A novel and easy two-step,microwave-assisted method for the synthesis of halophenyl pyrrolo[2,3-b]quinoxalines via their pyrrolo precursors. Evaluation of their bioactivity

A novel, two-step, facile route for the synthesis of pyrrolo[2,3-b]quinoxalines via 2,3-dioxopyrroles, enhanced by microwave irradiation, is presented. The newly synthesized 2,3-dioxo-5-halophenyl pyrrolo precursors 4a–c as well as the non-aromatized ethyl 2-(4-halophenyl)-1-methyl-2,4-dihydro-1H-pyrrolo[2,3-b]quinoxaline-3-carboxylates 6a–c and the aromatized ethyl 2-(4-halophenyl)-1-methyl-1H-pyrrolo[2,3-b]quinoxaline-3-carboxylates 7a–c were evaluated for their antioxidant, cytostatic, and antiviral properties. Most of them proved to be potent hydroxyl radical scavengers and inhibited in vitro lipid peroxidation. The compounds showed moderate antiproliferative activity, while 6a inhibited vaccinia virus at an EC₅₀ value of 2 μM, and 4c and 6c inhibited Sindbis virus at EC₅₀ values of 4 μM.     

A one-pot, two step synthesis of 2,2-disubstituted 1-nitroalkenes

The reactions of ketones 1a-o, nitromethane 2, and a stoichiometric amount of piperidine 3a or ethylenediamine 3b in the presence of mercaptan 6a in THF or CH₃CN solution give high yields of β-nitrosulfides 7a-o. The latter can be oxidized by 8a (m-CPBA or m-CPBA/AcOH) at 0°C, 8b (H₂O₂/AcOH), or 8c (H₂O₂) at room temperature, thus generating β-nitroalkylsulfoxides 9a-o, which then undergo elimination to produce medium to high yields of 2,2-disubstituted-1-nitroalkenes 5a-o, when refluxed in a solution of ClCH₂CH₂Cl (1,2-dichloroethane). After preparation from 1a-o, 2, 3, and 6a, 7a-o were oxidized with 8a, 8b, or 8c in a mixture of CH₃CN and ClCH₂CH₂Cl to generate β-nitrosulfoxides 9a-o, which then underwent elimination under refluxing under one-pot conditions. Compounds 14 and 15g were also prepared using 13, 2, 3b, and 6, in a similar manner.     

Rapid syntheses of (±)-pterocarpans and isoflavones via the gold-catalyzed annulation of aldehydes and alkynes

(±)-Pterocarpan and analogues (4a-c) have been synthesized efficiently via the annulation of salicylaldehydes (1a, 1b and 1c) and o-methoxymethoxylphenylacetylene (2a), followed by a one-pot reduction and acidic cyclization of the ketones (3a-c). In addition, isoflavone derivatives (5a-c) have been synthesized rapidly, in two steps, via the annulation of salicylaldehyde (1a) and arylacetylenes (2b, 2c and 2d), followed by IBX/DMSO oxidation of the isoflavanones (3d, 3e and 3f).     

Facile generation method for conjugated allenyl esters based on retro-Dieckmann-type ring-opening reactions

α-Alkynyl-α-ethoxycarbonyl cyclopentanones 1a-c and cyclohexanones 2a-c were readily synthesized by the reaction of ethyl 2-oxocyclopentanonecarboxylate 6 and ethyl 2-oxocyclohexanonecarboxylate 7 with alkynyllead triacetates 5a-c obtained from lithium acetylides 4a-c and lead tetraacetate. Treatment of 1a-c and 2a-c with 1 N KOH in THF or with n-Bu₄N⁺OEt⁻ in EtOH and THF gave the corresponding conjugated allenyl esters 8a-c, 9a-c, 10a-c, and 11a-c in good to excellent yields, respectively.     

Synthesis and properties of bis(heteroazulen-3-yl)methyl cations and bis(heteroazulen-3-yl)ketones

The synthesis and properties of a novel type of bis(heteroazulen-3-yl)methyl cations, bis(2-oxo-2H-cyclohepta[b]furan-3-yl)methyl cation salt and nitrogen analogues, (9a-c·PF₆⁻) and (9a-c·BF₄⁻), as well as bis(heteroazulen-3-yl)ketones (12a-d) are studied. The synthetic method was based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes (6a-d) with paraformaldehyde to afford the corresponding disubstituted methane derivatives 7a-d, followed by oxidative hydrogen abstraction with DDQ, and subsequent exchange of the counter-anion by using aq. HPF₆ or aq. HBF₄. In addition, the reaction of 7a-d with 2.2 equiv. amounts of DDQ afforded carbonyl compounds 12a-d. The delocalization of the positive charge of 9a-c was evaluated by the ¹H and ¹³C NMR spectral data. The thermodynamic stability of cations 9a-c was evaluated to be in the order 9a<9b<9c on the basis of their reduction potentials measured by cyclic voltammetry (CV) and pK_R+ values (2.6-10.3) obtained spectrophotometrically. The reduction waves of cations 9a-c were irreversible, suggesting the dimerization of the radical species generated by one-electron reduction. This was demonstrated by the reduction of 9a·BF₄⁻ with Zn powder to give dimerized product 14a. In addition, the quenching of 9a·BF₄⁻ with MeOH/NaHCO₃ gives ether derivative 15a, which is proposed for the precursor for synthesizing tris(heteroazulene)-substituted methyl cations bearing two different heteroazulene-units.     

Synthesis of 2,3-disubstituted benzofurans and indoles by π-Lewis acidic transition metal-catalyzed cyclization of ortho-alkynylphenyl O,O- and N,O-acetals

The PtCl₂-catalyzed cyclization reaction of ortho-alkynylphenyl acetals 1 in the presence of COD (1,5-cyclooctadiene) produces 3-(α-alkoxyalkyl)benzofurans 2 in good to high yields. For example, the reaction of acetaldehyde ethyl 2-(1-octynyl)phenyl acetal (1a), acetaldehyde ethyl 2-(cyclohexylethynyl)phenyl acetal (1c), and acetaldehyde ethyl 2-(phenylethynyl)phenyl acetal (1f) in the presence of 2 mol % of platinum(II) chloride and 8 mol % of 1,5-cycloocatadiene in toluene at 30 °C gave the corresponding 2,3-disubstituted benzofurans 2a, 2c, and 2f in 91, 94, and 88% yields, respectively. Moreover, the reaction of N-methoxymethyl-2-alkynylanilines 3 was catalyzed by PdBr₂, affording the corresponding 2,3-disubstituted indoles 4 in moderate yields. For example, the reaction of N-methoxymethyl-2-(1-pentynyl)-N-tosylaniline (3a) and N-methoxymethyl-2-(phenylethynyl)-N-tosylaniline (3b) in the presence of 10 mol % of PdBr₂ in toluene at 80 °C gave 3-methoxymethyl-2-propyl-1-tosylindole (4a) and 3-methoxymethyl-2-phenyl-1-tosylindole (4b) in 33 and 33% yields, respectively.     

C11H12 Hydrocarbons—II : Preparation of tricyclo[5.4.0.0]undeca-3,8,10-triene a norbornenone route from cycloheptatriene

A stereoselective 6-step synthesis of the C₁₁H₁₂ hydrocarbon cis,anti,cis-tricyclo[5.4.0.0^2,5]undeca-3,8,10-triene (2a) is described. The dichloro compound 3c was prepared by the selective reduction of 3a with chromous perchlorate-ethylenediamine complex, a general reagent for this type of transformation. Irradiation of 3c produced 6a and 7a in ∼ 7:1 ratio. Reduction of the mixture with sodium produced ketal mixture 6b and 7b. The ketals were hydrolyzed to ketones 6c and 7c and the ketones decarbonylated to 2a and an isomeric hydrocarbon tentatively assigned as homobasketene 2b′. Hydrocarbon 2a was readily obtained pure by a silver nitrate extraction procedure and 2b′ by preparative VPC. It was shown that pure 6c gives only 2a and therefore, 7c is the source of 2b′. The stereochemical assignments, based on both spectral and chemical evidence, are discussed.     

Ni(II) and Cu(II) complexes of phenoxy-ketimine ligands: Synthesis,structures and their utility in bulk ring-opening polymerization (ROP) of l-lactide

Synthetic, structural and catalysis studies of Ni(II) and Cu(II) complexes of a series of phenoxy-ketimine ligands with controlled variations of sterics, namely 2-[1-(2,6-diethylphenylimino)ethyl]phenol (1a), 2-[1-(2,6-dimethylphenylimino)ethyl]phenol (1b) and 2-[1-(2-methylphenylimino)ethyl]phenol (1c), are reported. Specifically, the ligands 1a, 1b and 1c were synthesized by the TiCl₄ mediated condensation reactions of the respective anilines with o-hydroxyacetophenone in 21–23% yield. The nickel complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Ni(II) (2a) and {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Ni(II) (2b), were synthesized by the reaction of the respective ligands 1a and 1b with Ni(OAc)₂ · 4H₂O in the presence of NEt₃ as a base in 71–75% yield. The copper complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Cu(II) (3a), {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Cu(II) (3b) and {2-[1-(2-methylphenylimino)ethyl]phenoxy}₂Cu(II) (3c) were synthesized analogously by the reactions of the ligands 1a, 1b and 1c with Cu(OAc)₂ · H₂O in 70–87% yield. The molecular structures of the nickel and copper complexes 2a, 2b, 3a, 3b and 3c have been determined by X-ray diffraction studies. Structural comparisons revealed that the nickel centers in 2a and 2b are in square planar geometries while the geometry around the copper varied from being square planar in 3a and 3c to distorted square planar in 3b. The catalysis studies revealed that while the copper complexes 3a, 3b and 3c efficiently catalyze ring-opening polymerization (ROP) of l-lactide at elevated temperatures under solvent-free melt conditions, producing polylactide polymers of moderate molecular weights with narrow molecular weight distributions, the nickel counterparts 2a and 2b failed to yield the polylactide polymer.     

[4+2] Cycloaddition reactions of 4-sulfur-substituted 2-pyridones with electron-deficient dienophiles

[4+2] Cycloaddition reactions of 4-(phenylthio)-1-tosyl-2-pyridone (6a) and 4-(phenylsulfonyl)-1-tosyl-2-pyridone (6b) with electron-deficient dienophiles 7 (N-methylmaleimide, N-phenylmaleimide, and methyl acrylate) gave new isoquinuclidine products 8-10. The N-tosyl group of 6a and 6b was also efficiently converted to N-alkyl derivatives 6c-f, which showed different stereoselectivity toward reactions with dienophiles 7. Several other dienophiles 15 (dimethyl acetylenedicarboxylate, methyl vinyl ketone, ethyl vinyl ether, and methyl methacrylate) were found not to react with 6a or 6b, but led to the formation of tosyl migration products 4-(phenylthio)-O-tosyl-pyridinol (16a) and 4-(phenylsulfonyl)-O-tosyl-2-pyridinol (16b), respectively. The reactivity, regioselectivity, and stereoselectivity of the cycloaddition reactions were also compared with semi-empirical calculations.     

Carbonyl complexes of manganese, rhenium and molybdenum with 2-pyridylimino acid ligands

[MBr(CO)₃{κ²(N,O)-pyca}] [M = Mn(1a), Re(1b), pyca = pyridine-2-carboxaldehyde] and [MoCl(η³-C₃H₄Me-2)(CO)₂{κ²(N,O)-pyca}] (1c) react with aminoacid β-alanine to give the corresponding iminopyridine complexes 2a-2c. The same method affords the iminopyridine derivatives from γ-aminobutyric acid (GABA) (3a-3c) and 3-aminobenzoic acid (4a-4c). For complexes 2a-2c, 3a, 3c and 4a, the solid state structures have been determined by X-ray crystallography, revealing interesting differences in their hydrogen-bonding patterns in solid state.     

Microwave assisted synthesis of 3-aminoindole-2-carbonitriles from anthranilonitriles via N-unprotected 2-(cyanomethylamino)benzonitriles

Anthranilonitrile 3a, 4,5-dimethoxyanthranilonitrile 3b and 5-nitroanthranilonitrile 3c, react with paraformaldehyde, KCN and ZnCl₂ in acetic acid under acid catalysis (H₂SO₄) in a sealed tube at ca. 55 °C to give the corresponding 2-(cyanomethylamino)benzonitriles 4a-c in 96, 86 and 57% yields, respectively. Thorpe-Ziegler cyclisation of the N-unprotected 2-(cyanomethylamino)benzonitriles 4a-c with K₂CO₃ in EtOH at elevated temperatures and pressures using either microwave heating or conventional heating in a sealed tube gives 3-amino, 3-amino-5,6-dimethoxy, and 3-amino-5-nitroindole-2-carbonitriles 2a-c in moderate to good yields. All new compounds are fully characterised.     

Facile synthesis of 4-phenylquinolin-2(1H)-one derivatives from N-acyl-o-aminobenzophenones

An efficient synthesis of 4-phenylquinolin-2(1H)-one derivatives has been achieved in a one-pot reaction from N-acyl-o-aminobenzophenones 1a-c (a: acyl=acetyl; b: acyl=propanoyl; c: acyl=heptanoyl) using NaH as a base. Treatment of 1 with NaH provided the quinolones 2a-c with 62-83% yields, whereas the reaction in the presence of alkyl iodide (alkyl=methyl, ethyl, n-octyl) gave the corresponding N-alkylated quinolones 3a-g in 75-95% yields. The alkylation reaction of 4-phenylquinolin-2(1H)-one 2a with alkyl halide gave a mixture of N-alkylated and O-alkylated products. Comparison of IR and NMR data of the N-alkylated and O-alkylated compounds with those of 2a-c indicated that 2a-c exist as the lactam form.     

Microwave assisted synthesis of novel imidazo [2,1-b]thiazole derivative attached to quinoxalinones

3-(6-Phenylimidazo[2,1-b]thiazol-5-yl)quinoxalin-2(1H)-ones (qunoxalinone) (6a-q) have been synthesized by the reaction of ethyl 2-oxo-2-(6-phenylimidazo[2,1-b]thiazol-5-yl)acetates (4a-e) with suitably substituted o-phenylenediamines (5a-f) under microwave heating. The ethyl 2-oxo-2-(6-phenylimidazo[2,1-b]thiazol-5-yl)acetates (4a-e) were prepared by the reaction of 6-phenylimidazo[2,1-b]thiazoles (3a-e) with ethyl chlorooxoacetate in refluxing 1,4-dioxane whereas the thiazoles (3a-e) were synthesized by the reaction of 2-bromo-1-phenylethanones (2a-e) with thiazol-2-amine in refluxing acetone.     

3-Amino- and 3-acylamido-2-phosphonopyridines: synthesis by Pd-catalyzed P-C coupling, structure and conversion to pyrido[b]-anellated PC-N heterocycles

Palladium catalyzed cross-coupling of 3-amino- and 3-acylamido-2-bromopyridines 1a-f with triethyl phosphite allowed the synthesis of 3-amino- and 3-acylamido pyridine-2-phosphonic acid diethyl esters 2a-f, whereas nickel catalysts, although providing access to related anilido-2-phosphonates, proved inactive. Reduction of the aminophosphonate 2a with LiAlH₄ afforded 3-amino-2-phosphinopyridine (3a), which was cyclocondensed with dimethylformamide dimethyl acetal (DMFA) via phosphaalkene intermediates 4a to the novel pyrido[b]-anellated 1,3-azaphosphole 5a. Reaction of amidophosphonates 2b-f with LiAlH₄ did not result in the expected reductive cyclization, as shown by closely related anilido-2-phosphonates, but led to product mixtures containing N-secondary 3-amino-2-phosphinopyridines 3b-f as the main or major component. The conversion of 3b,d,e with DMFA to 5b,d,e provides first examples of N-substituted pyrido[b]-anellated azaphospholes. Structures were confirmed by multinuclear NMR and X-ray crystallography (for 2c, 3b).     

Improved approaches and structures of new ferrocenyl carbene complexes of chromium, tungsten, and molybdenum

Ferrocenyllithium reacts with M(CO)₆ (M = Cr, W, Mo) in THF to give, after alkylation at oxygen, the corresponding carbene complexes 3a-c in good yield. Complexes 3a,b were characterized by X-ray analysis. These complexes react with pentylamine to give the corresponding aminocarbene complexes 7a-c and with allylamine to give, in the case of chromium and tungsten, the corresponding and expected aminonocarbene complexes 8a,b, and for molybdenum, complex 9c in which the double bond is already coordinated to the metal. 8a,b could be converted in 9a,b in excellent yield. The structure of 9a could be confirmed by an X-ray analysis. Alkylations at nitrogen could be carried on complex 9c as well as on complexes 9a,b.     

2-(1-Isopropyl-2-benzimidazolyl)-6-(1-aryliminoethyl)pyridyl transition metal (Fe, Co, and Ni) dichlorides: Syntheses, characterizations and their catalytic behaviors toward ethylene reactivity

A series of 2-(1-isopropyl-2-benzimidazolyl)-6-(1-aryliminoethyl)pyridyl metal complexes [iron (II) (1a-6a), cobalt (II) (1b-6b) and nickel (II) (1c-6c)] were synthesized and fully characterized by elemental and spectroscopic analyses. Single-crystal X-ray diffraction analyses of five coordinated complexes 5a, 3b, 5b, 1c and 2c reveal 5a and 5b as distorted trigonal-bipyramidal geometry, and 3b, 1c and 2c as distorted square pyramidal geometry. All complexes performed ethylene reactivity with the assistance of various organoaluminums. The iron complexes displayed good activities in the presence of MAO and MMAO. Upon activated by Et₂AlCl, the cobalt analogues showed moderate ethylene reactivity, while the nickel analogues exhibited relatively higher activities.     

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y=H (1a), Me (1b), MeO (1c)) can be prepared either by direct insertion of elemental Te across C_Rf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (Y=H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCl₂ (Y=H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a-c with SO₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂TeI₂ (Y=H (4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of 1a-c with KI, or alternatively, by the oxidative addition of iodine to 2a-c. The reaction of 2a-c with allyl bromide affords the diorganotellurium dibromides 1a-c, rather than the expected triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ¹³C and ¹²⁵Te NMR spectroscopy (solution and solid-state) and in case of 1c also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.     

Synthesis of new tetracyclic 7-oxo-pyrido[3,2,1-de]acridine derivatives

A series of (±)3-hydroxyl- and 2,3-dihydroxy-2,3-dihydro-7-oxopyrido[3,2,1-de]acridines were synthesized for antitumor evaluation. These agents can be considered as analogues of glyfoline or (±)1,2-dihydroxyacronycine derivatives. The key intermediates, 3,7-dioxopyrido[3,2,1-de]acridines (15a,b or 24a,b), for constructing the target compounds were synthesized either from 3-(N,N-diphenylamino)propionic acid (14a,b) by treating with Eaton’s reagent (P₂O₅/MsOH) (Method 1) or from (9-oxo-9H-acridin-10-yl)propionic acid (23a-c) via ring cyclization under the same reaction conditions (Method 2). Compounds 15a,b and 24a,b were converted into (±)3-hydroxy derivatives (25a-d), which were then further transformed into pyrido[3,2,1-de]acridin-7-one (28a-d) by treating with methanesulfonic anhydride in pyridine via dehydration. 1,2-Dihydroxylation of 28a-d afforded (±)cis-2,3-dihydroxy-7-oxopyrido[3,2,1-de]acridine (29a-d). Derivatives of (±)3-hydroxy (25a,b) and (±)cis-2,3-dihydroxy (29a-d) were further converted into their O-acetyl congeners 26a,b and 30a-d, respectively. We also synthesized 2,3-cyclic carbonate (31, 32, and 33) from 29a-c. The anti-proliferative study revealed that these agents exhibited low cytotoxicity in inhibiting human lymphoblastic leukemia CCRF-CEM cell growth in culture.     

Salen-ligands based on a planar-chiral hydroxyferrocene moiety: Synthesis, coordination chemistry and use in asymmetric silylcyanation

Condensation of the O-protected hydroxyferrocene carbaldehyde (S_p)-1 with suitable diamines, followed by liberation of the hydroxyferrocene moiety leads to a new type of ferrocene-based salen ligands (3). While the use of ethylenediamine in the condensation reaction yields the planar-chiral ethylene-bridged ligand [(S_p,S_p)-3a], reaction with the enantiomers of trans-1,2-cyclohexylendiamine gives rise to the corresponding diastereomeric cyclohexylene-bridged systems [(S,S,S_p,S_p)-3b and (R,R,S_p,S_p)-3c], which feature a combination of a planar-chiral ferrocene unit with a centrochiral diamine backbone. Starting with the ferrocene-aldehyde derivative (R_p)-1, the enantiomeric ligand series (3d/e/f) is accessible via the same synthetic route.The (S_p)-series of these newly developed N₂O₂-type ligands was used for the construction of the corresponding mononuclear bis(isopropoxy)titanium (4a/b/c), methylaluminum (5a/b/c) and chloroaluminum-complexes (6a/b/c), which were isolated in good yields and identified by X-ray diffraction in several cases. The aluminum complexes (5/6) were successfully used in the Lewis-acid catalyzed addition of trimethylsilylcyanide to benzaldehyde, yielding the corresponding cyanohydrins in 45-62% enantiomeric excess.     

Greener fluorous chemistry: Convenient preparation of new types of ‘CF3-rich’ secondary alkyl mesylates and their use for the synthesis of azides, amines, imidazoles and imidazolium salts

2,2,2-Trifluoroethanol, 1,1,1,3,3,3-hexafluoro-2-propanol, and nonafluoro-tert-butyl alcohol were used as precursors for the preparation of the appropriate bis(polyfluoroalkoxymethyl)carbinols [(R_FHOCH₂)₂CHOH, 1a-c, R_FH = (a) CF₃CH₂, (b) (CF₃)₂CH, and (c) (CF₃)₃C] and the corresponding mesylates [(R_FHOCH₂)₂CHOSO₂CH₃, 2a-c]. This novel design paradigm is introduced to eliminate the persistence and bioaccumulation problems of fluorous chemistry, which are associated with the use of longer linear perfluoroalkyl groups (e.g. R_fn ≥ n-C₈F₁₇, n-C₇F₁₅). Secondary mesylates 2a,b and the primary tosylate [(CF₃)₃COCH₂CH₂OTs, 2d] displayed acceptable reactivity towards azide and imidazole nucleophiles to allow the syntheses of novel fluorous azides, which on hydrogenolysis with H₂/Pd-C offered fluorous amines [(R_FHOCH₂)₂CHNH₂, 8a,b], and 1-(polyfluoroalkyl)imidazoles (5a,b,d), respectively, while 2c showed no reactivity due to steric hindrance. The reaction of 8a,b with formaline, glyoxal and hydrochloric acid gave symmetrical 1,3-dialkylated imidazolium chlorides (9a,b), while 5a,b,d were effectively alkylated using n-C₈F₁₇(CH₂)₃I, methyl iodide, 2-bromoethanol, and 2d to yield the corresponding 1,3-dialkylimidazolium iodides, bromides, and tosylates (7aa-ec). Some physical properties of new compounds including mp, bp and solubility patterns were also analyzed; and the fluorophilicity values of 1a-c, and 2a-c were experimentally determined by GC and/or ¹⁹F NMR spectroscopy.