Evaluation of Some Redox Mediators in the Design of Reagentless Amperometric Glucose Biosensor

The influence of redox mediators (tetrathiafulvalene (TTF), tetrathiafulvalene‐tetracyanoquinodimethane complex (TTF‐TCNQ), phenazine methosulfate (PMS), 5,6‐diamino‐1,10‐phenonthroline (5,6‐DAP), potassium ferrocyanide (K4[Fe(CN)6]), methylene blue (MB) and toluidine blue (TB)) on the response of amperometric glucose biosensor was investigated in this research. Graphite rod electrode (GRE) modified by adsorbed mediator and glucose oxidase (GOx) cross‐linked with glutaraldehyde was served as working electrode. The highest amperometric signals were observed by using TTF and TTF‐TCNQ as mediators. The impact of amount of immobilized GOx, an optimal pH region for operation, stability and reproducibility of the analytic signal of designed biosensor using these mediators were investigated and discussed.     

A Novel Amperometric Hydrogen Peroxide Biosensor Based on Horseradish Peroxidase Incorporated in Organically Modified Sol-Gel Glass Matrix/Graphite Paste with Multiwalled Carbon Nanotubes

We herein report an electrochemical hydrogen peroxide sensor based on horseradish peroxidase immobilized in organically modified sol-gel glass (ormosil) with mediator ferricyanide along with multiwalled carbon nanotubes (mwcnts). The ormosil material is converted to fine powder followed by incorporation within graphite paste electrode. The electrochemistry of redox materials encapsulated within ormosil has been studied. The requirement of mwcnts is examined. The ormosil prepared with optimum concentration of mwcnts shows better redox electrochemistry as compared to that made without mwcnts. The biosensor has been characterized by cyclic voltammetry and chroanoamperometry. The performance, stability, and reproducibility of a new peroxide biosensor are reported.     

Electrochemical polymerization of aniline over tetracyanoquinodimethane encapsulated ormosil matrix: application in the electrocatalytic oxidation of ascorbic acid and acetylthiocholine

Organically modified sol-gel glass (ormosil) matrix is utilized as a template for the electrochemical polymerization of aniline. The ormosil matrix is further modulated by encapsulation of: (a) tetracyanoquinodimethane (TCNQ), and (b) tetracyanoquinodimethane together with palladium (Pd). The presence of tetracyanoquinodimethane within ormosil matrix considerably influences the polymerization process of aniline and the same is significantly enhanced as compared to that of control. The presence of palladium within ormosil network further influence the polymerization process as compared to that of TCNQ only. The polyaniline obtained as PAni-TCNQ and PAni-TCNQ-Pd composites has been utilized for fabricating the modified electrodes. These modified electrodes are used to study the electrochemical sensing of ascorbic acid and acetylthiocholine. The results based on cyclic voltammetry, differential pulse voltammetry and amperometry justify that the electrode material exhibits excellent electrocatalytic activity for the oxidation of ascorbic acid and acetylthiocholine with major findings as compared to the control: (1) a negative shift to the order of ～340 mV vs. Ag/AgCl in the anodic overpotential for the electro-oxidation of ascorbic acid, (2) a significant increase in the anodic peak current for the oxidation of ascorbic acid, (3) an increase in the sensitivity of ascorbic acid analysis to the order of 7-fold for the modified electrodes, (4) acetylthiocholine undergoes direct oxidation with considerable increase in both anodic and cathodic peak currents and (5) an increase in the sensitivity of acetylthiocholine analysis to the order of 5-fold for the modified electrodes.     

A Lactulose Bienzyme Biosensor Based on Self‐Assembled Monolayer Modified Electrodes

A bienzyme biosensor in which the enzymes β‐galactosidase (β‐Gal), fructose dehydrogenase (FDH), and the mediator tetrathiafulvalene (TTF) were coimmobilized by cross‐linking with glutaraldehyde atop a 3‐mercaptopropionic acid (MPA) self‐assembled monolayer on a gold disk electrode, is reported. The working conditions selected were E_app=+0.10 V and (25±1) °C. The useful lifetime of one single TTF‐β‐Gal‐FDH‐MPA‐AuE was surprisingly long, 81 days. A linear calibration plot was obtained for lactulose over the 3.0×10^?5–1.0×10^?3 mol L^?1 concentration range, with a limit of detection of 9.6×10^?6 mol L^?1. The effect of potential interferents (lactose, glucose, galactose, sucrose, and ascorbic acid) on the biosensor response was evaluated. The behavior of the SAM‐based biosensor in flow‐injection systems in connection with amperometric detection was tested. The analytical usefulness of the biosensor was evaluated by determining lactulose in a pharmaceutical preparation containing a high lactulose concentration, and in different types of milk. Finally, the analytical characteristics of the TTF‐β‐Gal‐FDH‐MPA‐AuE are critically compared with those reported for other recent enzymatic determinations of lactulose.     

A TTF–TCNQ Electrode as a Voltammetric Analogue of an Ion‐Selective Electrode

A TTF‐TCNQ/PVC composite electrode is proposed as a voltammetric cation and anion sensor. The electrode relies on the principle that, during redox processes involving the TCNQ^0/? couple for cations and the TTF^+/0 couple for anions, electrolyte ions are included into lattice sites in the charge neutralization process. This voltammetric ion‐sensor provides results that are similar to those of sensors based on two electrodes (viz. one modified with TCNQ for cations and another modified with TTF for anions) but with some practical advantages over them.     

NADH Electrocatalytic Oxidation on Gold Nanoparticle‐Modified PVC/TTF‐TCNQ Composite Electrode. Application as Amperometric Sensor

We herein report on the electrocatalytic activity towards the oxidation of NADH of a PVC/TTF‐TCNQ composite electrode modified with gold nanoparticles. This electrocatalytic property allows proposing this system as a new alternative for amperometric determination of NADH, without need to add another mediator. The sensor shows a linear response to NADH over a concentration range from 5.0×10^?6 M up to 5.0×10^?4 M, with a sensitivity of 11.22±0.5 mA M^?1 and a detection limit (S/N=3) of 4.0×10^?6 M for measurements in batch and similar data in FIA.     

Amperometric Glucose Biosensor Based on Platinum Nanoparticles Combined Aligned Carbon Nanotubes Electrode

A sensitive amperometric glucose biosensor based on platinum nanoparticles (PtNPs) combined aligned carbon nanotubes (ACNTs) electrode was investigated. PtNPs which can enhance the electrocatalytic activity of the electrode for electrooxidating hydrogen peroxide by enzymatic reaction were electrocrystallized on 4‐aminobenzene monolayer‐grafted ACNTs electrode by potential‐step method. These PtNPs combined ACNTs' (PtNPs/ACNTs) surfaces were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The highly dispersed PtNPs on ACNTs can be obtained. The enzyme electrode exhibits excellent response performance to glucose with linear range from 1×10^?5–7×10^?3 mol L^?1 and fast response time within 5 s. Furthermore, this glucose biosensor also has good reproducibility. It is demonstrated that the PtNPs/ACNTs electrode with high electrocatalytic activity is a suitable basic electrode for preparing enzyme electrodes.     

Donor–acceptor complex of a new bis‐TTF donor containing a pyridine diester spacer with TCNQ as the acceptor: a disappointing system

A new bis‐TTF donor (TTF is tetrathiafulvalene) containing a pyridine diester spacer, namely bis{2‐[(6,7‐tetramethylene‐3‐methylsulfanyltetrathiafulvalen‐2‐yl)sulfanyl]ethyl} pyridine‐2,6‐dicarboxylate–tetracyanoquinodimethane–dichloromethane (2/1/2), 2C₃₃H₃₃NO₄S₁₂·C₁₂H₄N₄·2CH₂Cl₂, has been synthesized and its electron‐donating ability determined by cyclic voltammetry. The electrical conductivity and crystal structure of this donor–acceptor (DA) complex with TCNQ (tetracyanoquinodimethane) as the acceptor are presented. The TCNQ moiety lies across a crystallographic inversion centre. In the crystal structure, TTF and TCNQ entities are arranged in alternate stacks; this feature, together with the bond lengths of the TCNQ molecule, suggest that the expected charge transfer has not occurred and that the D and A entities are in the neutral state, in agreement with the poor conductivity of the material (σ_RT = 2 × 10⁻⁶ S cm⁻¹).     

Analytical Biosensing of Hydrogen Peroxide on Brilliant Cresyl Blue/Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrode

A cationic quinine‐imide dye brilliant cresyl blue (BCB) and horseradish peroxidase (HRP) were co‐immobilized within ormosil on multiwalled carbon nanotubes modified glassy carbon electrode for the fabrication of highly sensitive and selective hydrogen peroxide biosensor. The presence of epoxy group in ormosil as organic moiety improves the mechanical strength and transparency of the film and amino group provides biocompatible microenvironment for the immobilization of enzyme. The presence of MWCNTs improved the conductivity of the nanocomposite film. The surface characterization of MWCNT modified ormosil nanocomposite film was performed with scanning electron microscopy (SEM) and atomic force microscopy (AFM). Cyclic voltammetry and amperometry measurements were used to study and optimize the performance of the resulting peroxide biosensor. The apparent Michaelis–Menten constant was determined to be 1.5 mM. The proposed H₂O₂ biosensor exhibited wide linear range from 3×10^?7 to 1×10^?4 M, and low detection limit 1×10^?7 M (S/N=3) with fast response time <5 s. The probable interferences in bio‐matrix were selected to test the selectivity and no significant response was observed in the biosensor. This biosensor possessed good analytical performance and long term storage stability.     

Conductive Nanoscopic Fibrous Assemblies Containing Helical Tetrathiafulvalene Stacks

Tetrathiafulvalenes (TTF) S‐TTF and R‐TTF having four chiral amide end groups self‐organize into helical nanofibers in the presence of 2,3,5,6‐tetrafluoro‐7,7′,8,8′‐tetracyano‐p‐quinodimethane (F₄TCNQ). The intermolecular hydrogen bonding among chiral amide end groups and the formation of charge‐transfer complexes results in a long one‐dimensional supramolecular stacking, and the chirality of the end groups affects the molecular orientation of TTF cores within the stacks. Electronic conductivity of a single helical nanoscopic fiber made of S‐TTF and F₄TCNQ is determined to be (7.0±3.0)×10^?4 S cm^?1 by point‐contact current‐imaging (PCI) AFM measurement. Nonwoven fabric composed of helical nanofibers shows a semiconducting temperature dependence with an activation energy of 0.18 eV.     

Amperometric Glucose Biosensor Based on Pt‐Pd Nanoparticles Supported by Reduced Graphene Oxide and Integrated with Glucose Oxidase

A novel glucose biosensor was developed based on the immobilization of glucose oxidase (GOx) on reduced graphene oxide incorporated with electrochemically deposited platinum and palladium nanoparticles (PtPdNPs). Reduced graphene oxide (RGO) was more hybridized by chemical and heat treatment. Bimetallic nanoparticles were deposited electrochemically on the RGO surface for potential application of the Pd? Pt alloy in biosensor preparation. The as‐prepared hybrid electrode exhibited high electrocatalytic activities toward H₂O₂, with a wide linear response range from 0.5 to 8 mM (R²=0.997) and high sensitivity of 814×10^?6 A/mMcm². Furthermore, glucose oxidase with active material was integrated by a simple casting method on the RGO/PdPtNPs surface. The as‐prepared biosensor showed good amperometric response to glucose in the linear range from 2 mM to 12 mM, with a sensitivity of 24×10^?6 A/mMcm², a low detection limit of 0.001 mM, and a short response time (5 s). Moreover, the effect of interference materials, reproducibility and the stability of the sensor were also investigated.     

Biosensor Based on Self‐Assembling Glucose Oxidase and Dendrimer‐Encapsulated Pt Nanoparticles on Carbon Nanotubes for Glucose Detection

A novel amperometric glucose biosensor based on layer‐by‐layer (LbL) electrostatic adsorption of glucose oxidase (GOx) and dendrimer‐encapsulated Pt nanoparticles (Pt‐DENs) on multiwalled carbon nanotubes (CNTs) was described. Anionic GOx was immobilized on the negatively charged CNTs surface by alternatively assembling a cationic Pt‐DENs layer and an anionic GOx layer. Transmission electron microscopy images and ζ‐potentials proved the formation of layer‐by‐layer nanostructures on carboxyl‐functionalized CNTs. LbL technique provided a favorable microenvironment to keep the bioactivity of GOx and prevent enzyme molecule leakage. The excellent electrocatalytic activity of CNTs and Pt‐DENs toward H₂O₂ and special three‐dimensional structure of the enzyme electrode resulted in good characteristics such as a low detection limit of 2.5 μM, a wide linear range of 5 μM–0.65 mM, a short response time (within 5 s), and high sensitivity (30.64 μA mM^?1 cm^?2) and stability (80% remains after 30 days).     

All-valence-electron band structures of infinite stacked poly(TCNQ) and poly(TTF) chains

We have computed the energy band structures of the inifite poly(TCNQ), poly(TCNQ^2?), poly(TTF) and poly(TTF²⁺) chains using the CNDO/2 and where possible the MINDO/2 crystal orbital approximation schemes. The results show a broad conduction band for poly(TCNQ) and a broad valence band for poly(TTF). The bandwidths within the MINDO/2 CO scheme are found to be smaller by roughly a factor of $\text{1}\text{2}$ as compared with those found within the CNDO/2 CO scheme. Our findings are in agreement with a bandwidth of 0.4–0.5 eV for the conduction band of TCNQ—TTF crystals as found by experiments. A brief discussion is given of the k-dependence of the physically interesting bands which is not always simple.     

Highly Sensitive Amperometric Glucose Biosensor Based on Glassy Carbon Electrode with Copper/Palladium Coating

A highly sensitive amperometric glucose biosensor based on immobilizing glucose oxidase in electropolymerized poly(o‐phenylenediamine) film on glassy carbon electrode coated sequentially with copper and palladium layers has been developed. The steady‐state amperometric response to glucose was determined by means of the oxidation of hydrogen peroxide generated by the enzymatic reaction at a potential of either +0.70 or +0.40 V (vs. Ag|AgCl reference). The deposited copper/palladium layer showed great enhancement in the performance of the enzyme electrode, possibly due to its better electrocatalytic activity for hydrogen peroxide oxidation and large surface area. Effects of the relative loading of palladium, enzyme and polymer on the electrode performance were examined in detail. Sensitivity and detection limit for glucose determinations at +0.70 V were about 7.3 μA/mM and 0.1 μM, respectively. A wide linear range up to 6.0 mM glucose could be achieved. Electrode performance was superior to similar works reported in the literature. The response time was less than 2 s and its lifetime was longer than three months. The permeable polyphenylenediamine film also offered good anti‐interference ability to ascorbic acid, uric acid and acetaminophen, especially when a detection potential of +0.40 V was employed.     

A novel nanocomposite matrix based on graphene oxide and ferrocene-branched organically modified sol–gel/chitosan for biosensor application

A novel platform for the fabrication of a glucose biosensor was successfully constructed by entrapping glucose oxidase (GOD) in a ferrocene (Fc)-branched organically modified silica material (ormosil)/chitosan (CS)/graphene oxide (GO) nanocomposite. The morphology, structure, and electrochemistry of the nanocomposite were characterized by transmission electron microscopy, X-ray powder diffraction, UV–vis spectroscopy, Fourier transform infrared spectroscopy, and electrochemical techniques. Results demonstrated that the proposed electrochemical platform not only provided an excellent microenvironment to maintain the bioactivity of the immobilized enzyme, but also effectively prevented the leakage of both the enzyme and mediator from the matrix and retained the electrochemical activity of Fc. Furthermore, dispersing GO within the Fc-branched ormosil/CS matrix could significantly improve the stability of GO and make it exhibit a positive charge, which was more favorable for the further immobilization of biomolecules, such as GOD, with higher loading. Moreover, it could also improve the conductivity of the matrix film and facilitate the electron shuttle between the mediator and electrode. Under optimal conditions, the designed biosensor to glucose exhibited a wide and useful linear range of 0.02 to 5.39 mM with a low detection limit of 6.5 μM. The value of K _M ^app was 4.21 mM, indicating that the biosensor possesses higher biological affinity to glucose. The present approach could be used efficiently for the linkage of other redox mediators and immobilize other biomolecules in the process of fabricating novel biosensors.     

Amperometric Glucose Biosensor Based on Glucose Oxidase Encapsulated in Carbon Nanotube–Titania–Nafion Composite Film on Platinized Glassy Carbon Electrode

A highly sensitive and selective glucose biosensor has been developed based on immobilization of glucose oxidase within mesoporous carbon nanotube–titania–Nafion composite film coated on a platinized glassy carbon electrode. Synergistic electrocatalytic activity of carbon nanotubes and electrodeposited platinum nanoparticles on electrode surface resulted in an efficient reduction of hydrogen peroxide, allowing the sensitive and selective quantitation of glucose by the direct reduction of enzymatically‐liberated hydrogen peroxide at ?0.1 V versus Ag/AgCl (3 M NaCl) without a mediator. The present biosensor responded linearly to glucose in the wide concentration range from 5.0×10^?5 to 5.0×10^?3 M with a good sensitivity of 154 mA M^?1cm^?2. Due to the mesoporous nature of CNT–titania–Nafion composite film, the present biosensor exhibited very fast response time within 2 s. In addition, the present biosensor did not show any interference from large excess of ascorbic acid and uric acid.     

A PVC/TTF‐TCNQ Composite Electrode for Use as a Detector in Flow Injection Analysis

A new polyvinyl chloride (PVC)/tetrathiafulvalene‐tetracyanoquinodimethane (TTF‐TCNQ) composite electrode was prepared and tested for electroanalytical performance. Different PVC/TTF‐TCNQ–graphite proportions were used in order to obtain the best possible detector for accommodation in a wall‐jet electrochemical cell of use in flow injection analysis. A PVC/TTF‐TCNQ w/w ratio of 1/10 provided the best results in terms of sensitivity, coefficients of variation and mechanical resistance. The voltammetric and flow‐injection amperometric detection responses of the electrode to ascorbic acid (AA) were measured and compared with those of a PVC–graphite electrode. The resulting electrode provided good electrode kinetics with a low background current and a relatively reproducible signal. In addition, the electrode can be readily prepared and its surface readily renewed.     

Functionalized Carbon Black Nanospheres Hybrid with MoS2 Nanoclusters for the Effective Electrocatalytic Reduction of Chloramphenicol

Synthesis of nanomaterials using cheap and highly efficient material is an important aspect of nanotechnology. In this present work, we have used the carbon black (CB) as a highly conductive and inexpensive carbonaceous material for the fabrication of the electrochemical sensor. However, the poor dispersion in water obstructs the usage of CB in electrochemical sensor and biosensor applications. Hence, the CB was functionalized by simple reflux method and the functionalized CB (f‐CB) nanospheres hybrids with hydrothermally synthesized MoS₂ nanoclusters by simple ultrasonication process. In addition, the various suitable spectrometric techniques used to probe the surface morphology and chemical modification of the prepared materials. The prepared MoS₂ and f‐CB nanohybrids (f‐CB/MoS₂) applied for the electrocatalytic reduction of toxic chloramphenicol (CAP). Fascinatingly, the f‐CB/MoS₂ modified electrode showed a competitive electrocatalytic performance comparing with other modified electrodes. At the optimized condition, the sensor exhibited the LOD about 0.002 μM, wider linear range 0.015 to 1370 μM with the sensitivity of 3400 μA μM⁻¹ cm⁻² for the determination of CAP. Moreover, the practical viability of the sensor was exploited in milk powder and honey samples.     

A Novel Enzymatic Glucose Biosensor and Nonenzymatic Hydrogen Peroxide Sensor Based on (3‐Aminopropyl) Triethoxysilane Functionalized Reduced Graphene Oxide

In the present study, a novel enzymatic glucose biosensor using glucose oxidase (GOx) immobilized into (3‐aminopropyl) triethoxysilane (APTES) functionalized reduced graphene oxide (rGO‐APTES) and hydrogen peroxide sensor based on rGO‐APTES modified glassy carbon (GC) electrode were fabricated. Nafion (Nf) was used as a protective membrane. For the characterization of the composites, Fourier transform infrared spectroscopy (FTIR), X‐ray powder diffractometer (XRD), and transmission electron microscopy (TEM) were used. The electrochemical properties of the modified electrodes were investigated using electrochemical impedance spectroscopy, cyclic voltammetry, and amperometry. The resulting Nf/rGO‐APTES/GOx/GC and Nf/rGO‐APTES/GC composites showed good electrocatalytical activity toward glucose and H₂O₂, respectively. The Nf/rGO‐APTES/GC electrode exhibited a linear range of H₂O₂ concentration from 0.05 to 15.25 mM with a detection limit (LOD) of 0.017 mM and sensitivity of 124.87 μA mM⁻¹ cm⁻². The Nf/rGO‐APTES/GOx/GC electrode showed a linear range of glucose from 0.02 to 4.340 mM with a LOD of 9 μM and sensitivity of 75.26 μA mM⁻¹ cm⁻². Also, the sensor and biosensor had notable selectivity, repeatability, reproducibility, and storage stability.     

A Novel Glucose Biosensor Based on Palladium Nanoparticles and Its Application in Detection of Glucose Level in Urine

IntroductionThelevelofglucoseinbloodorurineindicateshyper andhypoglycaemia ,bothofwhichcanresultfromavarietyofendocrinedisorders .1 4 Therapidandreliabledetermi nationofglucoselevelisaroutineprojectinclinicchem istry.Urinesamplesaresaferandmoreconvenientthanbloodones .Meanwhile ,theconcentrationofglucoseinserumiscloselyassociatedwiththatinurine .2 4 Eventhoughglucoseelectrodeshavebeensuccessfullyusedinseruminclinicalapplication ,thequestionstillremainedofhowtodetecttheglucoselevelinurine ,wh…