Redox substoichiometry in isotope dilution analysis

The oxidation reaction of antimony(III) with potassium dichromate has been investigated radiometrically. The quantitative oxidation of antimony(III) was found to be not disturbed even in large amounts of tin(IV). On the basis of these results the redox substoichiometric isotope dilution analysis using potassium dichromate as the oxidizing agent was proposed for the determination of antimony in metallic tin. The antimony content of 1.22±0.05 μg in metallic tin (10 mg) was determined without separation of the matrix element.     

Redox substoichiometry in isotope dilution analysis

Radiometric titration of antimony(III) with potassium bromate in hydrochloric acid media using the standard series method provided much valuable informations on the titration errors which depended on the concentrations of the acid and antimony(III). The hydrochloric acid concentrations between 2.5 and 3.0M were found to be optimum for the oxidation of antimony(III) amounts of 4 μg or less. Under these optimum reaction conditions the redox substoichiometric isotope dilution analysis was applied to the determination of antimony in metallic zinc and the satisfactory results were obtained, without the separation of matrix element. Also, the merits of various oxidizing agents hitherto studied for the quantitative oxidation of antimony(III) were compared and discussed.     

Coprecipitation as a means of separation in substoichiometric isotope dilution analysis

Chromium has been determined by isotope dilution in artificial standards and in standard alloys using the substoichiometric principle. As a substoichiometric reaction the reduction of Cr(VI) to Cr(III) was used, followed by separation of these species by coprecipitation of the trivalent chromium on a Ti(OH)₄ precipitate. For amounts smaller than 1 μg the standard method had to be modified owing to spontaneous reduction of hexavalent chromium in the solution. Interferences from other metals, if they occur, can be easily overcome. The method is simple and inexpensive.     

Comparison of the sub- and super-equivalence and substoichiometric methods of isotope dilution analysis for the determination of a trace amount of antimony

The sub- and super-equivalence methods of isotope dilution analysis (SSE-IDA) have been compared with substoichiometric isotope dilution analysis (Subst-IDA) for the determination of a trace amount of antimony by means of a redox reaction. For this comparison, the difference between the amount separated and the theoretical value was determined under various conditions. Under conditions in which the substoichiometric reaction and separation gave unsatisfactory results, accurate determination could still be performed by SSE-IDA. The reason for this is discussed.     

Substoichiometric radioactivation analysis for ytterbium

The substoichiometric separation of Yb(III) can be achieved by the extraction of a substoichiometric amount of thenoyltrifluoroacetone and an excess amount of phenanthroline in benzene. The appropriate pH range for the substoichiometric extraction is 6–8. The reproducibility of the substoichiometric extraction of Yb(III) is very good as RSD 1%. As an example, Yb in a manganese nodule is determined by the substoichiometry combined with the radioactivation analysis. The content of Yb is 17.63±0.23 g/g. The present procedure can be applied to the determination of other rare earth elements.     

Redox substoichiometric determination of arsenic in biological materials by neutron activation analysis

A redox substoichiometry is proposed for an accurate and precise determination of arsenic. This method is based on the substoichiometric oxidation of trivalent arsenic to pentavalent with potassium bromate or ceric sulfate followed by the separation of these species by thionalide extraction of trivalent arsenic. It was applied to neutron activation analysis of arsenic in the NBS SRM Orchard Leaves and the Shark Powder. The results were obtained with an excellent accuracy and precision.     

Substoichiometric extraction of tantalum with diantipyrylmethane

Diantipyrylmethane is used for substoichiometric extraction of tantalum from 1—4M hydrofluoric acid into 1,2-dichlorethane. The selectivity of the method is good, niobium and antimony(V) being the main inteferences. The stoichiometric composition of the tantalum/diantipyrylmethane complex is 1:1. The method was usef for the determination of trace amounts of tantalum (0.52 ± 0.05 μ g^?1) in a lake sediment (Bodensee/Lake Constance) by neutron activation/μ-spectrometry. Tantalum was determined in niobium samples by an isotope dilution procedure after separation of the matrix on a polyurethane foam column loaded with diantipyrylmethane.     

Substoichiometric radiochemical determination of antimony with potassium ethyl xanthate

A rapid and sensitive substoichiometric radiochemical method has been developed for the determination of microgram amounts of antimony employing potassium ethylxanthate as a reagent and chloroform as an extractant from sulfuric acid medium. The effect of associated ions on the extraction was studied. The method developed was successfully applied to determine the antimony content in standard solutions and synthetic mixture with an average error ±2.07%     

Simulataneous substoichiometric determination of europium and terbium with diethylenetriaminepentaacetic acid and 2-thenoyltrifluoroacetone

The simultaneous substoichiometric separation of europium and terbium is presented and its application to the determination of these elements with DTPA and HTTA is developed. Experimental results for the simultaneous substoichiometric separation are in good agreement with the theoretical results introduced by the principle. Europium and terbium in orchard leaves are determined by simultaneous substoichiometric neutron activation. The analytical values are 23±1.1 ppb for europium, and 17±1.2 ppb for terbium.     

The application of substoichiometric radioisotopic dilution principles to controlled-potential coulometry and solvent extraction

Radioisotope dilution principles are applied to controlled-potential electrolysis and solvent extraction with dithizone for the determination of trace amounts of cadmium. A method was developed to verify whether or not the substoichiometric principle was obeyed. If the substoichiometric principle was not obeyed, analysis was still possible by means of calibration curves. In order to obtain independent verification of the series controlled-potential method and to establish a means of comparison with the radioisotope dilution technique a current integration procedure was also employed. A microtechnique was used to extend the sensitivity of the solvent extraction system for cadmium. Standard zinc spelter and high-purity zinc were analyzed for cadmium after separation by a method of standard addition.     

Ion-exchange selectivity and chromatographic separation of trivalent metals on titanium antimonate

Summary The ion exchange selectivity of trivalent metal ions has been determined on titanium antimonate cation exchanger prepared by coprecipitation of antimony to titanium at different mole ratios. The selectivity sequence Al³⁺<Cr³⁺<Ga³⁺<In³⁺<Fe³⁺ was found for trivalent metal ions at an initial concentration of 10^–4 mol dm^–3 in nitric acid media. A high separation factor ^Ga/Al = Kd^Ga/Kd^Al, 4.8×10³, was observed for the Ga³⁺–Al³⁺ pair on titanium antimonate with an antimony to titanium ratio of 0.34. The effective separation of Ga³⁺ and In³⁺ from Al³⁺ was achieved using a 3 cm×0.5 cm i.d. column containing titanium antimonate with an antimony to titanium ratio of 0.34.     

Destructive and non-destructive methods for the determination of micro-trace amounts of antimony in high purity silicon by neutron activation analysis

Destructive and non-destructive methods have been used for the determination of microtraces of antimony in high-purity silicon powder. The destructive method was based on substoichiometric radioactivation analysis with solvent extraction using BPHA and cupferron as organic reagents. The antimony contents in high-purity silicon can be determined by the proposed method.     

Displacement substoichiometric separations in radioanalytical chemistry

The principle of displacement substoichiometry and the possibilities of its practical use have been outlined. The substoichiometric separation of lead, arsenic, and zinc can be carried out by applying diethyldithiocarbamate complexes and solvent extraction.     

Separation of gallium, indium and thallium by extraction with n-octylaniline in chloroform

Extraction of gallium(III), indium(III) and thallium(III) with n-octylaniline in chloroform at various concentrations of hydrogen halide acids (HCl, HBr, HI) has been studied and a scheme for their separation proposed. The procedure can be successfully applied to the separation and determination of gallium in presence of mercury, bismuth, manganese, zinc and lead; indium in presence of bismuth, antimony, lead, mercury, cadmium and zinc; and thallium in presence of mercury, cadmium, manganese, aluminium, tin and antimony. The advantage of the method is that the reagent can be recovered for reuse. The method is simple, rapid, and effects clear-cut separation.     

Dosage De L′antimoine Dans Le Zinc Electrolytique Et Le Sulfate De Zinc

Abstract

Anmodic-stripping voltammetry at a haning-drop mercury electrode has been applied to the precise and accurate trace analysis of antominy in metalic zinc and in solutions of zinc sulfate. A sample preparation methos is described which obviates loss of antimony by voltalization. A mixture of zinc sulfate and 6M hydrochloricacid is used as supporting electrolyte, in order to enhance the separation o the closely spaced dissolution peaks of copper and antimony.     

Sub-Microdetermination of Antimony (Iii) and Antimony (V) In Natural and Polluted Waters and Total Antimony In Biological Materials By Flameless Aas Following Extractive Separation With N-P-Methoxyphenyl-2-Furylacrylohydroxamic Acid

Abstract

Antimony (III) was separated from antimony (V) by extractive separation from 2–10^?6 M HC1 media with N-p-methoxyphenyl-2-furylacrylohydroxamic acid (MFHA) in chloroform and determined by graphite furnace atomic absorption spectroscopy at 2600°C using copper as matrix modifier. Antimony (V) was subsequently reduced to the trivalent form with acidic (-1M HC1) potassium iodide solution and determined as above. the mutual tolerance between antimony (III) and antimony (V) in the present mothod was very high-either of the species could be determined in presence of 15 times higher concentration of the other species. the sepatation-AAS determination system enabled accurate differential analysis of the metalloid in natural/ polluted waters down to 10^?2 ppb (ug 1^?1) levels. the method was also applied to the analysis of antimony in vehicle exhaust particulates, plant tissues, and animal tissues. the method was validated by analysing several certified reference materials with and without standard addition of antimony. MFHA was chosen from amongst thirteen new hydroxamic acids.     

Simultaneous determination of copper,mercury and antimony in biological samples by neutron activation and substoichiometric extraction

A simple and accurate method has been developed for the determination of copper, mercury and antimony by thermal neutron activation analysis involving substoichiometric extraction technique. The results of analysis indicate that copper, mercury and antimony in biological samples can be determined with an accuracy of 5.3%, 5.5% and 6.2%, respectively. Two samples and a standard can be analysed by the proposed method in about 4 hrs. Part of this work was presented at the International Conference on Modern Trends in Activation Analysis, Saclay, Paris, France, October 2–6, 1972.     

A new principle of activation-analysis separations-X Substoichiometric determination of traces of gallium

A rapid method for the substoichiometric determination of gallium by neutron-activation analysis has been developed. After irradiation and dissolution of the test sample, gallium carrier is added and two preliminary separation steps are performed: the extraction into chloroform of cupferrates from 7N sulphuric acid and of diethyldithiocarbamates from 2-3N sulphuric acid. The pH of the remaining aqueous phase is then adjusted to 5.5, the solution extracted with a substoichiometric amount of 8-hydroxyquinoline in chloroform and the activity of the gallium hydroxyquinolate extract measured. A simultaneously irradiated gallium standard is treated in exactly the same way. From the activities of these two substoichiometric extracts the amount of gallium originally present in the test sample can be calculated. The method has been applied to the determination of 10(-6) to 10(-3)% of gallium in metallic aluminium and transistor-grade silicon.     

Subtoichiometric determination of indium and tin by radioactivation analysis

A method of radioactivation analysis has been developed for the determination of indium and tin. It is based on substoichiometric extraction of indium diethyldithiocarbamate into carbon tetrachloride from a slightly ammoniacal solution in the presence of potassium cyanide. With this method, indium can be determined via^116m In (T=54 min) and tin via^113m In (T=104 min) which is formed by the reaction¹¹²Sn(n, ψ)¹¹³Sn. The method has been applied to the determination of indium in metallic zinc and of tin in tin-doped gallium arsenide, and 0.4 ppb of indium was analyzed in a zinc sample.     

Substoichiometric determination of trace impurities in zinc selenide

Determination of trace impurities in zinc selenide was carried out by substoichiometric neutron activation analysis. Trace impurities were separated from matrix elements by suitable procedures and determined by substoichiometric methods, i.e., Au was extracted with rhodamine-B, Ag and Cu with dithizone, Cr with sodium diethyldithiocarbamate, Co with 1-nitroso-2-naphthol, and Sb with cupferron. Two sorts of zinc selenide single crystals were supplied for analysis and the following values were obtained as impurity concentration; Au 0.36, 0.076 ppb, Ag 42, 32 ppb, Cr. 1.8, 0.63 ppm, Co 0.16, 0.0079 ppm, Sb 8.5, 5.9 ppb and Cu 1.4, 0.44 ppm. The behavior of copper by heat-treatment of zinc selenide was also studied by means of substoichiometric isotope dilution analysis.