GaAs(0 0 1) (2 × 4) to c(4 × 4) transformation observed in situ by STM during As flux irradiation

Atomic resolution scanning tunnelling microscopy (STM) has been used to study in situ the As-terminated reconstructions formed on GaAs(0 0 1) surfaces in the presence of an As₄ flux. The relationship between the As-rich (2 × 4) and c(4 × 4) surfaces is observed throughout the gradual evolution of the reconstruction transformation. The results suggest that during the initial stage of the transformation, Ga-rich As-terminated variations of the c(4 × 4) form in order to accommodate excess mobile Ga produced by pit formation. These transient structures later planarize, as excess Ga is incorporated at step/island edges. Successive imaging of the same sample area during As₄ irradiation allows point-by-point adatom binding to be analysed in a way inaccessible to MBE–STM systems relying on sample quenching and transfer.     

Formation of a √3 × √3 surface on Si/Ge(1 1 1) studied by STM and LEED

We have performed a detailed study of the formation and the atomic structure of a √3 × √3 surface on Si/Ge(1 1 1) using both scanning tunneling microscopy (STM) and low energy electron diffraction (LEED). Both experimental methods confirm the presence of a √3 × √3 periodicity but unlike the Sn/Ge(1 1 1) and the Sn/Si(1 1 1) surfaces, the Si/Ge(1 1 1) surface is not well ordered. There is no long range order on the surface and the √3 × √3 reconstruction is made up of double rows of silicon atoms separated by disordered areas composed of germanium atoms.     

Adsorption of an organic zwitterion on a Si(1 1 1)-7 × 7 surface at room temperature

The couple sulfonato/Si(1 1 1)-7 × 7 leads to remarkable 2D chiral molecular assembly with a stability improved at room temperature. The voltage-dependency of the STM images has been experimentally investigated and the correlation between STM images and PDOS has been studied. The proposed empirical model of the adsorption of molecules on Si(1 1 1)-7 × 7 has been justified by the experimental and theoretical data.     

Structural properties of Cu clusters on Si(1 1 1):Cu2Si magic family

Basing on the results of the scanning tunneling microscopy (STM) observations and density functional theory (DFT) calculations, the structural model for the Cu magic clusters formed on Si(1 1 1)7 × 7 surface has been proposed. Using STM, composition of the Cu magic clusters has been evaluated from the quantitative analysis of the Cu and Si mass transport occurring during magic cluster converting into the Si(1 1 1)‘5.5 × 5.5’-Cu reconstruction upon annealing. Evaluation yields that Cu magic cluster accommodates 20 Cu atoms with 20 Si atoms being expelled from the corresponding 7 × 7 half unit cell (HUC). In order to fit these values, it has been suggested that the Cu magic clusters resemble fragments of the Cu₂Si-silicide monolayer incorporated into the rest-atom layer of the Si(1 1 1)7 × 7 HUCs. Using DFT calculations, stability of the nineteen models has been tested of which five models appeared to have formation energies lower than that of the original Si(1 1 1)7 × 7 surface. The three of five models having the lowest formation energies have been concluded to be the most plausible ones. They resemble well the evaluated composition and their counterparts are found in the experimental STM images.     

Core-level shifts of InP(1 0 0)(2 × 4) surface: Theory and experiment

Surface core-level shifts (SCLSs) of the (2 × 4)-reconstructed InP(1 0 0) surface with the established mixed In–P dimer structure have been investigated by first-principles calculations and photoelectron spectroscopy. Theoretical values were calculated using both the local density approximation (LDA) and the generalized gradient approximation (GGA) for the exchange-correlation energy functional. The obtained theoretical values are quite similar within both approximations. The found differences originate in the tiny structural differences. It is concluded that the expansion or contraction of the crystal lattice has smaller effect on the SCLSs than the geometrical details of the reconstruction, which suggests that the Madelung potential has the dominant effect on the SCLSs. The results support the presence of a P 2p peak at higher binding energy (BE) compared to bulk peak, as proposed with recent measurements [P. Laukkanen, J. Pakarinen, M. Ahola-Tuomi, M. Kuzmin, R. E. Perälä, I. J. Väyrynen, A. Tukiainen, V. Rimpiläinen, M. Pessa, M. Adell, J. Sadowski, Surf. Sci. 600 (2006) 3022], and reveal several hitherto not reported SCLSs. The calculated SCLSs reproduce the measured spectra within reasonable accuracy. Furthermore, the atomic origins of the InP(1 0 0)(2 × 4) SCLSs are solved. In particular, it is shown that the lowest SCLS of P 2p of the InP(1 0 0)(2 × 4) arises from the topmost In–P dimers.     

Photoreflectance study of InAs quantum dots on GaAs(n 1 1) substrates

InAs self-assembling quantum dots (SAQDs) were grown on GaAs(n 1 1) substrates (n=2,3,4,5) by molecular beam epitaxy. Their structural and optical properties were studied by reflection high-energy electron diffraction, atomic force microscopy (AFM) and photoreflectance spectroscopy (PR). The PR spectra from 0.7 to 1.3 eV presented transitions associated to the SAQDs. The energy transitions were obtained by fitting the PR spectra employing the third derivative line-shape model. For n=2,4,5, two functions were required to fit the spectra. For n=3 only one function was required, in agreement with the more uniform SAQDs size distribution observed by AFM on GaAs(3 1 1)A. Franz–Keldysh oscillations (FKO) were observed in the PR spectra at energies higher than the GaAs band gap. From the FKO analysis we obtained the GaAs built-in internal electric field strength (F_int) at the InAs/GaAs(n 1 1) heterointerface. From F_int we made an estimation of the GaAs strain at the heterointerface.     

Observation of charge transfer states of F4-TCNQ on the 2-methylpropene chemisorbed Si(1 0 0)(2 × 1) surface

We have investigated the valence electronic states of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄-TCNQ) on the 2-methylpropene chemisorbed Si(1 0 0)(2 × 1) surface using valence photoelectron spectroscopy. Since the electron affinity of condensed F₄-TCNQ is 5.24 eV and the energy from the valence band maximum of the 2-methylpropene saturated Si(1 0 0)(2 × 1) surface to the vacuum level is 4.1 eV, spontaneous charge transfer would be expected in the present system. At sub-monolayer coverage of F₄-TCNQ, characteristic peaks are observed at 1.1 and 2.5 eV below Fermi energy. The former peak is assigned to a singly occupied affinity level, and the latter is ascribed to a relaxed highest occupied molecular orbital of adsorbed F₄-TCNQ. The work function change is increased up to +1.3 eV as a function of F₄-TCNQ coverage. These results support the occurrence of charge transfer into F₄-TCNQ on the 2-methylpropene saturated Si(1 0 0)(2 × 1) surface.     

Excess molar volumes of ternary mixtures {n-butylacetae + 1-butanol + 1, 2-butanediol} and {n-butylacetate + 1-butanol + 1, 3-butanediol} at T = 303.15 K

Excess molar volumes of the ternary systems formed by {n-butylacetate + 1-butanol + 1,2-butanediol } and {n-butylacetate + 1-butanol + 1,3-butanediol} were measured at 303.15 K for the whole composition range. The excess molar volumes, V_m^E, for binary mixtures of {n-butylacetate + 1-butanol, + 1,2-butanediol and + 1,3-butanediol} are positive and for the binary mixtures of {1-butanol + 1,2-butanediol and + 1,3-butanediol} are negative. Several empirical expressions are used to predict and correlate the ternary excess molar volumes from experimental results on the constituted binaries and analyzed to gain insight about liquid mixture interactions.     

Ultra thin V2O3 films grown on oxidized Si(1 1 1)

The growth of V₂O₃(0 0 0 1) has been investigated by scanning tunnelling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). Direct evaporation of vanadium onto the Si(1 1 1)-7 × 7 substrate gives rise to massive surface intermixing and consequent silicide formation. In order to obtain the vanadium oxide with good quality, the 7 × 7 surface was initially partially oxidized which leads to a smooth oxygen–silicon surface layer which in turn prevents a complete vanadium–silicon alloy formation. Finally a vanadium oxide film of V₂O₃ stoichiometry was created. The grown film exposes single crystalline areas of stepped surfaces which appear azimuthally randomly-oriented.     

Point defects along metallic atomic wires on vicinal Si surfaces: Si(5 5 7)–Au and Si(5 5 3)–Au

Point defects on the metallic atomic wires induced by Au adsorbates on vicinal Si surfaces were investigated using scanning tunneling microscopy and spectroscopy (STM and STS). High-resolution STM images revealed that there exist several different types of defects on the Si(5 5 7)–Au surface, which are categorized by their apparent bias-dependent images and compared to the previous report on Si(5 5 3)–Au [Phys. Rev. B (2007) 205325]. The chemical characteristics of these defects were investigated by monitoring them upon the variation of the Au coverage and the adsorption of water molecules. The chemical origins and the tentative atomic structures of the defects are suggested as Si adatoms (and dimers) in different registries, the Au deficiency on terraces, and water molecules adsorbed dissociatively on step edges, respectively. STS measurements disclosed the electronic property of the majority kinds of defects on both Si(5 5 7)–Au and Si(5 5 3)–Au surfaces. In particular, the dominating water-induced defects on both surfaces induce a substantial band gap of about 0.5 eV in clear contrast to Si adatom-type defects. The conduction channels along the metallic step-edge chains thus must be very susceptible to the contamination through the electronic termination by the water adsorption.     

Atomic and electronic properties of furan on the Si(0 0 1)-(2 × 2) surface

The atomic and electronic properties of the adsorption of furan (C₄H₄O) molecule on the Si(1 0 0)-(2 × 2) surface have been studied using ab initio calculations based on pseudopotential and density functional theory. We have considered two possible chemisorption mechanisms: (i) [4 + 2] and (ii) [2 + 2] cycloaddition reactions. We have found that the [4 + 2] interaction mechanism was energetically more favorable than the [2 + 2] mechanism, by about 0.2 eV/molecule. The average angle between the CC double bond and Si(1 0 0) surface normal was found to be 22°, which is somewhat smaller than the experimental value of 28°, but somewhat bigger than other theoretical value of 19°. The electronic band structure, chemical bonds, and theoretical scanning tunneling microscopy images have also been calculated. We have determined a total of six surface states (one unoccupied and five occupied) in the fundamental band gap. Our results are seen to be in good agreement with the recent near edge X-ray absorption fine structure and high resolution photoemission spectroscopy data.     

Atomic and electronic structure of group-IV adsorbates on the GaAs(0 0 1)-(1 × 2) surface

Ab initio calculations, based on pseudopotentials and density functional theory, have been performed to investigate the atomic and electronic structure of the group-IV adsorbates (C, Si, Ge, Sn, and Pb) on the GaAs(0 0 1)-(1 × 2) surface considered in two different models: (i) non-segregated Ga-IV-capped structure and (ii) segregated structure in which the group-IV atoms occupying the second layer while the As atom floats to the surface. The non-segregated structure is energetically more favorable than the segregated structure for Sn and Pb, whereas it is the other way around for C, Si, and Ge.     

Density-functional study of the CO chemisorption on bimetallic Pd–Sn(1 1 0) surfaces

We study the ordered PdSn c(2 × 2), (2 × 1), and PdSn₂ (3 × 1) overlayers deposited on Pd(1 1 0) by using first-principles density-functional calculations. It appears that the two PdSn structures are almost degenerate in the energy. Pd–Sn surfaces we consider do not display the marked buckling with Sn atoms displaced towards vacuum that is common for Pt–Sn surfaces. Low-coverage CO chemisorption at these overlayers and on analogous surface structures on Pd₃Sn is considered. It is shown that inclusion of an empirical correction to the CO adsorption energy changes the stable adsorption site from the long-bridge to the top one in most cases. The adsorption energy decreases with the number of Sn atoms in the vicinity of the adsorption site, and this property correlates well with the position of the centre of gravity of the local Pd d-electron band, and also with the variation of the local density of d-electron states at the Fermi level. The centre-of-gravity value is used to assess the core-level shifts for Pd atoms in various geometries. Most of the calculated data compare rather well with the recent measurements on Pd–Sn overlayers at Pd(1 1 0) as well as with other data on related bimetallic systems.     

Transformations of C-type defects on Si(100)-2 × 1 surface at room temperature – STM/STS study

We present a scanning tunneling microscopy study of the C-type defects on the Si(100)-2 × 1 surface and their transformations into other defect forms at room temperature. A model of the C defect as a dissociated water molecule was adopted for interpretation of the observed transformations. We explained the transformations by hopping the H or OH between bonding sites on Si dimers. Newly, the most stable defect form, corresponding to the H and hydroxyl group adsorbed on the same dimer, is reported. Real time observations provided an explanation for the defect C2-C2 described earlier. A reversible transition of this defect into another form, not revealed yet, is presented. Electronic structure of the observed defects is studied by means of scanning tunneling spectroscopy. Measured spectra show semiconducting character of the C defect. Spectra of the other defect forms are discussed.     

Magnetic shape anisotropy calculations of Fe nanostructures at the Si/Fe(1 1 1) interface

The influence of Si capping layers on the magnetic properties of thin Fe films grown on Si(1 1 1) has been studied by means of shape anisotropy calculations. Fe surface morphology simulations are realized using experimental STM data. Surface modifications induced by the interaction between the Si overlayer and the Fe surface are performed in agreement with the model proposed in a previous work by Stephan et al. [J. Magn. Mater. 293 (2005) 746]. Calculations of the uniaxial anisotropy energy constant K_u are then performed on the modified Fe surface morphology for different Si deposition geometries as proposed in the model. The relevant data deduced by this method such as anisotropy constants and their related easy axis direction, are directly compared to the experimental ones obtained by ex situ magneto-optical Kerr effect (MOKE) measurements at room temperature using the transverse bias initial inverse susceptibility and torque (TBIIST) method. We show that a very good agreement between those results leads to a confirmation of the proposed model.     

Surface structures of in (√3 × √3 )R30° and (5√3 × 2) phases studied by surface extended X-ray absorption fine structure spectroscopy

The local surface structures of in the ( √3 × √3) R30° and (5√3 × 2) phases have been investigated by means of polarization-dependent sulfur K-edge surface EXAFS. In the (√3 × √3 ) R30° phase, sulfur adatoms are found to occupy threefold hollow sites with a S---Ni distance of 2.13 Å and an inclination angle ω of the Sz.sbnd;Ni bonds at 44° from the surface plane. In contrast, in the (5√3 × 2) phase, it is determined that the Sz.sbnd;Ni bond is longer, 2.18 Å, more inclined, ω = 31°, and that the coordination number is not 3 but 4. These results strongly support a picture involving reconstruction of the top nickel layer to form a rectangular structure. Consideration of several models proposed for the (5√3 × 2) phase leads to one which is compatible with both the present results and results recently reported using STM.     

Tetra-σ bonding adsorption of pyridine on Si(1 0 0)-2 × 1

We studied adsorption of pyridine on Si(1 0 0) at room temperature using high resolution photoemission spectroscopy (PES) and near edge X-ray adsorption fine structure (NEXAFS) in the partial electron yield (PEY) mode. The Si 2p, C 1s, N 1s spectra of pyridine on Si(1 0 0) showed that pyridine is chemisorbed on Si(1 0 0)-2 × 1 through the formation of the tetra-σ-bonded structure with the N atom and three C atoms. NEXAFS was conducted to characterize the adsorption geometry of pyridine on Si(1 0 0). The π* orbital of CC bond showed a good angle dependence in C K-edge NEXAFS spectra, and we were able to estimate the adsorption angle between chemisorbed pyridine of CC bond and the Si(1 0 0) surface using an analytical solution of NEXAFS intensity. We find the coexistence of two different tight bridges with the adsorption angles 42 ± 2° and 45 ± 2° with almost equal abundance.     

The parameter in an Sp(2N)×U(1) model

We present a model based upon the gauge group Sp(2N)×U(1) which contains the SU(2)×U(1) electroweak model as an exact subsector. The parameter in this symplectic model is calculated to leading order in 1/N. We illustrate the general dependence of upon the Higgs coupling constant λ with particular interest in th e large λ limit. Finally, the 1/N result is compared with conventional one-and two-loop expressions for in the standard model.     

Electronic structure investigation of the Ag(1 1 0)(n×1)O surfaces––new photoemission results for an old problem

We have used angle-resolved photoelectron spectroscopy to investigate the occupied antibonding electron states of the Ag(1 1 0)(n×1)O surface along different directions in the surface Brillouin zone. We present experimental evidence that several earlier results obtained along (along the Ag–O chains) contain admixtures from contamination, most probably from carbonate-like contributions. New results are obtained along and (perpendicular to the chains). These data indicate that the n=2 structure is stabilized by repulsive electronic interaction between neighbouring chains, which diminishes drastically for n=3 and disappears almost completely at n4. This observation points to a strain field within the substrate which stabilizes the geometry between n=3 (interchain distance 8.7 Å) and n=8 (23.1 Å). Its existence is indirectly seen in the n-dependence of the surface phonon energies at , which can be explained quantitatively by umklapp-processes induced by the lateral periodicity of the strain field. We compare our photoemission results for (2 × 1)O with available surface band structure calculations.     

Characterization of InN epilayers grown on Si(1 1 1) substrates at various temperatures by MBE

InN films have been grown by plasma-assisted molecular beam epitaxy (PAMBE) and characterized by various technologies. It was found that the structural, optical and electrical properties can be drastically improved by raising growth temperature from 440 to 525 °C. Grainy morphology was found in the grain size was found in atomic force microscope images. The large grain size was about 360 nm for a film grown at 525 °C. These films exhibited Wurtzite structure with a c/a ratio ranging from 1.59 to 1.609. The dislocation densities estimated by X-ray diffraction techniques closely agreed with those analyzed by plan-view transmission electron microscopy. Photoluminescence (PL) studies confirmed near band-to-band transitions and the narrowest low-temperature PL peak width was found to be 24 meV at 0.666 eV. Carrier concentrations decreased from 1.44×10¹⁹ to 1.66×10¹⁸ cm⁻³ and Hall mobility increased from 226 to 946 cm² V⁻¹ s⁻¹ as the growth temperature is progressively increased from 440 to 525 °C. Raman spectra also indicated improved crystal quality as the growth temperature was raised.