Formal synthesis of nitidine through palladium-catalyzed isocoumarin synthesis

The isoquinolone intermediate 9 for the synthesis of nitidine was synthesized through palladium-catalyzed formation of isocoumarin 7 from o-styrylbenzoic acid derivative 5, which was prepared from palladium-catalyzed coupling reactions of aryl iodide 1 and 2 with vinylsilane.     

Total synthesis of apoptolidin: completion of the synthesis and analogue synthesis and evaluation

The total synthesis of apoptolidin (1) is reported together with the design, synthesis, and biological evaluation of a number of analogues. The assembly of key fragments 6 and 7 to vinyl iodide 3 via dithiane coupling technology was supplemented by a second generation route to this advanced intermediate involving a Horner-Wadsworth-Emmons coupling of fragments 22 and 25. The final stages of the synthesis featured a Stille coupling between vinyl iodide 3 and vinylstannane 2, a Yamaguchi lactonization, a number of glycosidations, and final deprotection. The developed synthetic technology was applied to the construction of several analogues including 74, 75, and 77 which exhibit significant bioactivity against tumor cells.     

离子热法合成沸石咪唑骨架材料及其溶解-结晶机理研究

基于沸石咪唑骨架材料在离子液体和低共熔溶剂中冷却结晶的析出方式,开发了一种离子热法合成沸石咪唑骨架材料的新途径,采用X射线衍射、扫描电镜、核磁共振光谱、红外光谱以及热重分析等方法对制备的产物进行了表征,研究了合成条件对产物结晶度、尺寸和形貌的影响,探讨了沸石咪唑骨架材料在离子热合成体系中的溶解-结晶析出机理.研究发现,冷却速率能够影响产物形貌,急速冷却时,sod(RCSR代码)型产物的形貌为球形,zni(RCSR代码)型产物为棒状或平板状;程序控制冷却时,sod型产物的形貌为多面体,zni型产物呈团簇状.     

Total synthesis of plakortide E and biomimetic synthesis of plakortone B

The total synthesis of plakortide E (1a) is reported. A novel palladium-catalyzed approach towards 1,2-dioxolanes as well as an alternative substrate-controlled route leading exclusively to cis-highly substituted 1,2-dioxolanes have been developed. A lipase-catalyzed kinetic resolution was employed to provide optically pure 1,2-dioxolane central cores. Coupling of the central cores and side chains was achieved by a modified Negishi reaction. All four isomeric structures of plakortide E methyl ester, namely, 26a-d were synthesized. One of the structures, 26d, was shown to be identical with the natural plakortide E methyl ester on the basis of (1)H, (13)C NMR spectra and specific rotation comparisons. With the plakortide E methyl ester (4S,6R,10R)-(-)-cis-26d and its other three isomers in hand, we successfully converted them into (3S,4S,6R,10R)-plakortone B (2a), and its isomers ent-2a, 2b and ent-2b via an intramolecular oxa-Michael addition/lactonization cascade reaction. Finally, saponification converted 1,2-dioxolane 26d into plakortide E (1a) whose absolute configuration (4S,6R,10R) was confirmed by comparison of spectral and physical data with those reported.     

生物质合成气一步法合成LPG的实验研究

由生物质气化合成液体燃料(甲醇、二甲醇和低碳烃类),是理想的碳中性绿色燃料,将其用作城市交通和民用燃料,已经引起全世界的广泛关注.[1,2]     

Benzothiazines in synthesis. Toward the synthesis of pseudopteroxazole

[reaction: see text] The tricyclic benzothiazine 15 was prepared in a straightforward fashion via a completely stereoselective intramolecular Friedel-Crafts alkylation. This compound represents a potential precursor to the antitubercular agent, pseudopteroxazole. Its synthesis proceeded via a completely selective, intramolecular addition of a sulfoximine-stabilized carbanion to an alpha,beta-unsaturated ester, followed by functional group manipulations.     

Stereoselective synthesis of anamarine

A stereoselective synthesis of the naturally occurring, α,β-unsaturated lactone anamarine is described. The key step was a highly stereoselective aldol reaction of a protected erythrulose derivative with a chiral aldehyde. Another relevant step was an asymmetric aldehyde allylation with a chiral allylborane. The lactone ring was made by means of a ring-closing metathesis.     

Total synthesis of glypetelotine

A total synthesis of glypetelotine, the first sulphur-containing indole alkaloid from the leaf extracts of Glycosmis petelotii collected in the north of Vietnam, was described from indole through 6 steps. The structure of the glypetelotine was confirmed by IR, 1H NMR, 13C NMR and MS analysis. The spectral data of synthetic compound was identical with those of natural compound.     

Direct synthesis of dimethyl ether from synthesis gas over metal-pillared ilerites

The capability of metal (Cu, Zn)-pillared ilerites and metal oxide (CuO, ZnO)-impregnated metal-pillared ilerites for direct synthesis of dimethyl ether (DME) from synthesis gas was explored. The metal-pillared ilerites were synthesized and characterized by XRD, BET, ICP-AES and SEM. The reaction was carried out in a fixed bed reactor with the prepared catalysts at different temperatures (200, 250, 300°C), 20 bar and H₂/CO ratio of 2. For CuO/Zn-ilerite catalyst, CO conversion was about 62% and selectivity to DME was about 89% at 250°C.     

Total synthesis of pikromycin

The total synthesis of pikromycin (6), the first isolated macrolide antibiotic, was achieved. The target macrolide was retrosynthetically divided into two parts, pikronolide (6a) (aglycon) and D-desosamine. The aglycon was synthesized using key reactions such as an asymmetric aldol reaction, Yamaguchi esterification, and ring-closing metathesis. The aglycon was coupled successfully with the trichloroacetimidate derivative of D-desosamine under Lewis acidic conditions to afford pikromycin. Narbomycin (5) was also synthesized from narbonolide (5a) under identical conditions.     

Radical-mediated synthesis of 3,4-dihydroisocoumarins: total synthesis of hydrangenol

A radically promoted synthesis of 3,4-dihydroisocoumarins has been achieved in moderate to good yields using titanocene(III) chloride (Cp₂TiCl) as the radical initiator. The total synthesis of (±)-hydrangenol has been completed using this radical technology. Cp₂TiCl was prepared in situ from commercially available titanocene dichloride (Cp₂TiCl₂) and Zn-dust in THF under argon.     

Asymmetric total synthesis of (+)-isocryptotanshinone and formal synthesis of (−)-cryptotanshinone

The first asymmetric total synthesis of (+)-isocryptotanshinone was achieved in 12 linear steps with 12% overall yield from commercially available dihydrobenzopyrone. The key step was a base-mediated cyclization reaction. In addition, the synthetic strategy included the formal synthesis of (−)-cryptotanshinone.     

Total synthesis of mangiferaelactone

Herein we document the first total synthesis of mangiferaelactone and thus establish its absolute configuration. The central nonenolide ring was constructed using ring closing metathesis and Yamaguchi esterification. The key alcohol fragment was synthesized by the Bernet–Vasella fragmentation of C-ribofuranoside.     

Total synthesis of (+)-pederin. 2. Stereocontrolled synthesis of (+)-benzoylselenopederic acid and total synthesis of (+)-pederin

(+)-Benzoylselenopederic acid (1), a left half of (+)-pederin (3), was synthesized stereoselectively based on the Zn(BH₄)₂ reduction and total synthesis of (+)-pederin (3) was accomplished from 1 and the previously synthesized 2.     

Asymmetric synthesis of (+)-1-epiaustraline and attempted synthesis of australine

A diastereoselective synthesis of the pyrrolizidine alkaloid, (+)-1-epiaustraline has been achieved via a diastereoselective syn-dihydroxylation of a pyrrolo[1,2-c]oxazol-3-one precursor that was readily prepared by a RCM reaction. Attempts to extend this methodology to the synthesis of australine were not successful since the final pyrrolidine ring closure to produce the desired pyrrolizidine of the target molecule was not productive.     

Total synthesis of gambierol

The convergent total synthesis of gambierol (1) is described. The octacyclic ether framework of 1 was constructed via the intramolecular allylation of alpha-chloroacetoxy ether followed by ring-closing metathesis. A modified Stille coupling was successfully applied to the synthesis of the triene side chain.     

Concise synthesis of dl-febrifugine

Racemic compound (1) of the antimalarial agents febrifugine (d-1) was synthesized using an stereoselective Michael reaction of an omega-amidoenone (5) which was prepared by the Wittig reaction of piperidinediol (7).     

A synthesis of camptothecin

A total synthesis of camptothecin has been carried out. Central to our synthesis is the intramolecular condensation of a suitably designed ketol, which in turn was obtained from a tricyclic ABC ring synthon. A tandem reductive amination and Michael addition sequence on an unsaturated quinoline ester was employed for the assembly of the ABC skeleton.     

Diastereoselective synthesis of cyclosaligenyl-nucleosyl-phosphotriesters

A diastereoselective synthesis of cycloSal-phosphotriesters (cycloSal=cycloSaligenyl) based on chiral auxiliaries has been developed that allows the synthesis of single diastereomers of the cycloSal-pronucleotides. In previously described synthesis routes, the cycloSal-compounds were always obtained as 1:1 diastereomeric mixtures that could be separated in only rare cases. However, it was shown that the diastereomers have different antiviral activity, toxicity, and hydrolysis stabilities. Here, first a chiral thiazoline derivative was used to prepare nonsubstituted and 5-methyl-cycloSal-phosphotriesters in 48 and ≥95% de (de=diastereomeric excess). However, this approach failed to give the important group of 3-substituted cycloSal-nucleotides. Therefore, two other chiral groups were discovered that allowed the synthesis of (R(P))- and (S(P))-3-methyl-cycloSal-phosphotriesters as well. The antiviral activity was found to be five- to 20-fold different between the two individual diastereomers, which proved the importance of this approach.     

Enzymatic synthesis of monolaurin

The aim of this study was to produce monolaurin utilizing a commercial immobilized lipase (Lipozyme IM-20; Novo Nordisk, Bagsvaerd, Denmark) through the direct esterification of lauric acid and glycerol in a solvent-free system. The influence of fatty acid/glycerol molar ratio, temperature, and Lipozyme (IM-20) concentration on the molar fraction of monolaurin were determined using an experimental design. The best conditions employed were 55°C, lauric acid/glycerol molar ratio of 1.0, and 3.0% (w/w) enzyme concentration. The final product, obtained after 6 h of reaction, was 45.5% monolaurin, 26.8% dilaurin, 3.1% trilaurin, and 24.6% lauric acid. The reusability of the enzyme was also studied.