General and systematic synthetic entry to carotenoid natural products

A general synthetic method of carotenoid natural products has been developed, in which the systematic chain extension and termination processes were applied. The syntheses of the chain extension and termination units were greatly improved by the use of the common intermediate, 1-bromo-4-chloro-3-methyl-2-butene (8), in a short and highly efficient way. The C₁₀ chain initiation β-cyclogeranyl sulfone (3) was coupled with the C₅ chain extension unit to give the C₁₅ chain-extended allylic sulfone after chemoselective sulfide oxidation. This chain-extended C₁₅ allylic sulfone underwent the Julia olefination reaction with the C₅ and the C₁₀ chain termination units to give retinol (1) and β-carotene (2), respectively.     

Synthesis of a Novel C2‐Symmetric Bis‐oxazoline (=Bis[4,5‐dihydrooxazole]) and Its Application as Chiral Ligand in Asymmetric Transition Metal Catalysis

The new C₂‐symmetric bis‐oxazoline (=bis[4,5‐dihydrooxazole]) 2 with a chiral trans‐(2R,3R)‐2,3‐bis(3,5‐diphenylphenyl)cyclopropylidene (=trans‐(2R,3R)‐2,3‐bis([1,1′: 3′,1″‐terphenyl]‐5′‐yl)cyclopropylidene) backbone was efficiently synthesized (Scheme). All synthetic steps were easy to perform and led to the desired product in good overall yields. Compound 2 was tested and compared as ligand in several enantioselective catalytic reactions such as palladium(0)‐catalyzed enantioselective allylic alkylations and copper(I)‐catalyzed enantioselective cyclopropanations and aziridinations.     

Bis[(μ‐cyclopentylamino‐N:N)dimethyl­aluminium(III)]

Reaction of AlMe₃ with NH₂(C₅H₉) caused the evolution of methane and produced the dimeric species bis(μ‐cyclo­pentyl­amino‐N:N)bis[dimethylaluminium(III)], [Al(CH₃)₂‐(C₅H₁₀N)]₂, which was found to adopt a cis configuration of cyclopentyl groups about a bent AlNAlN ring (which has twofold crystallographic symmetry) instead of the more common trans arrangement.     

Ligand‐forced dimerization of copper(I)–olefin complexes bearing a 1,3,4‐thiadiazole core

As an important class of heterocyclic compounds, 1,3,4‐thiadiazoles have a broad range of potential applications in medicine, agriculture and materials chemistry, and were found to be excellent precursors for the crystal engineering of organometallic materials. The coordinating behaviour of allyl derivatives of 1,3,4‐thiadiazoles with respect to transition metal ions has been little studied. Five new crystalline copper(I) π‐complexes have been obtained by means of an alternating current electrochemical technique and have been characterized by single‐crystal X‐ray diffraction and IR spectroscopy. The compounds are bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₆H₉N₃S)₂], (1), bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[(tetrafluoroborato)copper(I)], [Cu₂(BF₄)₂(C₆H₉N₃S)₂], (2), μ‐aqua‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₅H₇N₃S₂)₂(H₂O)], (3), μ‐aqua‐(hexafluorosilicato)bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I)–acetonitrile–water (2/1/4), [Cu₂(SiF₆)(C₅H₇N₃S₂)₂(H₂O)]·0.5CH₃CN·2H₂O, (4), and μ‐benzenesulfonato‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I) benzenesulfonate–methanol–water (1/1/1), [Cu₂(C₆H₅O₃S)(C₅H₇N₃S₂)₂](C₆H₅O₃S)·CH₃OH·H₂O, (5). The structure of the ligand 5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine (Mepeta ), C₆H₉N₃S, was also structurally characterized. Both Mepeta and 5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine (Pesta ) (denoted L ) reveal a strong tendency to form dimeric {Cu₂L ₂}²⁺ fragments, being attached to the metal atom in a chelating–bridging mode via two thiadiazole N atoms and an allylic C=C bond. Flexibility of the {Cu₂(Pesta )₂}²⁺ unit allows the Cu^I atom site to be split into two positions with different metal‐coordination environments, thus enabling the competitive participation of different molecules in bonding to the metal centre. The Pesta ligand in (4) allows the Cu^I atom to vary between water O‐atom and hexafluorosilicate F‐atom coordination, resulting in the rare case of a direct Cu^I…FSiF₅²⁻ interaction. Extensive three‐dimensional hydrogen‐bonding patterns are formed in the reported crystal structures. Complex (5) should be considered as the first known example of a Cu^I(C₆H₅SO₃) coordination compound. To determine the hydrogen‐bond interactions in the structures of (1) and (2), a Hirshfeld surface analysis has been performed.     

Oxidation of γ-stannyl sulfides by monochloramine CB and hydrogen peroxide

The first γ-trimethylstannyl sulfimide, Me³Sn(CH₂)₃S(=NSO₂Ar)C₅H₁₁-n, was synthesized by oxidative imination of Me₃Sn(CH₂)₃SC₅H₁₁-n with ArSO₂(Na)Cl (Ar=C₆H₄Cl-4). Oxidation of γ-trimethylstannyl sulfimide by an alkaline solution of H₂O₂ gave γ-trimethylstannyl sulfoximide, Me₃Sn(CH₂)₃S(O)(=NSO₂Ar)C₅H₁₁-n, and γ-trimethylstannyl sulfone, Me₃Sn(CH₂)₃SO₂C₅H₁₁-n, the latter compound resulting from hydrolysis of the arylsulfimide group. Oxidation of stannyl sulfide by hydrogen peroxide yielded γ-trimethylstannyl sulfoxide, Me₃Sn(CH₂)₃S(O)C₅H₁₁-n (under mild conditions) or γ-trimethylstannyl sulfone (under more severe conditions). Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 371–374, February, 1997.     

Three zinc(II) and cadmium(II) complexes containing 4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole and polynitrile ligands: synthesis,molecular and supramolecular structures,and photoluminescence properties

Three photoluminescent complexes containing either Zn^II or Cd^II have been synthesized and their structures determined. Bis[4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole‐κ²N ¹,N ⁵]bis(dicyanamido‐κN ¹)zinc(II), [Zn(C₁₂H₁₀N₆)₂(C₂N₃)₂], (I), bis[4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole‐κ²N ¹,N ⁵]bis(dicyanamido‐κN ¹)cadmium(II), [Cd(C₁₂H₁₀N₆)₂(C₂N₃)₂], (II), and bis[4‐amino‐3,5‐bis(pyridin‐2‐yl)‐1,2,4‐triazole‐κ²N ¹,N ⁵]bis(tricyanomethanido‐κN ¹)cadmium(II), [Cd(C₁₂H₁₀N₆)₂(C₄N₃)₂], (III), all crystallize in the space group P , with the metal centres lying on centres of inversion, but neither analogues (I) and (II) nor Cd^II complexes (II) and (III) are isomorphous. A combination of N—H…N and C—H…N hydrogen bonds and π–π stacking interactions generates three‐dimensional framework structures in (I) and (II), and a sheet structure in (III). The photoluminescence spectra of (I)–(III) indicate that the energies of the π–π* transitions in the coordinated triazole ligand are modified by minor changes of the ligand geometry associated with coordination to the metal centres.     

Luminescent Amphiphilic 2,6‐Bis(1‐alkylpyrazol‐3‐yl)pyridyl Platinum(II) Complexes: Synthesis,Characterization, Electrochemical,Photophysical, and Langmuir–Blodgett Film Formation Studies

Two series of novel platinum(II) 2,6‐bis(1‐alkylpyrazol‐3‐yl)pyridyl (N5Cn) complexes, [Pt(N5Cn)Cl][X] ( 1 – 9 ) and [Pt(N5Cn)(C?CR)][X] ( 10 – 13 ) (X=trifluoromethanesulfonate (OTf) or PF₆; R=C₆H₅, C₆H₄‐p‐CF₃ and C₆H₄‐p‐N(C₆H₅)₂), with various chain lengths of the alkyl groups on the nitrogen atom of the pyrazolyl units have been successfully synthesized and characterized. Their electrochemical and photophysical properties have been studied. Some of their molecular structures have also been determined by X‐ray crystallography. Two amphiphilic platinum(II) 2,6‐bis(1‐tetradecylpyrazol‐3‐yl)pyridyl (N5C14) complexes, [Pt(N5C14)Cl]PF₆ ( 7 ) and [Pt(N5C14)(C?CC₆H₅)]PF₆ ( 13 ), were found to form stable and reproducible Langmuir–Blodgett (LB) films at the air–water interface. The characterization of such LB films has been investigated by the study of their surface pressure–area (π–A) isotherms, UV/Vis spectroscopy, XRD, X‐ray photoelectron spectroscopy (XPS), FTIR, and polarized IR spectroscopy. The luminescence property of 13 in LB films has also been studied.     

Oxidation of E,E‐bis(3‐bromo‐1‐chloro‐1‐propen‐2‐yl) chalcogenides and use of E,E‐bis(3‐bromo‐1‐chloro‐1‐propen‐2‐yl)sulfone in heterocyclization with primary amines

Oxidation of E,E‐bis(3‐bromo‐1‐chloro‐1‐propen‐2‐yl) sulfide and selenide with hydrogen peroxide in chloroform/acetic acid or acetic acid affords previously unknown E,E‐bis(3‐bromo‐1‐chloro‐1‐propen‐2‐yl) sulfoxide, selenoxide, and sulfone. The reaction of E,E‐bis(3‐bromo‐1‐chloro‐1‐propen‐2‐yl) sulfone with primary amines in ethanol in the presence of NaHCO₃ or Na₂CO₃ is found to lead not only to heterocyclization but also to alcoholysis of the chloromethylidene groups in the intermediate bis(chloromethylidene) derivatives of thiomorpholine‐1,1‐dioxides to afford N‐organyl‐2(E),6(E)‐bis(ethoxymethylidene) thiomorpholine‐1,1‐dioxides as final products.     

Highly Efficient Biomimetic Oxidation of Sulfide to Sulfone by Hydrogen Peroxide in the Presence of Manganese meso‐Tetraphenylporphyrin

Low amount of manganese meso‐tetraphenyl porphyrin [Mn(TPP)] was used for highly efficient selective oxidation of sulfide to sulfone by hydrogen peroxide at room temperature. Sulfones were produced directly with yields generally around 90% while the catalyst concentration was only 4×10^?5 mol·L^?1. In a large‐scale experiment of thioanisole oxidation, the isolated yield of sulfone (87%) was obtained and the turnover number (TON) reached up to 8×10⁶, which is the highest TON for the oxidation systems of sulfide to sulfone catalyzed by metalloporphyrins.     

Judiciously balancing steric and electronic influences on 2,3‐diiminobutane‐based Pd(II) complexes in nourishing polyethylene properties

A new series of palladium complexes ( Pd1–Pd5 ) ligated by symmetrical 2,3‐diiminobutane derivatives, 2,3‐bis[2,6‐bis{bis(4‐FC₆H₄)₂CH}₂‐4‐(alkyl)C₆H₂N]C₄H₆ (alkyl = Me L1 , Et L2 , ⁱ Pr L3 , ^t Bu L4 ) and 2,3‐bis[2,6‐bis{bis(C₆H₅)₂CH}₂‐4‐{(CH₃)₃C}C₆H₂N]C₄H₆ L5 , have been prepared and well characterized, and their catalytic scope toward ethylene polymerization have been investigated. Upon activation with MAO, all palladium complexes ( Pd1–Pd5) exhibited good activities (up to 1.44 × 10⁶ g (PE) mol^?1(Pd) h^?1) and produced higher molecular weight polyethylene in the range of 10⁵ g mol^?1 with precise molecular weight distribution (M _w/M _n = 1.37–1.77). One of the long‐standing limiting features of the Brookhart type α‐diimine Pd(II) catalysts is that they produce highly branched (ca. 100/1000 C atoms) and totally amorphous polymer. Conversely, herein Pd5 produced polymers having dramatically lower branching number (28/1000) as well as improved melting temperature up to 73.1 °C showing well‐controlled linear architecture, and very similar to polyethylene materials generated by early‐transition‐metal based catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3214–3222     

Vinyl sulfones

Four neutral vinyl sulfones, two of which are paired with phosphonate groups, are described. The compounds are diisopropyl (2‐phenylethenylsulfonylmethyl)phosphonate, C₁₅H₂₃O₅PS, (I), diisopropyl {[2‐(7‐methoxy‐1,3‐benzodioxol‐5‐yl)ethenylsulfonyl]methylsulfonylmethyl}phosphonate, C₁₈H₂₇O₁₀PS₂, (II), bis(trans‐2‐phenylethenyl) sulfone, C₁₆H₁₄O₂S, (III), and bis(trans‐2‐phenylethenylsulfonyl)methane, C₁₇H₁₆O₄S₂, (IV). Their structures can be considered as highly functionalized mimics of mono‐, di‐ and triphosphates. These phosphate isosteres are currently of interest as agents for enzyme inhibition in both cancer and HIV therapy. All except one of the compounds has Z′ > 1. The lone exception is (IV), a disulfone with twofold crystallographic symmetry. Geometrically, the sulfone functionality is found to be a good mimic for phosphate. The principal effect of the vinyl group is to shorten the S—C(vinyl) distance relative to the S—CH₂ distance by ca 0.05 Å. The S—C—S and S—C—P backbones resemble the P—O—P backbone but are not identical because the S—C and P—C distances are longer than the P—O distance and the S—C—S and S—C—P angles are more acute than the P—O—P angle. No prior crystal structures of comparable compounds have been published.     

Enantioselective Allylic Alkylation Catalyzed by Novel C2‐Symmetric Bisphosphinites

In this article, we present our results concerning new C₂‐symmetric bisphosphinites with a (1R,2R)‐1,2‐bis([1,1′: 3′,1″‐terphenyl]‐5′‐yl)ethane backbone. For the given chirality of the backbone, derivatives with aromatic and aliphatic substituents at the donor P‐atoms were synthesized with moderate yields in a straightforward manner. These compounds were evaluated in the Pd⁰‐catalyzed enantioselective allylic alkylations (up to 67% ee).     

A Bis‐Sulfonyl O,C,O Aryl Pincer Ligand and its Tin(II) Complex: Synthesis,Structural Studies,and DFT Calculations

The efficiency of the deprotonated aryl bis‐sulfone [2,6‐{(p‐tolyl)SO₂}₂C₆H₃]^? as an O,C,O‐coordinating pincer‐type ligand was described. The bis‐sulfone precursor was synthesized using a straightforward palladium‐catalyzed cross‐coupling reaction. As a result of directed ortho metalation (DoM) through sulfonyl groups, a selective lithiation of the aryl group was achieved and the corresponding carbanion was isolated and its structure determined by single‐crystal X‐ray diffraction analysis. A heteroleptic tin(II) complex has been prepared by a nucleophilic substitution reaction. Crystallographic analysis and DFT calculations indicate that the bis‐sulfonyl moiety acts as a new O,C,O‐coordinating pincer‐type ligand with intramolecular S?O coordination to a tin(II) center. The cis form with the two nonbonded oxygen atoms of the sulfonyl groups on the same side is preferentially obtained.     

Synthesis of vitamin A via sulfones: A C15 sulfone route.

A Synthesis of vitamin A has been achieved by alkylating a β-ionylidene-ethyl (C₁₅) aromatic sulfone with 1-acetoxy-3-chlormethyl-2-butene (C₅) followed by elimination of the corresponding sulfinic acid.     

A Bis‐Sulfonyl O,C,O Aryl Pincer Ligand and its Tin(II) Complex: Synthesis,Structural Studies,and DFT Calculations

The efficiency of the deprotonated aryl bis‐sulfone [2,6‐{(p‐tolyl)SO₂}₂C₆H₃]⁻ as an O,C,O‐coordinating pincer‐type ligand was described. The bis‐sulfone precursor was synthesized using a straightforward palladium‐catalyzed cross‐coupling reaction. As a result of directed ortho metalation (DoM) through sulfonyl groups, a selective lithiation of the aryl group was achieved and the corresponding carbanion was isolated and its structure determined by single‐crystal X‐ray diffraction analysis. A heteroleptic tin(II) complex has been prepared by a nucleophilic substitution reaction. Crystallographic analysis and DFT calculations indicate that the bis‐sulfonyl moiety acts as a new O,C,O‐coordinating pincer‐type ligand with intramolecular SO coordination to a tin(II) center. The cis form with the two nonbonded oxygen atoms of the sulfonyl groups on the same side is preferentially obtained.     

Selective oxidation of organic compounds using pyridinium-1-sulfonate fluorochromate, C5H5NSO3H [CrO3F] ( PSFC )

Efficient selective oxidation of primary, secondary, and benzylic alcohols to the corresponding carbonyl compounds by a new chromium oxidizing reagent, pyridinium-1-sulfonate fluorochromate, C₅H₅NSO₃H [CrO₃F] (PSFC) is reported. Various cholesterol derivatives were easily converted to related oxocholesterol from allylic oxidation at lower temperature in comparison to other general oxidants. This oxidation procedure is simple and affords good yields.     

In situ synthesis of mononuclear copper(II) complexes of the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine

Two mononuclear copper complexes, {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}(3,5‐dimethyl‐1H‐pyrazole‐κN²)(perchlorato‐κO)copper(II) perchlorate, [Cu(ClO₄)(C₅H₈N₂)(C₁₂H₁₉N₅)]ClO₄, (I), and {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}bis(3,5‐dimethyl‐1H‐pyrazole‐κN²)copper(II) bis(hexafluoridophosphate), [Cu(C₅H₈N₂)₂(C₁₂H₁₉N₅)](PF₆)₂, (II), have been synthesized by the reactions of different copper salts with the tripodal ligand tris[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (TDPA) in acetone–water solutions at room temperature. Single‐crystal X‐ray diffraction analysis revealed that they contain the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (BDPA), which cannot be obtained by normal organic reactions and has thus been captured in the solid state by in situ synthesis. The coordination of the Cu^II ion is distorted square pyramidal in (I) and distorted trigonal bipyramidal in (II). The new in situ generated tridentate BDPA ligand can act as a meridional or facial ligand during the process of coordination. The crystal structures of these two compounds are stabilized by classical hydrogen bonding as well as intricate nonclassical hydrogen‐bond interactions.     

A structural study of (1RS,2SR,3RS,4SR,5RS)‐2,4‐dibenzoyl‐1,3,5‐triphenylcyclohexan‐1‐ol chloroform hemisolvate and (1RS,2SR,3RS,4SR,5RS)‐2,4‐dibenzoyl‐1‐phenyl‐3,5‐bis(2‐methoxyphenyl)cyclohexan‐1‐ol

(1RS,2SR,3RS,4SR,5RS)‐2,4‐Dibenzoyl‐1,3,5‐triphenylcyclohexan‐1‐ol or (4‐hydroxy‐2,4,6‐triphenylcyclohexane‐1,3‐diyl)bis(phenylmethanone), C₃₈H₃₂O₃, (1), is formed as a by‐product in the NaOH‐catalyzed synthesis of 1,3,5‐triphenylpentane‐1,5‐dione from acetophenone and benzaldehyde. Single crystals of the chloroform hemisolvate, C₃₈H₃₂O₃·0.5CHCl₃, were grown from chloroform. The structure has triclinic (P) symmetry. One diastereomer [as a pair of (1RS,2SR,3RS,4SR,5RS)‐enantiomers] of (1) has been found in the crystal structure and confirmed by NMR studies. The dichoromethane hemisolvate has been reported previously [Zhang et al. (2007). Acta Cryst. E 63 , o4652]. (1RS,2SR,3RS,4SR,5RS)‐2,4‐Dibenzoyl‐3,5‐bis(2‐methoxyphenyl)‐1‐phenylcyclohexan‐1‐ol or [4‐hydroxy‐2,6‐bis(2‐methoxyphenyl)‐4‐phenylcyclohexane‐1,3‐diyl]bis(phenylmethanone), C₄₀H₃₆O₅, (2), is also formed as a by‐product, under the same conditions, from acetophenone and 2‐methoxybenzaldehyde. Crystals of (2) have been grown from chloroform. The structure has orthorhombic (Pca2₁) symmetry. A diastereomer of (2) possesses the same configuration as (1). In both structures, the cyclohexane ring adopts a chair conformation with all bulky groups (benzoyl, phenyl and 2‐methoxyphenyl) in equatorial positions. The molecules of (1) and (2) both display one intramolecular O—H...O hydrogen bond.     

Palladium-Catalyzed Asymmetric Trifluoromethylated Allylic Alkylation of N-Substituted Glycine Ethyl Esters with α-(Trifluoromethyl)alkenyl Acetates

An efficient strategy for asymmetric trifluoromethylated allylic alkylation of easily available N-substituted glycine ethyl esters with α-(trifluoromethyl)alkenyl acetates has been developed. Catalyzed by a [Pd(C₃H₅)Cl]₂/(R)-BINAP, various trifluoromethyl-containing N-substituted glycine ethyl ester derivatives are afforded with good yields and excellent enantioselectivities. The product can be readily converted into diverse fluoro-substituted species, which shows the practicability of this method.     

Crystallographic evidence for unintended benzisothiazolinone 1‐oxide formation from benzothiazinones through oxidation

1,3‐Benzothiazin‐4‐ones (BTZs) are a promising new class of drugs with activity against Mycobacterium tuberculosis, which have already reached clinical trials. A product obtained in low yield upon treatment of 8‐nitro‐2‐(piperidin‐1‐yl)‐6‐(trifluoromethyl)‐4H‐benzothiazin‐4‐one with 3‐chloroperbenzoic acid, in analogy to a literature report describing the formation of sulfoxide and sulfone derived from BTZ043 [Tiwari et al. (2015). ACS Med. Chem. Lett. 6 , 128–133], is a ring‐contracted benzisothiazolinone (BIT) 1‐oxide, namely, 7‐nitro‐2‐(piperidine‐1‐carbonyl)‐5‐(trifluoromethyl)benzo[d]isothiazol‐3(2H)‐one 1‐oxide, C₁₄H₁₂F₃N₃O₅S, as revealed by X‐ray crystallography. Single‐crystal X‐ray analysis of the oxidation product originally assigned as BTZ043 sulfone provides clear evidence that the structure of the purported BTZ043 sulfone is likewise the corresponding BIT 1‐oxide, namely, 2‐[(S)‐2‐methyl‐1,4‐dioxa‐8‐azaspiro[4.5]decane‐8‐carbonyl]‐7‐nitro‐5‐(trifluoromethyl)benzo[d]isothiazol‐3(2H)‐one 1‐oxide, C₁₇H₁₆F₃N₃O₇S. A possible mechanism for the ring contraction affording the BIT 1‐oxides instead of the anticipated constitutionally isomeric BTZ sulfones and antimycobacterial activities thereof are discussed.