A facile synthesis of 3 or 3,3′-substituted binaphthols and their applications in the asymmetric addition of diethylzinc to aldehydes

By using a direct ortho-lithiation, the ligands (S)-3-methoxymethyl-1,1′-bi-2-naphthol [(S)-1], (S)-3,3′-bis(methoxymethyl)-1,1′-bi-2-naphthol [(S)-2], (S)-3-(quinolin-2-yl)-1,1′-bi-2-naphthol [(S)-3] and (S)-3,3′-bis(quinolin-2-yl)-1,1′-bi-2-naphthol [(S)-4] have been synthesized. (S)-1 and (S)-3 show moderate catalytic properties for the asymmetric diethylzinc addition to aromatic aldehydes.     

Enantioselective alkynylation to aldimines catalyzed by chiral 2,2′-di(2-aminoaryloxy)-1,1′-binaphthyl-copper(I) complexes

The enantioselective alkynylation of aldimines with terminal acetylenes catalyzed by chiral Cu(I) complexes with (R)-2,2′-di(2-aminoaryloxy)-1,1′-binaphthyl ligands (7) was examined. Chiral C₂-symmetric N,N-ligands 7, which have primary aniline moieties, were readily prepared from inexpensive (R)-1,1′-binaphthol (BINOL) as a chiral source. In particular, the reaction of N-benzylidenebenzeneamine 1a with phenylacetylene 2a proceeded smoothly in the presence of 5 mol % of (CuOTf)₂·C₆H₅CH₃ and 10 mol % of (R)-7d at room temperature for 24 h, and the corresponding propargylamine 3a was obtained with up to 82% ee.     

Asymmetric addition of phenylacetylene to aldehydes catalyzed by soluble optically active polybinaphthols ligand

A chiral polymer ligand was synthesized by the polymerization of (S)-5,5′-dibromo-6,6′-dibutyl-2,2′-binaphthol (S-M-1) with (S)-2,2′-bishexyloxy-1,1′-binaphthyl-6,6′-boronic acid (S-M-2) via Pd-catalyzed Suzuki reaction. The application of the chiral polymer ligand to the asymmetric addition of phenylethynyl zinc to various aldehydes has been studied. The results show that the soluble chiral polybinaphthols ligand in combination with Et₂Zn and Ti(OⁱPr)₄ can exhibit excellent enantioselectivity for phenylacetylene addition to both aromatic and aliphatic aldehydes. The catalytically active center of the repeating unit S-1 used as a catalyst produced the opposite configuration of the propargylic alcohols to that of S-1, on the contrary, the chiral polymer gave the same configuration as the optically active binaphthol moiety of the polybinaphthols ligand. Moreover, the chiral polymer ligand can be easily recovered and reused without loss of catalytic activity as well as enantioselectivity.     

Resolution-free route to chiral 2,2-bis(pyridin-2-yl)-1,1-binaphthyl ligand: photochemical CpCo(CO)2-mediated cycloaddition of enantiopure 2,2-dicyano-1,1-binaphthyl with diynes

A resolution-free route to chiral 2,2^′-bis(pyridin-2-yl)-1,1^′-binaphthyl ligands 2 was developed for the first time based on the photochemical CpCo(CO)₂-mediated cycloaddition reaction of enantiopure 2,2^′-dicyano-1,1^′-binaphthyl 3 with 1,6-heptadiyne, 1,7-octadiyne, 1,8-nonadiyne, and 2,8-decadiyne.     

Synthesis and characterization of polybinaphthalene incorporating chiral (R) or (S)-1,1′-binaphthalene and oxadiazole units by Heck reaction

Chiral conjugated polymers P-1 and P-2 were synthesized by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthalene ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthalene ((S)-M-1) with 2,5-bis(4-vinylphenyl)-1,3,4-oxadiazole (M-2) under Pd-catalyzed Heck coupling reaction, respectively. Both monomers and polymers were analysed by NMR, MS, FT-IR, UV, DSC-TG, fluorescent spectroscopy, GPC and CD spectra. The chiral conjugated polymers exhibit strong Cotton effect in their circular dichroism (CD) spectra indicating a high rigidity of polymer backbone. CD spectra of polymers P-1 and P-2 are almost identical and have opposite signs for their position. These polymers have strong blue fluorescence.     

Dendritic polyallyl and polyferrocenyl bipyridine ligands: Synthesis, MALDI-TOF characterization and ruthenium(II) complexation studies

A series of 6- and 18-armed dendritic polyallyl- and polyferrocenyl-containing bipyridine ligands were synthesized through the coupling reaction of 4,4′-bis(bromomethyl)-2,2′-bipyridine with AB₃ and AB₉ dendrons. All these bipyridine ligands were successfully characterized using standard physico-chemical techniques as well as MALDI-TOF mass spectrometric analysis. The complexation studies of these ligands toward RuCl₂(bpy)₂ indicated that, in contrast to the bulky 18-ferrocenyl bipyridine ligand 7, the 6-allyl 4 and the 18-allyl 5 bipyridine ligands react with Ru(bpy)₂Cl₂ to give the corresponding ruthenium(II) complexes 9 and 10. In the case of ligand 7, the steric bulk of the two nonaferrocenyl wedges at the 4,4′-position of the bipyridine moiety prevents the conversion of the transoid structure of the ligand to the cisiod structure needed for chelation to the metal. Thus, the 18-ferrocenyl ruthenium(II) dendrimer was not obtained. Metallodendrimers 9 and 10 have been characterized by a combination of analytical methods, especially MALDI-TOF mass spectrometric techniques. The hydrogenation of the 6-allyl ruthenium(II) dendrimer 9 in the presence of Pd/C catalyst gave the expected n-propyl complex 11. This reaction constitutes a new way for the direct synthesis of alkyl bipyridine metallodendrimers. The coordination of the alkene dendritic bipyridine ligand to the metal before the catalytic hydrogenation is absolutely necessary, because of their poisoning effect for the catalyst.     

Synthesis, structure, and catalytic activity of titanium(IV) and zirconium(IV) amides with chiral biphenyldiamine-based ligands

A new series of titanium(IV) and zirconium(IV) amides have been prepared from the reaction between M(NMe₂)₄ (M = Ti, Zr) and C₂-symmetric ligands, (R)-2,2′-bis(pyridin-2-ylmethylamino)-6,6′-dimethyl-1,1′-biphenyl (2H₂), (R)-2,2′-bis(pyrrol-2-ylmethyleneamino)-6,6′-dimethyl-1,1′-biphenyl (3H₂), (R)-2,2′-bis(diphenylphosphinoylamino)-6,6′-dimethyl-1,1′-biphenyl (4H₂), (R)-2,2′-bis(methanesulphonylamino)-6,6′-dimethyl-1,1′-biphenyl (5H₂), (R)-2,2′-bis(p-toluenesulphonylamino)-6,6′-dimethyl-1,1′-biphenyl (6H₂), and C₁-symmetric ligands, (R)-2-(diphenylthiophosphoramino)-2′-(dimethylamino)-6,6′-dimethyl-1,1′-biphenyl (7H) and (R)-2-(pyridin-2-ylamino)-2′-(dimethylamino)-6,6′-dimethyl-1,1′-biphenyl (8H), which are derived from (R)-2,2′-diamino-6,6′-dimethyl-1,1′-biphenyl. Treatment of M(NMe₂)₄ with 1 equiv. of N₄-ligand, 2H₂ or 3H₂ gives, after recrystallization from an n-hexane solution, the chiral zirconium amides (2)Zr(NMe₂)₂ (9), (3)Zr(NMe₂)₂ (11), and titanium amide (3)Ti(NMe₂)₂ (10), respectively, in good yields. Reaction of Zr(NMe₂)₄ with 1 equiv of diphenylphosphoramide 4H₂ affords the chiral zirconium amide (4)Zr(NMe₂)₂ (12) in 85% yield. Under similar reaction conditions, treatment of Ti(NMe₂)₄ with 1 equiv. of sulphonylamide ligand, 5H₂ or 6H₂ gives, after recrystallization from a toluene solution, the chiral titanium amides (5)Ti(NMe₂)₂·0.5C₇H₈ (13·0.5C₇H₈) and (6)Ti(NMe₂)₂ (15), respectively, in good yields, while reaction of Zr(NMe₂)₄ with 1 equiv. of 5H₂ or 6H₂ gives the bis-ligated complexes, (5)₂Zr (14) and (6)₂Zr (16). Treatment of M(NMe₂)₄ with 2 equiv. of diphenylthiophosphoramide ligand 7H or N₃-ligand 8H gives, after recrystallization from a benzene solution, the bis-ligated chiral zirconium amides (7)₂Zr(NMe₂)₂ (17) and (8)₂Zr(NMe₂)₂ (19), and bis-ligated chiral titanium amide (8)₂Ti(NMe₂)₂ (18), respectively, in good yields. All new compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of complexes 10, 12, 13, and 17-19 have further been confirmed by X-ray diffraction analyses. The zirconium amides are active catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, affording cyclic amines in good to excellent yields with moderate ee values, while the titanium amides are not.     

S-Transalkylation/ring closing metathesis as a route to azathiamacrocycles incorporating 2,2′-bipyridine subunits

A new route to cyclophanes 6a,b incorporating 2,2′-bipyridine subunits has been elaborated using as the key steps (1) S-transalkylation of 6,6′-bis(methylsulfanyl)-2,2′-bipyridines 2a,b with ethyl bromoacetate resulting in the formation of 6,6′-bis[(ethoxycarbonyl)methylsulfanyl]-2,2′-bipyridines 3a,b and (2) ring-closing metathesis of the corresponding alkenyl ethers 5a,b.     

The highly regiospecific synthesis and crystal structure determination of 1,1′-2,5′ substituted ring-locked ferrocenes

1,1′-Ferrocene biscarboxaldehyde (1) has been prepared and the aldehyde groups were subsequently protected with acetal groups to produce 1,1′-bisacetalferrocene (2). A ring-locked ferrocene was synthesised by further derivatisation of the cyclopentadiene rings at the 2,2′ positions with phosphine substituents to produce 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene (3), which was subsequently coordinated to either a nickel chloride (5) or nickel bromide (6) metal centre. The ring-locked ferrocene complexes produced 2,5′-bis-(acetal)-1,1′-diphenylphosphinoferrocene substitution patterns. The acetal protecting groups of 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene were removed to produce 1,1′-bis-carboxaldehyde-2,2′-diphenylphosphinoferrocene (4). The Cp rings of 1,1′-bisacetalferrocene were also further derivatised at the 2,2′ positions with a silane to produce the ring-locked 1,1′-siloxane-2,5′-bisacetalferrocenophane (7). The acetal protecting groups were removed from this to produce 1,1′-siloxane-2,5′-ferrocenophanecarboxaldehyde (8). For both the phosphine and siloxane electrophiles, the substitution on the Cp rings gives chiral products (obtained as racemic mixtures). Due to the highly regioselective nature of the reaction and diastereoselectivity in the products only C₂-symmetric compounds were observed without the presence of meso diastereoisomers. Subsequent ring-locking forced the Cp rings to rotate, leading to 1,1′-ring-locked ferrocenes with 2,5′-arrangement of the acetal groups (i.e. on opposite faces of the ferrocene unit).     

1,1′-Binaphthyl ligands with bulky 3,3′-tertiaryalkyl substituents for the asymmetric alkyne addition to aromatic aldehydes

The BINOL ligand (R)-2 that contains bulky 3,3′-tertiaryalkyl groups shows improved catalytic properties over the previously reported 3,3′-substituted BINOL ligands in the asymmetric alkyne addition to aromatic aldehydes. It catalyzes the phenylacetylene addition to aromatic aldehydes with high enantioselectivity (86-94% ee) and good yields without using Ti(OⁱPr)₄ and a Lewis base additive. The catalytic properties of several analogs of (R)-2 in the asymmetric alkyne addition to aldehydes have also been studied.     

Chiral cyclopentadienyl ruthenium(II) complexes with P,P-ligands derived from (1R,2R)-1,2-diaminocyclohexane: Synthesis,crystal structures and catalytic activity in Diels–Alder reactions

Chiral cyclopentadienyl ruthenium(II) complexes [CpRu(L1–L3)Cl] (5–7) have been prepared by reaction of [CpRu(PPh₃)₂Cl] with chiral P,P-ligands (1R,2R)-1,2-bis(diphenylphosphinamino)cyclohexane (L1), N,N′-[bis-(3,3′-bis-tert-butyl-5,5′-bis-methoxy-1,1′-biphenyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L2) and N,N′-[bis-(R)-1,1′-binaphtyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L3). The molecular structures of 5 and 6 have been determined by single-crystal X-ray analysis. Studies on catalytic activity of the cations derived from (5–7) by treatment with AgSbF₆, are also reported.     

Synthesis and characterization of Palladium(II) complexes of chiral chelating NHC-N donor hybrid ligands

A new class of palladium(II) complexes of chelating NHC-N donor hybrid ligands, such as NHC-sulfonamide (6), NHC-phenoxyimine (11), NHC-phenylimine (14), and NHC-amine (15) have been successfully synthesized in modest yields from 1,1′-binaphthyl-2,2′-diamine (BINAM). These complexes have been characterized by all the spectroscopic data, and the structures of 6, 11, and 14 were also confirmed by single-crystal X-ray diffraction studies, exhibiting a tridentate chelating motif around the palladium center.     

Reaction of azulene with 1,2-bis[4-(dimethylamino)phenyl]-1,2-ethanediol in a mixed solvent of methanol and acetonitrile in the presence of hydrochloric acid: a facile one-pot synthesis and properties of new triarylethylenes possessing an azulen-1-yl group

Reaction of azulene (1) with 1,2-bis[4-(dimethylamino)phenyl]-1,2-ethanediol (2) in a mixed solvent of methanol and acetonitrile in the presence of 36% hydrochloric acid at 60 °C for 3 h gives 2-(azulen-1-yl)-1,1-bis[4-(dimethylamino)phenyl]ethylene (3) (8% yield), 1-(azulen-1-yl)-(E)-1,2-bis[4-(dimethylamino)phenyl]ethylene (4) (28% yield), and 1,3-bis{2,2-bis[4-(dimethylamino)phenyl]ethenyl}azulene (5) (9% yield). Besides the above products, this reaction affords 1,1-di(azulen-1-yl)-2,2-bis[4-(dimethylamino)phenyl]ethane (6) (15% yield), a meso form (1R,2S)-1,2-di(azulen-1-yl)-1,2-bis[4-(dimethylamino)phenyl]ethane (7) (6% yield), and the two enantiomeric forms (1R,2R)- and (1S,2S)-1,2-di(azulen-1-yl)-1,2-bis[4-(dimethylamino)phenyl]ethanes (8) (6% yield). Furthermore, addition reaction of 3 with 1 under the same reaction conditions as the above provides 6, in 46% yield, which upon oxidation with DDQ (=2,3-dichloro-5,6-dicyano-1,4-benzoquinone) in dichloromethane at 25 °C for 24 h yields 1,1-di(azulen-1-yl)-2,2-bis[4-(dimethylamino)phenyl]ethylene (9) in 48% yield. Interestingly, reaction of 1,1-bis[4-(dimethylamino)phenyl]-2-(3-guaiazulenyl)ethylene (11) with 1 in a mixed solvent of methanol and acetonitrile in the presence of 36% hydrochloric acid at 60 °C for 3 h gives guaiazulene (10) and 3, owing to the replacement of a guaiazulen-3-yl group by an azulen-1-yl group, in 91 and 46% yields together with 5 (19% yield) and 6 (13% yield). Similarly, reactions of 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (12) and 1,1-bis{4-[2-(dimethylamino)ethoxy]phenyl}-2-(3-guaiazulenyl)ethylene (13) with 1 under the same reaction conditions as the above provide 10, 2-(azulen-1-yl)-1,1-bis(4-methoxyphenyl)ethylene (16), and 1,3-bis[2,2-bis(4-methoxyphenyl)ethenyl]azulene (17) (93, 34, and 19% yields) from 12 and 10 and 2-(azulen-1-yl)-1,1-bis{4-[2-(dimethylamino)ethoxy]phenyl}ethylene (18) (97 and 58% yields) from 13.     

Synthesis and characterisation of two new binaphthyl trisilanes

The synthesis and characterisation of two binaphthyl trisilanes is described. Reaction between 2,2′-dilithio-1,1′-binaphthyl and 1,3-dichlorohexamethyltrisilane gave 3,3,4,4,5,5-hexamethyl-4,5-dihydro-3H-3,4,5-trisilacyclohepta[2,1-a;4,3-a′]binaphthalene (3). Compound 3 was characterised by ¹H, ¹³C and ²⁹Si NMR spectroscopy and a crystal structure analysis. Reaction between 2,2′-dilithio-1,1′-binaphthyl and 1,3-bis(trifluoromethanesulfonyloxy)-1,1,2,3,3-pentamethyltrisilane, generated in situ by treatment of 1,3-diphenyl-1,1,2,3,3-pentamethyltrisilane with trifluormethanesulfonic acid, gave 3,3,4,5,5-pentamethyl-4,5-dihydro-3H-3,4,5-trisilacyclohepta[2,1-a;4,3-a′]binaphthalene (7). Analysis by ¹H, ¹³C and ²⁹Si NMR spectroscopy revealed that 7 had a very similar structure to 3.     

A new type of chiral porphyrin: Organopalladium porphyrins with chiral chelating diphosphine ligands

Peripherally palladated Ni(II) porphyrins have been prepared using enantiopure chiral chelating diphosphines as supporting ligands on the attached Pd(II) fragment. Both enantiomers of the following complexes have been obtained in good yields, using oxidative addition of the bromoporphyrin starting material 5-bromo-10,20-diphenylporphyrinatonickel(II) (NiDPPBr (1)) to the [Pd⁰L] complex generated in situ from Pd₂dba₃ and the chiral ligand L: [PdBr(NiDPP)(CHIRAPHOS)] (2a,b) [CHIRAPHOS = 2,3-bis(diphenylphosphino)butane], [PdBr(NiDPP)(Tol-BINAP)] (3a,b) [Tol-BINAP) = 2,2′-bis(di-p-tolylphosphino)-1,1′-binaphthyl] and [PdBr(NiDPP)(diphos)] [diphos = 1,2-bis(methylphenylphosphino)benzene] (4a,b). The induced asymmetry in the porphyrin was readily detected by ¹H NMR and CD spectroscopy. The porphyrin chiroptical properties are strongly dependent upon the structure of the chiral ligand, such that a monosignate CD signal, and symmetric and asymmetric exciton couplets were observed for 4a, 2b, and 3a,b, respectively.     

A planar silacyclobutane, 1,1-(rac-1,1′-bi-2-naphthoxy)-1-silacyclobutane and its unusual reaction with bis(1,5-cyclooctadiene)platinum(0)

The synthesis, characterization and X-ray crystal structure of 1,1-(rac-1,1′-bi-2-naphthoxy)-1-silacyclobutane (1) are reported and reveal an unusual planar conformation with a Si-βC distance of 2.302 (5) Å. Reaction of 1 with either stoichiometric or catalytic amounts of bis(1,5-cyclooctadiene)platinum(0) {Pt(cod)₂} gave 1,1′-bi-2-naphthol (BINOL), rather than the expected insertion products or polymer. A mechanism is proposed based on insertion of the Pt(cod) into 1 followed by hydride transfers via the Pt center to the 1,1′-bi-2-naphthoxy group. Anionic ring-opening polymerization of 1 is also reported and gave the poly(carbosilane) (4).     

Synthesis and X-ray structures of new chiral Ag(I) complexes with biaryl-based N4-donor ligands

Condensation of (R)-2,2′-diamino-1,1′-binaphthyl or (R)-6,6′-dimethylbiphenyl-2,2′-diamine with 2 equiv of 2-pyridine carboxaldehyde in toluene in the presence of molecular sieves at 70 °C gives (R)-N,N′-bis(pyridin-2-ylmethylene)-1,1′-binaphthyl-2,2′-diimine (1), and (R)-N,N′-bis(pyridin-2-ylmethylene)-6,6′-dimethylbiphenyl-2,2′-diimine (3), respectively, in good yields. Reduction of 1 with an excess of NaBH₄ in a solvent mixture of MeOH and toluene (1:1) at 50 °C gives (R)-N,N′-bis(pyridin-2-ylmethyl)-1,1′-binaphthyl-2,2′-diamine (2) in 95% yield. Rigidity plays an important role in the formation of helicate silver(I) complexes. Treatment of 1, or 3 with 1 equiv of AgNO₃ in mixed solvents of MeOH and CH₂Cl₂ (1:4) gives the chiral, dinuclear double helicate Ag(I) complexes [Ag₂(1)₂][NO₃]₂ (4) and [Ag₂(3)₂][NO₃]₂ · 2H₂O (6), respectively, in good yields. While under the similar reaction conditions, reaction of 2 with 1 equiv of AgNO₃ affords the chiral, mononuclear single helicate Ag(I) complex [Ag(2)][NO₃] (5) in 90% yield. [Ag₂(1)₂][NO₃]₂ (4) can further react with excess AgNO₃ to give [Ag₂(1)₂]₃[NO₃]₂[Ag(CH₃OH)(NO₃)₃]₂ · 2CH₃OH (7) in 75% yield. All compounds have been fully characterized by various spectroscopic techniques and elemental analyses. Compounds 1 and 5-7 have been further subjected to single-crystal X-ray diffraction analyses.     

Biomimetic synthesis of the dinaphthofuranquinone violet-quinone, utilizing oxidative dimerization with the ZrO2/O2 system

The first total and biomimetic synthesis of violet-quinone (1), which has a dinaphthofuranquinone (DNFQ) framework, is described. This synthesis features the oxidative dimerization of 1-naphthol 4 and the construction of the DNFQ framework by photochemical ring closure of 2,2′-binaphthoquinone 7 as a key intermediate. Compound 7 was prepared by the novel oxidative dimerization of 4 with a semiconductor (such as ZrO₂) in the presence of dioxygen, followed by oxidation of the resulting 2,2′-binaphthyl-1,1′-quinone 6 with HNO₃.     

A novel class of organosoluble and light-colored fluorinated polyamides derived from 2,2-bis(4-amino-2-trifluoromethylphenoxy)biphenyl or 2,2-bis(4-amino-2-trifluoromethylphenoxy)-1,1-binaphthyl

Two series of novel fluorinated aromatic polyamides were prepared from 2,2^′-bis(4-amino-2-trifluoromethylphenoxy)biphenyl (2) and 2,2^′-bis(4-amino-2-trifluoromethylphenoxy)-1,1^′-binaphthyl (4) with various aromatic dicarboxylic acids using the phosphorylation polycondensation technique. The polyamides had inherent viscosities ranging from 0.43 to 0.62 dl/g and 0.36 to 0.74 dl/g, respectively. All the fluorinated polyamides were soluble in many polar organic solvents such as N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidinone, and afforded transparent, light-colored, and flexible films upon casting from DMAc solvent. These polyamides showed glass-transition temperatures in the ranges of 190-240 °C (for the 6 series from diamine 2) and 247-255 °C (for the 7 series from diamine 4) by differential scanning calorimetry, softening temperatures in the ranges of 196-230 °C (6 series) and 241-291 °C (7 series) by thermomechanical analysis, and decomposition temperatures for 10% weight loss above 420 °C in both nitrogen and air atmospheres.     

Efficient bimetallic titanium catalyst for carbonyl-ene reaction

A new family of achiral 3,3′,5,5′-tetrasubstituted-2,2′,6,6′-tetrahydroxy biphenyl ligand 4 was developed. The axial chirality of the ligand could be induced by the chelation of 2,2′,6,6′-tetrahydroxy groups with (R)-BINOL-Ti(OⁱPr)₂ to form an axially chiral bimetallic titanium catalyst 9. Compared with (R)-BINOL-Ti(OⁱPr)₂ catalyst, this novel catalyst 9 exhibited excellent activity and enantioselectivity for the carbonyl-ene reaction of methylstyrene and ethyl glyoxylate. 3,3′,5,5′-Tetrasubstituted groups showed a remarkable effect on both enantioselectivity and yield. With 9d prepared from 3,3′,5,5′-tetramethyl-2,2′,6,6′-tetrahydroxy biphenyl 4d as the catalyst, the best result, up to 97.6% ee and 99% yield, was obtained. Additionally, the bimetallic catalyst 9 also showed better catalytic capability than the corresponding monometallic catalyst.