2 + 4] and [4 + 2] cycloadditions of o-thioquinones with 1,3-dienes: a computational study

Cycloadditions of o-thioquinones (o-TQs) with 1,3-dienes could proceed via either a [2 + 4] or a [4 + 2] mechanism. Under kinetic control and with acyclic dienes the reaction affords the spiro cycloadducts 5deriving from the [2 + 4] path as the main products. Under thermodynamic control, or with cyclic dienes, the o-TQs behave as heterodienes to give the benzoxathiin derivatives 4, in most cases with complete regioselectivity. In the present computational study, DFT calculations were performed in order to achieve a deep understanding of both [2 + 4] and [4 + 2] paths. The reactions of three o-TQs with six 1,3-dienes were thoroughly investigated at the B3LYP/TZVP//B3LYP6-31G level, and the two reaction mechanisms were then compared, evidencing that [2 + 4] cycloadditions are kinetically favored, strongly asynchronous, or even unconcerted, while [4 + 2] reactions are thermodynamically favored, quite asynchronous, but undoubtedly concerted. Moreover, the observed regioselectivity was rationalized by mean of the FMO theory and by comparison of the activation energies for different pathways.     

Synthesis of novel electron-deficient chromone-fused dienes via phosphine catalyzed [4+2] annulation

α-Chromonyl ketoesters undergo phosphine catalyzed [4+2]-annulation reactions with acetylene carboxylates to yield tricyclic benzopyrones in good yields. Under mild acidic conditions, the tricyclic benzopyrones rearrange to provide highly substituted and electron-poor chromone-fused dienes in good yields.     

Catalytic enantioselective [2 + 4] and [2 + 2] cycloaddition reactions with propiolamides

We report here the catalytic and highly enantioselective [2 + 4] and [2 + 2] cycloaddition reactions of electron-rich dienes or silyl enol ethers with electron-deficient propiolamide derivatives induced by copper(II).3-(2-naphthyl)-L-alanine amide complex.     

(R)-4-phenyloxazolidin-2-thione: an efficient chiral auxiliary for [4+2] cycloaddition of 1-aminodiene and activated phosphonodienophiles

A theoretical model for the facial selectivity of N-dienyl oxazolidin-2-(thi)one and thiazolidin-2-thione 2a-c is presented. Our analysis provides a clear understanding of factors controlling stereoselectivity in reaction of these dienes, and allows predictions of high diastereoselectivity in the case of oxazolidin-2-thionyl diene (2b). The application of this diene to the synthesis of β- and γ-aminophosphonic derivatives is then investigated. Under classical conditions or under microwave activation, the D-A reaction of diene 2b leads to aminophosphonic chirons with high regio- and stereoselectivities.     

Stereoselective [4+2]-Cycloaddition with Chiral Alkenylboranes

A method for the stereoselective [4+2]-cycloaddition of alkenylboranes and dienes is presented. This transformation was accomplished through the introduction of a new strategy that involves the use of chiral N-protonated alkenyl oxazaborolidines as dieneophiles. The reaction leads to the formation of products that can be readily derivatized to more complex structural motifs through stereospecific transformations of the C−B bond such as oxidation and homologation. Detailed computation evaluation of the reaction has uncovered a surprising role of the counterion on stereoselectivity.     

[4+2]cycloaddition reactions of triarylphosphaalkene

Cycloaddition reactions of mesityl(diphenyliiifithylene)phosphine ($\text{1}$) were Investigated. With several dienes, no Diels-Alder reactions were oEserved. With azides, diphenyidiazomethane and 2,4,6-trimethylbenzonitrile oxide, the corresponding cycloadducts ($\text{4}$$\text{12}$$\text{17}$$\text{12}$were obtained. In the case of phenyl azide, a competing Staudinger reaction occurred leading to $\text{3}$.     

[4 + 2] Cycloaddition reactions of hexachlorotropone

The cycloaddition of hexachlorotropone to selected olefins, including 1,3-dienes, has been examined. Unlike tropone, which undergoes [6 + 4] cycloadditions with 1,3-dienes, only [4 + 2] processes were observed with hexachlorotropone. Its apparent preference for exo-addition (contrast tetrachlorocyclopentadienone) probably results from thermodynamic control of the endo : exo product ratios.     

An efficient [4 + 2 + 1] entry to seven-membered rings

A new nickel-catalyzed procedure for the [4 + 2 + 1] cycloaddition of trimethylsilyl diazomethane with alkynes tethered to dienes has been developed. A broad range of unsaturated substrates participate in the sequence, and stereoselectivities are generally excellent. Three possible mechanisms are proposed, and each involves the generation of a transient nickel carbene species.     

Reactivity of allenoates toward aziridines: [3+2] and formal [3+2] cycloadditions

The reactivity of buta-2,3-dienoates toward aziridines is reported. Allenoates react as 2π-component in the [3+2] cycloaddition with the azomethine ylide generated from cis-1-benzyl-2-benzoyl-3-phenylaziridine affording 4-methylenepyrrolidines in a site-, regio-, and stereoselective fashion. Under conventional thermolysis, cis- and trans-2-benzoyl-1-cyclohexyl-3-phenylaziridines showed a different reactivity. These aziridines participate in formal [3+2] cycloadditions with allenes via C-N bond cleavage of the three-membered ring leading to functionalized pyrroles.     

DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

The functionalisation of C₆₀ fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C₆₀ with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C₆₀ via [4+2] and [2+2] cycloadditions bearing reaction energies of ?15.9 kcal mol^?1 and ?72.4 kcal mol^?1, respectively. The HOMO-LUMO energy gap and work function of C₆₀ are significantly reduced following completion of the reactions. The field electron emission current of the C₆₀ surface will increase after functionalisation of either the I or II molecule.     

Nickel-catalyzed [4+2] cycloaddition for highly substituted arenes

Nickel(0) catalyzed [4+2] cycloaddition of electron-deficient dienes to alkynes and subsequent aromatization gave highly substituted arenes. This formal inverse electron-demand Diels-Alder cycloaddition is attributed to the formation of a seven-membered nickelacycle from a diene and an alkyne.     

Synthetic studies and mechanistic insight in nickel-catalyzed [4+2+1] cycloadditions

A new nickel-catalyzed procedure for the [4+2+1] cycloaddition of (trimethylsilyl)diazomethane with alkynes tethered to dienes has been developed. A broad range of unsaturated substrates participate in the sequence, and stereoselectivities are generally excellent. Stereochemical studies provided evidence for a mechanism that involves the [3,3] sigmatropic rearrangement of divinylcyclopropanes.     

Synthesis of New 4,4a-Dihydroxanthones via [4+2]-Cycloaddition Reaction

Russian Journal of General Chemistry - The effect of electronic properties of substituents in the reactants on the [4+2]-cycloaddition of 3-vinyl-chromen-4-ones (dienes) and N-vinylpyrrolidines...     

Acetylenic Vinyllithiums: Consecutive Cycloisomerization-[4 + 2] Cycloaddition Reactions

Acetylenic vinyllithiums (2), which were generated from the corresponding acetylenic vinyl bromides (3) by low-temperature lithium-bromine exchange, cyclize on warming to give, following quench with water, isomerically pure conjugated bis-exocyclic 1,3-dienes (1) in good to excellent yield. Both five-membered and six-membered outer-ring dienes may be prepared: 5-exo closure of an acetylenic vinyllithium, which proceeds with total stereocontrol via syn-addition to give the E-isomer of a five-membered outer-ring diene, tolerates aryl-, silyl-, or alkyl-substituents at the distal acetylenic carbon; the corresponding 6-exo process is less facile and seems to be confined to substrates bearing an anion-stabilizing substituent, such as phenyl or trimethylsilyl, at the terminal acetylenic carbon. The highly reactive bis-exocyclic 1,3-dienes serve as precursors to polycyclic materials through subsequent Diels-Alder reaction with a wide variety of dienophiles. The consecutive exchange-cyclization-cycloaddition methodology, which can be conducted in one pot without isolation of intermediates, provides an efficient, operationally simple, and diastereoselective route to diverse polycyclic ring systems.     

A highly enantioselective [4+2] cycloaddition involving aldehydes and β,γ-unsaturated-α-keto esters

A stereoselective inverse electron demand oxo-Diels-Alder reaction involving electron poor dienes (γ-aryl-β,γ-unsaturated-α-keto ester) and electron rich dienophiles has been studied. These cycloaddition reactions are extremely useful for the construction of O-, N-, S-centered heterocyclic compounds, which are routinely used in both synthetic organic and medicinal chemistry. The [4+2] hetero cycloaddition reactions involving various aldehydes and β,γ-unsaturated-α-keto esters were carried out in which three different types of substituted proline catalysts were examined. For these reactions, high selectivities (enantiomeric excess 93–98%) were obtained using catalyst 3. Due to the bulkiness of catalyst 3, compared to the other catalysts tested, it is more efficient at catalyzing these type reactions.     

A [2++4] polar cycloaddition of α-chlorosulfides with conjugated dienes: one-pot synthesis of 1-acyl- and 1-cyano-1-methylthio-2-vinylcyclopropanes

In the presence of SnCl₄, methoxycarbonyl-, acetyl-, benzoyl-, or cyano-substituted chloromethyl methyl sulfide (1–4) undergoes [2⁺+4] polar cycloaddition with conjugated dienes to afford the cycloadducts of type 7, which, on treatment with base, are converted into the 1-acyl- or 1-cyano-1-methylthio-2-vinylcyclopropanes 9–10 via the ylide intermediates of type 8.     

Stereoselective [4+2]‐Cycloaddition with Chiral Alkenylboranes

A method for the stereoselective [4+2]‐cycloaddition of alkenylboranes and dienes is presented. This transformation was accomplished through the introduction of a new strategy that involves the use of chiral N‐protonated alkenyl oxazaborolidines as dieneophiles. The reaction leads to the formation of products that can be readily derivatized to more complex structural motifs through stereospecific transformations of the C?B bond such as oxidation and homologation. Detailed computation evaluation of the reaction has uncovered a surprising role of the counterion on stereoselectivity.     

自然轨道福井函数和成键活性描述符应用于解释苯硫醌和1, 3-二烯的[2+4]和[4+2]环加成反应中的成键机理

苯硫醌与脂肪族烯烃可以发生[2+4]和[4+2]环加成反应。为了解释这些环加成反应中的成键过程,本文使用了自然轨道福井函数(NOFF)与成键活性描述符。自然轨道福井函数揭示了苯硫醌和脂肪族烯烃的键或轨道的亲电性,表明电子供体的成键轨道和电子受体的反键/成键轨道之间发生了电子转移,然后成环,在这一过程中有两个共价键形成,得到了环状产物。成键活性描述符表明共价键比较容易在一个分子中具有较大f_k1⁺值的k1原子与另一个分子中具有较大f_k2^-值的k2原子之间形成。自然轨道福井函数与成键活性描述符都可以有效解释苯硫醌与1, 3-二烯之间的[2+4]与[4+2]环加成反应的机理。     

Synthesis of functionalized arylpyridines and -pyrimidines by domino [4+2]/retro [4+2] cycloadditions of electron-rich dienes with alkynylpyridines and -pyrimidines

Aryl-substituted pyridines and pyrimidines were prepared by [4+2] cycloadditions of alkynyl-substituted pyridines and -pyrimidines with electron-rich dienes. The reactions proceed by formation of a bridged cycloadduct and subsequent thermal extrusion of ethylene. The pyridine moiety plays a crucial role for the success of the reaction.     

Intramolecular 4+2 cycloaddition of thieno[2,3-e][1,2,4]triazines: routes towards condensed thieno[2,3-b]pyridines

Synthetic approaches towards new condensed thienopyridine ring systems including furo[2,3-b]thieno[3,2-e]pyridines, bisthieno[2,3-b:3′,2′-e]pyridines, 5H-chromeno[2,3-b]thieno[3,2-e]pyridines, 5H-benzo(f)chromeno[2,3-b]thieno[3,2-e]pyridines have been achieved by application of intramolecular 4+2 cycloaddition reactions of suitably designed thieno[2,3-e][1,2,4]triazines tethered with alkene or alkyne terminals.