Kinetic mechanisms in morpholino-DNA surface hybridization

Morpholinos (MOs) are DNA analogues whose uncharged nature can bring fundamental advantages to surface hybridization technologies such as DNA microarrays, by using MOs as the immobilized, or "probe", species. Advancement of MO-based diagnostics, however, is challenged by limited understanding of the surface organization of MO molecules and of how this organization impacts hybridization kinetics and thermodynamics. The present study focuses on hybridization kinetics between monolayers of MO probes and DNA targets as a function of the instantaneous extent of hybridization (i.e., duplex coverage), total probe coverage, and ionic strength. Intriguingly, these experiments reveal distinct kinetic stages, none of which are consistent with Langmuir kinetics. The initial stage, in which duplex coverage remains relatively sparse, indicates confluence of two effects: blockage of target access to unhybridized probes by previously formed duplexes and deactivation of the solid support due to consumption of probe molecules. This interpretation is consistent with a surface organization in which unhybridized MO probes localize near the solid support, underneath a layer of MO-DNA duplexes. As duplex coverage builds, provided saturation is not reached first, the initial stage can transition to an unusual regime characterized by near independence of hybridization rate on duplex coverage, followed by a prolonged approach to equilibrium. The possible origins of these more complex latter behaviors are discussed. Comparison with published data for DNA and peptide nucleic acid (PNA) probes is carried out to look for universal trends in kinetics. This comparison reveals qualitative similarities when comparable surface organization of probes is expected. In addition, MO monolayers are found capable of a broad range of reactivities that span reported values for PNA and DNA probes.     

An Electrochemical Study of the Surface Hybridization Process of Morpholino‐DNA: Thermodynamics and Kinetics

Morpholino (MO) is a neutral analogue of DNA, which shows promise in the development of DNA biosensors and diagnostic devices. The present study explores the hybridization process of a surface‐attached MO 22‐mer with 10‐mer and 20‐mer DNA targets on a gold electrode. The melting process of the MO‐DNA duplex at the electrode/buffer interface is recorded using cyclic voltammetry. These results show that the length of target DNA, the binding location of the target DNA on the surface‐immobilized MO chain, and electrostatic forces from neighbouring duplexes all modulate the stability and hybridization kinetics of the DNA targets with the MO probes. Melting temperatures for immobilized MO‐DNA duplexes are found to be insensitive to ionic strength, provided the duplexes do not have a linker. Although the melting temperature does not shift appreciably with ionic strength, the maximum hybridization yield does. This somewhat surprising observation is considered to originate from an electrostatic limit on the extent of attainable hybridization. It is also reported that hybridization tends to initiate at the upper half of MO probes.     

Electroactive chitosan nanoparticles for the detection of single-nucleotide polymorphisms using peptide nucleic acids

Here we report an electrochemical biosensor that would allow for simple and rapid analysis of nucleic acids in combination with nuclease activity on nucleic acids and electroactive bionanoparticles. The detection of single-nucleotide polymorphisms (SNPs) using PNA probes takes advantage of the significant structural and physicochemical differences between the full hybrids and SNPs in PNA/DNA and DNA/DNA duplexes. Ferrocene-conjugated chitosan nanoparticles (Chi-Fc) were used as the electroactive indicator of hybridization. Chi-Fc had no affinity towards the neutral PNA probe immobilized on a gold electrode (AuE) surface. When the PNA probe on the electrode surface hybridized with a full-complementary target DNA, Chi-Fc electrostatically attached to the negatively-charged phosphate backbone of DNA on the surface and gave rise to a high electrochemical oxidation signal from ferrocene at ∼0.30 V. Exposing the surface to a single-stranded DNA specific nuclease, Nuclease S1, was found to be very effective for removing the nonspecifically adsorbed SNP DNA. An SNP in the target DNA to PNA made it susceptible to the enzymatic digestion. After the enzymatic digestion and subsequent exposure to Chi-Fc, the presence of SNPs was determined by monitoring the changes in the electrical current response of Chi-Fc. The method provided a detection limit of 1 fM (S/N = 3) for the target DNA oligonucleotide. Additionally, asymmetric PCR was employed to detect the presence of genetically modified organism (GMO) in standard Roundup Ready soybean samples. PNA-mediated PCR amplification of real DNA samples was performed to detect SNPs related to alcolohol dehydrogenase (ALDH). Chitosan nanoparticles are promising biometarials for various analytical and pharmaceutical applications. Figure The electrochemical method for SNP detection using PNA probes and chitosan nanoparticles takes advantage of the significant structural and physicochemical differences between PNA/DNA and DNA/DNA duplexes. Single-stranded DNA specific enzymes selectively choose these SNP sites and hydrolyze the DNA molecules on gold electrode (AuE) surface. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

PNA探针与DNA探针的系统比较

肽核酸（Peptide Nucleic Acid,PNA）是近十几年发展起来的以中性酰胺键为骨架的脱氧核糖核酸（Deoxyribonucleic Acid,DNA）类似物,其结构介于多肽和DNA之间。由于PNA能够与DNA和RNA特异性地结合,可以制备PNA探针。与DNA探针相比,其杂交的稳定性和特异性增加且能在低盐浓度下进行杂交。本文从DNA和PNA的分子结构和性质、DNA探针和PNA探针的设计制备、杂交亲和性、杂交动力学以及在生物传感器上的应用等方面进行了系统比较。     

Hybridization of PNA to structured DNA targets: quadruplex invasion and the overhang effect

Peptide nucleic acid (PNA) probes have been synthesized and targeted to quadruplex DNA. UV-vis and CD spectroscopy reveal that the quadruplex structure of the thrombin binding aptamer (TBA) is disrupted at 37 degrees C by a short PNA probe. The corresponding DNA probe fails to bind to the stable secondary structure at this temperature. Thermal denaturation experiments indicate surprisingly high thermal and thermodynamic stabilities for the PNA-TBA hybrid. Our results point to the nonbonded nucleobase overhangs on the DNA as being responsible for this stability. This "overhang effect" is found for two different PNA-DNA sequences and a variety of different overhang lengths and sequences. The stabilization offered by the overhangs assists the PNA in overcoming the stable secondary structure of the DNA target, an effect which may be significant in the targeting of biological nucleic acids, which will always be much longer than the PNA probe. The ability of PNA to invade a structured DNA target expands its potential utility as an antigene agent or hybridization probe.     

Hybridization efficiency of molecular beacons bound to gold nanowires: effect of surface coverage and target length

Surface-bound nucleic acid probes designed to adopt specific secondary structures are becoming increasingly important in a range of biosensing applications but remain less well characterized than traditional single-stranded probes, which are typically designed to avoid secondary structure. We report the hybridization efficiency for surface-immobilized hairpin DNA probes. Our probes are molecular beacons, carrying a 3' dye moiety and a 5' thiol for attachment to gold nanowires, which serve as both scaffolds for probe attachment and quenchers. Hybridization efficiency was dependent on probe surface coverage, reaching a maximum of ～90% at intermediate coverages of (1-2) × 10(12) probes/cm(2) and dropping to ≤20% at higher or lower coverages. Fluorescence intensity did not track with the number of target molecules bound, and was highest for high probe coverage despite the lower bound targets per square centimeter. Backfilling with short thiolated oligoethylene glycol spacers increased hybridization efficiency at low hairpin probe coverages (～(3-4) × 10(11) probes/cm(2)), but not at higher probe coverages (1 × 10(12)/cm(2)). We also evaluated the effect of target length by adding up to 50 nonhybridizing nucleotides to the 3' or 5' end of the complementary target sequence. Additional nucleotides on the 3' end of the complementary target sequence (i.e., the end near the nanowire surface) had a much greater impact on hybridization efficiency as compared to nucleotides added to the 5' end. This work provides guidance in designing sensors in which surface-bound probes designed to adopt secondary structures are used to detect target sequences from solution.     

Label‐Free Bioelectronic Detection of Point Mutation by Using Peptide Nucleic Acid Probes

An electrochemical hybridization biosensor based on peptide nucleic acid (PNA) probes with a label‐free protocol is described. The detection of PNA‐DNA and DNA‐DNA hybridizations were accomplished based on the oxidation signal of guanine by using differential pulse voltammetry (DPV) at carbon paste electrode (CPE). It was observed that the oxidation signals of guanine obtained from the PNA and DNA probe modified CPEs were higher than those obtained from the PNA‐DNA and DNA‐DNA hybrid modified CPEs due to the accessible unbound guanine bases. The detection of hybridization between PNA probe and point mutation containing DNA target sequences was clearly observed due to the difference of the oxidation signals of guanine bases, because the point mutation was guanine nearly at the middle of the sequence. The effect of the DNA target concentration on the hybridization signal was also observed. The PNA probe was also challenged with excessive and equal amount of noncomplementary DNA and also mixtures of point mutation and target DNA.     

Paramagnetic Particles and PNA Probe for Automated Separation and Electrochemical Detection of Influenza

Considerable efforts have been devoted to the development of rapid and sensitive methods allowing the detection of viral nucleic acid. We herein describe an assay for identification of a specific influenza sequence. The suggested method was based on isolation using paramagnetic particles coupled with electrochemical detection of isolated product. Peptide nucleic acid (PNA) was used as a probe for hybridization and identification of the influenza-derived specific sequence. The use of PNA can show numerous benefits: PNA probe is not degradable by enzymes and the duplex of PNA with RNA/DNA is more thermostable and more resistant to pH changes than DNA/DNA or RNA/RNA duplexes. This PNA probe assay can be applied as a magnetically guidable tool for detection of DNA/RNA samples under different conditions.     

Paramagnetic Particles and PNA Probe for Automated Separation and Electrochemical Detection of Influenza

Considerable efforts have been devoted to the development of rapid and sensitive methods allowing the detection of viral nucleic acid. We herein describe an assay for identification of a specific influenza sequence. The suggested method was based on isolation using paramagnetic particles coupled with electrochemical detection of isolated product. Peptide nucleic acid (PNA) was used as a probe for hybridization and identification of the influenza-derived specific sequence. The use of PNA can show numerous benefits: PNA probe is not degradable by enzymes and the duplex of PNA with RNA/DNA is more thermostable and more resistant to pH changes than DNA/DNA or RNA/RNA duplexes. This PNA probe assay can be applied as a magnetically guidable tool for detection of DNA/RNA samples under different conditions.

     

Molecular assessment of S1 endonuclease-resistant snapback hairpin loops generated by DNA polymerase I during the in-vitro nick translation reaction

The in-vitro nick translation reaction used to label DNA to high specific activity also produces aberrant DNA structures known as “snapback” hairpin loops. Hairpin structures are precluded from participating in precise DNA-DNA hybridization interactions. Three nick translation systems were all found to yield significant quantities of snapback hairpins, as determined by their resistance to S1 endonuclease digestion following denaturation. The relative quantities of hairpins produced correlated with both the mass average size of the final DNA probe product synthesized as well as the overall rate of the nick translation reaction. Decreases in the amount of exogenous DNase I used in nick translation reactions produced significant decreases in the amount of hairpin loop structures formed. Hairpins could be effectively removed from nick-translated DNAs by employing hydroxylapatite column chromatography. Strategies to reduce hairpin formation during nick translation and the removal of hairpins from nick-translated DNAs are presented.     

Isostable DNA

The high fidelity detection of multiple DNA sequences in multiplex assays calls for duplexes whose stability is independent of sequence (isostable DNA), forming under universally stringent conditions. Nature did not evolve DNA to form isostable duplexes. Here we report how probe strands can be modified so that an all-A/T target strand is bound with the same or slightly higher affinity than the corresponding all-G/C strand with the same sequence of purines and pyrimidines. We refer to these probes that feature covalently attached ligands as "decorated nucleic acids". Caps, intercalators, and locks were used to stabilize A/T duplexes, and N4-ethylcytosine residues were employed to tune down the stability of G/C duplexes without significantly affecting base pairing selectivity. Near-isostability was demonstrated in solution and on microarrays of high and low density. Further, it is shown that hybridization results involving decorated probes on microarrays can be predicted on the basis of thermodynamic data for duplex formation in solution. Predictable formation of isostable DNA not only benefits microarrays for gene expression analysis and genotyping, but may also improve the sequence-specificity of other applications that rely on the massively parallel formation of Watson-Crick duplexes.     

Highly Stable Duplex Formation by Artificial Nucleic Acids Acyclic Threoninol Nucleic Acid (aTNA) and Serinol Nucleic Acid (SNA) with Acyclic Scaffolds

The stabilities of duplexes formed by strands of novel artificial nucleic acids composed of acyclic threoninol nucleic acid (aTNA) and serinol nucleic acid (SNA) building blocks were compared with duplexes formed by the acyclic glycol nucleic acid (GNA), peptide nucleic acid (PNA), and native DNA and RNA. All acyclic nucleic acid homoduplexes examined in this study had significantly higher thermal stability than DNA and RNA duplexes. Melting temperatures of homoduplexes were in the order of aTNA>PNA≈GNA≥SNA?RNA>DNA. Thermodynamic analyses revealed that high stabilities of duplexes formed by aTNA and SNA were due to large enthalpy changes upon formation of duplexes compared with DNA and RNA duplexes. The higher stability of the aTNA homoduplex than the SNA duplex was attributed to the less flexible backbone due to the methyl group of D ‐threoninol on aTNA, which induced clockwise winding. Unlike aTNA, the more flexible SNA was able to cross‐hybridize with RNA and DNA. Similarly, the SNA/PNA heteroduplex was more stable than the aTNA/PNA duplex. A 15‐mer SNA/RNA was more stable than an RNA/DNA duplex of the same sequence.     

Coordination-driven inversion of handedness in ligand-modified PNA

Peptide nucleic acid (PNA) is a synthetic analogue of DNA, which has the same nucleobases as DNA but typically has a backbone based on aminoethyl glycine (Aeg). PNA forms duplexes by Watson Crick hybridization. The Aeg-based PNA duplexes adopt a chiral helical structure but do not have a preferred handedness because they do not contain a chiral center. An L-lysine situated at the C-end of one or both strands of a PNA duplex causes the duplex to preferably adopt a left-handed structure. We have introduced into the PNA duplexes both a C-terminal L-lysine and one or two PNA monomers that have a γ-(S)-methyl-aminoethyl glycine backbone, which is known to induce a preference for a right-handed structure. Indeed, we found that in these duplexes the γ-methyl monomer exerts the dominant chiral induction effect causing the duplexes to adopt a right-handed structure. The chiral PNA monomer had a 2,2':6',2'-terpyridine (Tpy) ligand instead of a nucleobase and PNA duplexes that contained one or two Tpys formed [Cu(Tpy)(2)](2+) complexes in the presence of Cu(2+). The CD spectroscopy studies showed that these metal-coordinated duplexes were right-handed due to the chiral induction effect exerted by the S-Tpy PNA monomer(s) except for the cases when the [Cu(Tpy)(2)](2+) complex was formed with Tpy ligands from two different PNA duplexes. In the latter case, the metal complex bridged the two PNA duplexes and the duplexes were left-handed. The results of this study show that the preferred handedness of a ligand-modified PNA can be switched as a consequence of metal coordination to the ligand. This finding could be used as a tool in the design of functional nucleic-acid based nanostructures.     

The influence of sequence context and length on the kinetics of DNA duplex formation from complementary hairpins possessing (CNG) repeats

The formation of unusual structures during DNA replication has been invoked for gene expansion in genomes possessing triplet repeat sequences, CNG, where N = A, C, G, or T. In particular, it has been suggested that the daughter strand of the leading strand partially dissociates from the parent strand and forms a hairpin. The equilibrium between the fully duplexed parent:daugter species and the parent:hairpin species is dependent upon their relative stabilities and the rates of reannealing of the daughter strand back to the parent. These stabilities and rates are ultimately influenced by the sequence context of the DNA and its length. Previous work has demonstrated that longer strands are more stable than shorter strands and that the identity of N also influences the thermal stability [Paiva, A. M.; Sheardy, R. D. Biochemistry 2004, 43, 14218-14227]. Here, we show that the rate of duplex formation from complementary hairpins is also sequence context and length dependent. In particular, longer duplexes have higher activation energies than shorter duplexes of the same sequence context. Further, [(CCG):(GGC)] duplexes have lower activation energies than corresponding [(CAG):(GTC)] duplexes of the same length. Hence, hairpins formed from long CNG sequences are more thermodynamically stable and have slower kinetics for reannealing to their complement than shorter analogues. Gene expansion can now be explained in terms of thermodynamics and kinetics.     

Use of peptide nucleic acid probes for detecting DNA single-base mutations by capillary electrophoresis

Peptide nucleic acid (PNA) oligomers can be used as probes in pre-gel hybridization experiments, as an alternative to Southern hybridization. In this technique, the PNA probe is hybridized to a cyanine-5 labeled DNA sample denatured at low ionic strength, and the mixture is directly injected for size separation into a capillary electrophoresis (CE) system equipped with laser-induced fluorescence (LIF) detector. The neutral backbone of PNA allows hybridization to occur at low ionic strength and assures an efficient CE separation of the PNA/DNA hybrids from both double-stranded and single-stranded DNA. We have used as a model system the cystic fibrosis R553X and R1162X single-base mutations and we have assessed the influence of various factors, such as temperature and denaturants concentration on DNA/PNA hybrid stability in order to achieve the high specificity required for a single base pair discrimination.     

Enzyme-amplified electrochemical hybridization assay based on PNA, LNA and DNA probe-modified micro-magnetic beads

In the present study, we investigated the properties of PNA and LNA capture probes in the development of an electrochemical hybridization assay. Streptavidin-coated paramagnetic micro-beads were used as a solid phase to immobilize biotinylated DNA, PNA and LNA capture probes, respectively. The target sequence was then recognized via hybridization with the capture probe. After labeling the biotinylated hybrid with a streptavidin–enzyme conjugate, the electrochemical detection of the enzymatic product was performed onto the surface of a disposable electrode. The assay was applied to the analytical detection of biotinylated DNA as well as RNA sequences. Detection limits, calculated considering the slope of the linear portion of the calibration curve in the range 0–2 nM were found to be 152, 118 and 91 pM, coupled with a reproducibility of the analysis equal to 5, 9 and 6%, calculated as RSD%, for DNA, PNA and LNA probes respectively, using the DNA target. In the case of the RNA target, the detection limits were found to be 51, 60 and 78 pM for DNA, PNA and LNA probes respectively.     

The extent of DNA deformation in DNA photolyase-substrate complexes: a solution state fluorescence study.

Cyclobutylpyrimidine dimers (CPDs) are the major UV photoproduct formed in DNA containing adjacent pyrimidines. These lesions can be repaired by DNA photolyase, a flavoprotein that utilizes blue light in a direct reversal of the cyclobutane ring. Previous studies have shown that the CPD is base flipped into the protein, with concomitant disruption of the substrate around the CPD. In this study, we use a fluorescent cytidine analog, pyrrolo-dC (PC), to probe how far base flipping propagates along the duplex. From these measurements, the degree of base destacking in the two bases flanking the adenines opposing the CPD appears to be minimal, which was consistent with the protein:substrate crystal structure. Fluorescence-detected melting temperatures for duplexes with and without a CPD were obtained, suggesting that a 5'-pyrimidine-PC-purine-3' motif is more stable than the 5'-purine-PC-pyrimidine-3' motif. This stability trend was reflected in the fluorescence intensities of ss-PC oligos but not for duplexes. The melting point depression due to the PC probe was found to be comparable to other popular fluorescent base analogs.     

Metal binding to bipyridine-modified PNA

Substitution of natural nucleobases in PNA oligomers with ligands is a strategy for directing metal ion incorporation to specific locations within a PNA duplex. In this study, we have synthesized PNA oligomers that contain up to three adjacent bipyridine ligands and examined the interaction with Ni2+ and Cu2+ of these oligomers and of duplexes formed from them. Variable-temperature UV spectroscopy showed that duplexes containing one terminal pair of bipyridine ligands are more stable upon metal binding than their nonmodified counterparts. While binding of one metal ion to duplexes that contain two adjacent bipyridine pairs makes the duplexes more stable, additional metal ions lower the duplex stability, with electrostatic repulsions being, most likely, an important contributor to the destabilization. UV titrations showed that the presence of several bipyridine ligands in close proximity of each other in PNA oligomers exerts a chelate effect. A supramolecular chelate effect occurs when several bipyridines are brought next to each other by hybridization of PNA duplexes. EPR spectroscopy studies indicate that even when two Cu2+ ions coordinate to a PNA duplex in which two bipyridine pairs are next to each other, the two metal-ligand complexes that form in the duplex are far enough from each other that the dipolar coupling is very weak. EXAFS and XANES show that the Ni2+-bipyridine bond lengths are typical for [Ni(bipy)2]2+ and [Ni(bipy)3]2+ complexes.     

(SR/RS)-cyclohexanyl PNAs: conformationally preorganized PNA analogues with unprecedented preference for duplex formation with RNA

PNA oligomers H-GTAGATCAT-lys-NH2 with cis-(1S,2R/1R,2S)-cyclohexyl-T (III) in the backbone form PNA:RNA duplexes with Tm approximately 30-50 degrees C higher than that of PNA:DNA duplexes. In comparison, cis-(1S,2R/1R,2S)-cyclopentyl PNA-T (IV) form highly stable duplexes with both RNA and DNA without discrimination.     

DNA and PNA sensing on mercury and carbon electrodes by using methylene blue as an electrochemical label

Described here are the electrochemical parameters for MB on binding to DNA at hanging mercury drop electrode (HMDE), glassy carbon electrode (GCE), and carbon paste electrode (CPE) in the solution and at the electrode surface. MB, which interacts with the immobilized calf thymus DNA, was detected by using single-stranded DNA-modified HMDE or CPE (ssDNA-modified HMDE or CPE), bare HMDE or CPE, and double-stranded DNA-modified HMDE or CPE (dsDNA-modified HMDE or CPE) in combination with adsorptive transfer stripping voltammetry (AdTSV), differential pulse voltammetry (DPV), and alternating current voltammetry (ACV) techniques. The structural conformation of DNA and hybridization between synthetic peptide nucleic acid (PNA) and DNA oligonucleotides were determined by the changes in the voltammetric peak of MB. The PNA and DNA probes were also challenged with excessive and equal amount of noncomplementary DNA and a mixture that contained one-base mismatched and target DNA. The partition coefficient was also obtained from the signal of MB with probe, hybrid, and ssDNA-modified GCEs. The effect of probe, target, and ssDNA concentration upon the MB signal was investigated. These results demonstrated that MB could be used as an effective electroactive hybridization indicator for DNA biosensors. Performance characteristics of the sensor are described, along with future prospects.