An efficient route to disymmetrically substituted calix[6]arenes. Synthesis of novel ligands presenting a N2S or N3CO2 binding core

The C_3v tris-methoxy calix[6]arene was selectively mono-alkylated by dibromoethane yielding a key intermediate for the design of disymmetrically O-substituted calix[6]arenes. Indeed, subsequent reactions with various functional groups afforded novel calix[6]arene-based biomimetic ligands that present a mixed donor N₂S or N₃CO₂⁻ environment in an efficient way.     

Synthesis,characterization and X-ray structures of N-heterocyclic carbene palladium complexes based on calix[4]arenes: highly efficient catalysts towards Suzuki–Miyaura cross-coupling reactions

A new series of calix[4]arene supported N-heterocyclic carbene palladium complexes were developed and fully characterized. A mono-substituted calix[4]arene was prepared through conventional procedures, following with the attachment of imidazolyl derivative groups to compose the precursors of novel NHCs ligands. Undergoing the alkylation with n-butylbromide and corresponding metallation with palladium and pyridine, original complexes were obtained. After a full characterization in solution and solid state, the evaluation of catalytic activity was taken out in Suzuki–Miyaura cross-coupling reactions, which revealed good performances.     

Preparation of calix[4]arene-based sporopollenin and examination of its dichromate sorption ability

The present study describes the preparation of a new calix[4]arene-based sporopollenin material and its application for the removal of Na₂Cr₂O₇ from aqueous solution. The novel calix[4]arene-based sporopollenin material was prepared via the immobilization of dihydrazine amide derivative of p-tert-butylcalix[4]arene (3) onto the modified sporopollenin. The newly prepared calix[4]arene-based sporopollenin is characterized by using different analytical techniques such as FT-IR spectroscopy, scanning electron microscope and Elemental analysis. The batch wise sorption study was carried out to optimize various experimental parameters such as the effect of sorbent dosage, pH, temperature and Cr(VI) anion concentration. It has been found that the sorption of Cr(VI) anion on calix[4]arene-based sporopollenin was highly pH dependent and maximum sorption was achieved at pH 1.5. The sorption behavior was also evaluated by Langmuir, Freundlich and Dubinin Radushkevich isotherms. The value of correlation coefficient (R ²) showed a good agreement with Freundlich isotherm model. Result of study demonstrated that calix[4]arene-based sporopollenin proved to be highly effective for the removal of Cr(VI).     

Highly enantioselective copper-catalyzed allylic alkylation with atropos phosphoramidites bearing a D2-symmetric biphenyl backbone

A novel class of atropos dibridged biphenyl phosphoramidites bearing a D₂-symmetric biphenyl backbone was prepared and applied as chiral ligands in the copper-catalyzed allylic alkylation with Grignard reagent. The alkylation products were obtained in quantitative yields with high regioselectivities up to 94:6 of S_N2′/S_N2 ratio and enantiomeric excesses up to 91.1% for S_N2′ products. The unique D₂-symmetric backbone ligands have the advantages of easy preparation and sufficient reusability of their key intermediates from the undesired isomers.     

Synthesis of calix[4]arene alkylamine derivatives as new phase-transfer catalysts for esterification reaction

This study reports the synthesis of calix[4]arene-based phase-transfer catalysts derived from the reaction of 5,17-di-tert-butyl-25,27,26,28-tetrahydroxycalix[4]arene with N-ethylpiperazine, diallylamine or 4-benzylpiperidine. The catalytic efficiency of the calix[4]arenes alkylamine derivatives was evaluated by carrying out the ester-forming reaction of alkali metal carboxylates (sodium butyrate or sodium caprylate) with p-nitrobenzyl bromide. It has been observed that the ester-forming reaction of alkali metal carboxylates with p-nitrobenzyl bromide, using the N-ethylpiperazine amine derivative of calix[4]arene as a phase-transfer catalyst in dichloromethane at 25 °C, provided the best yields.     

Liquid membrane transport of cytochrome c using a calix[6]arene carboxylic acid derivative as a carrier

The present study examined the liquid membrane transport of the cationic protein cytochrome c, using the macrocyclic compound calix[6]arene, which is a carboxylic acid derivative, as a carrier. The transport rate was governed by carrier concentration and the pH gradient between the feed and the receiving phases, as well as the salt concentration in the aqueous phases. Transport of cytochrome c was examined using a series of calix[n]arene carboxylic acid derivatives (n = 4, 6 and 8). Cytochrome c successfully permeated membranes in the presence of the calix[6]arene derivative. Liquid membrane separation of cytochrome c from a mixture of cationic proteins was demonstrated under optimal conditions. Cytochrome c was selectively extracted by the calix[6]arene carboxylic acid derivative and 77% of the extracted cytochrome c was recovered into the receiving phase. In this liquid membrane system, which discriminates between the number of lysine residues on the surface of proteins, cationic proteins with similar molecular weights and pIs were separated with macrocyclic compounds.     

Me3SiCl-promoted intramolecular cyclization of aromatic compounds tethered with N,O-acetals leading to the facile preparation of 1,4-benzodiazepine skeletons

The Me₃SiCl-promoted intramolecular aminomethylation of a novel type of N,O-acetals, which were prepared via a facile three-step synthesis from N-alkylaniline derivatives and N-alkyl-2-oxazolidinones that leads to the production of pharmaceutically useful 1,4-benzodiazepine skeletons with a variety of functional groups is described. This method was successfully applied to the facile preparation of both tricyclic benzodiazepine derivatives and a 1,4-benzoxazepine derivative via 7-exo-trig cyclization.     

Brønsted acidic magnetic nano-Fe3O4-adorned calix[n]arene sulfonic acids: synthesis and application in the nucleophilic substitution of alcohols

Three magnetically recoverable Brønsted acidic calix[n]arene derivatives were successfully constructed by immobilizing calix[n]arene sulfonic acids onto silica-coated magnetic nanoparticles, a process, which allows calix[n]arene derivatives to acquire magnetic properties. All of the magnetically recoverable Brønsted acidic calix[n]arenes efficiently catalyze the coupling of electron-rich arenes with some alcohols in water. After separation and recovery from the reaction mixture by a simple magnet, these Brønsted acidic calix[n]arenes can be recycled many times without losing their catalytic activity.     

Two anionic [Cu6X7]n (X=Br and I) chain-based organic-inorganic hybrid solids with N-substituted benzotriazole ligands

Solvothermal reactions of the flexible ligand 1,6-Bi(benzotriazole)hexane with CuI and KI or CuBr and KBr in ethanol generate two hybrid compounds, namely, {(HETA)[(Cu₆I₇)(ETA)₂]}_n(1) and {K(Cu₆Br₇)(BBTH)}_n(2) (ETA=N-ethylbenzotriazole, HETA=protonated N-ethylbenzotriazole, BBTH=1,6-bi(benzotriazole)hexane). In 1, two [Cu₃I₄] vertex missing cubane-like subunits link each other by sharing one I atom to give a [Cu₆I₇] cluster, which further form novel 1D [Cu₆I₇]_nⁿ⁻ anionic chain. Two in-situ generated ETA ligands finished the 4-coordinated environments of copper centers and another one discrete protonated ETA ligand keeps the charge neutrality for 1. In complex 2, bowl-shaped [Cu₅Br₄] clusters and rhomboid [Cu₂Br₂] dimers link each other to generate a [Cu₆Br₇]_nⁿ⁻ 1D chain. BBTH ligands complete the tetrahedral spheres of Cu(I), and 7-coordinated K atoms further extend the 1D chain motifs to a 2D hybrid layer of 2. The UV-vis diffuse reflectance spectrum and luminescence measurements show that compound 1 and 2 both are potential semiconductor and photoluminescence materials.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Multivalent calixarene-based C-fucosyl derivative: a new Pseudomonas aeruginosa biofilm inhibitor

The first example of multivalent conjugate in which four α-l-C-fucosyl units are clustered by means of a calix[4]arene platform was designed as a new potential Pseudomonas aeruginosa biofilm inhibitor. The anti-biofilm activity of the synthesized compound (6) against PAO1 strain was assayed and it was found to be dose-dependent. The presence of the fucose cluster improves the biofilm inhibitor efficiency as proven by the lower inhibitor activity of the analogous glycyl-calix[4]arene derivative (3) lacking in the fucose moieties.     

Studies on Mixed Monolayers and Langmuir–Blodgett Films of Schiff-Base Complex Cu(SBC18)2 and Calix[4]arene

Mixed monolayers of Schiff-base complex Cu(SBC₁₈)₂ with an octadecyl hydrocarbon chain and Calix[4]arene without a long alkyl chain at an air/water interface were studied in ultrapure water at different temperatures. Interface behavior and thermodynamic estimation of the mixed monolayer indicate that a strong intermolecular interaction exists between the mixed components (Cu(SBC₁₈)₂ and calix[4]arene) and the two-dimensional miscibility decreases with the molar fraction of Cu(SBC₁₈)₂. It is noticeable that the calix[4]arene monolayer can be transferred successfully onto solid substrates due to the introduction of Cu(SBC₁₈)₂. FTIR transmission and UV-Vis absorption spectra of mixed LB films provide further evidence of molecular interaction between the headgroups.     

Preparation, spectroscopic properties of 1,4-di (N,N-diisopropylacetamido)-2,3(1H,4H)-quinoxalinedione (L) lanthanide complexes and the supramolecular structure of [Nd2L2(NO3)6(H2O)2]·H2O

The reaction of lanthanide nitrate with 1,4-di (N,N-diisopropylacetamido)-2,3(1H,4H)-quinoxalinedione (L) yields six novel Ln(III) complexes ([Ln₂L₂(NO₃)₆(H₂O)₂]·H₂O) which are characterized by elemental analysis, thermogravimetric analysis (TGA), conductivity measurements, IR, electronic and ¹H NMR spectroscopies. A new quinoxalinedione-based ligand is used as antenna ligand to sensitize the emission of lanthanide cations. The lowest triplet state energy level of the ligand in the nitrate complex matches better to the resonance level of Eu(III) and Sm(III) than Tb(III) and Dy(III) ion. The f-f fluorescence is induced in the Eu³⁺ and Sm³⁺ complexes by exciting into the π-π* absorptions of the ligand in the UV. Furthermore, the crystal structures of a novel binuclear complex [Nd₂L₂(NO₃)₆(H₂O)₂]·H₂O has been determined by single-crystal X-ray diffraction. The binuclear [Nd₂L₂(NO₃)₆(H₂O)₂]·H₂O complex units are linked by the intermolecular hydrogen bonds and π-π interactions to form a two-dimensional (2-D) layer supramolecule.     

Ab initio and density functional studies of cooperative hydrogen bonding in calix[4]-and calix[6]arenes

The cone conformation of C ₄ symmetry is shown by the Hartree-Fock method (3-21G basis) to be the predominant conformer of calix[4]arene; the compressed cone of C ₂ symmetry is the major conformer of calix[6]arene. Using quantum chemical methods we calculated hydrogen bond cleavage energies for calix[4]-(ab initio and density functional methods) and calix[6]arene (ab initio), and also for the complex of calix[4]arene with carbon disulfide. These energies along with structural data point to the cooperative effect of hydrogen bonds. The results of these studies provided an explanation to the greater conformational lability of calix[6]arene compared with calix[4]arene molecules. It is also predicted that the nucleophilic substitution reaction involving calix[6]arene in the presence of weak bases and in aprotic solvents, as well as in the gas phase, will occur via diastereomeric transition states.     

InBr3-Et3N promoted alkynylation of aldehydes and N,O-acetals under mild conditions: facile and simple preparation of propargylic alcohols and amines

The use of a novel InBr₃-Et₃N reagent system to promote addition reactions of 1-alkynes not only with a variety of aromatic or bulky aliphatic aldehydes but also with N,O-acetals is described. The corresponding propargylic alcohols or amines are produced in good to excellent yields.     

The effect of N-heterocyclic carbene ligands in the palladium-catalyzed cross-coupling reaction of K[C6F5BF3] with aryl iodides and aryl bromides

The effect of N-heterocyclic carbene (NHC) ligands on the catalytic activity of in situ generated palladium complexes in the model cross-coupling reaction of K[C₆F₅BF₃] with 4-FC₆H₄I was studied. Based on the obtained results, a series of pentafluorobiphenyls C₆F₅C₆H₄X were prepared from K[C₆F₅BF₃] and XC₆H₄I or 4-CF₃C₆H₄Br in high yields under aerobic conditions.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Diester intrabridging of p-tert-butylcalix[8]arene and unexpected formation of the monospirodienone derivative

Reaction of p-tert-butylcalix[8]arene 1 with adipoyl chloride in the presence of NaH as the base yielded singly and doubly intrabridged esters 2-4 and 6. Surprisingly, calix[8]arene monospirodienone derivative 7 was also isolated, which was originated by O₂ oxidation. The conditions of this oxidation were optimized leading to a novel synthetic approach to calixarene monospirodienones based on the O₂/NaH/acyl-chloride oxidizing system. Xantheno calix[8]arenes 8-8a were obtained by rearrangement of 7.     

High yield preparation of a novel tetrakis[ruthenium tris(bipyridine)]calix[6]arene derivative with good diastereomeric purity

In order to develop methodology for the selective preparation of complex molecular structures with potential photochemical or electron transfer functions, the diastereoselective synthesis of multiple ruthenium tris(bipyridine) complexes tethered to a central calix[6]arene core was investigated. Applying recently developed methodology, the resolved precursor cis-Δ-[Ru(bpy)₂(DMSO)Cl]PF₆ (98.6% ee) was efficiently reacted with a novel calix[6]arene derivative, to give the tetrakis[Ru(bpy)₂(bpy′)]calix[6]arene derivative (9) with almost complete retention of absolute stereochemistry at each of the four metal centres, as seen by the unusually strong molar circular dichroism (CD) spectrum. The synthesis of racemic 9 was also carried out, and demonstrated to have an inactive CD spectrum.     

Convenient and efficient Suzuki-Miyaura cross-coupling reactions catalyzed by palladium complexes containing N,N,O-tridentate ligands

N,N,O-Tridentate ligands 1-9 were prepared from the condensation of amines with nine aromatic aldehydes or ketones. These ligands are thermally stable and neither air- nor moisture-sensitive. Combination of either 2-methoxy-6-[(pyridine-2-ylmethylimino)-methyl]-phenol, 1 or 2-(benzothiazol-2-yl-hydrazonomethyl)-4,6-di-tert-butyl-phenol, 6 with Pd(OAc)₂ furnished an excellent catalyst precursor for the Suzuki-Miyaura cross-coupling of various aryl bromides with arylboronic acids. The effects of varying solvents, bases, and ligand/palladium ratios on the performance of the coupling reaction were investigated. The molecular structures of both free ligand 1 and its palladium acetate complex 10 were determined by single-crystal X-ray diffraction methods. The DFT studies revealed that the catalytic performance of palladium complexes involving this type of a ligand may differ greatly upon a small variation in its structure.