Tetraphosphine/palladium catalysed Suzuki cross-coupling reactions of aryl halides with alkylboronic acids

Through the use of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as a catalyst, a range of aryl bromides and chlorides undergoes Suzuki cross-coupling with alkylboronic acids in good yields. Several alkyl substituents such as ethyl, n-butyl, n-octyl, isobutyl or 2,2-dimethylpropyl on the alkylboronic acids have been successfully used. The functional group tolerance on the aryl halide is remarkable; substituents such as fluoro, methyl, methoxy, acetyl, formyl, benzoyl, nitro or nitrile are tolerated. Furthermore, this catalyst can be used at low loading, even for reactions of sterically hindered aryl bromides.     

Suzuki cross-coupling of solid-supported chloropyrimidines with arylboronic acids

The utility of the Suzuki cross-coupling to synthesize biaryl compounds is expanded herein to include reactions of resin-supported chloropyrimidines with boronic acids. In particular, an efficient method is described for the synthesis of a library of biaryl compounds from solid-supported chloropyrimidines. The Suzuki reaction was performed in an inert atmosphere using Pd(2)(dba)(3)/P(t-Bu)(3) as catalyst, spray-dried KF as base, and THF as solvent. The reaction was allowed to proceed overnight at 50 degrees C. Upon cleavage with acid, a library of 4-(substituted amino)-6-arylpyrimidines was obtained in moderate yield and high purity.     

Efficient construction of C–C bonds from aryl halides/aryl esters with arylboronic acids catalysed by palladium(II) thiourea complexes

A new set of palladium(II) complexes comprising phenyl(thiazolyl)thiourea ligands have been successfully synthesized and characterized with the aid of analytical as well as spectral (IR, UV–visible and NMR) methods. A distorted square‐planar geometry with N^S coordination mode of thiourea ligands in the new palladium complexes was corroborated by single‐crystal X‐ray diffraction methods. Interestingly, the palladium(II) thiourea complexes showed the highest catalytic activity with 0.1 mol% catalyst loading in Suzuki–Miyaura cross‐coupling reactions utilizing a range of aryl bromides/unactivated aryl chlorides with arylboronic acids as coupling partners in aqueous–organic media. Syntheses of diaryl ketones using aryl esters and arylboronic acids as coupling partners were also achieved with low catalyst loading within 20 h. The potential of our catalyst was demonstrated by its wide substrate scope, low catalyst loadings and high isolated yield. Moreover, the influences of key parameters like solvent, base, temperature and catalyst loading were also investigated.     

Nickel(II)-aryl complexes as catalysts for the Suzuki cross-coupling reaction of chloroarenes and arylboronic acids

A series of air- and moisture-stable Ni(II)-(σ-aryl) complexes, Ni(PPh₃)₂(aryl)X (X = Cl, Br), were employed as catalyst precursors in the Ni-catalyzed Suzuki cross-coupling reaction. These pre-catalysts easily form the catalytically active Ni(0) species in situ without the need of additional reducing agents. A general catalytic system involving Ni(PPh₃)₂(1-naph)Cl and PPh₃ proved to be highly effective for the Suzuki reaction of aryl chlorides under mild conditions (at 60 °C in THF in the presence of K₂CO₃ as the base).     

Nickel-catalyzed cross-coupling of aryl phosphates with arylboronic acids

The Suzuki-Miyaura cross-coupling of aryl phosphates using Ni(PCy(3))(2)Cl(2) as an inexpensive, bench-stable catalyst is described. Broad substrate scope and high efficiency are demonstrated by the syntheses of more than 40 biaryls and by constructing complex organic molecules. The poor reactivity of aryl phosphates relative to aryl halides is successfully employed to construct polyarenes by selective cross-coupling using Pd and Ni catalysts.     

Diaminophosphine oxides as preligands for Ni-catalyzed Suzuki cross-coupling reactions of aryl chlorides with arylboronic acids

The first investigation of air- and moisture-stable diaminophosphine oxides as preligands in the Ni-catalyzed Suzuki cross-coupling reactions of aryl chlorides with arylboronic acids has been reported. The results show that under the optimized reaction conditions, the new catalytic system with a Ni(II) σ-aryl complex as precatalyst and a diaminophosphine oxide as preligand tolerates a variety of functional groups and is efficient for both electron-rich and electron-deficient aryl chlorides, though it shows higher efficiency for activated arylboronic acids than deactivated ones. Steric effects were observed for both aryl chlorides and arylboronic acids.     

Palladium-catalyzed Suzuki cross-coupling of aryl halides with aryl boronic acids in the presence of glucosamine-based phosphines

Carbohydrate-substituted phosphines are easily obtained in quite good yields by coupling of protected or non-protected d-glucosamine with the corresponding diphenylphosphino acid. These neutral ligands, in association with palladium acetate, are very active catalysts in the Suzuki cross-coupling reaction. The polyhydroxy phosphines are more active than the peracetylated phosphines. The process tolerates electron-rich as well as electron-poor substituents. Excellent turnovers, up to 97?000 are observed.     

Pd/SiC催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应性能

以高比表面积碳化硅为载体,通过液相还原法制备出Pd/SiC催化剂,并用于催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应.利用X射线衍射、电感耦合等离子体质谱和高分辨透射电子显微镜等对催化剂进行了表征.结果表明, SiC表面的Pd纳米颗粒分散均匀,平均粒径约为2.8 nm.在优化溶剂、碱、压力和温度等反应条件后,发现以3 mmol的K2CO3和10 mL苯甲醚分别为碱和溶剂,1.0 mmol碘苯和1.5 mmol苯硼酸在3 wt% Pd/SiC催化剂存在的条件下,在CO压力为1.0 MPa和100oC下反应8 h即可实现羰化偶联,碘苯转化率为90%,二苯甲酮选择性为99%.并且, Pd/SiC对含有不同官能团的碘代芳烃和芳基硼酸羰化Suzuki偶联反应具有较好的普适性.同时, Pd/SiC也具有较好的稳定性,经5次循环反应后,碘苯转化率从90%降至76%;催化剂活性降低的主要原因是活性组分Pd在有机反应体系中的流失.     

Pd/SiC催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应性能

以高比表面积碳化硅为载体,通过液相还原法制备出Pd/SiC催化剂,并用于催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应.利用X射线衍射、电感耦合等离子体质谱和高分辨透射电子显微镜等对催化剂进行了表征.结果表明, SiC表面的Pd纳米颗粒分散均匀,平均粒径约为2.8 nm.在优化溶剂、碱、压力和温度等反应条件后,发现以3 mmol的K2CO3和10 mL苯甲醚分别为碱和溶剂,1.0 mmol碘苯和1.5 mmol苯硼酸在3 wt% Pd/SiC催化剂存在的条件下,在CO压力为1.0 MPa和100oC下反应8 h即可实现羰化偶联,碘苯转化率为90%,二苯甲酮选择性为99%.并且, Pd/SiC对含有不同官能团的碘代芳烃和芳基硼酸羰化Suzuki偶联反应具有较好的普适性.同时, Pd/SiC也具有较好的稳定性,经5次循环反应后,碘苯转化率从90%降至76%;催化剂活性降低的主要原因是活性组分Pd在有机反应体系中的流失.     

NiCl(2)(dppe)-catalyzed cross-coupling of aryl mesylates, arenesulfonates, and halides with arylboronic acids

An investigation of the NiCl(2)(dppe)-, NiCl(2)(dppb)-, NiCl(2)(dppf)-, NiCl(2)(PCy(3))(2)-, and NiCl(2)(PPh(3))(2)-catalyzed cross-coupling of the previously unreported aryl mesylates, and of aryl arenesulfonates, chlorides, bromides, and iodides containing electron-withdrawing and electron-donating substituents with aryl boronic acids, in the absence of a reducing agent, is reported. NiCl(2)(dppe) was the only catalyst that exhibited high and solvent-independent activity in the two solvents investigated, toluene and dioxane. NiCl(2)(dppe) with an excess of dppe, NiCl(2)(dppe)/dppe, was reactive in the cross-coupling of electron-poor aryl mesylates, tosylates, chlorides, bromides, and iodides. This catalyst was also efficient in the cross-coupling of aryl bromides and iodides containing electron-donating substituents. Most surprisingly, the replacement of the excess dppe from NiCl(2)(dppe)/dppe with excess PPh(3) generated NiCl(2)(dppe)/PPh(3), which was found to be reactive for the cross-coupling of both electron-rich and electron-poor aryl mesylates and chlorides. Therefore, the solvent-independent reactivity of NiCl(2)(dppe) provides an inexpensive and general nickel catalyst for the cross-coupling of aryl mesylates, tosylates, chlorides, bromides, and iodides with aryl boronic acids.     

无配体、水相中钯催化的卤代芳烃与苯硼酸的Suzuki偶联反应

溴代(碘代)芳烃与苯硼酸在以Li OH为碱、水为反应溶剂、醋酸钯为催化剂、90℃条件下反应24h后,可以较高收率得到二芳基产物。该方法具有收率好,操作方便以及催化体系便宜又简单的优点。     

Microwave-assisted, Pd(0)-catalyzed cross-coupling of diazirines with aryl halides

Pd(0)-catalyzed cross-coupling reactions of diazirines with aryl halides under microwave heating conditions afford a series of substituted olefins. A reaction mechanism involving the migratory insertion of the Pd carbene intermediate is proposed.     

Palladium catalyzed ligand-free Suzuki cross-coupling reactions of benzylic halides with aryl boronic acids under mild conditions

A highly efficient Suzuki cross-coupling reaction between benzylic halides and aryl boronic acids using palladium chloride as catalyst in acetone:water (3:1) as the solvent system has been developed. High yields of products, mild reaction conditions and short reaction times in the absence of ligand are important features of this method.     

Cross-coupling reaction of thermally stable titanium(II)-alkyne complexes with aryl halides catalysed by a nickel complex

The first cross-coupling reaction of thermally stable titanium(II)-alkyne complexes with aryl iodides in the presence of a catalytic amount of Ni(cod)2 is presented.     

Highly efficient cyclopalladated ferrocenylimine catalyst for Suzuki cross-coupling reaction of 3-pyridylboronic pinacol ester with aryl halides

The Suzuki cross-coupling reaction of 3-pyridylboronic pinacol ester with aryl iodides, bromides and chlorides was carried out in DMF/H₂O (3/1, v/v) at 110 °C in the presence of cyclopalladated ferrocenylimine I and K₂CO₃ or CsCO₃ (1.0 equiv.) without the protection of inert gas. By using this method the synthesis of 3-pyridyl biaryl compounds could be readily achieved.     

Synthesis,crystal structural study and catalyst active of benzyloxycarbonylmethyl triphenylphosphonium hexabromopalladate (II) in amination of aryl halides and Suzuki cross-coupling reaction

In this study, palladium (II) chloride reacted with the phosphonium salt [PhCH₂COOCH₂P(Ph)₃]Br to give [PhCH₂COOCH₂P(Ph)₃]₂[Pd₂Br₆] (1). The characterization of synthesized compound was performed by elemental analysis, FT-IR, ¹H, ³¹P, ¹³C NMR and also X-ray crystallography. It was found that this compound works as an efficient catalyst for the amination of aryl halides to afford primary amines, the results of which were satisfactory. Furthermore, it was found that the catalyst showed a high activity for Suzuki carbon–carbon cross-coupling of aryl halides and phenylboronic acid. Interestingly, the catalyst can be recovered from the reaction mixture and recycled four consecutive runs without any significant loss in activity.     

Ni-catalyzed cross-coupling reaction of aryl chlorides with arylboronic acids in IPA without using a reducing reagent

The coupling reaction of aryl chlorides with arylboronic acids was successfully performed in isopropanol (IPA) by using [NiCl(Ph₂PCH₂CH₂OH)₂(H₂O)]Cl (5), a cationic Ni(II)-complex, as a precatalyst in the absence of a reducing agent. The coupling reaction proceeded smoothly under mild conditions to provide biaryls in satisfactory to excellent yields, and formation of the undesired dechlorination products of aryl chlorides was completely prevented.     

Generation of substituted styrenes via Suzuki cross-coupling of aryl halides with 2,4,6-trivinylcyclotriboroxane

The synthesis of functionalized styrene derivatives can be readily achieved utilizing a Suzuki cross-coupling protocol between aryl halides and 2,4,6-trivinylcyclotriboroxane-pyridine complex. The scope and limitations of the procedure were demonstrated by investigation of an array of ortho-substituted aryl halides.     

Copper-catalyzed decarboxylative cross-coupling of alkynyl carboxylic acids with aryl halides

The copper-catalyzed decarboxylative reactions of alkynyl carboxylic acids with aryl halides were performed under relatively mild reaction conditions. Benzofurans could be further prepared smoothly by a one-pot domino protocol on the basis of decarboxylative cross-coupling of 2-iodophenol.     

Pd(DIPHOS)2-catalyzed cross-coupling reactions of organoborons with free or polymer-bound aryl halides

Bis[1,2-bis(diphenylphosphino)ethane]palladium(0) [Pd(DIPHOS)2] catalyzes cross-coupling reactions of free or polymer-bound aryl halides with organoboron compounds to produce biaryls in overall yields of 60-96%.