Sulpholane--A new solvent for the Baylis-Hillman reaction

Sulpholane, a commercially available solvent, is used for the first time as a new solvent for the Baylis-Hillman reaction under ambient conditions; a wide variety of olefins as well as aldehydes participate very efficiently resulting in good to excellent yields of products. Acrylamide also underwent the Baylis-Hillman reaction with 4-nitrobenzaldehyde under these reaction conditions.     

甲醇溶剂中Baylis-Hillman反应机理的DFT研究

在B3LYP/6-311＋＋G**水平下计算研究了三甲胺催化的丙烯醛和甲醛在甲醇溶剂中的Baylis-Hillman反应, 甲醇溶剂效应采用超分子模型研究, 获得了反应中各物种的优化构型及其能量, 探讨了甲醇溶剂中Baylis-Hillman反应的微观过程.     

Baylis-Hillman adducts between pyridine carboxaldehyde derivatives and cyclic enones

Baylis-Hillman (BH) adducts were synthesized using pyridinecarboxaldehyde derivatives and cyclic enones. The Baylis-Hillman reaction was examined by employing various organic tertiary bases and solvents. It was observed that DBU in MeOH as well as imidazole and N-methylimidazole in aqueous MeOH are very effective. These pyridinecarboxaldehydes were reactive and efficient towards the Baylis-Hillman reaction and the resulting adducts are highly stable. The crystal structure for one of the BH adducts was determined.     

Remarkable rate acceleration of water-promoted nucleophilic substitution of Baylis-Hillman acetate: a facile and highly efficient synthesis of N-substituted imidazole

Without additional reagents, the Baylis-Hillman acetates 2 underwent nucleophilic substitution reaction with imidazole readily in aqueous THF solution to afford the corresponding N-substituted imidazole derivatives 3 in good to excellent yields. Moreover, the reaction between the in situ generated DABCO salt of Baylis-Hillman acetates 4 and imidazole occurs in aqueous THF providing the S_N2 type products 5. The simpler operational procedure, better stereoselectivity and higher efficiency over conventional method make the present protocol practical for the preparation of imidazole derivatives.     

Studies on montmorillonite K10-microwave assisted isomerisation of Baylis-Hillman adduct. Synthesis of E-trisubstituted alkenes and synthetic application to lignan core structures by vinyl radical cyclization

The isomerisation of acetates from the Baylis-Hillman adducts with Mont.K10 clay-microwave combination furnished E-trisubstituted alkenes in high yield. The simple Baylis-Hillman adducts with trimethyl orthoformate and unsaturated alcohols under clay catalytic condition gave densely functionalised-isomerized products under solvent free condition. Application of the propargyl derivatives thus obtained from the isomerisation of the Baylis-Hillman adducts with propargyl alcohol has been demonstrated in the synthesis of lignan core structures by tri-n-butyltin hydride mediated vinyl radical cyclization.     

Direct one-pot introduction of 2-methylpyridines to Baylis-Hillman adducts via base-mediated 3-aza-Cope rearrangement

An efficient and regioselective introduction method of 2-methylpyridines to the secondary position of Baylis-Hillman adducts has been developed. A base treatment of 2-methylpyridinium salt of Baylis-Hillman bromide generated N-allylenamine intermediate which underwent a facile 3-aza-Cope rearrangement under mild conditions to produce the product.     

Acceleration of the DABCO-promoted Baylis-Hillman reaction using a recoverable H-bonding organocatalyst

It has been shown that catalytic amounts (20-40 mol %) of bis-aryl (thio)ureas greatly accelerate the DABCO-promoted Baylis-Hillman reaction between a range of aromatic aldehydes and methyl acrylate in the absence of solvent. These robust organocatalysts are superior mole per mole promoters of the reaction than either methanol or water and are recoverable in high yield after the reaction by column chromatography.     

An unexpected highly diastereoselective double Baylis-Hillman reaction of per- (or poly)fluorophenyl aromatic aldimines with methyl vinyl ketone

Aza-Baylis-Hillman reaction of per- (or poly)fluorophenyl aromatic aldimines 1 with methyl vinyl ketone (MVK) was studied. It was found that both the used Lewis base and solvent can significantly affect the reaction. Using triphenylphosphine as a Lewis base, the reaction of 1 with MVK proceeded smoothly to give the normal Baylis-Hillman adduct 2 along with the double Baylis-Hillman adduct 3 as by-product in THF. When 1,4-diazabicyclo[2.2.2]octane was used as a Lewis base in DMF, the aza-Baylis-Hillman reaction of 1 with MVK gave the double aza-Baylis-Hillman adduct 3 exclusively in moderate to good yields with excellent diastereoselectivities. The double Baylis-Hillman adduct 3 was conveniently converted to fluorine-containing 4-alkylidene-2-cyclohexen-1-ones under mild reaction conditions in good yields.     

Hydroxy-assisted catalyst-free Michael addition-dehydroxylation of Baylis-Hillman adducts in poly(ethylene glycol)

Intramolecular hydrogen bonding facilitates nucleophilic addition of sulfones to Baylis-Hillman adducts in a single step to realize the substituted allyl sulfones. The reaction is performed in PEG (400 MW) as solvent, which allows easy solvent recycling.     

丙烯醛和甲醛的Baylis-Hillman反应机理的DFT研究

采用密度泛函DFT-B3LYP方法在6-311++G**基组下计算研究了三甲胺催化的丙烯醛和甲醛的Baylis-Hillman反应的微观过程,获得了两种反应通道(分别对应于顺式-丙烯醛和反式-丙烯醛)的势能面.结合CH3OH溶剂效应,探讨了两种反应通道的微观机理.     

Salt-catalyzed reaction between styrene oxide and silk fibroin

The addition reaction of styrene oxide (StO) with silk fibroin was studied in the presence of various salts in different solvents at 45–75°C. Some water was required to make StO react with silk padded with various salt solutions. The reaction rate increased with the salt concentration and reached a maximum value at a certain concentration of the salt. Padding with solutions of thiosulfate, cyanide, thiocyanate, bicarbonate, or carbonate resulted in high add-ons (to 65 mole/10⁵ g) and low solubilities in HCl and NaOH aqueous solutions. The weight gains increased with the epoxide concentration and reached a constant value at a certain concentration of StO solution in ethanol, while they decreased slightly with epoxide concentration over 10% of StO solution in n-hexane. Histidine, lysine, arginine, tyrosine, and aspartic and glutamic acids were found to react. The reaction rate decreased with increasing solubility parameter of the solvent used, reached a minimum value about at 10 or at the solubility parameter of the epoxide, and then increased with the parameter. The StO–silk reaction may depend on the distribution of StO between aqueous salt and an organic solvent phases, and on the swelling of silk fiber in different aqueous salt solutions or in various organic solvents. The mechanism for this epoxide-silk reaction and the reactivity difference between StO and phenyl glycidyl ether toward silk fibroin are discussed in the light of the observed phenomena.     

Baylis-Hillman reaction in [bdmim][PF6] ionic liquid

A new use of ionic liquid [bdmim][PF₆] as solvent for the Baylis-Hillman reaction is presented. Unlike the commonly used [bmim][PF₆] that evidently reacts with electrophilic aldehydes under basic conditions, ionic liquid [bdmim][PF₆] is inert and the Baylis-Hillman reaction in [bdmim][PF₆] proceeds smoothly with better yield.     

Solution properties of poly(amic acid)–NMP containing LiCl and their effects on membrane morphologies

Physical properties of poly(amic acid) (PAA) casting solutions in N-methyl-2-pyrrolidone (NMP) containing lithium chloride (LiCl) were characterized by viscometry and dynamic light scattering (DLS) and were related to the morphological properties of asymmetric membranes prepared from these solutions. At a fixed polymer concentration, the increase in viscosity of the PAA solutions with increasing LiCl content is mainly determined by the viscosity of the salt–solvent medium, implying that the LiCl–NMP interactions are stronger than those between LiCl and PAA. Because of the strong salt–solvent interactions, complexes between LiCl and NMP are formed. The complexes reduce the solvent power of NMP for PAA inducing polymer aggregation (clustering) and/or transient cross-links in the solutions. Dynamic light scattering results for salt-containing solutions at low PAA concentrations support the existence of these aggregations. Solutions without salt showed a single relaxation, but solutions with LiCl exhibit multiple relaxation modes; two diffusional modes of cooperative and aggregates, and one angle independent transient network mode. The polymer aggregates and transient cross-links form a gel-like structure in the casting solution film and hinder macrovoid formation during phase inversion, resulting in asymmetric membranes with a primarily sponge-like structure.     

Preparation of substituted allyl acetates and sulfones from Baylis-Hillman adducts in ionic liquid media

Reactions of potassium acetate and the sodium salt of p-toluenesulfinic acid with acetates of Baylis-Hillman adducts produce substituted allyl acetates and allyl sulfones respectively. Ionic liquids are utilized in place of conventional solvents.     

非传统介质中的Baylis-Hillman反应

Baylis-Hillman反应是一个为数不多的形成碳—碳键的原子经济反应, 因其产物富含官能团而成为非常有潜力的合成有机多功能分子的有力工具. 然而, 反应速度慢、反应产率低是该反应常遇到的问题. 为了克服这些缺点, 近年来, 许多新颖的溶剂被用于这个反应. 本文综述了这些方面的最新研究进展和发展趋势.     

碱性离子液体的合成及其在Baylis-Hillman 反应中的应用

采用正交实验优化合成了碱性离子液体氢氧化1-丁基-4-二甲氨基吡啶盐, 以其为反应溶剂, 在催化剂DABCO(1,4-二氮杂二环[2.2.2]辛烷)作用下进行了芳香醛与丙烯酸甲酯的Baylis-Hillman 反应研究. 实验结果表明, 在该离子液体的存在下, 芳香醛与丙烯酸甲酯以较快的反应速度和较高产率生成目标化合物. 在此基础上, 进一步研究了水-离子液体复合体系对Baylis-Hillman 反应的影响, 取得了更快的速率及更高的产率.     

Lewis base effects in the Baylis-Hillman reaction of imines with cyclohex-2-en-1-one and cyclopent-2-en-1-one

In the Baylis-Hillman reaction of N-benzylidene-4-methyl-benzenesulfonamide with cyclohex-2-en-1-one or cyclopent-2-en-1-one, we found that, in the presence of a catalytic amount of DMAP, the Baylis-Hillman reaction can be greatly accelerated to give the normal Baylis-Hillman adduct 1 or 3 in good or very high yields: moreover, using PBu3 as a Lewis base in the reaction of N-benzylidene-4-methylbenzenesulfonamide with cyclopent-2-en-1-one, the normal Baylis-Hillman adducts 3 could be obtained in very high yields within 5 h, however, using PBu3 or DBU as a Lewis base in the reaction of N-benzylidene-4-methyl-benzenesulfonamide with cyclohex-2-en-1-one, beside the normal Baylis-Hillman adduct 1 abnormal Baylis-Hillman adduct 3-aryl-2-[(4-methylphenyl)sulfonyl]-2-azabicyclo[2.2.2]octan-5-one 2 was formed at the same time; the substituent's effects were also examined.     

Aza-Baylis-Hillman reactions of diisopropyl azodicarboxylate or diethyl azodicarboxylate with acrylates and acrylonitrile

It has been found that in the Baylis-Hillman reactions of DIAD or DEAD with acrylates or acrylonitrile, the Lewis base and solvent can significantly affect the reaction rate. Using DABCO as Lewis base in DMF or THF, the corresponding aza-Baylis-Hillman adducts 2 or 3 can be obtained in moderate to good yields.     

Studies on the catalytic hydrogenation of Baylis-Hillman derivatives of substituted isoxazolecarbaldehydes. Unusual retention of isoxazole ring during Pd-C-promoted hydrogenation of Baylis-Hillman adducts

Results of the catalytic hydrogenation of Baylis-Hillman adducts obtained from substituted 3-, 4- and 5-isoxazolecarbox-aldehydes and their corresponding acetates in the presence of Raney-Ni and Pd-C are presented. The hydrogenation of Baylis-Hillman adducts of substituted 5-isoxazolecarbaldehydes and 3-isoxazolecarbaldehydes in the presence of Raney-Ni furnishes diastereoselectively syn enaminones over anti and in the presence of boric acid as an additive further enhancement of diastereoselectivity in favor of syn isomer is observed. The Pd-C-promoted hydrogenation of these substrates is also diastereoselective in favor of syn isomer but occurs without the hydrogenolysis of isoxazole-ring. The presence of boric acid as an additive in this hydrogenation exhibits no pronounced effect on diastereoselectivity. The Raney-Ni-mediated hydrogenation of Baylis-Hillman adducts of substituted 4-isoxazolecarbaldehydes yield pyridone derivatives and Pd-C-promoted hydrogenation of the same substrate is diastereoselective to afford the anti isomer of the resulting products. The enaminones derived from Baylis-Hillman adducts of 3- and 5-isoxazolecarbaldehydes serve as versatile precursors for α′-hydroxy-1,3-diketones, which undergo acid-catalyzed ring-closure reaction to afford the furanone derivatives in excellent yields.     

Toward understanding the scope of Baylis-Hillman reaction: synthesis of 3-(2- hydroxyphenyl)indolin-2-ones and polycyclic fused furans

A facile one-pot synthesis of 3-(2-hydroxyphenyl)indolin-2-ones has been developed via the TiCl₄-mediated Baylis-Hillman (B-H) reaction of N-substituted isatins and cyclohex-2-enone, followed by treatment of the in situ generated B-H alcohols with aq HBr. Baylis-Hillman reaction of aromatic cyclic 1,2-diones with cycloalk-2-enones under the influence of TiCl₄ has been successfully performed and the resulting Baylis-Hillman adducts have been conveniently transformed into pentacyclic and hexacyclic fused furan derivatives.