Electrochemical Determination of Sulfide at High Temperatures via Its Electrochemically Initiated Reaction with Diethyl‐p‐phenylenediamine in Dimethylformamide

The electrochemical oxidation of DEPD proceeds via an EC_revECE mechanism in dimethylformamide. It has been investigated at elevated temperatures up to 130 °C at both micro and macro platinum and glassy carbon electrodes. Kinetic and thermodynamic parameters for the reaction process have been calculated for each temperature. Further, the voltammetric response of DEPD shows enhanced limiting currents in the presence of sulfide. The analytical utility of the approach has been investigated with linear range from 50 to 850 μM sulfide concentration observed and a corresponding limit of detection of 20 μM achievable at temperatures of 70 °C.     

Reaction with N,N‐Diethyl‐p‐phenylenediamine: A Procedure for the Sensitive Square‐Wave Voltammetric Detection of Chlorine

The reaction of chlorine and N,N‐diethyl‐p‐phenylenediamine has been studied as a means of generating an analytical voltammetric signal of much improved sensitivity and selectivity for the detection of the former than is possible via direct electrolysis. A reaction mechanism is suggested whereby the chlorine attacks the primary amine of DEPD to form the N‐chlorinated product that shows a much enhanced signal under conditions of square‐wave voltammetry than does chlorine itself. The analytical parameters were found to vary with concentration of DEPD and a linear range from 17 to 495 μM was achievable with a corresponding limit of detection of 6.8 μM     

The Electrochemical Oxidation of N,N‐Diethyl‐p‐Phenylenediamine in DMF and Analytical Applications. Part I: Mechanistic Study

The electrochemical oxidation of N,N‐diethyl‐p‐phenylenediamine in dimethylformamide has been studied at platinum and gold microdisk electrodes of various radii between 6.7 and 66 μm. The voltammetric responses revealed two electrochemically reversible waves the second of which becomes larger at higher concentrations and bigger electrode radii. The voltammetric signals have been modelled and the electrochemical oxidation reaction is not inconsistent with an EC_revECE reaction. Kinetic parameters are reported.     

Application of a LC–MS/MS method developed for the determination of p‐phenylenediamine,N‐acetyl‐p‐phenylenediamine and N,N‐diacetyl‐p‐phenylenediamine in human urine specimens

Cases of poisoning by p‐phenylenediamine (PPD) are detected sporadically. Recently an article on the development and validation of an LC–MS/MS method for the detection of PPD and its metabolites, N‐acetyl‐p‐phenylenediamine (MAPPD) and N,N‐diacetyl‐p‐phenylenediamine (DAPPD) in blood was published. In the current study this method for detection of these compounds was validated and applied to urine samples. The analytes were extracted from urine samples with methylene chloride and ammonium hydroxide as alkaline medium. Detection was performed by LC–MS/MS using electrospray positive ionization under multiple reaction‐monitoring mode. Calibration curves were linear in the range 5–2000 ng/mL for all analytes. Intra‐ and inter‐assay imprecisions were within 1.58–9.52 and 5.43–9.45%, respectively, for PPD, MAPPD and DAPPD. Inter‐assay accuracies were within ?7.43 and 7.36 for all compounds. The lower limit of quantification was 5 ng/mL for all analytes. The method, which complies with the validation criteria, was successfully applied to the analysis of PPD, MAPPD and DAPPD in human urine samples collected from clinical and postmortem cases.     

Sonovoltammetric Elucidation of Electron Transfer Rates: The Oxidation of Dimethyl‐p‐phenylenediamine in Aqueous Solution

The electrochemical oxidation of dimethyl‐p‐phenylenediamine (DMPD) in aqueous solution (pH 7 phosphate buffer) has been studied under conventional hydrodynamic and microelectrode voltammetric conditions and found to undergo a two‐electron electrochemically reversible oxidation. Upon the application of ultrasound to the system an observed shoulder emerges in the oxidation wave. This effect has been attributed to the resolution of the two‐electron transfer processes occurring: the first a relatively fast electron transfer (0.1 cm s^?1) followed by a second slower (10^?3 cm s^?1) electron transfer: under the very high mass transport rates induced by insonation an overpotential develops for the second electron transfer so leading to the observed voltammetric resolution. The range of mass transport conditions accessible via sonication allows the estimation of the two rate constants reported.     

Highly stable electrochromic polyamides based on N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine monomer, N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenyl‐1,4‐phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N‐methyl‐2‐pyrrolidinone (NMP) and N,N‐dimethylacetamide, and could be solution‐cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass‐transition temperatures of 269–296 °C, 10% weight‐loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316–342 nm and photoluminescence maxima around 362–465 nm in the violet‐blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole‐transporting and electrochromic properties were examined by electrochemical and spectro‐electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide‐coated glass substrate exhibited two reversible oxidation redox couples at 0.57–0.60 V and 0.95–0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm²/C for the green coloring) and high contrast ratio of optical transmittance change (ΔT%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330–2343, 2009     

Synthesis and properties of new soluble aromatic polyamides and polyimides on the basis of N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new N‐phenylated amide (N‐phenylamide) unit containing aromatic diamine, N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 3‐nitrobenzoyl chloride, followed by catalytic reduction. Two series of organosoluble aromatic poly(N‐phenylamide‐imide)s and poly(N‐phenylamide‐amide)s with inherent viscosities of 0.58–0.82 and 0.56–1.21 dL/g were prepared by a conventional two‐stage method and the direct phosphorylation polycondensation, respectively, from the diamine with various aromatic dianhydrides and aromatic dicarboxylic acids. All polyimides and polyamides are amorphous and readily soluble in many organic solvents such as N,N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with high tensile strengths. These polyimides and polyamides had glass‐transition temperatures in the ranges of 230–258 and 196–229 °C, respectively. Decomposition temperatures of the polyimides for 10% weight loss all occurred above 500 °C in both nitrogen and air atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2564–2574, 2002     

The oxidative polymerization of p‐phenylenediamine with silver nitrate: Toward highly conducting micro/nanostructured silver/conjugated polymer composites

The oxidative polymerization of p‐phenylenediamine with silver nitrate by using various oxidant/monomer mole ratios in aqueous solutions of both acetic and nitric acid was studied experimentally and computationally. The produced micro/nanostructured conducting poly(p‐phenylenediamine)–silver composites, reaching the conductivities >10⁴ S/cm, were characterized by conductivity and density measurements, gel permeation chromatography, transmission electron microscopy, UV–visible, FTIR, and Raman spectroscopies. The highest conductivity was 31,700 S/cm for poly(p‐phenylenediamine) base–silver (81.4 wt % Ag). The unexpected increase of conductivity after deprotonation of polymer component is discussed on the basis of interfacial electrical barriers and their removal. Theoretical study of the mechanism of p‐phenylenediamine oxidation has been based on the AM1 semi‐empirical quantum chemical computations of the heat of formation of the reaction intermediates, taking into account the influence of pH and solvation effects. Quantum chemical predictions of molecular structure of poly(p‐phenylenediamine) were correlated with spectroscopic findings. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Screening of N,N‐bidentate and N,N,N‐tridentate pyridine‐based ligands in the catalytic allylic oxidation of cyclic olefins

A variety of chiral N,N‐bidentate and N,N,N‐tridentate ligands based on the pyridine framework, namely C2‐symmetric dipyridylmethane and terpyridine, N‐(p‐toluensulfinyl)iminopyridines and two kinds of iminopyridines, has been assessed in the asymmetric copper(I)‐catalysed allylic oxidation of cyclic olefins. Catalytic activity and enantioselectivity were found to be highly dependent upon the framework of the ligands, which afforded cycloalkenyl benzoates in low to moderate yields and enantioselectivities. The best yields (up to 70%) and enantioselectivities (up to 53% enantiomeric excess) were obtained with an iminopyridine based on camphane and quinoline skeletons. Copyright © 2014 John Wiley & Sons, Ltd.     

Solid Phase Extraction of Thallium(III) on Micro Crystalline Naphthalene Modified with N,N’-Bis(3-methylsalicylidene)- ortho-phenylenediamine and Determination by Spectrophotometry

A novel, simple, sensitive and effective method has been developed for preconcentration of thallium on N,N’-bis(3-methylsalicylidene)-ortho-phenylenediamine (MSOPD) adsorbent in a pH range 5.0—10.0, prior to its spectrophotometric determination, based on the oxidation of bromopyrogallol red at λ＝520 nm. This method makes it possible to quantitize thallium in a range of 3.6×10－9 to 2.0×10－5 mol/L, with a detection limit (S/N＝3) of 1.42×10－9 mol/L. This procedure has been successfully applied to determine the ultra trace levels of thallium in the environmental samples, free from the interference of some diverse ions. The precision, expressed as relative standard deviation of three measurements, is better than 2.9%.     

A Novel Al(III)‐Selective Electrochemical Sensor Based on N,N′‐Bis(salicylidene)‐1,2‐phenylenediamine Complexes

A polyvinylchloride membrane sensor based on N,N′‐bis(salecylidene)‐1,2‐phenylenediamine (salophen) as membrane carrier was prepared and investigated as a Al³⁺‐selective electrode. The sensor exhibits a Nernstian response toward Al(III) over a wide concentration range (8.0×10^?7–3.0×10^?2 M), with a detection limit of 6.0×10^?7 M. The potentiometric response of the sensor is independent of the pH of the test solution in the pH range 3.2–4.5. The electrode possesses advantages of very fast response and high selectivity for Al³⁺ in comparison with alkali, alkaline earth and some heavy metal ions. The sensor was used as an indicator electrode, in the potentiometric titration of aluminum ion and in determination of Al³⁺ contents in drug, water and waste water samples.     

Novel Metronidazole Membrane Sensor Based on a 2,6‐(p‐N,N‐Dimethylaminophenyl)‐4‐Phenylthiopyrylium Perchlorate

A novel PVC‐based membrane sensor based on 2,6‐(p‐N,N‐dimethylaminophenyl)‐4‐phenylthiopyrylium perchlorate (DAPP) is described. The electrode exhibits a sub‐Nernstian response to 1‐(beta‐hydroxyethyl)‐2‐methyl‐5‐nitroimidazole (metronidazol) over a relatively wide concentration range (1.0 × 10^?1 to 1.0 × 10^?5 M) with a detection limit of 8.0 × 10^?6 M. The best performance was obtained with the membrane containing 30% poly (vinyl chloride), 50% dibutyl phthalate, 7% DAPP and 13% oleic acid. It has a fast response time (< 30 s) and can be used for at least four weeks without any major deviation. The proposed sensor revealed very good selectivity for metronidazole over a wide variety of common cations, anions and amino acids and could be used in the pH range of 6.0–7.5. It was successfully used for direct determination of metronidazole in an oral synthetic antiprotozoal as an antibacterial agent, in metronidazole tablets, and metronidazole injections and metronidazole gels.     

Living Polymerization of N,N‐Diphenylacrylamide with Triisobutylaluminum

Summary: N,N‐Diphenylacrylamide was polymerized in a living fashion with triisobutylaluminum in THF at 0 °C. The polymerization results showed an increase of molecular weight proportional to the amount of monomer consumed and a first‐order kinetics at −78 °C. The intermediates obtained with excess initiator at −78 °C revealed that the polymerization was initiated through 1,4‐addition of hydride from a triisobutyl group in the triisobutylaluminum and then proceeded through aluminum‐oxygen bond interchange.

N,N‐Diphenylacrylamide was polymerized in a living fashion with triisobutylaluminum in THF at 0 °C.     

稀土与N-对甲苯磺酰甘氨酸配合物的合成、晶体结构与性质

Complexes { [Ln（H20）2（TsGlyH）a]m·nH2O}∞ （Ln=La （1）, m=2, n=6; Nd （2）, m=2, n=7; Eu （3）, m=2, n= 0; Gd （4）, m=2, n=2; Er （5）, m=3, n=5 and Yb （6）, m=3, n=0, TsGlyH=N-p-tosylglycine monoanion）, have been prepared and characterized by IR spectra, elemental analysis, and TG-DTG 4 and 5 were structurally determined by X-ray diffraction analysis, showing that both of them are comprised of a one dimensional chain structure established via the coordination of μ-carboxylate groups from N-p-tosylglycinate to the corresponding lanthanide（Ⅲ） ions. The one dimensional chains were found inclined to form two-dimensional network via hydrogen bonding and then three dimensional network structure via non-classical hydrogen bonding. The fluorescence spectra of them revealed that the fluorescence of the ligand was quenched by Ln（Ⅲ） ions. In the tested biological activity experiments, they behaved inhibiting effects against the growth of bacteria, indicating that it is a potential medicament worthy of further investigation.     

Conformational analysis of N,N,N‐Trimethyl‐(3,3‐dimethylbutyl)ammonium iodide by NMR spectroscopy: a sterically hindered trans‐standard

A predominantly trans‐1,2‐disubstituted ethane system – N,N,N‐trimethyl‐(3,3‐dimethylbutyl)ammonium iodide – is of particular interest for conformational analysis, because it contains both an organic and a highly polar substituent, making it soluble and thus applicable to study in a large variety of solvents. The fraction of the trans conformer of this molecule in a wide range of protic and aprotic solvents was determined by the nuclear magnetic resonance proton couplings to be approximately 90%, in contrast to the previously assumed 100%. The consistently strong preference of the trans conformation should establish N,N,N‐trimethyl‐(3,3‐dimethylbutyl)ammonium iodide as a possibly useful ‘trans‐standard’ in conformational analysis, much more so than 1,2‐ditert‐butylethane, which has a poor solubility in many solvents. Copyright © 2013 John Wiley & Sons, Ltd.     

SET‐LRP of N,N‐dimethylacrylamide and of N‐isopropylacrylamide at 25 °C in protic and in dipolar aprotic solvents

The single‐electron transfer living radical polymerization (SET‐LRP) of water‐soluble monomers, N,N‐dimethylacrylamide (DMA) and N‐isopropylacrylamide (NIPAM), initiated with 2‐methylchloropropionate (MCP) in dipolar aprotic and protic solvents is reported. The radical polymerization of acrylamides is characterized by higher rate constants of propagation and bimolecular termination than acrylates. Therefore, the addition of CuCl₂ is required to mediate deactivation in the early stages of the reaction. Through the use of Cu(0)‐wire/Me₆‐TREN catalysis, conditions were optimized to minimize the amount of externally added CuCl₂ required to maintain a linear evolution of molecular weight and narrow molecular weight distribution. By using less CuCl₂ additive, the amount of soluble copper species that must ultimately be removed from the reaction mixture is reduced. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1752–1763, 2010