A facile synthesis and the asymmetric catalytic activity of BINOL-based thiazole (thiadiazole) thioether ligands

Four new BINOL-based thiazole (thiadiazole) thioether ligands (S)-1, (S)-2, (S,S)-3 and (S)-4 were prepared. When their catalytic effectiveness was tested, good results (up to 93% ee and 97% yield) were obtained in the asymmetric addition of diethylzinc to aldehydes while poor results were obtained in the asymmetric conjugate addition of diethylzinc to enones.     

One pot synthesis of imidazo[2,1-b]thiazoles and benzo[d]thiazolo[3,2-a]imidazoles

A series of imidazo[2,1-b]thiazole and benzo[d]thiazolo[3,2-a]imidazole analogues were synthesized by stirring an equimolar mixture of dibenzoylacetylene with imidazole/thiazole derivatives in toluene or acetonitrile at room temperature. The products were generated in good yields and characterized by standard analytical techniques such as IR, ¹H NMR, ¹³C NMR and mass spectrometry. The structure of products 19, 20, 22, 24 and 25 were also unambiguously confirmed by single crystal X-ray analysis.     

Highly efficient, multigram and enantiopure synthesis of (S)-2-(2,4′-bithiazol-2-yl)pyrrolidine

(S)-2-(4-Bromo-2,4′-bithiazole)-1-(tert-butoxycarbonyl)pyrrolidine ((S)-1) was obtained as a single enantiomer and in high yield by means of a two-step modified Hantzsch thiazole synthesis reaction when bromoketone 3 and thioamide (S)-4 were used. Further conversion of (S)-1 into trimethyltin derivative (S)-2 broadens the scope for further cross-coupling reactions.     

Solvent-free one-pot reactions for annulating a pyrimidine ring on thiazoles under microwave irradiation

One-pot reactions of glycine, acetic anhydride and thiazole Schiff bases (2a-f) diastereoselectively and expeditiously annulate a pyrimidine ring on the thiazole nucleus to yield 6,7-dihydro-5H-thiazolo[3,2-a]pyrimidin-5-ones (4a-f) under microwave irradiation and solvent-free conditions.     

Stable but chimeric antiaromatic 1H-azirines? A threefold reinvestigation

Three different reports on the syntheses of isolable 1H-azirines 6, 15, and 21 were reinvestigated. Instead of the claimed heterocyclic product 6, the isomeric thiazole derivative 7 has been isolated now with nearly identical yield. In the case of the asserted bicyclic 1H-azirine 15, the corrected structure includes the isomeric 3-aminomaleimide moiety of 18. A mechanism to explain the formation of this substance is suggested. The isolation of the antiaromatic compound 21 has also to be rejected. Thus, 1H-azirines keep their classification as very elusive high-energy intermediates.     

Dopamine derivatives from the insect Polyrhachis dives as inhibitors of ROCK1/2 and stimulators of neural stem cell proliferation

Polyrhachis dives is consumed as an insect food in some regions of China. In this study, new dopamine derivatives, (+)-polyrhadopamine A (1a) and (−)-polyrhadopamine A (1b), (+)-polyrhadopamine B (2a) and (−)-polyrhadopamine B (2b), and polyrhadopamines C–E (3–5), were isolated from this species. The structures and stereochemistry of these substances were assigned by using spectroscopic and computational methods. Compounds 1a, 1b, 2a, and 2b are dimeric N-acetyldopamine derivatives, 3 is a dopamine analog containing an unusual sulfone group, and 4 and 5 possess a rare benzo[d]thiazole moiety. The functions of these substances as ROCK1/2 inhibitors, neural stem cell (NSCs) proliferation stimulators, immunosuppressive, and anti-inflammatory agents were determined.     

Synthesis of the anionic fluororeceptors based on thiourea and amide groups and recognition property for α,ω-dicarboxylate

Three new neutral receptors (1, 2 and 3) containing thiourea and amide groups were synthesized by simple steps in good yields. The binding properties for anions of 1, 2 and 3 were examined by UV-vis, fluorescence, and ¹H NMR spectroscopy. Receptors 1, 2 and 3 all had a better adipate anion selectivity by comparison with other dicarboxylate anions. The association constants of 1, 2 and 3 with adipate were higher as compared to other anions (malonate, succinate, glutarate). In particular, a distinct color change was observed from light yellow to orange-red upon addition of adipate to the solution of 1 in DMSO. The UV-vis and fluorescence data indicate that a 1:1 stoichiometry complex is formed between compound 1, 2 or 3 and dicarboxylate anions through hydrogen bonding interactions.     

Synthesis of eight-membered iminocyclitols from d-glucose

The Baylis-Hillman reaction of 3-O-benzyl-α-d-xylo-pentodialdo-1,4-furanose 2 afforded a diastereomeric mixture of l-ido- and d-gluco-configurated α-methylene-β-hydroxy esters 3a and 3b, respectively, in 1:1 ratio. Conjugate addition of benzyl amine on 3a gave adduct 4a as a major product while, addition of benzyl amine to 3b gave only one diastereomer 4b. Reduction of ester functionality in 4a/4b, opening of 1,2-acetonide functionality followed by reductive amino-cyclization under hydrogenation condition afforded azocanes 1c/1d in good yield.     

An efficient synthesis of benzofurans and their application in the preparation of natural products of the genus Calea

The intramolecular cyclization of the β-substituted olefins methyl 2-aryloxy-3-dimethylaminopropenoates 3a-3f catalyzed by Lewis acids leads to a short and novel synthesis of benzofurans 2a-2f. When the olefins 4-dimethylamino-3-aryloxy-3-buten-2-ones 4a-4f were used, the cyclization process was faster and provided the corresponding substituted 2-acetylbenzofurans 1a-1f. Among the latter, naturally occurring compounds calebertin (1a), caleprunin A (1b), and caleprunin B (1c) were prepared in good overall yields. These benzofurans were also obtained by direct treatment under MW irradiation of the precursors 1-aryloxypropan-2-ones 7a-7c with DMFDMA, followed by addition of the catalyst, resulting in a route that was one step shorter.     

Quinoxalines. Part 12: Synthesis and structural study of 1-(thiazol-2-yl)-1H-pyrazolo[3,4-b]quinoxalines—the dehydrogenative cyclization with hydroxylamine hydrochloride

Starting with 2-acetylquinoxaline a novel class of heterocyclic compounds, the 1-(thiazol-2-yl)-1H-pyrazolo[3,4-b]quinoxalines 4, were prepared by following two different synthetic procedures: 2-acetylquinoxaline reacted with thiosemicarbazide to the thiosemicarbazones 1a which was (i) cyclized with α-halogeno ketones to the thiazoles 3. These compounds were dehydrogenated in acidic medium to the title compounds 4. (ii) The thiosemicarbazone 1a could be also dehydrogenated using NH₂OH·HCl to the thioamide 5a and these, finally, were cyclized with α-halogeno ketones to the title compounds 4. Only thiazole 3a was isolated, the other thiazoles 3 were dehydrogenated in a one-pot procedure. From the thioamide 5a also both the compounds 9, by reacting with dibromodiacetyl, and 10, by treatment with dimethyl acetylenedicarboxylate, were obtained. The analysis of both the ¹H and ¹³C NMR spectra was not straightforward but could be attained finally by employing the whole arsenal of 1D and 2D NMR spectroscopy.     

Convenient preparation of 4-arylmethyl- and 4-hetarylmethyl thiazoles by regioselective cycloaddition reactions of 3-sulfanyl- and selanylpropargyl alcohols

Complete details of thiazole syntheses by scandium-catalyzed cycloaddition reactions of 1-aryl- and 1,1-bisaryl-3-phenylsulfanylpropargyl alcohols with thioamides are described. Reactions of 1,1-bisarylpropargyl alcohols with thioamides and selenamide in MeNO₂/H₂O resulted in 4-bisarylmethyl-1,3-thiazoles 4aa-ic and 4H-4,4-bisaryl-1,3-thiazines 5ea-ga in high yields. Reactions in MeNO₂/D₂O resulted in 4-bisaryldeuteriomethyl-1,3-thiazoles 10ca-ia with high deuterium purity. Reactions of dialkyl and alkyl aryl propargyl alcohols are also described.     

Synthesis and photophysical properties of five-membered ring π-conjugated materials based on bisthiazol-2-yl-amine and their metal complexation studies

Poly(5,5′-(2-hexyldecyl)-bisthiazol-2-yl-amine) (PBTA) is prepared by nickel(0) mediated Yamamoto-type coupling. The photoluminescence (PL) spectrum of PBTA in THF solution displays pure blue emission with a peak centered at 444 nm without any shoulder peaks and the HOMO and LUMO values for PBTA are estimated to be 5.11  and 2.90 eV, respectively. In addition, we have synthesized a novel bisthiazol-2-yl-amine (BTA)-cored donor-acceptor (D-A) chromophore system, namely 5-(4-(diphenylamino)phenyl)-N-(5-(4-(diphenylamino)phenyl)thiazol-2-yl)-N-octylthiazol-2-amine (2-TPA-BTA) in which the electron-donating (D) moiety is triphenylamine group and the electron-withdrawing (A) unit is thiazole group. Furthermore, in this report, we present the complexation studies of both the BTA and 2-TPA-BTA chromophores with Cu(II) and Pd(II), respectively. The crystal structures are established by single-crystal X-ray diffraction analysis. These studies not only provide the general photophysical principles of the materials based on BTA moiety but also encourage progress toward realizing the full potential of its hybrid metal-organic frameworks.     

Incorporation of an allene unit into 1,4-dihydronaphthalene: generation of 1,2-benzo-1,4,5-cycloheptatriene and its dimerization

1-Bromo-1-fluoro-[1a,2,7,7a]-tetrahydro-1H-cyclopropa[b]naphthalene (19) has been prepared by the addition of bromofluorocarbene to 1,4-dihydronaphthalene (18). Treatment of a solution of 19 in dry ether with MeLi afforded the tricyclic hydrocarbon 17, resulting from the intramolecular C-H insertion of carbene 16, and two dimerization products, the head-to-head 20 and head-to-tail 21 allene dimers, confirming the formation of title cycloallene 15 as a reactive intermediate. B3LYP/6-31G(d) calculation predicts the activation barriers for insertion product 17 and allene product 15 as 3.70 and 9.52 kcal/mol, respectively. This prediction was in good agreement with our experimental results.     

Study on the reactions of fluoroalkanesulfonyl azides with indole derivatives

The reactions of fluoroalkanesulfonyl azides 1 with different indole derivatives have been studied in detail. Treatment of 1 with equimolar amount of 1,3-dimethylindole 3 in 1,4-dioxane at room temperature afforded 2-(1,3-dimethyl-1,3-dihydro-indolinylidene) fluoroalkanesulfonylimines 5 in moderate to good yields. However, under the same reaction conditions, in the case of 1 with 1,2-dimethylindole 4, the corresponding 2-fluoroalkanesulfonyl (1,2-dimethyl-1H-indol-3-yl)-amide 6 was obtained in moderate yields. In addition, the reactions of 1 and indole 7 gave different products under different conditions. Possible mechanisms of these reactions were proposed.     

Exceptional molecular architectures via cycloadditions to pyrenequinones

The thermal reaction of phencyclone (2) with a 1:1 mixture of 1,8-pyrenequinone (4) and 1,6-pyrenequinone (5) yields 2:1 adducts only of compounds 2 and 4. The observed polycyclic aromatic hydrocarbon 8 is formed via double Diels-Alder addition of 2 to 4, and the polycyclic ketone 9 arises from a combination of Diels-Alder and hetero-Diels-Alder reactions of 2 and 4. In contrast, Lewis acid-catalyzed reactions of 2, 4, and 5 give 2:1 adducts only of 2 and 5. The chief product, polycyclic diketone 10, is derived from a double hetero-Diels-Alder addition of 2 to 5. X-ray analysis of compound 8 shows it to be an exceptionally large polycyclic aromatic arch, and the X-ray structure of 10 reveals it to be a chiral molecular tweezer.     

Electrochemical synthesis of 5,6-dihydroxy-2-methyl-1-benzofuran-3-carboxylate derivatives

Electrochemical oxidation of catechols (1a-c) has been studied in the presence of methyl acetoacetate (2a) and ethyl acetoacetate (2b) as nucleophiles in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (1a-c) participate in Michael addition reactions with 2a and 2b to form the corresponding benzofuran derivatives (3a-f). The electrochemical synthesis of 3a-f has been successfully performed in an undivided cell in good yield and purity. The oxidation mechanism was deduced from voltammetric data and by coulometry at controlled potential. The products have been characterized after purification by IR, ¹H NMR, ¹³C NMR, MS, and single crystal X-ray diffraction.     

Microwave-assisted Hantzsch thiazole synthesis of N-phenyl-4-(6-phenylimidazo[2,1-b]thiazol-5-yl)thiazol-2-amines from the reaction of 2-chloro-1-(6-phenylimidazo[2,1-b]thiazol-5-yl)ethanones and thioureas

N-Phenyl-4-(6-phenylimidazo[2,1-b]thiazol-5-yl)thiazol-2-amines (6a-q) have been synthesized by the Hantzsch thiazole reaction of 2-chloro-1-(6-phenylimidazo[2,1-b]thiazol-5-yl)ethanones (4a-e) with suitably substituted thioureas using microwave heating. The ethanones (4a-e) were prepared by the reaction of 6-phenylimidazo[2,1-b]thiazoles (3a-e) with chloroacetylchloride in refluxing 1,4-dioxane whereas the thiazoles (3a-e) were synthesized by the reaction of 2-bromo-1-phenylethanones (2a-e) with thiazol-2-amine in refluxing acetone.     

Diastereoselective addition of nitro compounds to α,β-unsaturated γ-butyrolactones

Herein, we report our results on the diastereoselective addition of nitro compounds to α,β-unsaturated γ-butyrolactones, which afforded the corresponding Michael adducts 9-17 in moderate to good yields and good to excellent diastereoisomeric ratio. A one-pot conversion of α,β-unsaturated γ-butyrolactones 7 and 8 to the corresponding trisubstituted keto-γ-butyrolactones 24 and 25 via a tandem Michael-Nef protocol is also described.     

A facile electrochemical method for the synthesis of phenazine derivatives via an ECECC pathway

Electrochemical oxidation of 2,3-dimethylhydroquinone 1 has been studied in the presence of o-phenylenediamines 3a-c as nucleophiles in aqueous solution, using cyclic voltammetry and controlled potential coulometry. The results indicate that the quinone 2 derived from 2,3-dimethylhydroquinone participates in Michael addition and imine condensation reactions with o-phenylenediamine via an ECECC mechanism, and is converted to the corresponding phenazine derivatives 7a-c and 7′b. The electrochemical synthesis of compounds 7a-c and 7′b has been performed successfully at a carbon rod electrode in an undivided cell with good yields and high purities.     

Substituent effects on the properties of photochromic diarylethenes

Photochromic symmetrical diarylethenes 1o-5o bearing different electron-donating or electron-withdrawing substitutents have been synthesized, and the structures of 1o, 2o, 4o, and 5o were determined by single-crystal X-ray diffraction analysis. Substitutent effects on their optoelectronic properties, including photochromism, fluorescence, and electrochemical properties were investigated in detail. The electron-withdrawing substituents can shift significantly the absorption maxima of the diarylethenes to a longer wavelength and increase their cyclization quantum yield, while the molar absorption coefficients increased with an increasing electron-donating ability. Diarylethenes 1, 2, and 4 show good photochromism both in solution and in the single crystalline phase; however, diarylethenes 5 show no photochromism in the crystalline phase because the distance between the reactive carbons become larger than 4.2 Å. Diarylethenes 1-3 exhibited good fluorescent switching upon alternating irradiation with UV and visible light, and their fluorescent conversions in the photostationary state were all larger than 80% in hexane. In addition, cyclic voltammetry tests showed that different electron-donating and electron-withdrawing substituents had a remarkable effect on the electrochemical behaviors of these diarylethenes.