A synthesis of esters, amides, and sulfones bearing a 1-cyclopentenyl group at the α-position from cyclobutanones with one-carbon ring-expansion

Treatment of 1-chlorovinyl p-tolyl sulfoxides, derived from cyclobutanones and chloromethyl p-tolyl sulfoxide, with lithium enolate of carboxylic acid tert-butyl esters, lithium enolate of carboxylic acid N,N-dimethylamides, or lithium α-carbanion of alkyl phenyl sulfones gave adducts in high yields. The adducts were treated with isopropylmagnesium chloride or ethylmagnesium chloride in dry toluene to give esters, amides, and sulfones bearing a 1-cyclopentenyl group at the α-position in moderate to good yields with one-carbon ring-expansion via magnesium carbenoid 1,2-CC insertion reaction. The magnesium carbenoid 1,2-CC insertion reaction proved to be highly stereospecific. The reaction mechanism and origin of the specificity are described.     

New synthetic approach to α-fluoro-β-arylvinyl sulfones and their application in Diels-Alder reactions

A new pathway towards α-fluoro-β-arylvinyl sulfones was elaborated. The reaction of β-bromo-β-fluorostyrenes with sodium 4-methylphenylsulfinate proceeds with maximum 94:6 stereoselectivity and 72-90% yields. The formed α-fluoro-β-arylvinyl sulfones were found to be good dienophiles for Diels-Alder reactions with simple 1,3-dienes. From corresponding (E)-configured dienophiles and cyclopentadiene, cycloadducts bearing the fluorine substituent in exo-position were formed predominantly, while with diphenylisobenzofuran the products with endo-orientation of the fluorine were obtained as the major products. From these cycloadducts, as a proof of principle, p-toluenesulfinic acid was eliminated to give 2-fluoro-3-(4-nitrophenyl)norbornadiene, the formal [4+2]-cycloadduct of cyclopentadiene and 1-fluoro-2-(4-nitrophenyl)acetylene, or the corresponding diphenylisobenzofuran cycloadducts, respectively. This reaction was not successful when other β-hydrogen atoms are accessible for elimination.     

Aza-Henry reaction of substituted nitroalkanes using α-formamidoaryl sulfones as N-acylimino equivalents

Base-promoted elimination of p-toluenesulfinic acid from N-formamidoaryl sulfones leads to the corresponding N-acylimines that react with primary and secondary nitronate anions giving anti-β-formamido nitroderivatives in good yields and high diastereoselectivity.     

Access to lincomycin N-oxide isomers controlled by reaction conditions

Oxidation of lincomycin with H₂O₂ in alkaline media leads to N-oxides, besides the conversion of thiomethyl group into sulfoxides and sulfones. NH₄OH favors formation of the S-isomer; both R- and S-isomers of the N-oxide are formed in the presence of NaOH. Addition of acetonitrile markedly accelerates the reaction.     

2-(N-Hydroxylamino) sulfone synthesis by indium-iodine-triggered aza-Michael type addition of nitroarenes to vinyl sulfones

One-pot reduction-triggered 1,4-addition reaction of various nitroarenes to the α,β-unsaturated sulfones was investigated. In the presence of indium/iodine in MeOH at room temperature, nitroarenes reduced in situ reacted with vinyl sulfones and produced β-(N-hydroxylamino) sulfones in good yields.     

Photoacid generators (PAGs) based on N-acyl-N-phenylhydroxylamines for carboxylic and sulfonic acids

Simple and efficient photoacid generators (PAGs) for carboxylic and sulfonic acids based on N-acyl-N-phenylhydroxylamines have been demonstrated. Irradiation of o-carboxylates and thermally rearranged o-arenesulfonates of N-acyl-N-phenylhydroxylamines using UV light (≥254 nm) in aqueous methanolic solution resulted in efficient generation of carboxylic and sulfonic acids, respectively. The carboxylic acid generation ability of N-acyl-N-phenylhydroxylamines was found to be dependent on their N-acyl substituents. Further, polymer bearing o-arenesulfonates of N-acyl-N-phenylhydroxylamine was synthesized and demonstrated as PAG for sulfonic acids.     

Mechanism of the exclusive cyclic 1,3-rearrangement of O-benzoyl-N-(p-toluenesulfonyl)-n-arylhydroxylamines

O-(p-Substituted benzoyl)-N-(p-toluenesulfonyl)-N-arylhydroxylamines (1) were found to rearrange thermally giving o-acyloxy-p-toluenesulfonanilides (2) in quantitative yields. An intramolecular concerted cyclic process is considered to be in operation for the rearrangement on the basis of ¹⁸O tracer and kinetic experiments. The effects of both substituents and solvents on the rate of this novel 1,3-acyloxy migration were also examined. While the effect of solvent was small, the electronic effect of substituents on both N and O atoms plays a significant role in determining the mechanism of the rearrangement, especially the mode of cleavage of the NO bond at the transition state of the 1,3-acyloxy migration.     

Product distributions in the addition of the hydride ion to cyclopentadienyliron complexes of substituted benzenes

Fifteen [C₆H₅(X)FeCp]⁺ cations with substituents X having different electron-donating or electron-withdrawing effects were treated with NaBH₄ in glyme or THF. The relative distributions of products from o-, m-, p- and ipso-additions of the hydride ion to the arene ring were determined by high resolution ¹H NMR. For the η⁶-N,N-dimethylaniline-η⁵-cyclopentadienyliron cation with the most electron-donating of the substituents studied, only m- and p-hydride addition products were obtained, while in the reaction with the η⁶-nitrobenzene-η⁵-cyclopentadienyliron cation, which contained the most electron-withdrawing of the substituents investigated, only the o-addition product was formed. For the other 13 cations, with X  C₆H₅O, CH₃O, p-CH₃C₆H₄S, C₆H₅CH₂, (CH₃)₃C, CH₃, CH₃CH₂, C₆H₅, Cl, COOCH₃, C₆H₅CO, CN and p-CH₃C₆H₄SO₂, o-, m- and p-hydride addition products were obtained in all cases, with a few instances also giving very minor amounts of ipso-adducts. The relative product distributions observed were interpreted by suggesting that while electronic effects played a major role, steric factors and free valency effects favoring o-addition as suggested by MO calculations [5] could also exert their influence in giving rise to the overall results.     

Electronic effects of icosahedral carboranes: mechanistic alteration in solvolysis of α-(o-carboranyl)benzyl tosylates by electronic effect of substituents

Solvolysis of α-(o- and m-carboranyl)benzyl toluene-p-sulfonates bearing a range of substituents at the 3- or 4-position of the benzyl group has been investigated. The rates of hydrolysis of m-carboranyl derivatives increased linearly with increasing electron-releasing character of the substituent group (ρ=−5.37 correlated to σ⁺), which indicates that the hydrolysis proceeds through a typical S_N1 process. In contrast, the hydrolysis rates of the o-carboranyl derivatives with a wide range of electron-withdrawing substituents did not show significant change, but suddenly began to show a linear increase with increasing electron-releasing character of the substituents (ρ=−5.91 correlated to σ⁺). Moreover, the optical purity of the retentive hydrolysis of the o-carboranyl derivatives rapidly declined with increasing electron-donating effects of the substituents. This indicates that the mechanism of the hydrolysis changes from the retentive mechanism to an S_N1 mechanism.     

Inorganic base-catalyzed formation of antivirally active N-substituted benzamides from α-amido sulfones and N-nucleophile

Background

Heteronucleophiles as well as carbanionic reagents can be used to react with α-amido sulfones, thus giving the opportunity to prepare a large array of amino derivatives. Since, novel 1,3,4-oxadiazole-2-thiol derivatives can serve as potent nucleophiles, we employed 5-subsititued phenyl-1,3,4-oxadiazole-2-thiols as the nucleophilic source of nitrogen in the reaction with α-amido sulfones.

Results

A series of N-substituted benzamides bearing 1,3,4-oxadiazol unit were prepared for the first time by the reaction of in situ generated protected imine from α-amido sulfones with 5-subsititued phenyl-1,3,4-oxadiazole-2-thiols as the source of nitrogen nucleophile. Some of the synthesized products displayed favourable antiviral activity against cucumber mosaic virus (CMV) in preliminary antiviral activity tests. The title compounds 5c, 5o and 5r revealed curative activity of 42.2%, 48.7% and 40.5%, respectively against CMV (inhibitory rate) compared to the commercial standard Ningnanmycin (53.4%) at 500 μg/mL.

Conclusion

A practical synthetic route to N-benzoyl-α-amido sulfones by the reaction of 5-subsititued phenyl-1,3,4-oxadiazole-2-thiols as the source of nitrogen nucleophiles with in situ generated protected imine from N-benzoyl-α-amido sulfones is presented. The reaction catalyzed by an inorganic base has considerable significance to exploit the potential of α-amido sulfones in organic synthesis.     

Catalytic Enantioselective Cyclopropylalkynylation of Aldimines Generated In Situ from α-Amido Sulfones

A convenient procedure of synthesis of N-carbamoyl-protected propargylic amines substituted with a cyclopropyl group from α-amido sulfones and cyclopropylacetylene is described. The reaction is catalyzed by a chiral BINOL-type zinc complex and provides the corresponding products in good yields and enantioselectivities.     

1-Butyl-3-methylimidazolium p-toluenesulfinate: a novel reagent for synthesis of sulfones and β-ketosulfones in ionic liquid

A novel task-specific ionic liquid, 1-butyl-3-methylimidazolium p-toluenesulfinate, [bmim][p-TolSO₂] has been synthesized and used as a nucleophile for the reaction with alkyl bromides and phenacyl bromides to prepare sulfones and β-ketosulfones in excellent yields (80-93%) in [bmim][BF₄] ionic liquid. The isolated yields of sulfones and β-ketosulfones were higher in [bmim][BF₄] than other organic solvents at room temperature.     

Thermal stability of para- and ortho-isomers of tris-decyl-(ethyl-benzyl)-ammonium chloride

Thermal stability of para (p--) and ortho (o-) isomers was investigated by CRTG and reaction kinetic analysis. The temperature started the mass decrease of o-isomer was about 20°C lower than that of p-isomer by CRTG. The activation energies of thermal decomposition of o- and p-isomers were 136.9 and 153.4 kJ mol^–1, respectively. The effect of steric hindrance on heat of formation was calculated by AM1 method using Win MOPAC3.0 for the model compound of p- and o-isomers. The lower stability of o-isomer was the results of the steric hindrance between the ethylene unit of aromatic ring and three alkyl chains.     

Factors affecting the efficiency and stereoselectivity of α-amino acid synthesis by the Petasis reaction

The use of chiral secondary amines containing only one branched substituent has been shown to give optimal yields and stereoselectivities in the preparation of α-amino acids using the Petasis reaction. While the use of chiral primary amines generally gives products in low to moderate diastereoselectivity, chiral secondary amines generally give products in >95:5 diastereoselectivity. Additionally, the use of amines with two chiral (and by definition, branched) N-alkyl substituents results in significantly reduced yields with respect to to secondary amines with one or no branched N-alkyl substituents.     

Cyclization and rearrangement products from coupling reactions between terminal o-alkynylphenols or o-ethynyl(hydroxymethyl)benzene and 6-halopurines

Cyclization reactions on 6-[(2-hydroxyphenyl)ethynyl]purines, 6-[(2-hydroxymethylphenyl)ethynyl]purines and 6-[(2-hydroxyphenyl)propyn-1-yl]purines have been studied. 6-(2-Benzofuryl)purines are readily available via a one-pot Sonogashira coupling-cyclization between 6-iodopurine and 2-ethynylphenol. When the same reaction was performed with o-(hydroxymethyl)ethynylbenzene, 6-[isobenzofuran-1(3H)-ylidenemethyl]purine was formed, mainly as the (E)-isomer. Acid catalyzed isomerization of the (E)-compound afforded the (Z)-isomer. The latter compound was also formed from a two-step reaction; Sonogashira coupling with O-silylated alkyne followed by deprotection and subsequent 5-exo cyclization. Sonogashira coupling between 6-halopurines and 2-propynylphenol gave only the alkyne coupling product and no cyclization took place. However, the Sonogashira product was unexpectedly rearranged to 6-(3-phenoxypropa-1,2-dienyl)purines under basic conditions. Theoretical calculations demonstrated that the allenes are more stable than their alkyne isomers.     

One-pot synthesis of substituted indolines via a copper-catalyzed sequential multicomponent/C-N coupling reaction

One-pot synthesis of 2-(N-sulfonylimino)indolines has been developed. The procedure combines the copper-catalyzed three-component reaction of sulfonyl azides, o-bromophenylacetylenes, and amines and the copper-catalyzed intramolecular C-N coupling in one sequence, which afforded the products in moderate to good yields. The resulting 2-(N-sulfonylimino)indolines could be easily transformed to pharmaceutically valuable oxindoles (indolin-2-ones).     

Methods for the structural investigation of xanthones: Part II. Location of hydroxyl groups by ultraviolet and visible spectroscopy1

Ultraviolet spectral shifts in presence of certain additives may be used to determine the hydroxylation pattern of xanthones. Thus, 3-hydroxyxanthones are characterized by an intense band around 355 nm which appears in presence of sodium hydroxide, o- and p-Dihydroxyxanthones decompose in presence of this reagent, the reaction rate depending on the position of the substituents. While the spectra of 1-and 2-hydroxyxanthones do not suffer modification in presence of sodium acetate, 3- and 4-hydroxy groups produce typical shifts which are dependent on the presence of additional oxygen functions. The spectra of 1-hydroxy-, as well as of o-dihydroxyxanthones, are affected by the addition of aluminum chloride. 1- and 4-Hydroxy groups with unsubstituted p-positions may be detected and distinguished through the visible spectrum (350–750 nm) of the reaction product of the xanthone with 2,6-dichlorobenzoquinone chloroimide (Gibbs test). Relatively acidic hydroxyls give rise to two maxima in this region. Two maxima, even if of different relative intensity, are also obtained with o- and p-dihydroxy-, as well as with o- and p-hydroxyallylxanthones.     

Synthesis of (arylselanyl)- and (arylsulfenyl)-alkyl-1,2,3-triazolo-1,3,6-triazonines via a copper-catalyzed multicomponent reaction

An efficient copper-catalyzed multicomponent reaction was developed for the synthesis of (arylselanyl)- or (arylsulfenyl)-alkyl-1,2,3-triazolo-1,3,6-triazonines. The products were obtained in moderate to excellent yields via the reaction of o-phenylenediamine, 2-azidobenzaldehyde and different arylchalcogenyl alkynes using catalytic copper iodide in 1,4-dioxane at 100?°C. The reactions tolerated a range of substituents on the arylchalcogenyl alkynes and proved to be an efficient methodology for the combinatorial synthesis of new selenium or sulfur-containing triazonine derivatives.     

Synthesis of Carbazoles and Dibenzofurans via Cross-Coupling of o-Iodoanilines and o-Iodophenols with Silylaryl Triflates and Subsequent Pd-Catalyzed Cyclization

An efficient route to a variety of carbazoles and dibenzofurans has been developed. It involves the reaction of o-iodoanilines or o-iodophenols with silylaryl triflates in the presence of CsF to afford the N- or O-arylated products, which are subsequently cyclized using a Pd catalyst to carbazoles and dibenzofurans in good to excellent yields. By using this methodology, the carbazole alkaloid, mukonine has been synthesized in 76% overall yield in three steps.     

New synthesis of allylidenecyclobutanes by the reaction of cyclobutylmagnesium carbenoids with vinyl sulfones

The reaction of cyclobutylmagnesium carbenoids, which were generated from 1-chlorocyclobutyl p-tolyl sulfoxides with EtMgCl via the sulfoxide-magnesium exchange reaction at low temperature, with carbanions derived from vinyl sulfones with n-BuLi or LDA resulted in the formation of allylidenecyclobutanes in moderate to good yields. The actual reactive species of the sulfones in this reaction were proved to be the lithium α-sulfonyl carbanion of allyl sulfones derived from the vinyl sulfones by double bond migration with the bases used. Mono- and di-substituted allylidenecyclobutanes can be obtained by using a variety of vinyl sulfones.