atoms in molecules was used. Car–Parrinello molecular dynamics simulations were used to mimic the structural rearrangements and hydrogen‐bond breaking/formation in the PEG molecule at 300 K. The time evolution of the H???O bond length and valence angles of the formed hydrogen bonds were fully analyzed. The characteristic hydrogen‐bonding patterns of low‐molecular‐weight PEG were described with an estimation of their lifetime. The theoretical results obtained, in particular the presence of weak C?H???O hydrogen bonds, could serve as an explanation of the PEG structural stability in the experimental investigation.     

Multiscale Dewetting of Low‐Molecular‐Weight Block Copolymer Ultrathin Films

Ultrathin films of a low‐molecular‐weight block copolymer spontaneously dewet after several days at ambient temperature. Film rupture produces macroscopic holes and a residual pancake brush layer ≈ 2 nm thick with intermittent mounds measuring up to 25 nm in thickness. Multiscale dewetting likewise occurs when the films are heated and returned to ambient temperature. Regardless of the surface pattern that forms during heating, submicron mounds develop on the dewetted copolymer film, and fine holes emerge along the substrate surface, after cooling.     

Access to Metastable Gel States Using Seeded Self‐Assembly of Low‐Molecular‐Weight Gelators

Here we report on how metastable supramolecular gels can be formed through seeded self‐assembly of multicomponent gelators. Hydrazone‐based gelators decorated with non‐ionic and anionic groups are formed in situ from hydrazide and aldehyde building blocks, and lead through multiple self‐sorting processes to the formation of heterogeneous gels approaching thermodynamic equilibrium. Interestingly, the addition of seeds composing of oligomers of gelators bypasses the self‐sorting processes and accelerates the self‐assembly along a kinetically favored pathway, resulting in homogeneous gels of which the network morphologies and gel stiffness are markedly different from the thermodynamically more stable gel products. Importantly, over time, these metastable homogeneous gel networks are capable of converting into the thermodynamically more stable state. This seeding‐driven formation of out‐of‐equilibrium supramolecular structures is expected to serve as a simple approach towards functional materials with pathway‐dependent properties.     

Intercalation Study of Low‐Molecular‐Weight Hyperbranched Polyethyleneimine into Graphite Oxide

We report for the first time the intercalation of low‐molecular‐weight hyperbranched polyethyleneimine (PEI) into graphite oxide (GO) for the facile, bulk synthesis of novel graphene‐based hybrid (GO‐PEI) materials exhibiting tailored interlayer galleries. The size of the intercalant as well as the loading in GO were systematically investigated to determine their contribution to the basal spacing of the resulting materials. Powder X‐ray diffraction measurements demonstrated the generation of constrained hybrid systems along the c axis that exhibit considerably increased interlayer distances compared with the starting, pristine GO. The results of X‐ray photoelectron and FTIR studies are consistent with a “grafting‐to” process of the intercalated PEI with the oxygen functional groups present along the GO framework. Furthermore, it was found that a great number of the nitrogen‐containing groups in PEI still remain available within the newly formed, confined micro‐environment of intercalated GO galleries. The increased surface area of the GO‐PEI hybrids in conjunction with the remaining available active groups of intercalated PEI render the synthesised hybrids very attractive candidates as nanostructured adsorbents.     

Development of C3‐Symmetric Tris‐Urea Low‐Molecular‐Weight Gelators

This article describes recent developments in C₃‐symmetric tris‐urea low‐molecular‐weight gelators and their applications. The C₃‐symmetric tris‐ureas are excellent frameworks to form supramolecular polymers through noncovalent interactions. In organic solvents, hydrophobic tris‐ureas form supramolecular gels. Amphiphilic tris‐ureas form supramolecular gels in aqueous media. Functional supramolecular gels were prepared by introducing appropriate functional groups into the outer sphere of tris‐ureas. Supramolecular hydrogels obtained from amphiphilic tris‐ureas were used in the electrophoresis of proteins. These electrophoreses results showed several unique characteristics compared to typical electrophoreses results obtained using polyacrylamide matrices.

     

Voltammetric Determination of Low‐Molecular‐Weight Sulfur Compounds in Hydrothermal Vent Fluids – Studies with Hydrogen Sulfide,Methanethiol, Ethanethiol and Propanethiol

Determination of sulfide compounds in hydrothermal vent fluid samples was performed by DPCSV. The methodology was applied to speciate sulfides via primitive and first‐derivative curve interpretation. Hydrogen sulfide, methanethiol, and propanethiol were simultaneously assayed in samples containing no ethanethiol. In the presence of ethanethiol, the organic sulfides were determined without speciation. Sulfides were determined in an acidic electrolyte, and detection limits ranging from 0.1 to 1.1 μmol L^?1 were calculated. The method was tested in real hydrothermal vent fluid samples, with recoveries ranging from 86.9% (R–SH) to 115.3% (H₂S). Interference of the metallic species present in seawater was investigated.     

Induction of Strong and Tunable Circularly Polarized Luminescence of Nonchiral,Nonmetal, Low‐Molecular‐Weight Fluorophores Using Chiral Nanotemplates

A new strategy is described for generating strong circularly polarized luminescence with highly tunable emission bands through chiral induction in nonchiral, totally organic, low‐molecular‐weight fluorescent dyes by chiral nanotemplate systems. Our approach allows the first systematic investigation to clarify the correlation between the circular dichroism and circularly polarized luminescence intensities. As a result, a dilute solution system with the highest circularly polarized luminescence intensity achieved to date and a dissymmetry factor of over 0.1 was identified.     

Induction of Strong and Tunable Circularly Polarized Luminescence of Nonchiral,Nonmetal, Low‐Molecular‐Weight Fluorophores Using Chiral Nanotemplates

A new strategy is described for generating strong circularly polarized luminescence with highly tunable emission bands through chiral induction in nonchiral, totally organic, low‐molecular‐weight fluorescent dyes by chiral nanotemplate systems. Our approach allows the first systematic investigation to clarify the correlation between the circular dichroism and circularly polarized luminescence intensities. As a result, a dilute solution system with the highest circularly polarized luminescence intensity achieved to date and a dissymmetry factor of over 0.1 was identified.     

Multistimuli‐Responsive Supramolecular Organogels Formed by Low‐Molecular‐Weight Peptides Bearing Side‐Chain Azobenzene Moieties

This work demonstrates that the incorporation of azobenzene residues into the side chain of low‐molecular‐weight peptides can modulate their self‐assembly process in organic solvents leading to the formation of stimuli responsive physical organogels. The major driving forces for the gelation process are hydrogen bonding and π–π interactions, which can be triggered either by thermal or ultrasound external stimuli, affording materials having virtually the same properties. In addition, a predictive model for gelation of polar protic solvent was developed by using Kamlet–Taft solvent parameters and experimental data. The obtained viscoelastic materials exhibited interconnected multistimuli responsive behaviors including thermal‐, photo‐, chemo‐ and mechanical responses. All of them displayed thermoreversability with gel‐to‐sol transition temperatures established between 33–80 °C and gelation times from minutes to several hours. Structure–property relationship studies of a designed peptide library have demonstrated that the presence and position of the azobenzene residue can be operated as a versatile regulator to reduce the critical gelation concentration and enhance both the thermal stability and mechanical strength of the gels, as demonstrated by comparative dynamic rheology. The presence of N‐Boc protecting group in the peptides showed also a remarkable effect on the formation and properties of the gels. Despite numerous examples of peptide‐based gelators known in the literature, this is the first time in which low‐molecular‐weight peptides bearing side chain azobenzene units are used for the synthesis of “intelligent” supramolecular organogels. Compared with other approaches, this strategy is advantageous in terms of structural flexibility since it is compatible with a free, unprotected amino terminus and allows placement of the chromophore at any position of the peptide sequence.     

Amino Acid Based Low‐Molecular‐Weight Ionogels as Efficient Dye‐Adsorbing Agents and Templates for the Synthesis of TiO2 Nanoparticles

The gelation of ionic liquids is attracting significant attention because of its large spectrum of applications across different disciplines. These ‘green solvents’ have been the solution to a number of common problems due to their eco‐friendly features. To expand their applications, the gelation of ionic liquids has been achieved by using amino acid‐based low‐molecular‐weight compounds. Variation of individual segments in the molecular skeleton of the gelators, which comprise the amino acid and the protecting groups at the N and C termini, led to an understanding of the structure–property correlation of the ionogelation process. An aromatic ring containing amino acid‐based molecules protected with a phenyl or cyclohexyl group at the N terminus were efficient in the gelation of ionic liquids. In the case of aliphatic amino acids, gelation was more prominent with a phenyl group as the N‐terminal protecting agent. The probable factors responsible for this supramolecular association of the gelators in ionic liquids have been studied with the help of field‐emission SEM, ¹H NMR, FTIR, and luminescence studies. It is the hydrophilic–lipophilic balance that needs to be optimized for a molecule to induce gelation of the green solvents. Interestingly, to maximize the benefits from using these green solvents, these ionogels have been employed as templates for the synthesis of uniform‐sized TiO₂ nanoparticles (25–30 nm). Furthermore, as a complement to their applications, ionogels serve as efficient adsorbents of both cationic and anionic dyes and were distinctly better relative to their organogel counterparts.     

Low‐Molecular‐Weight Dendrons for DNA Binding and Release by Reduction‐Triggered Degradation of Multivalent Interactions

Losing the grip : The synthesis of multivalent low‐molecular‐weight dendrons with lysine branching units coupled to disulfide‐linked spermine surface groups is described. It is furthermore demonstrated that the dendrons bind DNA with good affinity (see image), but are also able to release the DNA in a reductive environment.

     

Control of Stem‐Cell Behavior by Fine Tuning the Supramolecular Assemblies of Low‐Molecular‐Weight Gelators

Controlling the behavior of stem cells through the supramolecular architecture of the extracellular matrix remains an important challenge in the culture of stem cells. Herein, we report on a new generation of low‐molecular‐weight gelators (LMWG) for the culture of isolated stem cells. The bola‐amphiphile structures derived from nucleolipids feature unique rheological and biological properties suitable for tissue engineering applications. The bola‐amphiphile‐based hydrogel scaffold exhibits the following essential properties: it is nontoxic, easy to handle, injectable, and features a biocompatible rheology. The reported glycosyl‐nucleoside bola‐amphiphiles (GNBA) are the first examples of LMWG that allow the culture of isolated stem cells in a gel matrix. The results (TEM observations and rheology) suggest that the supramolecular organizations of the matrix play a role in the behavior of stem cells in 3D environments.     

Pathway‐Dependent Melting in a Low‐Molecular‐Weight Polyethylene‐block‐Poly(ethylene oxide) Diblock Copolymer

Summary: In a low‐molecular‐weight polyethylene‐block‐poly(ethylene oxide) (PE‐b‐PEO) diblock copolymer, two pathway‐dependent melting processes were observed: Upon slow heating, the PE lamellar crystals melted at ≈97 °C into a disordered state. However, when the temperature rapidly jumped to above the melting point (e.g., 100 °C), the PE lamellar crystals transformed directly into an ordered lamellar melt, followed by an isothermal conversion into a disordered melt. This isothermal order‐to‐disorder transition was explained by superheating of the PE crystals using a G‐T diagram.

A schematic G‐T diagram explaining the pathway‐dependent double melting for a crystalline polyethylene‐block‐poly(ethylene oxide) copolymer.