Development of a New Class of Inhibitors for the Malarial Aspartic Protease Plasmepsin II Based on a Central 7‐Azabicyclo[2.2.1]heptane Scaffold

Plasmepsin II (PMII), a malarial aspartic protease involved in the catabolism of hemoglobin in parasites of the genus Plasmodium, and renin, a human aspartic protease, share 35% sequence identity in their mature chains. Structures of 4‐arylpiperidine inhibitors complexed to human renin were reported by Roche recently. The major conformational changes, compared to a structure of renin, with a peptidomimetic inhibitor were identified and subsequently modeled in a structure of PMII (Fig. 1). This distorted structure of PMII served as active‐site model for a novel class of PMII inhibitors, according to a structure‐based de novo design approach (Fig. 2). These newly designed inhibitors feature a rigid 7‐azabicyclo[2.2.1]heptane scaffold, which, in its protonated form, is assumed to undergo ionic H‐bonding with the two catalytic Asp residues at the active site of PMII. Two substituents depart from the scaffold for occupancy of either the S1/S3 or S2′‐pocket and the hydrophobic flap pocket, newly created by the conformational changes in PMII. The inhibitors synthesized starting from N‐Boc‐protected 7‐azabicyclo[2.2.1]hept‐2‐ene ( 6 ; Schemes 1–5) displayed up to single‐digit micromolar activity (IC₅₀ values) toward PMII and good selectivity towards renin. The clear structure? activity relationship (SAR; Table) provides strong validation of the proposed conformational changes in PMII and the occupancy of the resulting hydrophobic flap pocket by our new inhibitors.     

Synthesis and structures of photoactive manganese–carbonyl complexes derived from 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole and 2‐(quinolin‐2‐yl)‐1,3‐benzothiazole

PhotoCORMs (photo‐active CO‐releasing molecules) have emerged as a class of CO donors where the CO release process can be triggered upon illumination with light of appropriate wavelength. We have recently reported an Mn‐based photoCORM, namely [MnBr(pbt)(CO)₃] [pbt is 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole], where the CO release event can be tracked within cellular milieu by virtue of the emergence of strong blue fluorescence. In pursuit of developing more such trackable photoCORMs, we report herein the syntheses and structural characterization of two Mn^I–carbonyl complexes, namely fac‐tricarbonylchlorido[2‐(pyridin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′]manganese(I), [MnCl(C₁₂H₈N₂S)(CO)₃], (1), and fac‐tricarbonylchlorido[2‐(quinolin‐2‐yl)‐1,3‐benzothiazole‐κ²N ,N ′]manganese(I), [MnCl(C₁₆H₁₀N₂S)(CO)₃], (2). In both complexes, the Mn^I center resides in a distorted octahedral coordination environment. Weak intermolecular C—H…Cl contacts in complex (1) and Cl…S contacts in complex (2) consolidate their extended structures. These complexes also exhibit CO release upon exposure to low‐power broadband visible light. The apparent CO release rates for the two complexes have been measured to compare their CO donating capacity. The fluorogenic 2‐(pyridin‐2‐yl)‐1,3‐benzothiazole and 2‐(quinolin‐2‐yl)‐1,3‐benzothiazole ligands provide a convenient way to track the CO release event through the `turn‐ON' fluorescence which results upon de‐ligation of the ligands from their respective metal centers following CO photorelease.     

Intramolecular Photocyclization of 2‐Acylphenyl Methacrylates: a Convenient Access to 4,5‐Dihydro‐1,4‐epoxy‐2‐benzoxepin‐3(1H)‐ones (= Benzo[c]‐6,8‐dioxabicyclo[3.2.1]octan‐7‐ones

The photochemical reactions of 2‐acylphenyl methacrylates (= 2‐acylphenyl 2‐methylprop‐2‐enoates) 1 were investigated. Irradiation of 2‐acylphenyl methacrylates 1a – d in MeCN gave the tricyclic lactones 2a – d in good yields, together with a small amount of O CO bond cleavage product, the 2‐acylphenols 3a – d (Scheme 2, Table). The formation of the tricyclic lactones 2 probably follows a mechanism involving a 1,7‐diradical through ζ‐H abstraction (1,8‐H transfer) by the excited carbonyl O‐atom (Scheme 3). Irradiation of 2‐acylphenyl tiglate (= 2‐acylphenyl (2E)‐2‐methylbut‐2‐enoate) 1e and 2‐acylphenyl methacrylates 1g – i , substituted by a MeO group (δ‐H) at the 3,5‐positions of the phenyl group, also gave the tricyclic lactones 2e and 2g – i , but in low yields. On the other hand, no H‐abstraction products were observed on irridation of 2‐(ethoxycarbonyl)phenyl methacrylate 1f , of 2‐acylphenyl methacrylate 1j which is substituted by a Me group (γ‐H) at the 3,5‐positions of the phenyl group, and of 1k with an OH group at the 3‐position of the phenyl group.     

Synthesis and Photochemical Evaluation of Iodinated Squarylium Cyanine Dyes

Several (multiply) iodinated squarylium cyanine dyes of type 1 and 8 (see Scheme and Table), derived from 1,3‐benzothiazole and 6‐iodo‐1,3‐benzothiazole, were synthesized as potential new photosensitizers, with absorptions in the 700‐nm region. Their ability to generate singlet oxygen (¹O₂) was assessed by luminescence‐decay measurement in the near‐IR. Some of these new dyes show interesting photophysical properties, and may be potentially used in photodynamic therapy (PDT).     

Exploring the structural landscape of 2‐(thiophen‐2‐yl)‐1,3‐benzothiazole: high‐Z′ packing polymorphism and cocrystallization with calix[4]tube

We report here for the first time a cocrystal of the so‐called neutral calix[4]tube, which is two tail‐to‐tail‐arranged and partially deprotonated tetrakis(carboxymethoxy)calix[4]arenes, including three sodium ions, with 2‐(thiophen‐2‐yl)‐1,3‐benzothiazole, namely trisodium bis(carboxymethoxy)bis(carboxylatomethoxy)calix[4]arene tris(carboxymethoxy)(carboxylatomethoxy)calix[4]arene–2‐(thiophen‐2‐yl)‐1,3‐benzothiazole–dimethyl sulfoxide–water (1/1/2/2), 3Na⁺·C₃₆H₃₀O₁₂^2?·C₃₆H₃₁O₁₂^?·C₁₁H₇NS₂·2C₂H₆OS·2H₂O, which provides a new approach into the host–guest chemistry of inclusion complexes. Three packing polymorphs of the same benzothiazole with high Z′ (one with Z′ = 8 and two with Z′ = 4) were also discovered in the course of our desired cocrystallization. The inspection of these polymorphs and a previously known polymorph with Z′ = 2 revealed that Z′ increases as the strength of intermolecular contacts decreases. Also, these results expand the frontier of invoking calixarenes as a host for nonsolvent small molecules, besides providing knowledge on the rare formation of high‐Z′ packing polymorphs of simple molecules, such as the target benzothiazole.     

Enantiomerically Pure Thrombin Inhibitors for Exploring the Molecular‐Recognition Features of the Oxyanion Hole

A new route via intermediate pseudoenantiomers was developed to synthesize racemic and enantiomerically pure new non‐peptidic inhibitors of thrombin, a key serine protease in the blood‐coagulation cascade. These ligands feature a conformationally rigid tricyclic core and are decorated with substituents to fill the major binding pockets (distal (D), proximal (P), selectivity (S1), and oxyanion hole) at the thrombin active site (Fig. 1). The key step in the preparation of the new inhibitors is the 1,3‐dipolar cycloaddition between an optically active azomethine ylide, prepared in situ from L ‐(4R)‐hydroxyproline and 4‐bromobenzaldehyde, and N‐piperonylmaleimide (Scheme 1). According to this protocol, tricyclic imide (compounds (±)‐ 15 ‐(±)‐ 18 and (+)‐ 21 ) and lactam (compound (+)‐ 2 ) inhibitors with OH or ether substituents at C(7) in the proline‐derived pyrrolidine ring were synthesized to specifically explore the binding features of the oxyanion hole (Schemes 2–4). Biological assays (Table) showed that the polar oxyanion hole in thrombin is not suitable for the accommodation of bulky substituents of low polarity, thereby confirming previous findings. In contrast, tricyclic lactam (+)‐ 2 (K_i=9 nM , K_i(trypsin)/K_i(thrombin)=1055) and tricyclic imide (+)‐ 21 (K_i=36 nM , K_i(trypsin)/K_i(thrombin)=50) with OH‐substituents at the (R)‐configured C(7)‐atom are among the most‐potent and most‐selective thrombin inhibitors in their respective classes, prepared today. While initial modeling predicted H‐bonding between the OH group at C(7) in (+)‐ 2 and (+)‐ 21 with the H₂O molecule bound in the oxyanion hole (Fig. 2), the X‐ray crystal structure of the complex of (+)‐ 21 (Fig. 7, b) revealed a different interaction for this group. The propionate side chain of Glu192 undergoes a conformational change, thereby re‐orienting towards the OH group at C(7) under formation of a very short ionic H‐bond (O? H???^?OOC; d(O???O)=2.4 Å). The energetic contribution of this H‐bond, however, is negligible, due to its location on the surface of the protein and the unfavorable conformation of the H‐bonded propionate side chain.     

Synthesis of [3,3′(4H,4′H)‐Bi‐2H‐1,3‐oxazine]‐4,4′‐diones and Their Hydrolysis

The [3,3′(4H,4′H)‐bi‐2H‐1,3‐oxazine]‐4,4′‐diones 3a – 3i were obtained by [2+4] cycloaddition reactions of furan‐2,3‐diones 1a – 1c with aromatic aldazines 2a – 2d (Scheme 1). So, new derivatives of bi‐2H‐1,3‐oxazines and their hydrolysis products, 3,5‐diaryl‐1H‐pyrazoles 4a – 4c (Scheme 3), which are potential biologically active compounds, were synthesized for the first time.     

Multicomponent Transformation of Isoindoline‐1,3‐diimine (=1H‐Isoindole‐1,3(2H)‐diimine), Acetylenic Esters,and Triphenylphosphine to Novel Dihydropyrimido[2,1‐a]isoindole Derivatives

The three‐component reaction of the zwitterions generated from dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates and triphenylphosphine (Ph₃P) with isoindoline‐1,3‐diimine (=1H‐isoindole‐1,3(2H)‐diimine) is described (Scheme 1). This reaction affords the corresponding special type of substituted dihydropyrimido[2,1‐a]isoindole derivatives in good yields without using any catalyst and activation (Table).     

A trinuclear palladium(II) complex containing N,S‐coordinating 2‐(benzylsulfanyl)anilinide and 1,3‐benzothiazole‐2‐thiolate ligands with a central square‐planar PdN4 motif

The reaction of dichlorido(cod)palladium(II) (cod = 1,5‐cyclooctadiene) with 2‐(benzylsulfanyl)aniline followed by heating in N,N‐dimethylformamide (DMF) produces the linear trinuclear Pd₃ complex bis(μ₂‐1,3‐benzothiazole‐2‐thiolato)bis[μ₂‐2‐(benzylsulfanyl)anilinido]dichloridotripalladium(II) N,N‐dimethylformamide disolvate, [Pd₃(C₇H₄NS₂)₂(C₁₃H₁₂NS)₂Cl₂]·2C₃H₇NO. The molecule has symmetry and a Pd...Pd separation of 3.2012 (4) Å. The outer Pd^II atoms have a square‐planar geometry formed by an N,S‐chelating 2‐(benzylsulfanyl)anilinide ligand, a chloride ligand and the thiolate S atom of a bridging 1,3‐benzothiazole‐2‐thiolate ligand, while the central Pd^II core shows an all N‐coordinated square‐planar geometry. The geometry is perfectly planar within the PdN₄ core and the N—Pd—N bond angles differ significantly [84.72 (15)° for the N atoms of ligands coordinated to the same outer Pd atom and 95.28 (15)° for the N atoms of ligands coordinated to different outer Pd atoms]. This trinuclear Pd₃ complex is the first example of one in which 1,3‐benzothiazole‐2‐thiolate ligands are only N‐coordinated to one Pd centre. The 1,3‐benzothiazole‐2‐thiolate ligands were formed in situ from 2‐(benzylsulfanyl)aniline.     

Highly Enantioselective Protonation of the 3,4‐Dihydro‐2‐ methylnaphthalen‐1(2H)‐one Li‐Enolate by TADDOLs

A series of nine TADDOLs (=α,α,α′,α′‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanols) 1a – 1i , have been tested as proton sources for the enantioselective protonation of the Li‐enolate of 2‐methyl‐1‐tetralone (=3,4‐dihydro‐2‐methylnaphthalen‐1(2H)‐one). The enolate was generated directly from the ketone (with LiN(i‐Pr)₂ (LDA)/MeLi) or from the enol acetate (with 2 MeLi) or from the silyl enol ether (with MeLi) in CH₂Cl₂ or Et₂O as the solvent (Scheme). The Li‐enolate (associated with LiBr/LDA, or LiBr alone) was combined with 1.5 – 3.0 equiv. of the TADDOL at −78° by addition of the latter or by inverse addition. 2‐Methyl‐1‐tetralone of (S)‐configuration is formed (≤80% yield) with up to 99.5% selectivity if and only if (R,R)‐TADDOLs ( 1d , e , g ) with naphthalen‐1‐yl groups on the diarylmethanol unit are employed (Table). The reactions were carried out on the 0.1‐ to 1.0‐mM scale. The selectivity is subject to non‐linear effects (NLE) when an enantiomerically enriched TADDOL 1d is used (Fig. 1). The performance of TADDOLs bearing naphthalen‐1‐yl groups is discussed in terms of their peculiar structures (Fig. 2).     

A Simple One‐Pot Synthesis of N‐Alkyl‐2,5‐diaryl‐1,3‐dioxol‐4‐amines

An efficient procedure for the synthesis of N‐alkyl‐2,5‐diaryl‐1,3‐dioxol‐4‐amines 3 via a one‐pot reaction of aromatic aldehydes 2 and alkyl isocyanides 1 at room temperature in good yields is described (Scheme 1, Table).     

Synthesis of Derivatives of the Optically Active β‐Amino Acids from (+)‐Car‐2‐ene

The reaction of (+)‐car‐2‐ene ( 4 ) with chlorosulfonyl isocyanate (=sulfuryl chloride isocyanate; ClSO₂NCO) led to the tricyclic lactams 6 and 8 corresponding to the initial formation both of the tertiary carbenium and α‐cyclopropylcarbenium ions (Scheme 2). A number of optically active derivatives of β‐amino acids which are promising compounds for further use in asymmetric synthesis were synthesized from the lactams (see 16, 17 , and 19 – 21 in Scheme 3).     

2,3‐Dihydro‐1,3‐benzothiazol‐2‐iminium monohydrogen sulfate and 2‐iminio‐2,3‐dihydro‐1,3‐benzothiazole‐6‐sulfonate: a combined structural and theoretical study

The 2‐aminobenzothiazole sulfonation intermediate 2,3‐dihydro‐1,3‐benzothiazol‐2‐iminium monohydrogen sulfate, C₇H₇N₂S⁺·HSO₄⁻, (I), and the final product 2‐iminio‐2,3‐dihydro‐1,3‐benzothiazole‐6‐sulfonate, C₇H₆N₂O₃S₂, (II), both have the endocyclic N atom protonated; compound (I) exists as an ion pair and (II) forms a zwitterion. Intermolecular N—H...O and O—H...O hydrogen bonds are seen in both structures, with bonding energy (calculated on the basis of density functional theory) ranging from 1.06 to 14.15 kcal mol⁻¹. Hydrogen bonding in (I) and (II) creates DDDD and C(8)C(9)C(9) first‐level graph sets, respectively. Face‐to‐face stacking interactions are observed in both (I) and (II), but they are extremely weak.     

Selenium‐Containing Heterocycles from Isoselenocyanates: Synthesis of 1,3‐Selenazinane and 1,3‐Selenazinanone Derivatives

The reaction of the intermediate ketene N,Se‐hemiacetal 3 , prepared from cyanomethylene derivatives 1 by treatment with Et₃N and aryl isoselenocyanates 2 , with bis‐electrophiles 6, 7, 9 , and 11 in DMF affords tetrahydro‐1H‐1,3‐selenazine (=1,3‐selenazinane) derivatives 8, 10 , and 12 in good yield (Scheme 2 and Tables 1–3). Chemical and spectroscopic evidence for the structures of the new compounds are described. The structures of 8d and 12e are established by X‐ray crystallography (Figs. 1 and 2).     

Experimental and Theoretical Conformational Analysis of 5‐Benzylimidazolidin‐4‐one Derivatives – a ‘Playground’ for Studying Dispersion Interactions and a ‘Windshield‐Wiper’ Effect in Organocatalysis

The PF₆ salts of 5‐benzyl‐1‐isopropylidene‐ and 5‐benzyl‐1‐cinnamylidene‐3‐methylimidazolidin‐4‐ones 1 (Scheme) with various substituents in the 2‐position have been prepared, and single crystals suitable for X‐ray structure determination have been obtained of 14 such compounds, i.e., 2 – 10 and 12 – 16 (Figs. 2–5). In nine of the structures, the Ph ring of the benzyl group resides above the heterocycle, in contact with the cis‐substituent at C(2) (staggered conformation A ; Figs. 1–3); in three structures, the Ph ring lies above the iminium π‐plane (staggered conformation B ; Figs. 1 and 4); in two structures, the benzylic C? C bond has an eclipsing conformation ( C ; Figs. 1 and 5) which places the Ph ring simultaneously at a maximum distance with its neighbors, the CO group, the N?C‐π‐system, and the cis‐substituent at C(2) of the heterocycle. It is suggested by a qualitative conformational analysis (Fig. 6) that the three staggered conformations of the benzylic C? C bond are all subject to unfavorable steric interactions, so that the eclipsing conformation may be a kind of ‘escape’. State‐of‐the‐art quantum‐chemical methods, with large AO basic sets (near the limit) for the single‐point calculations, were used to compute the structures of seven of the 14 iminium ions, i.e., 3, 4 / 12, 5 – 7, 13 , and 16 (Table) in the two staggered conformations, A and B , with the benzylic Ph group above the ring and above the iminium π‐system, respectively. In all cases, the more stable computed conformer (‘isolated‐molecule’ structure) corresponds to the one present in the crystal (overlay in Fig. 7). The energy differences are small (≤2 kcal/mol) which, together with the result of a potential‐curve calculation for the rotation around the benzylic C? C bond of one of the structures, 16 (Fig. 8), suggests that the benzyl group is more or less freely rotating at ambident temperatures. The importance of intramolecular London dispersion (benzene ring in ‘contact’ with the cis‐substituent in conformation A ) for DFT and other quantum‐chemical computations is demonstrated; the benzyl‐imidazolidinones 1 appear to be ideal systems for detecting dispersion contributions between a benzene ring and alkyl or aryl CH groups. Enylidene ions of the type studied herein are the reactive intermediates of enantioselective organocatalytic conjugate additions, Diels–Alder reactions, and many other transformations involving α,β‐unsaturated carbonyl compounds. Our experimental and theoretical results are discussed in view of the performance of 5‐benzyl‐imidazolidinones as enantioselective catalysts.     

Preparation of TADOOH,a Hydroperoxide from TADDOL,and Use in Highly Enantioface‐ and Enantiomer‐Differentiating Oxidations

Replacement of one OH group in TADDOL (=α,α,α′,α′‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol) by an OOH group gives a stable, crystalline chiral hydroperoxy alcohol TADOOH (={(4R,5R)‐5‐[(hydroperoxydiphenyl)methyl]‐2,2‐dimethyl‐1,3‐dioxolan‐4‐yl}diphenylmethanol) 3 , the crystal structure of which resembles those of numerous other TADDOL derivatives (Fig. 2). The new hydroperoxide was tested as chiral oxidant in three types of reactions: the epoxidation of enones with base catalysis (Scheme 2), the sulfoxidation of methyl phenyl sulfide (Scheme 3), and the Baeyer‐Villiger oxidation of bicyclic and tricyclic cyclobutanones, rac‐ 10a – d with kinetic resolution (Scheme 4, Fig. 3, and Table). Products of up to 99% enantiomer puritiy were isolated (the highest values yet observed for oxidations with a chiral hydroperoxide!). Mechanistic models are proposed for the stereochemical courses of the three types of reactions (Schemes 5 and 6, and Fig. 4). Results of AM1 calculations of the relative transition‐state energies for the anionic rearrangements of the exo Criegee adducts of TADOOH to the enantiomeric bicyclo[3.2.0]heptan‐6‐ones are in qualitative agreement with the observed relative rates (Table and Fig. 5).     

A chain of π‐stacked molecules in 4‐(2‐chlorophenyl)pyrrolo[1,2‐a]quinoxaline and a hydrogen‐bonded sheet in (4RS)‐4‐(1,3‐1,3‐benzodioxol‐6‐yl)‐4,5‐dihydropyrrolo[1,2‐a]quinoxaline

In the molecule of 4‐(2‐chlorophenyl)pyrrolo[1,2‐a]quinoxaline, C₁₇H₁₁ClN₂, (I), the bond lengths are consistent with electron delocalization in the two outer rings of the fused tricyclic system, with a localized double bond in the central ring. The molecules of (I) are linked into chains by a π–π stacking interaction. In (4RS)‐4‐(1,3‐benzodioxol‐6‐yl)‐4,5‐dihydropyrrolo[1,2‐a]quinoxaline, C₁₈H₁₄N₂O₂, (II), the central ring of the fused tricyclic system adopts a conformation intermediate between screw‐boat and half‐chair forms. A combination of N—H...O and C—H...π(arene) hydrogen bonds links the molecules of (II) into a sheet. Comparisons are made with related compounds.     

12‐ to 22‐Membered Bridged β‐Lactams as Potential Penicillin‐Binding Protein Inhibitors

As potential inhibitors of penicillin‐binding proteins (PBPs), we focused our research on the synthesis of non‐traditional 1,3‐bridged β‐lactams embedded into macrocycles. We synthesized 12‐ to 22‐membered bicyclic β‐lactams by the ring‐closing metathesis (RCM) of bis‐ω‐alkenyl‐3(S)‐aminoazetidinone precursors. The reactivity of 1,3‐bridged β‐lactams was estimated by the determination of the energy barrier of a concerted nucleophilic attack and lactam ring‐opening process by using ab initio calculations. The results predicted that 16‐membered cycles should be more reactive. Biochemical evaluations against R39 DD‐peptidase and two resistant PBPs, namely, PBP2a and PBP5, revealed the inhibition effect of compound 4d , which featured a 16‐membered bridge and the N‐tert‐butyloxycarbonyl chain at the C3 position of the β‐lactam ring. Surprisingly, the corresponding bicycle, 12d , with the PhOCH₂CO side chain at C3 was inactive. Reaction models of the R39 active site gave a new insight into the geometric requirements of the conformation of potential ligands and their steric hindrance; this could help in the design of new compounds.     

Furo[2,3‐d]pyrimidines and Oxazolo[5,4‐d]pyrimidines as Inhibitors of Receptor Tyrosine Kinases (RTK)

Receptor tyrosine kinases such as VEGFR2 (vascular endothelial growth factor receptor 2, KDR) or EGFR (epidermal growth factor receptor) play crucial roles in a variety of diseases, such as cancer. Recently, some pyrrolopyrimidines were shown to be potent EGFR inhibitors. Therefore, new types of oxazolo[5,4‐d]pyrimidines and furo[2,3‐d]pyrimidines were synthesized (Schemes 1 and 2). Appropriately substituted derivatives of these classes of compounds inhibited VEGFR2 and EGFR with IC₅₀ values in the low nanomolar range (see Table). Generally, the furopyrimidines were somewhat more active than the oxazolopyrimidines. The best inhibitors, 20m, 20p , and 20r , had an IC₅₀ of 3 nM towards EGFR and showed a good selectivity, being distinctly less active towards VEGFR2.     

Convenient Synthesis of 1H‐Indol‐1‐yl Boronates via Palladium(0)‐Catalyzed Borylation of Bromo‐1H‐indoles with ‘Pinacolborane’

An atom‐economic Pd⁰‐catalyzed synthesis of a series of pinacol‐type indolylboronates 3 from the corresponding bromoindole substrates 2 and pinacolborane (pinBH) as borylating agent was elaborated. The optimal catalyst system consisted of a 1 : 2 mixture of [Pd(OAc)₂] and the ortho‐substituted biphenylphosphine ligand L‐3 (Scheme 4, Table). Our synthetic protocol was applied to the fast, preparative‐scale synthesis of 1‐substituted indolylboronates 3a – h in the presence of different functional groups, and at a catalyst load of only 1 mol‐% of Pd.