Bioelectrocatalysis by Microperoxidase‐11 in a Multilayer Architecture of Chitosan Embedded Gold Nanoparticles

We report on the redox behaviour of the microperoxidase‐11 (MP‐11) which has been electrostatically immobilized in a matrix of chitosan‐embedded gold nanoparticles on the surface of a glassy carbon electrode. MP‐11 contains a covalently bound heme c as the redox active group that exchanges electrons with the electrode via the gold nanoparticles. Electroactive surface concentration of MP‐11 at high scan rate is between 350±50 pmol cm^?2, which reflects a multilayer process. The formal potential (E°′) of MP‐11 in the gold nanoparticles‐chitosan film was estimated to be ?(267.7±2.9) mV at pH 7.0. The heterogeneous electron transfer rate constant (k_s) starts at 1.21 s^?1 and levels off at 6.45 s^?1 in the scan rate range from 0.1 to 2.0 V s^?1. Oxidation and reduction of MP‐11 by hydrogen peroxide and superoxide, respectively have been coupled to the direct electron transfer of MP‐11.     

Direct electrochemistry of myoglobin based on electrodeposition of Pd nanoparticles with carbon ionic liquid electrode as basic electrode

We report on the direct electrochemistry and electrocatalytic properties of myoglobin (Mb) immobilized on a carbon ionic liquid electrode covered with a matrix composed of an ionic liquid, gellan gum, and Pd nanoparticles. UV-vis and FT-IR spectroscopy confirm that Mb retains its native structure in the composite film on the electrode. Scanning electron microscopy reveals that the nanoparticles are deposited on the surface of the Pd electrode. Cyclic voltametry gives a pair of well-defined and quasireversible redox peaks with a formal potential (E ^0′) of ?332 mV and a peak-to-peak separation of 64 mV at near-neutral pH value. The modified electrode shows good electrocatalytic activity towards the reduction of hydrogen peroxide, with a linear range between 5.0 μM and 0.27 mM and a detection limit of 1.7 μM (S/N = 3). The apparent Michaelis-Menten constant is 88 μM.

Attachment of Nanoparticles to Pyrolytic Graphite Electrode and Its Application for the Direct Electrochemistry and Electrocatalytic Behavior of Catalase

Abstract

A highly hydrophilic, nontoxic, and conductive effect of colloidal gold nanoparticles (GNP) and multi-walled carbon nanotubes (MWCNT) on pyrolytic graphite electrode has been demonstrated. The direct electron transfer of catalase (CAT) was achieved based on the immobilization of MWCNT/CAT-GNP on a pyrolytic graphite electrode by a Nafion film. The immobilized catalase displayed a pair of well-defined and nearly reversible redox peaks in 0.1 M phosphate buffer solution (PBS) (pH 6.98). The dependence of E°′on solution pH indicated that the direct electron transfer reaction of catalase was a single-electron-transfer coupled with single-proton-transfer reaction process. The immobilized catalase maintained its biological activity, showing a surface controlled electrode process with an apparent heterogeneous electron transfer rate constant (k _s) of 1.387±0.1 s^?1 and charge-transfer coefficient (α) of 0.49, and displayed electrocatalytic activity in the electrocatalytic reduction of hydrogen peroxide. Therefore, the resulting modified electrode can be used as a biosensor for detecting hydrogen peroxide.     

Electrocatalytic Oxidation of Hydrogen Peroxide on Poly(m‐toluidine)‐Nickel Modified Carbon Paste Electrode in Alkaline Medium

The poly(m‐toluidine) film was prepared by using the repeated potential cycling technique in an acidic solution at the surface of carbon paste electrode. Then transition metal ions of Ni(II) were incorporated to the polymer by immersion of the modified electrode in a 0.2 M NiSO₄, also the electrochemical characterization of this modified electrode exhibits stable redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic ability of Ni(II)/poly(m‐toluidine)/modified carbon paste electrode (Ni/PMT/MCPE) was demonstrated by electrocatalytic oxidation of hydrogen peroxide with cyclic voltammetry and chronoamperometry methods in the alkaline solution. The effects of scan rate and hydrogen peroxide concentration on the anodic peak height of hydrogen peroxide oxidation were also investigated. The catalytic oxidation peak current showed two linear ranges with different slopes dependent on the hydrogen peroxide concentration and the lower detection limit was 6.5 μM (S/N=3). The catalytic reaction rate constant, (k_h), was calculated 5.5×10² M^?1 s^?1 by the data of chronoamperometry. This modified electrode has many advantages such as simple preparation procedure, good reproducibility and high catalytic activity toward the hydrogen peroxide oxidation. This method was also applied as a simple method for routine control and can be employed directly without any pretreatment or separation for analysis cosmetics products.     

魔芋多糖固定化肌红蛋白的直接电化学与电催化

用魔芋多糖(KGM)和N,N-二甲基甲酰胺(DMF)的加合物,将肌红蛋白(Mb)固定在玻碳电极(GCE)上,制备了稳定的Mb-KGM-DMF/GCE修饰电极,并研究了Mb在修饰电极上的直接电化学行为和电催化性能。该电极在pH=7.0的磷酸盐缓冲溶液(PBS)中,-0.38 V(E0′)处有一对氧化还原峰,峰电位差ΔEp=70 mV,该峰正是Mb中血红素辅基FeⅢ/FeⅡ电对的氧化还原特征峰。在0.2~9.0 V/s扫速的范围内,氧化还原峰峰电流大小和扫描速率成正比,呈现出表面控制行为。在pH为5.0~12.0的范围内,式电位和pH值呈线性关系,表明电子传递过程伴随着质子转移。同时,Mb-KGM-DMF/GCE修饰电极表现出良好的电催化性能,对氧、H2O2有显著的催化作用。在4.70~75.0μmol/L的范围内,其催化峰电流大小与H2O2的浓度有良好的线性关系,其线性回归方程i=0.127 0.093C,r=0.9989,表观米氏常数为80.8μmol/L。     

Direct Electrochemistry of Hemoglobin Immobilized on Colloidal Gold‐Hydroxyapatite Nanocomposite for Electrocatalytic Detection of Hydrogen Peroxide

A novel nanocomposite of colloidal gold (GNPs) and hydroxyapatite nanotubes (Hap) was prepared for immobilization of a redox protein, hemoglobin (Hb), on glassy carbon electrode. The immobilized Hb showed fast direct electron transfer and excellent electrocatalytic behavior toward reduction of hydrogen peroxide. A synergic effect between GNPs and Hap for accelerating the surface electron transfer of Hb was observed, which led to a pair of redox peaks with a formal potential of (?340±2) mV at pH 7.0, and a new biosensor for hydrogen peroxide with a linear range from 0.5 to 25 μM and a limit of detection of 0.2 μM at 3σ. Owing to the good biocompatibility of the nanocomposite, the biosensor exhibited good stability and acceptable reproducibility. The as‐prepared nanocomposite film provided a good matrix for protein immobilization and biosensor preparation.     

Direct Electron Transfer and Electrocatalysis of Myoglobin Based on its Direct Immobilization on Carbon Ionic Liquid Electrode

Direct electron transfer of myoglobin (Mb) was achieved by its direct immobilization on carbon ionic liquid electrode (CILE) with a conductive hydrophobic ionic liquid, 1‐butyl pyridinium hexaflourophosphate ([BuPy][PF₆]) as binder for the first time. A pair of well‐defined, quasi‐reversible redox peaks was observed for Mb/CILE resulting from Mb redox of heme Fe(III)/Fe(II) redox couple in 0.1 M phosphate buffer solution (pH 7.0) with oxidation potential of ?0.277 V, reduction potential of ?0.388 V, the formal potential E°′ (E°′=(E_pa+E_pc)/2) at ?0.332 V and the peak‐to‐peak potential separation of 0.111 V at 0.5 V/s. The average surface coverage of the electroactive Mb immobilized on the electrode surface was calculated as 1.06±0.03×10^?9 mol cm^?2. Mb retained its bioactivity on modified electrode and showed excellent electrocatalytic activity towards the reduction of H₂O₂. The cathodic peak current of Mb was linear to H₂O₂ concentration in the range from 6.0 μM to 160 μM with a detection limit of 2.0 μM (S/N=3). The apparent Michaelis–Menten constant (K and the electron transfer rate constant (k_s) were estimated to be 140±1 μM and 2.8±0.1 s^?1, respectively. The biosensor achieved the direct electrochemistry of Mb on CILE without the help of any supporting film or any electron mediator.     

Amperometric Sensor for Trichloroacetic Acid Based on Myoglobin/Colloidal Gold Nanoparticles Immobilized in Titania Sol–Gel Matrix

A new amperometric sensor for the determination of trichloroacetic acid (TCA) was developed based on the immobilization of myoglobin/colloidal gold nanoparticles in titania sol–gel matrix. The sensor showed a pair of well‐defined and nearly reversible cyclic voltammetric peaks for the Mb Fe(III)/Fe(II) with a formal potential (E°′) of ?335 mV and a peak‐to‐peak separation was 61 mV vs. Ag/AgCl (3.0 M KCl) at 100 mV s^?1 in 0.1 M pH 7.0 phosphate buffer solutions (PBS). The formal potential of the Mb Fe(III)/Fe(II) couple shifted linearly with the pH with a slope of ?51.3 mV/pH, indicating that an electron transfer accompanies single‐proton transportation. The sensor displayed a good electrocatalytic response toward the reduction of TCA and the catalytic mechanism was also discussed. The overpotential for the reduction of TCA was lowered by at least 0.8 V compared with that obtained at bare glassy carbon electrode. The linear range spans the concentration of TCA from 2.0×10^?6 to1.2×10^?5 M and the detection limit was 1.2×10^?7 M. In addition, the stability, repeatability and selectivity of the sensor were also evaluated.     

A Novel NH2/ITO Ion Implantation Electrode: Preparation,Characterization, and Application in Bioelectrochemistry

A novel NH₂⁺ ion implantation‐modified indium tin oxide (NH₂/ITO) electrode was prepared. Acid‐pretreated, negatively charged MWNTs were firstly modified on the surface of NH₂⁺ ion implantation electrode, then, positively charged Mb was adsorbed onto MWNTs films by electrostatic interaction. The assembly of MWNTs and Mb was characterized with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The immobilized Mb showed a couple of quasireversible cyclic voltammetry peaks in pH 7.0 phosphate buffer solution (PBS). The apparent surface concentration of Mb at the electrode surface was 1.06×10^?9 mol cm^?2. The Mb/MWNTs/NH₂/ITO electrode also gave an improved electrocatalytic activity towards the reduction of hydrogen peroxide. The catalysis currents increased linearly to the H₂O₂ concentration in a wide range from 9×10^?7 to 9.2×10^?5 M with a correlation coefficient of 0.999. The detection limit was 9.0×10^?7 M. The experiment results demonstrated that the modified electrode provided a biocompatible microenvironment for protein and supplied a necessary pathway for its direct electron transfer.     

Electrochemical Surface Structuring with Polyaniline Wrapped Hb for Hydrogen Peroxide Biosensing

Through the electrodeposition of aniline with hemoglobin (Hb) on zincoxide‐gold colloidal sols (ZnO‐AuNPs) modified indium oxide electrode, a hydrogen peroxide (H₂O₂) biosensor was constructed. Polyaniline (PANI) form a nano‐cage wrapped Hb, which provided a comfortable and stable site for the immobization of Hb. UV‐vis spectrum was employed to characterize Hb retained original structure in the resulting Hb‐PANI/ZnO‐AuNPs membrane. Electrochemical investigation of the biosensor showed a pair of well‐defined, quasi‐reversible redox peaks with E_pa= ‐0.139 V and E_pc = ‐0.238 V (vs. SCE) in 0.1 M pH 7.0 phosphate buffer solution at the scan rate of 100 mV/s. The biosensor displayed a fast response time (<3 s) and broad linear response to H₂O₂ in the range from 1.5 μM to 1.7 mM with a detection limit of 0.8 μM (S/N = 3).     

Study of the Electrochemical Behavior of Disperse Blue 1‐Modified Graphite Electrodes. Application to the Flow Determination of NADH

The preparation and the electrochemical study of Disperse Blue 1‐chemically modified electrodes (DB1‐CME), as well as their efficiency for the electrocatalytic oxidation of NADH is described. The proposed mediator was immobilized by physical adsorption onto graphite electrodes. The electrochemical behavior of DB1‐CME was studied with cyclic voltammetry. The electrochemical redox reaction of DB1 was found to be reversible, revealing two well‐shaped pair of peaks with formal potentials 152 and ?42 mV, respectively, (vs. Ag/AgCl/3M KCl) at pH 6.5. The current I_p has a linear relationship with the scan rate up to 800 mV s^?1, which is indicative for a fast electron transfer kinetics. The dissociation constants of the immobilized DB1 redox couple were calculated pK₁=4 and pK₂=5. The electrochemical rate constants of the immobilized DB1 were calculated k₁°=18 s^?1 and k₂°=23 s^?1 (Γ=2.36 nmol cm^?2). The modified electrodes were mounted in a flow injection manifold, poised at +150 mV (vs. Ag/AgCl/3M KCl) and a catalytic current due to the oxidation of NADH was measured. The reproducibility was 1.4% RSD (n=11 for 30 μM NADH) The behavior of the sensor towards different reducing compounds was investigated. The sensor exhibited good operational and storage stability.     

A Novel Hydrogen Peroxide Biosensor Based on the PDDA‐GNPs/MWNTs Nanocomposite Matrix

A novel nanocomposite designed by the assembly of the positively charged poly(diallyldimethylammonium chloride) protected gold nanoparticles (PDDA‐GNPs), and the negatively charged multi‐walled carbon nanotubes (MWCNTs) on ITO electrode via electrostatic interaction, was used as a supporting matrix for immobilizing hemoglobin (Hb) to develop a high‐performance hydrogen peroxide (H₂O₂) biosensor. The cyclic voltammetrys of immobilized Hb showed a pair of well‐defined and quasi‐reversible redox peaks with the formal potential of ‐0.205V (vs. SCE) and the peak‐to‐peak potential separation of 44 mV at a scan rate of 100 mV×s^?1 in 0.1 mol×L^?1 pH 7.0 PBS. Under the optimized experimental conditions, a linearity range for determination of H₂O₂ was from 2.0 × 10^?6 to 5.2 × 10^?4 mol×L^?1 with a correlation coefficient of 0.9994 (n = 37) and a detection limit of 8.4 × 10^?7 mol×L^?1. The biosensor displayed excellent electrochemical and electrocatalytic response to the reduction of H₂O₂, high sensitivity, long‐term stability, good bioactivity and selectivity.     

The Direct Electron Transfer of Iron‐Containing Superoxide Dismutase (Fe‐SOD) and its Catalysis for the Oxygen Reduction Reaction (ORR) in Room Temperature Ionic Liquids (RTILs) on a Gold Electrode

In this work, for the first time, the direct electron transfer of iron‐containing superoxide dismutase (Fe‐SOD) was observed by cyclic voltammetry on a gold (Au) electrode in three RTILs, i.e., 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄), 1‐n‐propyl‐3‐methylimidazolium tetrafluoroborate (PMIBF₄) and 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIBF₄). And the results demonstrate that when the scan rate was as low as 1 mV/s, a pair of well‐defined quasi‐reversible peaks of Fe‐SOD was presented, while as the potential scan rate was above 10 mV/s, the reduction peak of Fe‐SOD disappeared though its oxidation peak could be clearly observed even as the potential scan rate was up to 400 mV/s, strongly indicating that these CVs we observed were attributable to Fe‐SOD rather than the impurities in RTILs. Its catalysis for oxygen reduction reaction (ORR) was directly verified by the shifting of formal potential, E⁰′, of ORR, to the positive direction though the value of standard rate constant, κ⁰, corresponding to ORR, was not much enhanced. In PMIBF₄, for the multi‐walled carbon nanotubes (MWCNTs)‐modified gold electrode, both the reduction peak current and oxidation peak current for oxygen redox reaction were all dramatically enhanced compared to the case of a bare gold electrode, and the value of κ⁰ was also increased from 3.1 × 10^?3 cm s^?1 for the bare gold electrode, to 17.5 × 10^?3 cm s^?1. Hence, in the presence of Fe‐SOD in RTILs, MWCNTs, showing catalysis for the electron transfer process of ORR, coupled with Fe‐SOD, leading to the shifting of formal potential corresponding to ORR to the positive direction, presented us a satisfactory catalysis for ORR in RTILs. Some reasons available for this catalysis behavior stemming from Fe‐SOD, and MWCNTs as well, for ORR are discussed based on the previously developed proposition.     

Dendritic Silver/Silicon Dioxide Nanocomposite Modified Electrodes for Electrochemical Sensing of Hydrogen Peroxide

A novel biosensor for hydrogen peroxide was prepared by immobilizing horseradish peroxidase (HPR) on newly synthesized dendritic silver/silicon dioxide nanocomposites, which were coated on a glassy carbon electrode. The modified electrode was characterized with XPS, SEM, and electrochemical methods. This biosensor showed a very fast amperometric response to hydrogen peroxide with a linear range from 0.7 to 120 μM, a limit of detection of 0.05 μM and a sensitivity of 1.02 mA mM^?1 cm^?2. The Michaelis‐Menten constant of the immobilized HRP was estimated to be 0.21 mM, indicating a high affinity of the HRP to H₂O₂ without loss of enzymatic activity. The preparation of the proposed biosensor was convenient, and it showed high sensitivity and good stability.     

Sensitive Flow-Injection Electrochemical Determination of Hydrogen Peroxide at a Palladium Nanoparticle-Modified Pencil Graphite Electrode

A novel flow-injection amperometric method was proposed for the sensitive and enzymeless determination of hydrogen peroxide based on its electrocatalytic reduction at a palladium nanoparticle-modified pretreated pencil graphite electrode in a laboratory-constructed electrochemical flow cell. Cyclic voltammograms of the unmodified and modified electrodes were recorded in pH 7.0 phosphate buffer containing 0.10 M KCl at a scan rate of 50?mV s^?1 for the investigation of electrocatalytic reduction of hydrogen peroxide at the palladium nanoparticle-modified pretreated pencil graphite electrode. Cyclic voltammograms of the pretreated pencil graphite electrode revealed an irreversible oxidation peak and a weak reduction peak of hydrogen peroxide at +1100?mV and –450?mV vs. an Ag/AgCl/KCl saturated reference electrode. However, the reduction of hydrogen peroxide was observed at –100?mV with an increase in current in the cyclic voltammograms of the palladium nanoparticle-modified pretreated pencil graphite electrode compared to the unmodified electrode. These results indicate that the palladium nanoparticle-modified pretreated pencil graphite electrode exhibits efficient electrocatalytic activity for the reduction of hydrogen peroxide. A linear concentration range was obtained between .01 and 10.0?mM hydrogen peroxide with a detection limit of 3.0 µM from flow injection amperometric current–time curves recorded in pH 7.0 phosphate buffer at –100?mV and a 2.0?mL min^?1 flow rate. The novelty of this work relies on its use of a laboratory-constructed flow cell constructed for the pencil graphite electrode using these inexpensive, disposable, and electrochemically reactive modified electrodes for the amperometric determination of hydrogen peroxide in a flow injection analysis system.     

Poly(ortho‐toluidine) Modified Carbon Paste Electrode: A Sensor for Electrocatalytic Reduction of Nitrite

The electrocatalytic reduction of nitrite has been studied by poly(ortho‐toluidine) films modified carbon paste electrode (P‐OT/MCPE). Cyclic voltammetry and chronoamperometry techniques were used to investigate the suitability of poly(ortho‐toluidine) as a mediator for the electrocatalytic nitrite reduction in aqueous solution with various pH. Results showed that pH 0.00 is the most suitable for this purpose. In the optimum pH, the reduction of nitrite occurs at a potential about 600 mV more positive than unmodified carbon paste electrode. The catalytic reaction rate constant, (k_h), was calculated 8.68×10² M^?1 s^?1 by the data of chronoamperometry. The catalytic reduction peak current was linearly dependent on the nitrite concentration and the linearity range obtained was 5.00×10^?4 M–1.90×10^?2 M. Detection limit has been found to be 3.38×10^?4 M (2σ). This method has been successfully employed for quantification of nitrite in real sample.     

Amperometric Biosensor for Hydrogen Peroxide,Using Supramolecularly Immobilized Horseradish Peroxidase on the β‐Cyclodextrin‐Coated Gold Electrode

Horseradish peroxidase, previously modified with 1‐adamantane moieties, was supramolecularly immobilized on gold electrodes coated with perthiolated β‐cyclodextrin. The functionalized electrode was employed for the construction of an amperometric biosensor device for hydrogen peroxide using 1 mM hydroquinone as electrochemical mediator. The biosensor exhibited a fast amperometric response (6 s) and a good linear response toward H₂O₂ concentration between 12 μM and 450 μM. The biosensor showed a sensitivity of 1.02 mA/M cm², and a very low detection limit of 5 μM. The electrode retained 97% of its initial electrocatalytic activity after 30 days of storage at 4 ⁰C in 50 mM sodium phosphate buffer, pH 7.0.     

Amperometric Biosensor for Hydrogen Peroxide Based on Electrodeposited Sub-micrometer Gold Modified Glassy Carbon Electrode

IntroductionAmperometricbiosensorofhydrogenperoxideisofpracticalimportancebecauseofitswideapplicationsinchemical,biological,clinical,environmentalandmanyotherfields.Forimprovementofsensor抯quality,vari-ouskindsofchemicalmodificationmethodshavebeendevelopedforreducingredoxoverpotentialsofH2O2atelectrodesurfaces,increasingthedetectionsensitivity,linearrange,stabilityandlivetime.Ithasbeenshownthattheuseofsub-micrometersizedmetalparticlessuchasPt-blackcansignificantlyimprovethequalityofthebiosens…     

A Nitrite Biosensor Based on Coimmobilization of Nitrite Reductase and Viologen‐Modified Polysiloxane on Glassy Carbon Electrode

Copper containing nitrite reductase (Cu‐NiR) and viologen‐modified sulfonated polyaminopropylsiloxane (PAPS‐SO₃H‐V) were co‐immobilized on glassy carbon electrode (GCE) by hydrophilic polyurethane (HPU) drop‐coating, and the electrode was tested as a reagentless electrochemical biosensor for nitrite detection. The newly synthesized PAPS‐SO₃H‐V as an electron transfer (ET) mediator between electrode and NiR was effective, and could be effectively immobilized in HPU membrane. The NiR and PAPS‐SO₃H‐V co‐immobilized GCE used as a nitrite biosensor showed the following performance factors: sensitivity=12.0 nA μM^?1, limit of detection (LOD)=60 nM (S/N=3), linear response range=0–18 μM (r²=0.996) and response time (t_90%)=60 s, respectively. Lineweaver–Burk plot shows that apparent Michaelis–Menten constant (K is 101 μM. Storage stability of the sensor is 51 days (80% of initial activity) in condition of storing in ambient air at room temperature. The sensor showed a relative standard deviation (RSD) of 3.2% (n=5) even in condition of injection of 1 μM nitrite. Interference study showed that common anions in water sample such as chlorate, chloride, sulfate and sulfite do not interfere with the nitrite detection. However, nitrate interfered with a relative sensitivity of 80% due to inherent character of the enzyme used.     

Fabrication of Glucose Biosensor Based on Encapsulation of Glucose‐Oxidase on Sol‐Gel Composite at the Surface of Glassy Carbon Electrode Modified with Carbon Nanotubes and Celestine Blue

A simple procedure was developed to prepare a glassy carbon electrode modified with multi walled carbon nanotubes (MWCNTs) and Celestin blue. Cyclic voltammograms of the modified electrode show stable and a well defined redox couple with surface confined characteristic at wide pH range (2–12). The formal potential of redox couple (E′) shifts linearly toward the negative direction with increasing solution pH. The surface coverage of Celestine blue immobilized on CNTs glassy carbon electrode was approximately 1.95×10^?10 mol cm^?2. The charge transfer coefficient (α) and heterogeneous electron transfer rate constants (k_s) for GC/MWCNTs/Celestine blue were 0.43 and 1.26 s^?1, respectively. The modified electrode show strong catalytic effect for reduction of hydrogen peroxide and oxygen at reduced overpotential. The glucose biosensor was fabricated by covering a thin film of sol‐gel composite containing glucose oxides (GOx) on the surface of Celestine blue /MWCNTs modified GC electrode. The biosensor can be used successfully for selective detection of glucose based on the decreasing of cathodic peak current of oxygen. The detection limit, sensitivity and liner calibration rang were 0.3 μM, 18.3 μA/mM and 10 μM–6.0 mM, respectively. The accuracy of the biosensor for glucose detection was evaluated by detection of glucose in a serum sample, using standard addition protocol. In addition biosensor can reach 90% of steady currents in about 3.0 sec and interference effect of the electroactive existing species (ascorbic acid–uric acid and acetaminophen) was eliminated. Furthermore, the apparent Michaelis–Menten constant 2.4 mM, of GOx on the nano composite exhibits excellent bioelectrocatalytic activity of immobilized enzyme toward glucose oxidation. Excellent electrochemical reversibility of redox couple, high stability, technically simple and possibility of preparation at short period of time are of great advantages of this procedure for modification of glucose biosensor.