Adsorptive Stripping Voltammetric Determination of Trace Uranium with a Bismuth‐Film Electrode Based on the U(VI)→U(V) Reduction Step of the Uranium‐Cupferron Complex

This work reports the use of adsorptive stripping voltammetry (AdSV) for the determination of uranium on a preplated rotating‐disk bismuth‐film electrode (BiFE). The principle of the method relied on the complexation of U(VI) ions with cupferron and the subsequent adsorptive accumulation of the complex on the surface of the BiFE. The uranium in the accumulated complex was then reduced by means of a cathodic voltammetric scan while the analytically useful U(VI)→U(V) reduction signal was monitored. The experimental variables as well as potential interferences were investigated and the figures of merit of the method were established. Using the selected conditions, the 3σ limit of detection for uranium was 0.1 μg L^?1 at a preconcentration time of 480 s and the relative standard deviation was 4.7% at the 5 μg L^?1 level for a preconcentration time of 120 s (n=8). The accuracy of the method was established by analyzing a reference sea water sample.     

Electrochemical Reduction of Vanadium(V)‐Cupferron Complex,VO(cupf)2OH

Electrochemical reduction of vanadium(V) complex with cupferron (N‐nitroso‐N‐phenylhydroxylamine), V^VO(cupf)₂OH, has been studied by polarography in wide potential range to verify the catalytic mechanism of electroreduction of coordinated cupferron ligand. Reduction of the complex was studied in the concentration range from 2 ? 10^?5 M to 10^?3 M. Depending on the process conditions kinetics of catalytic reduction of coordinated cupferron is either controlled by adsorption step or governed by mixed control of diffusion and chemical reaction. Kinetic parameters of the reduction process are reported. Reduction of V^VO(cupf)₂OH complex is accompanied by adsorption and autoinhibition phenomena. V(II) ion in the surface bound complex of vanadium with cupferron catalyzes reduction of coordinated cupferronate ligands. In 1 mM solutions, the catalytic reduction of coordinated cupferron ligand shifts to more cathodic potentials due to formation of a monolayer of adsorbed vanadium(III)‐cupferron complexes. Reduction kinetics in the presence of tetraalkylammonium salt is consistent with multilayer cooperative adsorption of anionic vanadium(II)‐cupferron complex and tetraalkylammonium cations.     

Simple and fast voltammetric procedure of U(VI) determination in the presence of high concentrations of surface active substances

In this work, a simple and fast procedure for elimination of interfering surface active substances and for U(VI) adsorptive stripping voltammetric determination was developed. The adsorption in the form of U(VI)-cupferron complexes was performed, because as it was proved before, U(VI) forms with cupferron stable complexes, which were employed in voltammetric procedures. The procedure is based on two steps: the first is an adsorption of surface active substances onto an Amberlite XAD-16 or XAD-7 resin and the second is a voltammetric determination of U(VI) with a pulsed potential of accumulation alternate –0.65–0.3 V with the frequency of 0.5 Hz and then the differential pulse voltammogram was recorded, whereas the potential was scanned from –0.65 to –1.2 V. The detection limit estimated from three times the standard deviation for a low U(VI) concentrations was equal to 1.7 × 10^?10 mol L^?1 (7.2 × 10^?8 g L^?1). The linear range of U(VI) was observed over the concentration range from 5.0 × 10^?10 mol L^?1 (2.1 × 10^?7 g L^?1) to 2.0 × 10^?8 mol L^?1 (8.5 × 10^?6 g L^?1) for an accumulation time of 60 s. The influence of different kinds of surfactants, such as non-ionic, cationic and anionic on the uranium voltammetric signal was studied. The results confirm the possibility of U(VI) determination in water samples containing high concentrations of surface active substances even up to 50 mg L^?1.     

Mutual Separation and Determination of Th(IV) and U(VI) Using Arsenazo III as a Dye Collector Reagent by Flotation‐Spectrophotometric Method

This paper reports a simple and highly selective method for the separation, preconcentration, and determination of trace amounts of thorium and uranium in some complex samples via staircase flotation. The method is based on the initial flotation of the Th(IV)‐arsenazo III complex in the presence of U(VI) from a solution of 5 mol dm^?3 HCl, then reduction of U(VI) to U(IV) and repetition of the flotation step. In both steps, the floated complex was dissolved in a 5‐mL portion of methanol and its absorbance was measured at 655 nm, spectrophotometrically. For a 30‐mL portion of the sample, Beer's law was obeyed over the concentration ranges of 3.40 × 10^?7to 3.06 × 10^?6 mol dm^?3 for Th(IV) and3.40 × 10^?7 to 3.40 × 10^?6 mol dm^?3 for U(IV) with the apparent molar absorptivity of 4.20 × 10⁵ dm³ mol^?1 cm^?1 and 3.59 × 10⁵ dm³ mol^?1 cm^?1, respectively. The RSDs (n = 7) corresponding to 1.7 × 10^?6 mol dm^?3 of Th(IV) and U(IV) were obtained as 1.7% and 1.87%. The detection limits (7 blanks) for both the metal ions were found to be 1.7 × 10^?7 mol dm^?3. The important benefit of the method is that the determinations are free from the interference of almost all cations and anions found in the complex matrixes, such as seawater samples. The proposed method was also applied to reference materials, and the determinations were shown to have good agreement with the certified values.     

How to Determine Uranium Faster and Cheaper by Adsorptive Stripping Voltammetry in Water Samples Containing Surface Active Compounds

A modification of the voltammetric procedure for the determination of uranium in the presence of cupferron using hanging mercury drop electrode is presented. The pulsed potential accumulation was proposed for the minimization of interferences of surface active substances. The calibration plot for U(VI) in the presence of 2 ppm Tritonu X‐100 was linear from 1.7×10^?10 to 2.0×10^?8 mol L^?1 for an accumulation time of 60 s, with correlation coefficient of 0.996. The application of this method was tested in the determination of uranium in certified reference material NASS‐5 and river water samples.     

Binuclear Uranium(VI) Complexes with a “Pacman” Expanded Porphyrin: Computational Evidence for Highly Unusual Bis‐Actinyl Structures

On the basis of uranyl complexes reacting with a polypyrrolic ligand (H₄L), we explored structures and reaction energies of a series of new binuclear uranium(VI) complexes using relativistic density functional theory. Full geometry optimizations on [(UO₂)₂(L)], in which two uranyl groups were initially placed into the pacman ligand cavity, led to two minimum‐energy structures. These complexes with cation–cation interactions (CCI) exhibit unusual coordination modes of uranyls: one is a T‐shaped ( T ) skeleton formed by two linear uranyls {O_exo?U₂?O_endo→U₁(?O_exo)₂}, and another is a butterfly‐like ( B ) unit with one linear uranyl coordinating side‐by‐side to a second cis‐uranyl. The CCI in T was confirmed by the calculated longest distance and lowest stretching vibrational frequency of U₂?O_endo among the four U?O bonds. Isomer B is more stable than T , for which experimental tetrameric analogues are known. The formation of B and T complexes from the mononuclear [(UO₂)(H₂L)(thf)] ( M ) was found to be endothermic. The further protonation and dehydration of B and T are thermodynamically favorable. As a possible product, we have found a trianglelike binuclear uranium(VI) complex having a O?U?O?U?O unit.     

Removal, preconcentration and spectrophotometric determination of U(VI) from water samples using modified maghemite nanoparticles

Arsenazo III modified maghemite nanoparticles (A-MMNPs) was used for removing and preconcentration of U(VI) from aqueous samples. The effects of contact time, amount of adsorbent, pH and competitive ions was investigated. The experimental results were fitted to the Langmuir adsorption model in the studied concentration range of uranium (1.0 × 10^?4–1.0 × 10^?2 mol L^?1). According to the results obtained by Langmuir equation, the maximum adsorption capacity for the adsorption of U(VI) on A-MMNPs was 285 mg g^?1 at pH 7. The adsorbed uranium on the A-MMNPs was then desorbed by 0.5 mol L^?1 NaOH solution and determined spectrophotometrically. A preconcentration factor of 400 was achieved in this method. The calibration graph was linear in the range 0.04–2.4 ng mL^?1 (1.0 × 10^?10–1.0 × 10^?8 mol L^?1) of U(VI) with a correlation coefficient of 0.997. The detection limit of the method for determination of U(VI) was 0.01 ng mL^?1 and the relative standard deviation (R.S.D.) for the determination of 1.43 and 2.38 ng mL^?1 of U(VI) was 3.62% and 1.17% (n = 5), respectively. The method was applied to the determination of U(VI) in water samples.     

Two‐Electron Reductive Carbonylation of Terminal Uranium(V) and Uranium(VI) Nitrides to Cyanate by Carbon Monoxide

Two‐electron reductive carbonylation of the uranium(VI) nitride [U(Tren^TIPS)(N)] ( 2 , Tren^TIPS=N(CH₂CH₂NSiiPr₃)₃) with CO gave the uranium(IV) cyanate [U(Tren^TIPS)(NCO)] ( 3 ). KC₈ reduction of 3 resulted in cyanate dissociation to give [U(Tren^TIPS)] ( 4 ) and KNCO, or cyanate retention in [U(Tren^TIPS)(NCO)][K(B15C5)₂] ( 5 , B15C5=benzo‐15‐crown‐5 ether) with B15C5. Complexes 5 and 4 and KNCO were also prepared from CO and the uranium(V) nitride [{U(Tren^TIPS)(N)K}₂] ( 6 ), with or without B15C5, respectively. Complex 5 can be prepared directly from CO and [U(Tren^TIPS)(N)][K(B15C5)₂] ( 7 ). Notably, 7 reacts with CO much faster than 2 . This unprecedented f‐block reactivity was modeled theoretically, revealing nucleophilic attack of the π* orbital of CO by the nitride with activation energy barriers of 24.7 and 11.3 kcal mol^?1 for uranium(VI) and uranium(V), respectively. A remarkably simple two‐step, two‐electron cycle for the conversion of azide to nitride to cyanate using 4 , NaN₃ and CO is presented.     

Construction of a new solid-state U(VI) ion-selective electrode based on polypyrrole conducting polymer

In this study, a potentiometric sensor based on a pencil graphite electrode (PGE) coated with polypyrrole doped with uranyl zinc acetate (termed PGE/PPy/U) have been prepared for potentiometric determination of uranyl in aqueous solutions. Electropolymerization reaction for preparing of U(VI) sensor electrode was carried via applying a constant current of 1.0 mA on PGA working electrode in a solution containing 8.0 mM pyrrole and 0.8 mM ZnUO₂(CH₃COO)₄ salt. The constructed electrode displayed a linear and near Nernstian response (22.60 ± 0.40 mV/decade) to U(VI) ions in the concentration range of 1.0 × 10^?6–1.0 × 10^?2 M. A detection limit of 6.30 × 10^?7 M and a fast response time (≤12 s) was observed during measurements. The working pH range of the electrode was 4.0–8.0 and lifetime of the sensor was at least 60 days. The electrode revealed good selectivity with respect to many cations including alkali, alkaline earth, transition and heavy metal ions. The introduced uranyl electrode was used for measurement of U(VI) ion in real samples without any serious inferences from other ions.     

Oxo–Group‐14‐Element Bond Formation in Binuclear Uranium(V) Pacman Complexes

Simple and versatile routes to the functionalization of uranyl‐derived U^V–oxo groups are presented. The oxo‐lithiated, binuclear uranium(V)–oxo complexes [{(py)₃LiOUO}₂(L)] and [{(py)₃LiOUO}(OUOSiMe₃)(L)] were prepared by the direct combination of the uranyl(VI) silylamide “ate” complex [Li(py)₂][(OUO)(N”)₃] (N”=N(SiMe₃)₂) with the polypyrrolic macrocycle H₄L or the mononuclear uranyl (VI) Pacman complex [UO₂(py)(H₂L)], respectively. These oxo‐metalated complexes display distinct U? O single and multiple bonding patterns and an axial/equatorial arrangement of oxo ligands. Their ready availability allows the direct functionalization of the uranyl oxo group leading to the binuclear uranium(V) oxo–stannylated complexes [{(R₃Sn)OUO}₂(L)] (R=nBu, Ph), which represent rare examples of mixed uranium/tin complexes. Also, uranium–oxo‐group exchange occurred in reactions with [TiCl(OiPr)₃] to form U‐O? C bonds [{(py)₃LiOUO}(OUOiPr)(L)] and [(iPrOUO)₂(L)]. Overall, these represent the first family of uranium(V) complexes that are oxo‐functionalised by Group 14 elements.     

Determination of Zirconium and Vanadium in Natural Waters by Adsorptive Stripping Voltammetry in the Presence of Cupferron,Oxalic Acid and 1,3‐Diphenylguanidine

A sequential AdSV method based on the accumulation of Zr(IV) and V(V) as cupferron‐oxalic acid‐1,3‐diphenylguanidine (COD) complexes at the HMDE was used to determine traces of these metals in samples with different ionic strengths. DP mode, E_ads ?0.6 and ?0.2 V (vs. Ag/AgCl, 3 mol L^?1 KCl), t_ads 400 and 20 s and 10 and 60 mV s^?1 scan rates were used for Zr(IV) and V(V), respectively. E_peak were ?0.95 (Zr(IV)‐COD) and ?0.65 V(V(V)‐COD). The methodology was applied in samples of rivers, estuaries (in Germany and Brazil) and coastal and open seawater.     

Adsorptive Cathodic Stripping Voltammetric Determination of Uranium(VI) in Presence of N‐Phenylanthranilic Acid

N‐Phenylanthranilic acid was used as a complexing agent for determination of uranium(VI) by adsorptive cathodic stripping voltammetry. Under the optimal experimental conditions of the experimental parameters, the peak current was proportional to the concentration of U(VI) in the range 0.75–30 ng mL^?1 and the detection limit was 0.036 ng mL^?1. The influence of possible interferences was investigated. The method was applied for determination of uranium in waste water from uranium conversion facility and natural water samples. Application of the method for simultaneous determination of U(VI) and Cu(II) showed that these ions could be simultaneously determined in a single scan at relatively wide concentration range.     

Characteristics of Lariat Crown Ether‐Copper (II) Ion‐Selective Electrodes

An ion‐selective electrode using ionophore 2′‐picolyl sym‐dibenzo‐16‐crown‐5 ether as membrane carrier, sodium tetraphenylborate (NaTPB) as an anion excluder, and 2‐nitrophenyl‐octyl ether (NOPE) as the plasticing solvent mediator has been successfully developed. This electrode exhibits al in ear response with a slope of 42 mV/decade in concentration ranging from 10^?5 molL^?1 to 10^?1 molL^?1, slightly larger than the 30 mV expected from the one‐to‐one complex. The reason for the super‐Nernstain slope is the partial dimmer formation in side the membrane of the electrode, because this dimmer [Cu(C₂₅H₂₇NO₆)₂(H₂O)₂] 2ClO₄, has been isolated and confirmed by single crystal X‐ray crystallography. The detection limit for the cop per (II) ion was estimated to be 1 × 10^?6 molL^?1. Electrades composed of other plasticing solvent mediators such as tris(2‐ethylhexyl) phosphate (TOP), bis (2‐ethylhexyl) sebacate (DOS) and dibutyl phthalate (DBP) were also investigated. Stability constants (logKs) of the two to one and the one to one 2‐picolylsym‐dibenzo‐16‐crown‐5 ether‐Cu (II) complexes have been determined by potentiometric titration in methanol.     

Determination of Cr(VI) with Selective Sensing of Cr(VI) Anions by a PVC‐Membrane Electrode Based on Quinaldine Red

A dichromate‐selective PVC‐membrane electrode based on Quinaldine Red (an acridinium derivative) is described. The electrode exhibits rapid (< 30 s) and linear response to the activity of Cr(VI) anions in the range of 5.2 × 10^?6 ?1.0 × 10^?1 M dichromate with the limit of detection 2.5 × 10^?6 Mof Cr₂O₇^2?. The sensor is used as an indicator electrode in potentiometric determination of Cr(VI) anions and is also suitable for end‐point indication in the titrations of proper metal ions with dichromate under laboratory conditions. The proposed electrode has been applied to the direct potentiometric determination of Cr(VI) anions in water samples with satisfactory results.     

Thermodynamic parameters and sorption of U(VI) on ACSD

This paper discusses the sorption properties for U(VI) by alginate coated CaSO₄·2H₂O sepiolite and calcined diatomite earth (Kieselguhr) (ACSD). The removal of U(VI) from aqueous solution by sorption onto ACSF in a single component system with various contact times, pH, temperatures, and initial concentrations of U(VI) was investigated. The sorption patterns of uranium on the composite adsorbent followed the Langmuir, Freundlich and Dubinin-Radushkhevic (D-R) isotherms. The Freundlich, Langmuir, and D-R models have been applied and the data correlated well with Freundlich model and that the sorption was physical in nature (sorption energy, E _a = 17.05 kJ/mol). The thermodynamic parameters such as variation of enthalpy ΔH, variation of entropy ΔS and variation of Gibbs free energy ΔG were calculated from the slope and intercept of lnK ₀ vs. 1/T plots. Thermodynamic parameters (ΔH _ads = 31.83 kJ/mol, ΔS _ads = 167 J/mol·K, ΔG ^o _ads (293.15 K) = −17.94 kJ/mol) showed the endothermic heat of sorption and the feasibility of the process. The thermodynamics of U(VI) ion/ACSD system indicates the spontaneous and endothermic nature of the process. It was noted that an increase in temperature resulted in a higher uranium loading per unit weight of the adsorbent.     

Determination of uranium(VI) in sea water by cathodic stripping voltammetry of complexes with catechol

Polarographic (d.c.) measurements showed that complex ions of uranium(VI) with catechol adsorb on the dropping mercury electrode. This effect is used to determine uranium(VI) directly in sea water. Optimal conditions include pH 6.8, 2 × 10^?3 M catechol, and a collection potential between ?0.1 and ?0.4 V (vs. Ag/AgCl) at a hanging mercury drop electrode. The cathodic scan is made with the linear-scan or differential-pulse mode (d.p.c.s.v.). The detection limit with the d.p.c.s.v, mode is 3 × 10^?10 M after a collection period of 2.5 min. Between pH 6 and 8, the peak height increases with pH and with catechol concentration up to 5 × 10^?3 M. There is linear relationship between the collection time and the measured peak height until the drop surface becomes saturated. With a collection period of 3 min, the reduction current increases linearly with the metal concentration up to about 5 × 10^?3 M U(VI). The maximum adsorption capacity of the mercury drop is 4.4 × 10^?10 mol cm²; each complex ion then occupies 0.38 nm², equivalent to the size of about one catechol molecule. Interference by high concentrations of Fe(III) is overcome by selectively adsorbing U(VI) at a collection potential near the reduction potential of Fe(III). Organic surfactants reduce the peak height for uranium by up to 75% at unnaturally high concentrations only (4 mg l^?1 Triton X-100). Competition by high concentrations of Cu(II) for space on the surface of the drop is eliminated by addition of EDTA.     

Efficacious selective separation of U(VI) over Mo(VI) using novel 2,9-diamide-1,10-phenanthroline ligands: Liquid-liquid extraction and coordination chemistry

Uranium and molybdenum are important strategic elements. The production of ⁹⁹Mo and the hydrometallurgical process of uranium ore face difficult problems of separation of uranium and molybdenum. In this study, the four phenanthroline diamide ligands were synthesized, and extraction and stripping experiments were performed under different conditions to evaluate the potential application of these ligands for separation of U(VI) over Mo(VI). With the growth of alkyl chain, the solubility of ligands could be greatly improved, and the separation effect of U(VI) over Mo(VI) gradually increased. The SF_U/Mo were around 10,000 at 4 mol/L HNO₃. Three stripping agents were tested with the stripping efficiency of Na₂CO₃ (5%) > H₂O > HNO₃ (0.01 mol/L). The stripping percentages of the three stripping agents were all close to unity, indicating that the ligands had the potential to be recycled. The chemical stoichiometry of U(VI) complexes with ligands was evaluated as 1:1 using electrospray ionization mass spectrometry, ultraviolet visible spectroscopy and single-crystal X-ray diffraction. The consistency between theoretical calculation and experimental results further explains the coordination mechanism.     

Adsorptive removal of U(VI) and Th(IV) from aqueous solutions using polymer-based electrospun PEO/PLLA fibrous membranes

Fibrous membranes based on poly(ethylene oxide) and poly(l-lactide) fabricated by electrospinning were evaluated for the first time as substrates for the adsorption of tetravalent thorium (Th(IV)) and hexavalent uranium (U(VI)) from aqueous media. The membranes consisted of microfibers with diameters of approximately 2 μm as revealed by scanning electron microscopy. The adsorption of Th(IV) and U(VI) on the membrane was investigated as a function of pH, ionic strength and initial metal concentration under normal atmospheric conditions. The experimental data indicated increased affinity of the membrane for Th(IV) and U(VI), which was pH depended and reaches maximum values (>90 %) for Th(IV) and U(VI) at pH 3 and pH 6.5, respectively. The maximum adsorption capacity (q _max) at optimum conditions was evaluated from the Langmuir isotherm and was found to amount 50.08 and 9.3 mmol kg^?1 for Th(IV) and U(VI), respectively. In addition, studies on the effect of ionic strength on the adsorption efficiency did not show any significant effect indicating that the adsorption of Th(IV) and U(VI) on the membrane was most probably based on specific interactions and the formation of inner-sphere surface complexes. The significantly higher adsorption efficiency of the membrane for Th(IV) in acidic media (pH ≤ 3) could be utilized for a pH-triggered, selective separation of Th(IV) from U(VI) from aqueous media.     

Application of Polymer‐Modified Hanging Mercury Drop Electrode in the Indirect Determination of Certain β‐Lactam Antibiotics by Differential Pulse,Ion‐Exchange Voltammetry

A selective and sensitive polymer‐modified electrode was developed for β‐lactam antibiotics (cefaclor, amoxycillin and ampicillin) present in formulated and blood plasma samples for the quantitative analysis in aqueous environment. The detection was made using an ion‐exchange voltammetric technique, in differential pulse mode, on poly(N‐chloranil N,N,N′,N′‐tetramethylethylene diammonium dichloride)‐modified hanging mercury drop electrode of a three‐electrode system (PAR Model 303A) attached with a Polarographic Analyzer/Stripping Voltammeter (PAR Model 264A). Antibiotics, which are electroinactive compounds, were essentially converted to their electroactive oxazolone analogues through acid treatment under drastic conditions (0.1 mol L^?1 HCl, ～85 °C, 2 h). These analytes in the form of their respective oxazolones were indirectly analyzed by oxazolone entrapment in the polymeric film through ion‐exchange process at modified electrode surface (accumulation potential ?0.20 V (vs. Ag/AgCl), accumulation time 120 s, pH 7.4, KH₂PO₄‐NaOH buffer (ionic strength 0.1 mol L^?1), scan rate 10 mV s^?1, pulse amplitude 25 mV). The limit of detection of cefaclor‐derived oxazolone was found to be 2.12 nmol L^?1 (0.82 ppb, S/N 3, RSD 3.21%) in terms of cefaclor (a representative β‐lactam) concentration.