New insight on nanostructure assembling of high-performance electrode materials: synthesis of surface-modified hexagonal β-Ni(OH)<Subscript>2</Subscript> nanosheets as an example

Hexagonal β-Ni(OH)₂ nanosheets with thickness of ～12 nm were synthesized by a hydrothermal method at 150 °C using nickel chloride as nickel source and morpholine as alkaline. Electrodes for application in pseudocapacitor were assembled through a traditional technique: pressing a mixture of β-Ni(OH)₂ nanosheets and acetylene black onto nickel foam. Due to the hexagonal shape of rigid β-Ni(OH)₂ nanosheet and the mediation of surface-modified glycerol during electrochemical charge–discharge cycles, a nanostructure of electrode material with facile interior pathway for the transfer of electrolyte was formed. As a result, the as-formed electrodes presented high specific capacitance of 1,917 F g^?1 at current density of 1.6 A g^?1 in 3 mol L^?1 KOH solution. At high charge and discharge current density of 31.3 A g^?1, the electrodes still remained a high specific capacitance of 1,289 F g^?1. The interesting results obtained from this investigation may provide a new insight for the synthesis of electrode materials with high electrochemical performance.     

Silicon/carbon nanocomposites used as anode materials for lithium-ion batteries

Silicon/carbon nanocomposites are prepared by dispersing nano-sized silicon in mesophase pitch and a subsequent pyrolysis process. In the nanocomposites, silicon nanoparticles are homogeneously distributed in the carbon networks derived from the mesophase pitch. The silicon/carbon nanocomposite delivers a high reversible capacity of 841 mAh g^?1 at the current density of 100 mA g^?1 at the first cycle, high capacity retention of 98 % over 30 cycles, and good rate performance. The superior electrochemical performance of nanocomposite is attributed to the carbon networks with turbostratic structure, which enhance the conductivity and alleviate the volume change of silicon.     

The intercalation/deintercalation kinetic studies on the structure-integrated cathode material 0.5Li2MnO3 0.5LiNi0.5Mn0.5O2

A cathode material, 0.5Li₂MnO₃ 0.5LiNi_0.5Mn_0.5O₂, was prepared by citric acid-assisted sol–gel method and its electrochemical performance was investigated. It delivered a charge capacity of 270 mAh g^?1 and a discharge capacity of 189 mAh g^?1 in the first cycle. With the increase of current density from 14 to 28 mA g^?1, the discharge capacity dropped severely to 130 mA g^?1. Obviously, the rate capability of the material was inferior to most of the oxide cathode materials. The diffusion coefficient of this material was calculated to be 6.04?×?10^?12 cm² s^?1 from the results of cyclic voltammetry measurements. Moreover, diffusion coefficients between 3.13?×?10^?12 and 1.22?×?10^?10 cm² s^?1 in the voltage range of 3.8–4.7 V were obtained by capacity intermittent titration technique. This, together with the localized Li₂MnO₃ domains in the crystal structure, may validate the poor rate capability.     

A facile synthesis about amorphous CoS<Subscript>2</Subscript> combined with first principle analysis for supercapacitor materials

The structure and electrochemical properties of amorphous CoS₂ and crystalline CoS₂ have been studied with both experimental characterization and theoretical calculations. In the field of experimental characterization, a facile chemical precipitation method is used to synthesize amorphous and crystalline CoS₂ samples with calcining temperatures of 200 and 280 °C, respectively. Comparing with crystalline CoS₂, amorphous structure of CoS₂ manifests great electron conductivity, effective porous structure, and exhibit a high specific capacitance of 996.16 F g^?1 at current density of 0.5 A g^?1, excellent rate capability of 89.8% retention with the current density ranging from 0.5 to 5 A g^?1, and a great cycling stability of 97.6% retention after 10,000 cycles at 2 A g^?1 in 6 mol L^?1 KOH aqueous electrolyte. In the area of theoretical calculation, we used the first principle and obtained the band structure with band gap of 0.00369 eV and DOSs with high locality of D-orbital from 69.88689 electrons/eV main peak, in the CoS₂ amorphous. The result confirms that amorphous CoS₂ have higher conductivity than crystalline CoS₂ in theory. In addition, the as-assembled asymmetric supercapacitor of Co-S-200//AC also exhibits the maximum specific capacitance of 104 F g^?1 within a cell voltage from 0 to 1.5 V at current density of 0.5 A g^?1 and indicates a great cycling stability of 95.68% and excellent capacitance behavior. All results demonstrate a great potential of amorphous CoS₂ active material for supercapacitors.     

Vertical-slate-like MoS2 nanostructures on 3D-Ni-foam for binder-free,low-cost,and scalable solid-state symmetric supercapacitors

Here, we report binder-free vertical-slate-like MoS₂ nanostructures on 3D-Ni-Foam (VSL-MoS₂@3D-Ni foam) for low-cost high-performance solid-state symmetric supercapacitors (SSCs). The cost-effective, ecofriendly and scalable solvothermal method and its direct incorporation of VSL-MoS₂@3D-Ni-foam yield SSCs with excellent electrochemical properties with a wide potential window of 1.0?V. Furthermore, high specific capacitance of 34.1?F?g^?1 at a current density of 1.3?A?g^?1, an energy density of 4.7?W?h?kg^?1 at a high-power density of 650?W?kg^?1, and excellent stability with ～82.5% capacitance retention after 10,000 cycles were demonstrated even for SSCs with a binder free MoS₂ electrodes on 3D-Ni-foam. These excellent features of the SSCs with VSL-MoS₂@3D-Ni-foam substantiate their potential opportunity for future energy applications.     

Structure Dependence of Fe‐Co Hydroxides on Fe/Co Ratio and Their Application for Supercapacitors

Fe‐Co hydroxides with different Fe/Co atomic ratios grown on nickel foams are synthesized by one‐step electrochemical deposition. The prepared samples are characterized by X‐ray diffraction, X‐ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. It was found that the influence of initial Fe/Co ratios in the precursor solutions on the structure and electrochemical performance of electrodeposited products is significant. Fe(OH)₃ shows particle shape with average diameter of 200 nm. With addition of Co ions, frame‐like structure consisting of smaller particles is formed for Fe‐Co hydroxides. Based on the morphology of Co(OH)₂, it is deduced that Co(OH)₂ serves as a network former constructing a tridimensional frame network structure. Fe‐Co hydroxide with Fe/Co ratio of 1:1 exhibits two types of structure features: nanoflake‐like network structure overall and nanoparticle structure with numerous mesoporous microscopically. As the supercapacitor electrode materials, the as‐prepared Fe‐Co hydroxide electrode with Fe/Co ratio of 1:1 exhibits highest specific capacitance of 2255.6 F g^?1 at the current density of 1 A g^?1 and also shows good cycling performance of 73.5% capacity retention at current density of 10 A g^?1 after 2000 cycles. This work provides a facile method to produce promising Fe‐Co hydroxide electrode materials with high performance for supercapacitors.     

Synthesis of hierarchical MoS<Subscript>2</Subscript> microspheres composed of nanosheets assembled via facile hydrothermal method as anode material for lithium-ion batteries

A hierarchical MoS₂ architecture composed of nanosheet-assembled microspheres with an expanded interplanar spacing of the (002) planes was successfully prepared via a simple hydrothermal reaction. Electron microscopy studies revealed formation of the MoS₂ microspheres with an average diameter of 230 nm. It was shown that the hierarchical structure of MoS₂ microspheres possesses both the merits of nanometer-sized building blocks and micrometer-sized assemblies, which offer high surface area for fast kinetics and buffers the volume expansion during lithium insertion/deinsertion, respectively. The micrometer-sized assemblies were found to contribute to the enhanced electrochemical stabilities of the electrode materials. The mentioned advantages of the MoS₂ electrode prepared in this work allowed enhanced cyclability and high rate capability of the material. Along with this, the material delivered a high initial discharge capacity of 1206 mAh g^?1 and a reversible discharge capacity of 653 mAh g^?1 after 100 cycles at a current density of 100 mA g^?1. Furthermore, the material delivered a high reversible capacity of 480 mAh g^?1 at a high current density of 1000 mA g^?1.     

Promising nitrogen-doped porous nanosheets carbon derived from pomegranate husk as advanced electrode materials for supercapacitors

Nitrogen-doped porous activated carbons (N-PHACs) have been successfully synthesized using pomegranate husk as carbon precursor via ZnCl₂-activation carbonization and subsequent urea-assisted hydrothermal nitrogen-doping method. The obtained N-PHACs possesses abundant mesoporous structure, high specific surface area (up to 1754.8 m² g^?1), pore volume (1.05 cm³ g^?1), and nitrogen-doping content (4.51 wt%). Besides, the N-PHACs-based material showed a high specific capacitance of 254 F g^?1 at a current density of 0.5 A g^?1 and excellent rate performance (73% capacitance retention ratio even at 20 A g^?1) in 2 M KOH aqueous electrolyte, which is attributed to the contribution of double-layer capacitance and pseudocapacitance. The assembled N-PHACs-based symmetric capacitor with a wide operating voltage range of 0–1.8 V exhibits a maximum energy density of 15.3 Wh kg^?1 at a power density of 225 W kg^?1 and superior cycle stability (only 6% loss after 5000 cycles) in 0.5 M Na₂SO₄ aqueous electrolyte. These exciting results suggest that the novel N-doping porous carbon material prepared by a green and low-cost design strategy has a potential application as high-performance electrode materials for supercapacitors.     

Polyvinyl pyrrolidone-assisted synthesis of flower-like nickel-cobalt layered double hydroxide on Ni foam for high-performance hybrid supercapacitor

Nickel-cobalt layered double hydroxides (NiCo-LDH) were successfully deposited on nickel foam by a facile hydrothermal method using polyvinyl pyrrolidone (PVP) as the structure-directing reagent. The effect of PVP on the morphology and electrochemical performance of binder-free NiCo-LDH electrode for supercapacitor were investigated in detail. The prepared NiCo-LDH presented good dispersivity and appeared different flower-like structure via the addition of PVP. Specially, the NiCo-LDH electrode using 1 g of PVP exhibited a superior performance with a high-specific capacity of 724.9 C g^?1 at a current density of 1 A g^?1 and 577.1 C g^?1 at 10 A g^?1. In addition, a hybrid supercapacitor (HSC) based on the optimized NiCo-LDH as positive electrode and activated carbon as negative electrode was assembled with 6 M KOH as the electrolyte. The HSC device can deliver an energy density of 32.3 Wh kg^?1 at the power density of 387.1 W kg^?1. Moreover, the HSC device exhibited a good cycling stability with a retention rate of 94.0% after 2000-cycle charge-discharge test at 3 A g^?1.     

Nanoporous carbon microspheres as anode material for enhanced capacity of lithium ion batteries

Nanoporous carbon microspheres (NCMs) are prepared by a one-step carbonizing and activating resorcinol?formaldehyde polymer spheres (RFs) in inert and CO₂ atmosphere for anode materials of lithium-ion batteries (LIBs). Compared with RFs carbon microspheres (RF-C), after activating with hot CO₂, the NCMs with porous structure and high BET surface area of 2798.8 m² g^?1, which provides abundant lithium-ion storage site as well as stable lithium-ion transport channel. When RF-C and NCM are used to anode material for LIBs, at the same current density of 210 mA g^?1, the initial specific discharge capacity are 482.4 and 2575.992 mA h g^?1, respectively; after 50 cycles, the maintain capacity are 429.379 and 926.654 mA h g^?1, respectively. The porous spherical structure of NCM possesses noticeably lithium-ion storage capability, which exhibits high discharge capacity and excellent cycling stability at different current density. The CO₂ activating carbonaceous materials used in anode materials can tremendously enhance the capacity storage, which provides a promising modification strategy to improve the storage capacity and cyclic stability of carbonaceous anode materials for LIBs.     

Multi-hierarchical nanosheet-assembled chrysanthemum-structured Na<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C as electrode materials for high-performance sodium-ion batteries

The structure and morphology of sodium vanadium phosphate (Na₃V₂(PO₄)₃) play a vital role in enhancing the electrochemical performance of sodium-ion batteries due to the inherent poor electronic conductivity of the phosphate framework. In order to improve this drawback, a new chrysanthemum-structured Na₃V₂(PO₄)₃/C material has been successfully assembled with multi-hierarchical nanosheets via a hydrothermal method. Continuous scattering nanosheets in chrysanthemum petals are beneficial in reducing energy consumption during the process of sodium ion diffusion, on which the carbon-coated surface can significantly increase overall conductivity. The as-prepared sample exhibits outstanding electrochemical performance due to its unique structure. It rendered a high initial specific capacity of 117.4?mAh?g^?1 at a current density of 0.05 C. Further increasing the current density to 10 C, the initial specific capacity still achieves 101.3?mAh?g^?1 and remains at 87.5?mAh?g^?1 after 1000 cycles. In addition, a symmetrical sodium-ion full battery using the chrysanthemum-structured Na₃V₂(PO₄)₃/C materials as both the cathode and anode has been successfully fabricated, delivering the capacity of 62?mAh?g^?1 at 1?C and achieving the coulombic efficiency at an average of 96.4% within 100 cycles. These results indicate that the new chrysanthemum-structured Na₃V₂(PO₄)₃/C can provide a new idea for the development of high-performance sodium-ion batteries.     

Facile synthesis and characterization of high-performance NiMoO<Subscript>4</Subscript> · <Emphasis Type="Italic">x</Emphasis>H<Subscript>2</Subscript>O nanorods electrode material for supercapacitors

One-dimensional NiMoO₄ · xH₂O nanorods were synthesized by a facile template-free hydrothermal method as a potential electrode material for supercapacitors. The influences of reaction temperature, reaction time, and nickel source on the properties of resultant samples were investigated. Electrochemical data reveal that the as-synthesized one-dimensional NiMoO₄ · xH₂O nanorod superstructures can deliver a remarkable specific capacitance (SC) of 1131 F g^?1 at a current density of 1 A g^?1 and remain as high as 914 F g^?1 at 10 A g^?1 in a 6 M KOH aqueous solution. Moreover, there is only 6.2 % loss of the maximum SC after 1000 continuous charge–discharge cycles at the high current density of 10 A g^?1. Such outstanding electrochemical performance may be owing to the unique one-dimensional hierarchical structures, which can facilitate the electrolyte ions and electrons to easily contact the NiMoO₄ nanorod building blocks and then allow for sufficient faradaic reactions to take place, even at high current densities.     

Porous Silicon@Polythiophene Core–Shell Nanospheres for Lithium‐Ion Batteries

Polythiophene‐coated porous silicon core–shell nanospheres (Si@PTh) composite are synthesized by a simple chemical oxidative polymerization approach. The polythiophene acts as a flexible layer to hold silicon grains when they are repeatedly alloying/dealloying with lithium during the discharge/charge process. The long lifespan and high‐current‐density rate ­capability (at a current of 8 A g^?1) of the Si@PTh composite are vastly improved compared with as‐prepared Si spheres. Typically, these Si@PTh composite electrodes achieve a reversible capacity of 1130.5 mA h g^?1 at 1 A g^?1 current density after 500 cycles, and can even possess a discharge capacity up to 451.8 mA h g^?1 at 8 A g^?1. The improved electrochemical performance can be ascribed to the synergy effects of the flexible PTh coating and the distinctive core–shell nanospheres with porous structure, which can largely alleviate the volume expansion of the Si during alloying with lithium.     

Three-dimensional carbon fiber as current collector for lithium/sulfur batteries

Ni foam and carbon fiber cloth were tested as three-dimensional (3D) current collectors for a sulfur/polypyrrole composite cathode in lithium batteries. The cell with the carbon fiber current collector has exhibited remarkably enhanced electrochemical performance compared with its Ni foam counterpart, delivering a high initial capacity of 1,278 mAh g^?1 and maintaining a discharge capacity at 810 mAh g^?1 after 40 cycles at 0.06 C. Furthermore, the carbon fiber-based cell demonstrated a better rate capability and delivered a highly reversible discharge capacity of 397 mAh g^?1 after 50 cycles at 0.5 C, representing an increase of 194 mAh g^?1 compared to the Ni foam counterpart. The electrochemical property investigations along with scanning electron microscope studies have revealed that the carbon fiber current collector possesses a three-dimensional network structure, provides an effective electron conduction path, and minimizes the loss of electrical contact within the deposited cathode material during cycling. These results indicate that the carbon fiber cloth can be used as a promising, effective, and inexpensive current collector for Li/S batteries.     

Hierarchical porous ZnMn<Subscript>2</Subscript>O<Subscript>4</Subscript> synthesized by the sucrose-assisted combustion method for high-rate supercapacitors

A simple sucrose-assisted combustion and subsequent high-temperature calcination route have been employed to prepare hierarchical porous ZnMn₂O₄ nanostructure. When used as an electrode for supercapacitor, the ZnMn₂O₄ electrode displays a high specific capacitance of 411.75 F g^?1 at a current density of 1 A g^?1, remarkable capacitance retention rate of 64.28 % at current density of 32 A g^?1 compared with 1 A g^?1, as well as excellent cycle stability (reversible capacity retention of 88.32 % after 4000 cycles). The outstanding electrochemical performances are mainly attributed to its hierarchical porous architecture, which provides large reaction surface area, fast ion and electron transfer, and good structure stability. All these impressive results demonstrate that ZnMn₂O₄ shows promise for its application in supercapacitors.     

Tailoring MoS2 Ultrathin Sheets Anchored on Graphene Flexible Supports for Superstable Lithium‐Ion Battery Anodes

2D MoS₂ has a significant capacity decay due to the stack of layers during the charge/discharge process, which has seriously restricted its practical application in lithium‐ion batteries. Herein, a simple preform‐in situ process to fabricate vertically grown MoS₂ nanosheets with 8–12 layers anchored on reduced graphene oxide (rGO) flexible supports is presented. As an anode in MoS₂/rGO//Li half‐cell, the MoS₂/rGO electrode shows a high initial coulomb efficiency (84.1%) and excellent capacity retention (84.7% after 100 cycles) at a current density of 100 mA g^?1. Moreover, the MoS₂/rGO electrode keeps capacity as high as 786 mAh g^?1 after 1000 cycles with minimum degradation of 54 µAh g^?1 cycle^?1 after being further tested at a high current density of 1000 mA g^?1. When evaluated in a MoS₂/rGO//LiCoO₂ full‐cell, it delivers an initial charge capacity of 153 mAh g^?1 at a current density of 100 mA g^?1 and achieves an energy density of 208 Wh kg^?1 under the power density of 220 W kg^?1.     

Hydrothermal synthesis and high electrochemical performance of ordered mesoporous Co/CMK-3 nanocomposites

A novel ordered mesoporous Co/CMK-3 nanocomposites were successfully fabricated via a facile hydrothermal method. XRD patterns affirmed that the CoCl₂ entirely reduced to metal Co. Cobalt particles were well-dispersed and embedded in the mesochannels of the CMK-3 according to the nitrogen adsorption-desorption technique and transmission electron microscopy (TEM) images. Electrochemical test shows that cobalt nanoparticle can significantly promote the electrochemical properties of CMK-3 leading to a remarkable enhancement of the reversible capacity, cyclic stability, and rate capacity. The Co/CMK-3 nanocomposites were delivering a high reversible capacity of 674 mAh g^?1 at the current density of 50 mA g^?1 after 50 cycles, which was much higher than that of original CMK-3 (400 mAh g^?1). The Co/CMK-3 nanocomposites also demonstrate an excellent rate capability. The improved lithium storage properties of ordered Co/CMK-3 nanocomposites can be attributed to the CMK-3 that could restrain the aggregation of Co nanoparticles, the large surface area of the mesopores in which the Co nanoparticles are formed, as well as presence of Co which played the role of catalyst could promote the lithium storage reaction.     

Graphene‐Based Phosphorus‐Doped Carbon as Anode Material for High‐Performance Sodium‐Ion Batteries

Graphene‐based phosphorus‐doped carbon (GPC) is prepared through a facile and scalable thermal annealing method by triphenylphosphine and graphite oxide as precursor. The P atoms are successfully doped into few layer graphene with two forms of P–O and P–C bands. The GPC used as anode material for Na‐ion batteries delivers a high charge capacity 284.8 mAh g^?1 at a current density of 50 mA g^?1 after 60 cycles. Superior cycling performance is also shown at high charge?discharge rate: a stable charge capacity 145.6 mAh g^?1 can be achieved at the current density of 500 mA g^?1 after 600 cycles. The result demonstrates that the GPC electrode exhibits good electrochemical performance (higher reversible charge capacity, super rate capability, and long‐term cycling stability). The excellent electrochemical performance originated from the large interlayer distance, large amount of defects, vacancies, and active site caused by P atoms doping. The relationship of P atoms doping amount with the Na storage properties is also discussed. This superior sodium storage performance of GPC makes it as a promising alternative anode material for sodium‐ion batteries.     

Fabrication of Ni-Co binary oxide/reduced graphene oxide composite with high capacitance and cyclicity as efficient electrode for supercapacitors

Nickel-cobalt binary oxide/reduced graphene oxide (G-NCO) composite with high capacitance is synthesized via a mild method for electrochemical capacitors. G-NCO takes advantages of reduced graphene oxide (RGO) and nickel-cobalt binary oxide. As an appropriate matrix, RGO is beneficial to form homogeneous structure and improve the electron transport ability. The binary oxide owns more active sites than those of nickel oxide and cobalt oxide to promote the redox reaction. Attributed to the well crystallinity, homogeneous structure, increased active sites, and improved charge transfer property, the G-NCO composite exhibits highly enhanced electrochemical performance compared with G-NiO and G-Co₃O₄ composites. The specific capacitance of the G-NCO composite is about 1750 F g^?1 at 1 A g^?1 together with capacitance retention of 79 % (900/1138 F g^?1) over 10,000 cycles at 4 A g^?1. To research its practical application, an asymmetric supercapacitor with G-NCO as positive electrode and activated carbon as negative electrode was fabricated. The asymmetric device exhibits a prominent energy density of 37.7 Wh kg^?1 at a power density of 800 W kg^?1. The modified G-NCO composite shows great potential for high-capacity energy storage.     

Distinctive slit-shaped porous carbon encapsulating phosphorus as a promising anode material for lithium batteries

A distinctive structure of carbon materials for Li-ion batteries is proposed for the preparation of red phosphorus-carbon composites. The slit-shaped porous carbon is observed with aggregation of plate-like particles, whose isotherm belongs to the H3 of type IV. The density functional theory (DFT) method reveals the presence of micro-mesopores in the 0.5–5 nm size range. The unique size distribution plays an important role in adsorbing phosphorus and electrochemical performance. The phosphorus-slit-shaped porous carbon composite shows initial capacity of 2588 mAh g^?1, reversible capacity of 1359 mAh g^?1 at a current density of 100 mA g^?1. It shows an excellent coulombic efficiency of ～99 % after 50 cycles.