Oxydative Aryl-Aryl-Verknüpfung von 6,6′,7,7′-Tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-biisochinolin-Derivaten

Oxidative Aryl-Aryl-Coupling of 6,6′,7,7′-Tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-biisoquinoline Derivatives We describe the synthesis of 2 by intramolecular oxidative coupling of 1, 1′-biisoquinoline derivatives 1 (Scheme 1). This heterocyclic system can be considered as a union of two apomorphine molecules and may thus exhibit dopaminergic activity. - The readily available tetrahydrobiisoquinoline 6 was methylated to 11 (Scheme 4) and reduced (with NaBH₃CN) to rac- 7 and (catalytically) to meso- 7 (Scheme 3). Reduction of 11 with NaBH₄ and of the biurethane rac- 9 with LiAlH₄/AlCl₃ afforded meso- and rac- 10 , respectively (Scheme 4). Demethylation of 6 , meso- 10 , meso- and rac- 7 led to 12 , meso- 14 , meso- and rac- 13 , respectively (Scheme 5). The latter two phenols were converted with chloroformic ester to the hexaethoxycarbonyl derivatives meso- and rac- 15 and subsequently saponified to the biurethanes meso- and rac- 16 , respectively (Scheme 5). - In order to assure proximity of the two aromatic rings, the ethano-bridged derivatives meso- and rac- 18 were prepared by condensing meso- and rac- 7 with oxalic ester and reducing the oxalyl derivatives meso- and rac- 17 with LiAlH₄/AlCl₃, respectively (Scheme 6). The ¹H-NMR, spectra at different temperatures showed that rac- 18 populated two conformers but rac- 17 only one, all with C₂-symmetry, and that meso- 17 as well as meso- 18 populated two enantiomeric conformers with C₁-symmetry. Whereas both oxalyl derivatives 17 were fairly rigid due to the two amide groupings, the ethano derivatives 18 exhibited coalescence temperatures of -20 and 30°. - The intramolecular coupling of the two aromatic rings was successful under ‘non-phenolic oxidative’ conditions with the tetramethoxy derivatives 7, 10 and 18 , the rac-isomers leading to the desired dibenzophenanthrolines, the meso-isomers, however, mostly to dienones (Scheme 9): With VOF₃ and FSO₃H in CF₃COOH/CH₂Cl₂ rac- 7 was converted to rac- 19 , rac- 18 to rac- 21 and rac- 10 to a mixture of rac- 20 and the dienone 23b of the morphinane type. Under the same conditions meso- 10 was transformed to the dienone 23a of the morphinane type, whereas meso- 18 yielded the dienone 24 of the neospirine type, both in lower yields. The analysis of the spectral data of the six coupling products offers evidence for their structures. With the demethylation of rac- 20 and rac- 21 to rac- 25 and rac- 26 , respectively, the synthetic goal of the work was reached, but only in the rac-series (Scheme 10). - In the course of this work two cleavages of octahydro-1,1′-biisoquinolines at the C(1), C(1′)-bond were observed: (1) The biurethanes 9 and 16 in both the meso- and rac-series reacted with oxygen in CF₃COOH solution to give the 3,4-dihydroisoquinolinium salts 27 and 28 ; the latter was deprotonated to the quinomethide 30 (Scheme 11). (2) Under the Clarke-Eschweiler reductive-methylation conditions meso- and rac- 7 were cleaved to the tetrahydroisoquinoline derivative 32 .     

2,2′,3,3′,4,4′,5,5′,6,6′‐Decafluoro­diphenyl­amine and its 1:1 cocrystal with diphenyl­amine

In the structures of deca­fluoro­diphenyl­amine, C₁₂HF₁₀N, and its 1:1 cocrystal with diphenyl­amine, C₁₂HF₁₀N·C₁₂H₁₁N, the mol­ecules are located on special positions of C₂ symmetry. The NH groups are not involved in hydrogen bonding and the usual face‐to‐face stacking inter­actions between phenyl and penta­fluoro­phenyl rings are not observed in the cocrystal.     

Copolymers of Intrinsic Microporosity Based on 2,2′,3,3′‐Tetrahydroxy‐1,1′‐dinaphthyl

A series of new copolymers with high molecular weight and low polydispersity, prepared from tetrahydroxydinaphthyl, tetrahydroxyspirobisindane, and tetrafluoroterephthalonitrile monomers, prevent efficient space packing of the stiff polymer chains and consequently show intrinsic microporosity. One copolymer, DNPIM‐33, has an excellent combination of properties with good film‐forming characteristics and gas transport performance, and exhibits higher selectivity than the corresponding spirobisindane‐based homopolymer PIM‐1 for gas pairs, such as O₂/N₂, with a corresponding small decrease in permeability. This work demonstrates that significant improvements in properties may be obtained through development of copolymers with intrinsic microporosity (CoPIMs) that extends the spectrum of high‐molecular‐weight ladder structures of poly(dibenzodioxane)s.

     

3,3′,5,5′‐Tetramethyl‐4,4′‐bipyrazole–pentafluorophenol (2/3)

In the title compound, 2C₁₀H₁₄N₄·3C₆HF₅O, one of the pentafluorophenol molecules resides on a mirror plane bisecting the O...F axis. The components aggregate by N—H...N, N—H...O and O—H...N hydrogen bonds involving equal disordering of the H atoms into molecular ensembles based on a 2:1 pyrazole–phenol cyclic pattern [O...N = 2.7768 (16) Å and N...N = 2.859 (2) Å], crosslinked into one‐dimensional columns via hydrogen bonding between the outer pyrazole groups and additional pentafluorophenol molecules. The latter yields a 1:1 pyrazole–phenol catemer with alternating strong O—H...N [2.5975 (16) Å] and weaker N—H...O [2.8719 (17) Å] hydrogen bonds. This is the first reported molecular adduct of a pentafluorinated phenol and a nitrogen base, and suggests the utility of highly acidic phenols and pyrazoles for developing hydrogen‐bonded cocrystals.     

1,1′‐Nitramino‐5,5′‐bitetrazoles

1,1′‐Dinitramino‐5,5′‐bitetrazole and 1,1′‐dinitramino‐5,5′‐azobitetrazole were synthesized for the first time. The neutral compounds are extremely sensitive and powerful explosives. Selected nitrogen‐rich salts were prepared to adjust sensitivity and performance values. The compounds were characterized by low‐temperature X‐ray diffraction, IR and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and DTA/DSC. Calculated energetic performances using the EXPLO5 code based on calculated (CBS‐4M) heats of formation and X‐ray densities support the high performances of the 1,1′‐dinitramino‐5,5′‐bitetrazoles as energetic materials. The sensitivities toward impact, friction, and electrostatic discharge were also explored. Most of the compounds show sensitivities in the range of primary explosives and should only be handled with great care!     

Dispiro[indene‐2,5′‐indeno[2,1‐a]fluorene‐6′,2′′‐indene]‐1,1′′,3,3′′,11′,12′‐hexaone: a three‐dimensional hydrogen‐bonded framework

The title compound, C₃₆H₁₆O₆, (I), was obtained as a new and unexpected oxidation product of 1,2′‐biindene‐1′,3,3′(2H)‐trione. The molecules of (I) exhibit approximate, but noncrystallographic, twofold rotation symmetry and the central ring of the fused pentacyclic portion is distinctly puckered, with a conformation intermediate between half‐chair and screw‐boat. Six independent C—H...O hydrogen bonds link the molecules into a three‐dimensional framework structure of considerable complexity. Comparisons are drawn between the crystal structure of (I) and those of several simpler analogues, which show wide variation in their patterns of supramolecular aggregation.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

The Crystal Structure of 5,5′,7,7′-tetramethyl-3,3′,9-triethyl thiacarbocyanine perchlorate

The crystal structure of the title compound has been determined by X-ray crystallographic analysis from diffractometer data. The compound is found to exist in the crystalline state as the mono-cis isomer (a). The conjugated chain is in a folded configuration and the two sulfur atoms are on opposing sides. It is the first time such a mono-cis isomer has been analysed by X-ray crystallography.     

Structural Transformation Pathways of Alkaline Earth Family Coordination Polymers Containing 3,3′,5,5′‐Biphenyl Tetracarboxylic Acid

The understanding of crystal stepwise transformation is very important to enclose the “black box” in the preparation of crystal materials. In this work, different structural intermediates were isolated prior to the formation of the final alkali earth coordination polymers (CPs) during the preparation of three pairs of alkali earth CPs through solvothermal method and convenient oil‐bath reactions. Single crystal X‐ray diffraction analysis demonstrated the structural transformation from a 0 D to 1 D inorganic connectivity for the Ca‐CPs and Sr‐CPs, but a 1 D to 0 D inorganic connectivity for Ba‐CPs, involving the breakage/formation of chemical bonds in the reaction solutions. Further analyses indicated that these two different structural transformation pathways are determined by the deprotonation of organic acid, competitive balance between the inorganic and organic connectivity, and the twist of the linker. FT‐IR spectra, thermogravimetric and luminescence behaviors agree with their structural characteristics.     

Linear High Molecular Weight Ladder Polymer via Fast Polycondensation of 5,5′,6,6′‐Tetrahydroxy‐3,3,3′,3′‐tetramethylspirobisindane with 1,4‐Dicyanotetrafluorobenzene

A high molecular weight ladder polymer based on 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethylspirobisindane and 1,4‐dicyanotetraflurobenzene has been synthesized by polycondensation under high‐intensity mixing conditions at about 155 °C and cyclic‐free products were obtained in high yield with low molecular weight distribution (1.7–2.3). The reaction could be completed within a few minutes. The polymer properties were characterized by GPC, ¹H NMR, ¹³C NMR, F NMR, FT‐IR, and MALDI‐TOF MS. In addition, the mechanical properties, apparent surface areas and gas permeability are also reported. This procedure can also be used for the synthesis of other ladder polymers by irreversible polycondensations of tetraphenols with activated tetrafluoro aromatics.

     

1,1′‐Di­acetyl‐3‐hydroxy‐2,2′,3,3′‐tetra­hydro‐3,3′‐bi(1H‐indole)‐2,2′‐dione

In the title compound, C₂₀H₁₆N₂O₅, both of the 1‐acetyl­isatin (1‐acetyl‐1H‐indole‐2,3‐dione) moieties are planar and form a dihedral angle of 74.1 (1)°. Weak intermolecular hydrogen bonds and C—H?π interactions stabilize the packing in the crystal.     

1,1′,3,3′‐Tetraalkyl‐2,2′‐biperimidinylidenes: Unexpected substituent effects on the reactivity of carbon–carbon double bond

C₂ deprotonation of 1,3‐dibutylperimidinium bromide ( 1a ) with sodium hydride and a catalytic amount of potassium tert‐butoxide in dry THF led to the formation of the exceptionally inert tetraaminoalkene 2a . In contrast, isostructural tetrakis(2‐methoxyethyl)‐tetraaminoalkene ( 2b ) instantaneously reacted with O₂ to yield urea 3b , and silver nitrate was readily reduced with 2b to form a silver mirror. Compound 2a has been characterized by X‐ray diffraction studies; the naphtho‐pyrimidine skeleton imposes structural constraints and some rigidity to the CC bonding. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:82–87, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10088     

Formation of hydrogen-bonded complexes of 3,3′,5,5′-tetrabromo-2,2′-biphenol with MTBD and triethylamine

The complexes of 3,3′,5,5′-tetrabromo-2,2′-biphenol (TBBPh) with 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene (MTBD) and triethylamine (TEA) were studied by FTIR spectroscopy. In chloroform and in acetonitrile a proton transfer from TBBPh to N-bases (MTBD, TEA) occurs. In chloroform solution the protonated N-base molecules are hydrogen-bonded to the deprotonated TBBPh molecules, whereas in acetonitrile the complexes dissociate. The intra- as well as intermolecular hydrogen bonds within the chains show large proton polarizability.     

3,4‐Dithiaphosphole and 3,3′,4,4′‐Tetrathia‐1,1′‐Biphosphole π‐Conjugated Systems: S Makes the Impact

Conjugated systems based on phospholes and 1,1′‐biphospholes bearing 3,4‐ethylenedithia bridges have been prepared using the Fagan–Nugent route. The mechanism of this organometallic route leading to intermediate zirconacyclopentadienes has been investigated by using theoretical calculations. This study revealed that the oxidative coupling leading to zirconacyclopentadienes is favored over oxidative addition within the S? C≡C bond both thermodynamically and kinetically. The impact of the presence of the S atoms on the optical and electrochemical behavior of the phospholes and 1,1′‐biphospholes has been systematically evaluated both experimentally and theoretically. A comparison with their “all‐carbon” analogues is provided. Of particular interest, this comparative study revealed that the introduction of S atoms has an impact on the electronic properties of phosphole‐based conjugated systems. A decrease of the HOMO–LUMO separation and a stabilization of the LUMO level were observed. These general trends are also observed with 1,1′‐biphospholes exhibiting σ–π conjugation. The P atom of the 3,4‐ethylenedithiaphospholes can be selectively oxidized by S₈ or O₂. These P modifications result in a lowering of the HOMO–LUMO separation as well as an increase of the reduction and oxidation potentials. The S atoms of the 3,4‐ethylenedithia bridge of the 2,5‐phosphole have been oxidized using m‐chloroperoxybenzoic acid. The resulting 3,4‐ethylenesulfoxide oxophosphole was characterized by an X‐ray diffraction study. Experimental and theoretical studies show that this novel chemical manipulation results in an increase of the HOMO–LUMO separation and an important decrease of the LUMO level. The electropolymerization of 2‐thienyl‐capped 3,4‐ethylenedithiathioxophosphole and 1,1′‐biphosphole is reported. The impact of the S substituents on the polymer properties is discussed.     

Dispiro[adamantane‐2,2′‐1′,3′,6′,9′,11′,14′‐hexathiacyclohexadecane‐10′,2′′‐adamantane]

The conformational features of the title compound, C₂₈H₄₄S₆, are compared with previously reported analogous macrocycles. The type of substituent affects considerably the conformation of the macrocycle. A ¹H NMR titration of the title compound with AgBF₄ indicated the formation of the 1:1 complex, which was not crystallized.     

Highly Soluble and Green Indigo Dyes: 4,4′,7,7′‐Tetraalkoxy‐5,5′‐diaminoindigotins

Two new types of 4,4′,7,7′‐tetraalkoxyindigotins, 1a – f and 2a – f along with the new N‐substituted indigotins 4e – f , were synthesized from dinitrobenzaldehydes 5a – f , which were prepared from 2‐hydroxy‐5‐methoxybenzaldehyde ( 7 ) via dialkoxybenzaldehydes 6a – f (Scheme). The new dialkoxyindigotin 3g was obtained from dialkoxybenzaldehyde 6g via nitrobenzaldehyde 8g . The 1,4‐dialkoxy‐2,3‐dinitrobenzenes 9 were isolated as by‐products. The 4,4′,7,7′‐tetraalkoxy‐5,5′‐diaminoindigotins 1 are soluble in organic solvents, and their solutions are green, which is highly uncommon for indigotins and is primarily caused by electronic effects of substituents, steric effects playing a minor role. The indigotins 1 produce a strong red shift of the longest‐wavelength absorption and negative solvatochromism indicating the predominance of polar resonance structures in the ground state. Tautomeric structures were excluded. These indigotins are valuable compounds for technical applications, for synthetic purposes, and for analytical studies. SANS (Small‐angle neutron scattering) experiments showed that certain 4,4′,7,7′‐tetraalkoxy‐5,5′‐diaminoindigotins 1 form rod‐like aggregates in solution. The similarly substituted 4,4′,7,7′‐tetraalkoxy‐5,5′‐dinitroindigotins 2 are far less soluble. They produce red monoanions (preferably dimers) and bluish‐purple dianions in organic solvents.