Multiple hydrogen-bond-induced supramolecular nanostructure from a pincer-like molecule and a [60]fullerene derivative

A new supramolecular self-assembled system between a perylene bisimide bearing diaminopyridine-substituted isophthalamide groups (PP) and a [60]fullerene containing barbituric acid moiety (C₆₀bar) through a complementary six-point hydrogen-bonding interaction was constructed. The formation of hydrogen bonding was confirmed by ¹H NMR spectra studies in CDCl₃. Fluorescence quenching experiments indicated that the fluorescence of PP was greatly quenched by the hydrogen-bonded C₆₀bar (K_sv=2.71×10⁴ M⁻¹). A steady and rapid cathodic 0.15 μA cm⁻² photocurrent response of the PP/C₆₀bar film deposited onto an ITO electrode was produced under the irradiation of 20 mW cm⁻² white light, indicating the presence of photo-induced electron transfer between PP and C₆₀bar. TEM images showed that spherical particles were fabricated by the self-assembly of PP and C₆₀bar through hydrogen-bonding interaction.     

Fluoride-induced intermolecular excimer formation of bispyrenyl thioureas linked by polyethylene glycol chains

New bispyrenyl thioureas linked by polyethylene glycol (PEG) chains, L1-L3, and methoxy benzene pyrene thiourea, L4, were synthesized. Upon binding with F⁻ in CHCl₃, L1-L3 exhibited strong excimer emission bands (I_E) and weak monomer emission bands (I_M), while L4 displayed the same intensity of both bands. However, little or no change was observed in fluorescence spectra of L1 upon adding OH⁻, AcO⁻, BzO⁻, H₂PO₄⁻, Cl⁻, Br⁻, and I⁻. Therefore, only F⁻ induced the pyrene excimer formation. Job’s plots showed 1/1 or 2/2 complexation of L1 with F⁻. Ratios of I_E/I_M of L1·F⁻ complex were dependent on the concentration of L1, implying that the dimerization of L1 proceeded via the intermolecular excimer formation. Among L1-L4, L1 possessed the highest binding constant and sensitivity toward F⁻ implying the importance of the linking PEG chain. L1 was demonstrated to be an excellent probe for F⁻ in CHCl₃ with the detection limit as low as 46.2 μg/L.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Synthesis of dinitrosyl iron complexes (DNICs) with intramolecular hydrogen bonding

HSCH₂CONHCH₃ and HSCH₂CON(CH₃)₂ containing a peptide bond are prepared for the synthesis of DNICs with/without intra-molecular hydrogen bonding, respectively. The IR ν(NO) bands of [(NO)₂Fe(SCH₂CONHCH₃)₂]⁻ (2) appears at 1751, 1700 cm⁻¹. In complex 2, the presence of intramolecular [NH?S] hydrogen bonding was verified by the observation of IR spectroscopy with N−H stretching frequency 3334 cm⁻¹ (CDCl₃) and subsequently confirmed by single-crystal X-ray diffraction showing N−S distance of 2.94 Å. Complex 2 displays the rhombic EPR spectrum with g₁ = 2.039, g₂ = 2.031 and g₃ = 2.013 at in frozen H₂O. Complexes 2 and 3 rapidly release NO when exposed to light. The time needed for photolysis reactions of 2 is two times faster than that of 3 in less polar solvent. Representative time courses for the photolability of 2 and 3 in THF display the NO-off ability: 2 > 3.     

Control of molecular weight distribution in polycondensation polymers 2. Poly(ether ketone) synthesis

Synthesis of aromatic poly(ether ketone) (3) with a narrow molecular weight distribution (M_w/M_n) was investigated via polycondensation. M_ns of 3 could be controlled varying the feed ratio of monomer (1) and initiator (2) maintaining relatively narrow M_w/M_ns (<1.3). The kinetics of polycondensation obeyed a first-order relationship between polycondensation time and -(1/[2]₀) ln([1]/[1]₀), and the rate of polycondensation was estimated as 2.57 mol⁻¹ L h⁻¹. MALDI-TOF mass analysis of 3 indicated that polycondensation should proceed via chain growth manner to give 3 having an initiator unit in each chain end.     

Synthesis and dynamics of atropisomeric (S)-N-(α-phenylethyl)benzamides

The synthesis of atropisomeric 2-substituted benzamides 2a-e, 3a-e, and 4a-e, and characterization by X-ray structure analysis of 2d, 2e, 3c, 3e, 4c, and 4e are reported. Dynamic ¹H NMR spectroscopic studies of benzamides 2b-d, 3b-d, and 4b-d indicate that only two of the four possible rotamers are present in solution, with population ratios ranging between 1.5:1 and 4.1:1. The measured free energy of activation to interconversion of the rotamers ranged from 12.4 to 18.9 kcal mol⁻¹. Benzamides ArCON[(S)-phenethyl]₂ (2e, 3e, and 4e), exhibited atropisomer ratios between 1.7:1 and 1:1, and free energies of interconversion of the rotamers ranged from 11.5 to 17.6 kcal mol⁻¹. The highest rotation barriers were observed for the ortho-nitro derivatives 2a-e. Molecular calculations at the semiempirical level (PM3MM) gave free energies of activation for benzamides 2e and 3e of 23.6 and 12.4 kcal mol⁻¹, respectively, which are comparable to the experimental values.     

Chemical and electrochemical oxidation and reduction of dithizone

A non-aqueous electrochemical study of dithizone, H₂Dz, 1, is compared with the chemical oxidation and reduction profile of this versatile ligand. Chemical oxidation of 1 by I₂ initially leads to an isolatable disulfide-bridged species, (HDz)₂, 2₂, but ultimately monomeric dehydrodithizone, Dz, 3, is formed. Electrochemically, in CH₂Cl₂/0.1 mol dm⁻³ [N(ⁿBu)₄][B(C₆F₅)₄], two oxidation processes are observed for 1. Evidence of the electrochemical formation of the dimer 2₂ was found, but on a CV timescale the fully oxidized species, 2_2oxidized, did not convert to the chemically stable species 3. Regeneration of 1 during an irreversible electrochemical reduction of the electrochemically generated fully oxidized species, 2_2oxidized, was detected. Two further one-electron electrochemical irreversible reduction steps were also identified to ultimately generate H₃Dz⁻, 8, one of the synthetic precursors to 1. In contrast, resolution and identification of the electron transfer steps of 1 in both dimethylsulfoxide, DMSO, or in CH₂Cl₂/0.1 mol dm⁻³ [N(ⁿBu)₄][PF₆] were hampered by solvation and ion paring of [PF₆]⁻ especially with the oxidized species of 1. A metathesis of water-soluble potassium dithizonate, KHDz, 4b, led to lipophilic [N(ⁿBu)₄][HDz], 4c.     

Dinuclear copper(II) perchlorate complexes with 6-(benzylamino)purine derivatives: Synthesis,X-ray structure,magnetism and antiradical activity

The reactions of Cu(ClO₄)₂·6H₂O with 6-(benzylamino)purine derivatives in a stoichiometric 1:2 metal-to-ligand ratio led to the formation of penta-coordinated dinuclear complexes of the formula [Cu₂(μ-L^1–8)₄(ClO₄)₂](ClO₄)₂·nsolv, where L¹ = 6-(2-fluorobenzylamino)purine (complex 1), L² = 6-(3-fluorobenzylamino)purine (2), L³ = 6-(4-fluorobenzylamino)purine (3), L⁴ = 6-(2-chlorobenzylamino)purine (4), L⁵ = 6-(3-chlorobenzylamino)purine (5), L⁶ = 6-(4-chlorobenzylamino)purine (6), L⁷ = 6-(3-methoxybenzylamino)purine (7) and L⁸ = 6-(4-methoxybenzylamino)purine (8); n = 0–4 and solv = H₂O, EtOH or MeOH. All the complexes have been fully characterized by elemental analysis, FTIR, UV–Vis and EPR spectroscopy, and by magnetic and conductivity measurements. Variable temperature (80–300 K) magnetic susceptibility data of 1–8 showed the presence of a strong antiferromagnetic exchange interaction between two Cu(II) (S = 1/2) atoms with J ranging from −150.0(1) to −160.3(2) cm⁻¹. The compound 6·4EtOH·H₂O was structurally characterized by single crystal X-ray analysis. The Cu?Cu separation has been found to be 2.9092(8) Å. The antiradical activity of the prepared compounds was tested by in vitro SOD-mimic assay with IC₅₀ in the range 8.67–41.45 μM. The results of an in vivo antidiabetic activity assay were inconclusive and the glycaemia in pre-treated animals did not differ significantly from the positive control.     

1-D Polymeric divalent metal m-ferrocenylbenzoates: Structures, NLO and electrochemical properties

Three 1-D metal-organic polymers containing m-ferrocenylbenzoate components: {[Pb(μ₂-η²-OOCH₄C₆Fc)₂] · (CH₃OH)₂}_n (1), [Zn(OOCH₄C₆Fc)₂(bpe)]_n (2) and [Mn(η²-OOCH₄C₆Fc)₂(4,4′-bpy)]_n (3) were synthesized and structurally characterized. In polymer 1, each m-FcC₆H₄COO⁻ anion adopts a tridentate fashion, bridging the central Pb(II) ions to form a 1-D chain. Polymers 2 and 3 give similar zigzag chain structures. Their third-order NLO properties were investigated with 532 nm laser pulses of 8 ns duration by Z-scan experiment in DMF solution. All of the polymers exhibit good NLO refractive properties with self-focusing behaviors. The third-order NLO refractive indexes n₂ are 2.44 × 10⁻¹¹ esu for 1, 2.33 × 10⁻¹¹ esu for 2, and 2.10 × 10⁻¹¹ esu for 3, respectively. Through quantum chemistry calculations, we conclude that the nonlinear refractive behaviors of the three polymers mainly come of the ferrocenyl units and organic adjuvant ligands; Mn(II) ions and Pb(II) ions have also some influence on NLO properties. The solution-state differential pulse voltammetrys indicate that the half-wave potential of the ferrocenyl moiety in 3 has slightly higher value than those of 1 and 2. This may be because the HOMO orbitals in 1 and 2 are located in the m-FcC₆H₄COO⁻ groups, while in 3 the HOMO orbital is located in the m-FcC₆H₄COO⁻ and Mn(II)groups, the charge transitions of the metal cores may play an important role in the change of the Fe(II)/Fe(III) oxidation potential of 3, so the Fe(II) centers of 1 and 2 are more easily oxidized to Fe(III) centers than that of 3.     

Dependence of the product on the P–P ligand in reactions of [RuCl3(NO)(P–P)] complexes (P–P = aromatic diphosphines) with 2-mercaptopyridine

This study presents the syntheses and characterization of 2-mercaptopyridine (pyS⁻) complexes containing ruthenium(II) with the following general formula [Ru(pyS)₂(P–P)], P–P = (c-dppen) = cis-1,2-bis(diphenylphosphino)ethylene) (1); (dppe) = 1,2-bis(diphenylphosphino)ethane (2); (dppp) = 1,3-bis(diphenylphosphino)propane (3) and (dppb) = 1,4-bis(diphenylphosphino)butane (4). The complexes were synthesized from the mer- or fac-[RuCl₃(NO)(P–P)] precursors in the presence of triethylamine in methanol solution with dependence of the product on the P–P ligand. The reaction of pyS⁻ with a ruthenium complex containing a bulky aromatic diphosphine dppb disclosed a major product with a dangling coordinated dppbO-P, the [Ru(pyS)₂(NO)(η¹-dppbO-P)]PF₆(5). In addition, this work also presents and discusses the spectroscopic and electrochemical behavior of 1–5, and report the X-ray structures for 1 and 5.     

Synthesis,structure, and electrochemistry of pyridinecarboxamide cobalt(III) complexes; the effect of bridge substituents on the redox properties

Two series of complexes of the types trans-[Co^III(Mebpb)(amine)₂]ClO₄ {Mebpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-methylbenzene dianion, and amine = pyrrolidine (prldn) (1a), piperidine (pprdn) (2a), morpholine (mrpln) (3a), benzylamine (bzlan) (4a)}, and trans-[Co^III(cbpb)(amine)₂]X {cbpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-chlorobenzene dianion, and amine = pyrrolidine (prldn), X = PF₆ (1b), piperidine (pprdn), X = PF₆ (2b), morpholine (mrpln), X = ClO₄ (3b), benzylamine (bzlan), X = PF₆ (4b)} have been synthesized and characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structure of 1a has been determined by X-ray diffraction. The electrochemical behavior of these complexes, with the goal of evaluating the effect of axial ligation and equatorial substitution on the redox properties, is also reported. The reduction potential of Co^III, ranging from −0.53 V for (1a) to −0.31 V for (3a) and from −0.48 V for (1b) to −0.22 V for (3b) show a relatively good correlation with the σ-donor ability of the axial ligands. The methyl and chloro substituents of the equatorial ligand have a considerable effect on the redox potentials of the central cobalt ion and the ligand-centered redox processes.     

Novel photo-induced oxidative cyclization of 1,3-dimethyl-5-(1-arylmethylidene)pyrimidine-2,4,6(1,3,5H)-triones: synthesis and properties of areno[5,6]pyrano[2,3-d]pyrimidine-2,4(1,3H)-dionylium ions and their photo-induced autorecycling oxidizing reaction toward some amines

Novel photo-induced oxidative cyclization was accomplished to synthesize areno[b]pyrimido[5,4-e]pyran-2,4(1,3H)-dionylium ions 13a-c⁺·ClO₄⁻. Furthermore, 13a-c⁺·BF₄⁻ and their phenyl-substituted derivatives 19a,b⁺·BF₄⁻ were alternatively synthesized by the reaction of salicylaldehyde and its naphthyl derivatives with barbituric acids and subsequent treatment with aq. HBF₄. Structural characteristics of 13a-c⁺ and 19a,b⁺ were clarified on inspection of the UV-vis and NMR spectral data as well as X-ray crystal analyses. The electrochemical properties were studied by the CV measurement. In a search for reactivity, reactions of 13a-c⁺·BF₄⁻ with some nucleophiles, hydride, benzylamine, and H₂O, were also carried out. The photo-induced autorecycling oxidation reactions of 13a-c⁺·BF₄⁻ toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) in 643-3600% yield (recycling number of 13a-c⁺·BF₄⁻: 6.4-36.0).     

Determination of carbaryl and carbofuran in fruits and tap water by β-cyclodextrin enhanced fluorimetric method

The effect of β-cyclodextrin (CD) and hydroxypropyl-β-cyclodextrin (HPCD) in water solutions on the UV-Vis and fluorescence spectra of carbaryl (1-naphthyl-N-methylcarbamate, CY) and carbofuran (2,2-dimethyl,2-3-dihydro-7-benzofuranyl-N-methylcarbamate, CF) was investigated. Host-guest interactions were observed by UV-Vis and spectrofluorimetry and the association constants for the 1:1 complexes (K_A, mol⁻¹ dm³) with CD and HPCD were determined. The values obtained were 190±10 and 123±7 mol⁻¹ dm³ for CF and 350±50 and 644±53 mol⁻¹ dm³ for CY, respectively. The values of the fluorescence quantum yield ratios (φ_complexed/φ_free) were 1.24±0.01 with CD and 1.310±0.007 with HPCD for CY, but much higher for CF being 7.0±0.1 with CD and 9.3±0.4 with HPCD. The limits of detection (LOD) for the fluorimetric determination under the better conditions were 14.5 ng cm⁻³ for the complex CF:CD and 1.94 ng cm⁻³ for the complex CY:CD in water, with notable improvement specially in the case of CF. We observed higher analytical sensitivity with the cyclodextrins (CDs) in presence of alcohols but not better LOD. The method is rapid, simple, direct and sensitive and the recovery of CY and CF was found to be between 100 and 112% in fruits and 97 and 109% in tap water. The allowed level of carbamates in banana can be detected by the proposed method.     

Synthesis, structure and dynamic stereochemistry of (O → Si)-chelate N-(trifluorosilylmethyl)-[N-(S)-(1-phenylethyl)]acetamide and 1-(trifluorosilylmethyl)-2-oxoperhydroazepine: Retention of the O → Si coordination in the adduct with KF and 18-crown-6

The novel compounds, N-(trifluorosilylmethyl)-[N-(S)-(1-phenylethyl)]-acetamide (1a) and 1-(trifluorosilylmethyl)-2-oxoperhydroazepine (1b) have been prepared from the corresponding NH-compounds using ClCH₂SiCl₃/Et₃N or ClCH₂SiCl₃/(Me₃Si)₂NH followed by methanolysis or hydrolysis of the reaction mixture in the presence of Lewis bases, and then BF₃ etherate. Potassium-(18-crown-6)-(2-oxoperhydroazepinomethyl)tetrafluorosilicate (2) was synthesized by reaction of the trifluoride (1b) with KF in the presence of 18-crown-6. Using ¹⁹F, ²⁹Si NMR and X-ray diffraction techniques it was established that the silicon atom is pentacoordinate in the trifluorides (1a, b) and hexacoordinate in the adduct 2. Thus the internal coordination of the O → Si bond present in the trifluoride (1b) is retained in the adduct 2.The stereochemical non-rigidity of the trifluorides (1a, b) and the N-(trifluorosilylmethyl)-N-methylacetamide (1c) was investigated using dynamic ¹⁹F NMR spectroscopy. The activation barriers for permutational isomerization are in the range 9.5-10 kcal mol⁻¹. Lower values of ΔG^# for permutation of trifluorides (1a-c) compared to the monofluorides with the coordination core OSiC₃F together with small negative values for the activation entropy implies a non-dissociative mechanism. Quantum-chemical analysis suggests a mechanism involving a turnstile rotation.     

New divalent manganese complex with pyridine carboxylate N-oxide ligand: Synthesis, structure and magnetic properties

Two new manganese complexes, [Mn₃(L¹)₄(NO₃)₂]_n (1, HL¹=nicotinate N-oxide acid) and [MnL²Cl]_n (2, HL²=isonicotinate N-oxide acid)], have been hydrothermally synthesized and characterized by elemental analysis, IR and single-crystal X-ray diffraction. In 1, the L¹ ligands take two different coordinated modes bridging four and three Mn^II ions. The nitrate anions take chelating coordination modes, leading one type of the Mn^II ions as a 4-connected node. The whole net can be viewed as a 3, 4, 6-connected 4-nodal net with Schläfli notation {4³}2{4⁴; 6²}4{4⁶; 6⁶; 8³}. Complex 2 has a honeycomb layer mixed bridged by chlorine, N-oxide and carboxylate. The adjacent layers are linked by the phenyl ring of L² ligand, giving a 3D framework with a {3⁴; 5⁴} {3²;4;5⁶;6⁶} 4, 6-connect net. Magnetic studies indicate that 1 is an antiferromagnet with low-dimensional characteristic, in which a -J₁J₁J₂- coupled alternating chain is predigested. Fitting the data of 1 gives the best parameters J₁=−2.77, J₂=−0.67 cm⁻¹. The magnetic properties of complex 2 represent the character of the 2D honeycomb layer with the J₁=−2.05 and J₂=0.55 cm⁻¹, which results in a whole antiferromagnetic state.     

Synthesis of bitetrathiafulvalenes with FeCl3-mediated homo-coupling of tetrathiafulvalenylmagnesium bromide and formation of nanostructures from bitetrathiafulvalenes having long alkylthio chains

The FeCl₃-mediated homo-coupling of 4,5-bis(alkylthio)-4′-tetrathiafulvalenylmagnesium bromide 5 produced the corresponding bitetrathiafulvalene derivatives 2a-d in moderate yields (25-51%). Bitetrathiafulvalenes 2c and 2d having long alkylthio chains formed nanostructures and showed bulk electric conductivities (σ_rt = 2.6 − 8.0 × 10⁻⁵ S cm⁻¹) in the neutral state owing to the fastener effect. Interestingly, the nanofiber of tetrakis(dodecylthio)bitetrathiafulvalene 2d exhibited a p-type semiconductivity as detected by AFM.     

Inner-assembly singlet energy transfer in naphthalene-anthracene system linked by 2-ureido-4{1H}-pyrimidinone binding module

Naphthalene-naphthalene, anthracene-anthracene, and naphthalene-anthracene assemblies 1.1, 2.2, and 1.2 linked by 2-ureido-4{1H}-pyrimidinone binding module were synthesized. Fluorescence quenching and lifetime measurements demonstrate that the inner-assembly singlet energy transfer from naphthalene to anthracene in 1.2 occurs with the efficiency of ca. 89% and rate constant of ca. 9.8 × 10⁸ s⁻¹. Föster energy transfer mechanism operates in this energy transfer process.     

Synthesis of novel terdentate N,C,N′-coordinated butyltin(IV) complexes and their redistribution reactions with SnCl4

The Sn(IV) butyl complexes [Bu_nSnCl_3 − n(NCN)] (NCN = [C₆H₃(CH₂NMe₂)₂-2,6]⁻, n = 1 (1), 2 (2), 3 (3)) were prepared. Spectroscopic analysis of 1-3 by ¹H and ¹¹⁹Sn NMR gave evidence for the presence of intramolecular N → Sn interactions in solution. The molecular structure of 1, as determined by a single-crystal X-ray diffraction study, revealed that it contained a six-coordinate Sn(IV) center with intramolecular N → Sn coordination of both ortho-amine substituents. Addition of SnCl₄ to 1 resulted in the isolation of the HCl adduct [BuSnCl₃(NCN⁺H)] (6). Reactions of 2 and 3 with SnCl₄ each resulted in the HCl salt [SnCl₄(NCN⁺H)] (8) and the corresponding butyltin chloride, Bu₂SnCl₂ and Bu₃SnCl, respectively. The formation of HCl adducts 6 and 8 was ascribed to transfer of the NCN ligand to SnCl₄ and the presence of HCl (from partial hydrolysis of the product or SnCl₄ during the work up procedure). The molecular structures of 6 and 8 have been determined through single-crystal X-ray diffraction and revealed the presence of a [BuSnCl₃(aryl)]⁻ or [SnCl₄(aryl)]⁻ stannate anion, respectively, with in each case one coordinated ortho-amine function and one protonated amine moiety involved in N-H?Cl-Sn hydrogen bonding in both compounds (2.14 Å for 6 and 2.18 Å for 8).     

Solvatochromism, hyperpolarizability, molecular and crystal structure of betaine dye 4-(2,4,6-triphenylpyridinium-1-yl)-phenolate

Solvatochromic effect of 4-(2,4,6-triphenylpyridinium-1-yl)-phenolate hydrate, 1, was determined. CT absorption band, which gave the shift from 23,880 (in water solution) to 14,440 cm⁻¹ (in anisole solution) allowed the molecular second order polarizability β_CT to be estimated as 59.5×10⁻³⁰ cm⁵ esu⁻¹. The crystal structure of 1 was determined: C₂₉H₂₁NO·5.78H₂O; orthorhombic, C222₁, a=15.005(9), b=24.356(4), c=7.5097(9) Å; V=2744.5(17) Å³, Z=4, D_X=1.224 g cm⁻¹; λ=0.71073 Å (Mo Kα); μ=0.087 mm⁻¹; final R₁=0.0551 for 2882 reflections [I>2σ(I)]. The molecules of 1, in an anti-parallel arrangement, form columns along the c-axis through stacking between the pyridinium ring and a phenyl ring in para position of the neighbouring molecule. Water molecules filling channels between the columns are disordered. Two of water molecules are connected by hydrogen bonds with negatively charged oxygen atom of 1. Powdered samples of 1 revealed only weak SHG response as measured using HRS method in relation to urea standard.     

New 3d–4f supramolecular systems constructed by [Fe(bipy)(CN)4] and partially blocked lanthanide cations

The reaction of acetonitrile (1–5) and mixed acetonitrile/water 1:1 (6–9) solutions containing the cyanide-bearing [Fe(bipy)(CN)₄]⁻ building block (bipy = 2,2′-bipyridine) and the partially blocked [Ln(bpym)]³⁺ cation (Ln = lanthanide trivalent cation and bpym = 2,2′-bipyrimidine) has afforded two new families of 3d–4f supramolecular assemblies of formula [Ln(bpym)(NO₃)₂(H₂O)₃][Fe(bipy)(CN)₄] · H₂O · CH₃CN [Ln = Sm (1), Gd (2), Tb (3), Dy (4) and Ho (5)] and [Ln(bpym)(NO₃)₂(H₂O)₄][Fe(bipy)(CN)₄] [Ln = Pr (6), Nd (7), Sm (8), Gd (9)]. They crystallize in the P2₁/c (1–5) and P2/c (6–9) space groups and their structures are made up of [Fe(bipy)(CN)₄]⁻ anions (1–9) and [Ln(bpym)(NO₃)₂(H₂O)_n]⁺ cations [n = 3 (1–5) and 4 (6–9)] with uncoordinated water and acetonitrile molecules (1–5) which are interlinked through an extensive network of hydrogen bonds and π–π stacking into three-dimensional motifs. Both families have in common the occurrence of the low-spin iron(III) unit [Fe(bipy)(CN)₄]⁻ where two bipy–nitrogen and four cyanide–carbon atoms build a somewhat distorted octahedral surrounding around the iron atom [Fe–N = 1.980(3)–1.988(3) Å (1–5) and 1.988(2)–1.992(2) Å (6–9); Fe–C = 1.904(5)–1.952(4) Å (1–5) and 1.911(2)–1.948(3) Å (6–9)]. The main structural difference between both families concerns the environment of the lanthanide atom which is nine- (1–5)/10-coordinated (6–9) with a chelating bpym, two bidentate nitrate and three (1–5)/four (6–9) water molecules building distorted monocapped (1–5)/bicapped (6–9) square antiprisms. This different lanthanide environment is at the origin of the different hydrogen bonding pattern of the two families of compounds.