A chlorinated non-fullerene acceptor for efficient polymer solar cells

After additive and thermal annealing treatment, the PM6:Y15 based device obtains a high power conversion efficiency of 14.13%.     

A chlorinated non-fullerene acceptor for efficient polymer solar cells

Improving the performance and reducing the manufacturing costs are the main directions for the development of organic solar cells in the future. Here, the strategy that uses chemical structure modification to optimize the photoelectric properties is reported. A new narrow bandgap (1.30 eV) chlorinated non-fullerene electron acceptor (Y15), based on benzo[d][1,2,3] triazole with two 3-undecyl-thieno[2′,3′:4,5] thieno[3,2-b] pyrrole fused -7-heterocyclic ring, with absorption edge extending to the near-infrared (NIR) region, namely A-DA'D-A type structure, is designed and synthesized. Its electrochemical and optoelectronic properties are systematically investigated. Benefitting from its NIR light harvesting, the fabricated photovoltaic devices based on Y15 deliver a high power conversion efficiency (PCE) of 14.13%, when blending with a wide bandgap polymer donor PM6. Our results show that the A-DA'D-A type molecular design and application of near-infrared electron acceptors have the potential to further improve the PCE of polymer solar cells (PSCs).     

A new non-fullerene acceptor based on the heptacyclic benzotriazole unit for efficient organic solar cells

正Non-fullerene acceptors (NFAs) become an interesting family of organic photovoltaic materials, and have attracted considerable interest for their great potential in manufacturing large-area flexible solar panels by low cost coating methods [1–5]. Recently, our group proposed in the first time an A-DA’D-A molecular strategy and synthesized a new class of non-fullerene acceptor Y6 with a record efficiency above 15%with single junction organic solar cells (OSCs)[6]. To further improve the photovoltaic performance     

A near-infrared porphyrin-based electron acceptor for non-fullerene organic solar cells

A star-shaped electron acceptor with porphyrin as core and rhodanine-benzothiadiazole as end groups linked with ethynyl units was developed for non-fullerene solar cells, in which a PCE of 1.9% with broad photo response was achieved when combining with a diketopyrrolopyrrole-polymer as electron donor.     

Alkoxy substituted benzodithiophene-alt-fluorobenzotriazole copolymer as donor in non-fullerene polymer solar cells

A new benzodithiophene(BDT)-alt-fluorobenzotriazole(FBTA) D-A copolymer J40 was designed and synthesized by introducing 2-octyldodecyloxy side chains on its BDT units, for expanding the family of the BDT- alt-FBTA-based copolymers and investigating the side chain effect on the photovoltaic performance of the polymer in non-fullerene polymer solar cells(PSCs).J40 exhibits complementary absorption spectra and matched electronic energy levels with the n-type organic semiconductor(n-OS)(3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-sindaceno[1,2-b:5,6-b′]dithiophene)(ITIC) acceptor, and was used as polymer donor in the non-fullerene PSCs with ITIC as acceptor. The power conversion efficiency(PCE) of the PSCs based on J40:ITIC(1:1, w/w) with thermal annealing at 120 °C for 10 min reached 6.48% with a higher open-circuit voltage(Voc) of 0.89 V. The high Voc of the PSCs is benefitted from the lower-lying highest occupied molecular orbital(HOMO) energy level of J40. Although the photovoltaic performance of the polymer J40 with alkoxy side chain is lower than that of J60 and J61 with alkylthio-thienyl conjugated side chains, the PCE of6.48% for the J40-based device is still a relatively higher photovoltaic efficiency in the non-fullerene PSCs reported so far. The results indicate that the family of the BDT-alt-FBTA-based D-A copolymers are high performance polymer donor materials for non-fullerene PSCs and the side chain engineering plays an important role in the design of high performance polymer donors in the non-fullerene PSCs.     

Regulating the morphology of fluorinated non-fullerene acceptor and polymer donor via binary solvent mixture for high efficiency polymer solar cells

Fluorinated non-fullerene acceptors(NFAs) usually have planar backbone and a higher tendency to crystallize compared to their non-fluorinated counterparts, which leads to enhanced charge mobility in organic solar cells(OSCs). However, this selforganization behavior may result in excessive phase separation with electron donors and thereby deteriorate device efficiency.Herein, we demonstrate an effective approach to tune the molecular organization of a fluorinated NFA(INPIC-4 F), and its phase separation with the donor PBDB-T, by varying the casting solvent. A prolonged film drying time encourages the crystallization of INPIC-4 F into spherulites and consequently results in excessive phase separation, leading to a low device power conversion efficiency(PCE) of 8.1%. Contrarily, a drying time leads to fine mixed domains with inefficient charge transport properties,resulting in a moderate device PCE of 11.4%. An intermediate film drying time results in the formation of face-on π-π stacked PBDB-T and INPIC-4 F domains with continuous phase-separated networks, which facilitates light absorption, exciton dissociation as well as balanced charge transport towards the electrode, and achieves a remarkable PCE of 13.1%. This work provides a rational guide for optimizing the molecular ordering of NFAs and electron donors for high device efficiency.     

A non-fullerene acceptor enables efficient P3HT-based organic solar cells with small voltage loss and thickness insensitivity

The large D core of DFPCBR results in efficient P3HT-based OSCs with a high V_OC and thickness insensitivity.     

Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency

A high performance polymer solar cells(PSCs) based on polymer donor PM6 containing fluorinated thienyl benzodithiophene unit and n-type organic semiconductor acceptor IT-4 F containing fluorinated end-groups were developed. In addition to complementary absorption spectra(300–830 nm) with IT-4 F, the PM6 also has a deep HOMO(the highest occupied molecular) level(-5.50 e V), which will lower the open-circuit voltage(V_(oc)) sacrifice and reduce the E_(loss) of the IT-4 F-based PSCs. Moreover, the strong crystallinity of PM6 is beneficial to form favorable blend morphology and hence to suppress recombination. As a result, in comparison with the PSCs based on a non-fluorinated D/A pair of PBDB-T:ITIC with a medium PCE of 11.2%, the PM6:IT-4 Fbased PSCs yielded an impressive PCE of 13.5% due to the synergistic effect of fluorination on both donor and acceptor, which is among the highest values recorded in the literatures for PSCs to date. Furthermore, a PCE of 12.2% was remained with the active layer thickness of up to 285 nm and a high PCE of 11.4% was also obtained with a large device area of 1 cm~2. In addition, the devices also showed good storage, thermal and illumination stabilities with respect to the efficiency. These results indicate that fluorination is an effective strategy to improve the photovoltaic performance of materials, as well as the both fluorinated donor and acceptor pair-PM6:IT-4 F is an ideal candidate for the large scale roll-to-roll production of efficient PSCs in the future.     

Layer-by-layer assembled multilayer TiO(x) for efficient electron acceptor in polymer hybrid solar cells

We demonstrate that TiO(x) nanocomposite films fabricated using electrostatic layer-by-layer (LbL) assembly improve the power conversion efficiency of photovoltaic cells compared to conventional TiO(x) films fabricated via the sol-gel process. For this study, titanium precursor/poly(allylamine hydrochloride) (PAH) multilayer films were first deposited onto indium tin oxide-coated glass to produce TiO(x) nanocomposites (TiO(x)NC). The specific effect of the LbL processed TiO(x) on photovoltaic performance was investigated using the planar bilayer TiO(x)NC and highly regioregular poly(3-hexylthiophene) (P3HT) solar cells, and the P3HT/LbL TiO(x)NC solar cells showed a dramatic increase in power efficiency, particularly in terms of the short current density and fill factor. The improved efficiency of this device is mainly due to the difference in the chemical composition of the LbL TiO(x)NC films, including the much higher Ti(3+)/Ti(4+) ratio and the highly reactive facets of crystals as demonstrated by XPS and XRD measurement, thus enhancing the electron transfer between electron donors and acceptors. In addition, the grazing incidence wide-angle X-ray scattering (GIWAXS) study revealed the presence of more highly oriented P3HT stacks parallel to the substrate on the LbL TiO(x)NC film compared to those on the sol-gel TiO(x) films, possibly influencing the hole mobility of P3HT and the energy transfer near and at the interface between the P3HT and TiO(x) layers. The results of this study demonstrate that this approach is a promising one for the design of hybrid solar cells with improved efficiency.     

Impact of symmetry-breaking of non-fullerene acceptors for efficient and stable organic solar cells

The concurrent enhancement of short-circuit current (J_SC) and open-circuit voltage (V_OC) is a key problem in the preparation of efficient organic solar cells (OSCs). In this paper, we report efficient and stable OSCs based on an asymmetric non-fullerene acceptor (NFA) IPC-BEH-IC2F. The NFA consists of a weak electron-donor core dithienothiophen[3,2-b]-pyrrolobenzothiadiazole (BEH) and two kinds of strong electron-acceptor (A) units [9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) with a tricyclic fused system and 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC2F)]. For comparison, the symmetric NFAs IPC-BEH-IPC and IC2F-BEH-IC2F were characterised. The kind of flanking A unit significantly affects the light absorption features and electronic structures of the NFAs. The asymmetric IPC-BEH-IC2F has the highest extinction coefficient among the three NFAs owing to its strong dipole moment and highly crystalline feature. Its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels lie between those of the IPC-BEH-IPC and IC2F-BEH-IC2F molecules. The IPC group also promotes molecular packing through the tricyclic π-conjugated system and achieves increased crystallinity compared to that of the IC2F group. Inverted-type photovoltaic devices based on p-type polymer:NFA blends with PBDB-T and PM6 polymers as p-type polymers were fabricated. Among all these devices, the PBDB-T:IPC-BEH-IC2F blend device displayed the best photovoltaic properties because the IPC unit provides balanced electronic and morphological characteristics. More importantly, the PBDB-T:IPC-BEH-IC2F-based device exhibited the best long-term stability owing to the strongly interacting IPC moiety and the densely packed PBDB-T:IPC-BEH-IC2F film. These results demonstrate that asymmetric structural modifications of NFAs are an effective way for simultaneously improving the photovoltaic performance and stability of OSCs.

A 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) moiety in asymmetric non-fullerene acceptors promotes the formation of a densely packed crystalline structure, enabling efficient and long-term stable organic solar cells.     

Chlorinated polymer solar cells simultaneously enhanced by fullerene and non-fullerene ternary strategies

To achieve efficient polymer solar cells(PSCs)with full utilization of the whole spectrum,the multicomponent devices are of great importance to be deeply explored,especially for their capability of one-step fabrication.However,the research about one same binary system simultaneously derivated various multi-component PSC is still very limited.Herein,we achieved the whole constructions from one binary host to different ternary systems and even the quaternary one.The ternary strategies with fullerene acceptor,PC₇₁BM,and non-fullerene acceptor,BT₆IC-BO-4Cl,as the third component,both boosted the device efficiencies of PBT4Cl-Bz:IT-4F binary system from about 9% to comparatively beyond 11%.Despite the comparable improvement of performance,there existed other similarities and differences in two ternary strategies.In detail,the isotropic carrier transport of PC₇₁BM which largely elevated the fill factor(FF)in the corresponding devices,while the strong absorption of BT₆IC-BO-4Cl enhanced the short current density(J_SC)most.More interestingly,quaternary devices based on PBT4Cl-Bz:IT-4F:PC71 BM:BT₆IC-BO-4Cl could combine both advantages of fullerene and non-fullerene ternary strategies,further pumped the J_SC from 16.44 to the highest level of 19.66 mA cm^-2 among all devices,eventually resulted in an optimized efficiency of 11.69%.It reveals that both fullerene and non-fullerene ternary strategies have their unique feature to elevate the device performance either by efficient isotropic carrier transport or better coverage of whole sunlight spectrum and easy tunable energy levels from organic materials.The key is how to integrate the two pathways in one system and provide a more competitive solution facing high-quality PSCs.     

Small bandgap non-fullerene acceptor enables efficient PTB7-Th solar cell with near 0 eV HOMO offset

Three small bandgap non-fullerene(SBG NFAs) acceptors,BDTI,BDTI-2 F and BDTI-4 F,based on a carbon-oxygen bridged central core and thieno[3,4-b]thiophene linker,end-capped with varied electronwithdrawing terminal groups,were designed and synthesized.The acceptors exhibit strong absorption from 600 nm to 1000 nm.The optimal device incorporating designed NFA and PTB7-Th polymer donor achieves a power conversion efficiency of 9.11% with near 0 eV HOMO offset.The work presents a case study of efficient non-fullerene solar cells with small HOMO offsets,which is achieved by blending PTB7-Th with fine-tuned SBG acceptor.     

Utilizing 3,4-ethylenedioxythiophene(EDOT)-bridged non-fullerene acceptors for efficient organic solar cells

A rational design of efficient low-band-gap non-fullerene acceptors(NFAs)for high-performance organic solar cells(OSCs)remains challenging;the main constraint being the decrease in the energy level of the lowest unoccupied molecular orbitals(LUMOs)as the bandgap of A-D-A-type NFAs decrease.Therefore,the short current density(J_sc)and open-circuit voltage(V_oc)result in a trade-off relationship,making it difficult to obtain efficient OSCs.Herein,three NFAs(IFL-ED-4 F,IDT-ED-4 F,and IDTT-ED-2 F)were synthesized to address the above-mentioned issue by introducing 3,4-ethylenedioxythiophene(EDOT)as aπ-bridge.These NFAs exhibit relatively low bandgaps(1.67,1.42,and 1.49 eV,respectively)and upshifted LUMO levels(-3.88,-3.84,and-3.81 eV,respectively)compared with most reported low-band-gap NFAs.Consequently,the photovoltaic devices based on IDT-ED-4 F blended with a PBDB-T donor polymer showed the best power conversion efficiency(PCE)of 10.4%with a high J_sc of 22.1 mA cm^-2 and Voc of 0.884 V among the examined NFAs.In contrast,IDTT-ED-4 F,which was designed with an asymmetric structure of the D-p-A type,showed the lowest efficiency of 1.5%owing to the poor morphology and charge transport properties of the binary blend.However,when this was introduced as the third component of the PM6:BTP-BO-4 Cl,complementary absorption and cascade energy-level alignment between the two substances could be achieved.Surprisingly,the IDTT-ED-4 F-based ternary blend device not only improved the Jscand Voc,but also achieved a PCE of 15.2%,which is approximately 5.3%higher than that of the reference device with a minimized energy loss of 0.488 eV.In addition,the universality of IDTT-ED-2 F as a third component was effectively demonstrated in other photoactive systems,specifically,PM6:BTPe C9 and PTB7-Th:IEICO-4 F.This work facilitates a better understanding of the structure–property relationship for utilizing efficient EDOT-bridged NFAs in high-performance OSC applications.     

Spatial configuration engineering of perylenediimide-based non-fullerene electron transport materials for efficient inverted perovskite solar cells

Due to their excellent photoelectron chemical properties and suitable energy level alignment with perovskite,perylene diimide(PDI)derivatives are competitive non-fullerene electron transport material(ETM)candidates for perovskite solar cells(PSCs).However,the conjugated rigid plane structure of PDI units result in PDI-based ETMs tending to form large aggregates,limiting their application and photovoltaic performance.In this study,to restrict aggregation and further enhance the photovoltaic performance of PDI-type ETMs,two PDI-based ETMs,termed PDO-PDI2(dimer)and PDO-PDI3(trimer),were constructed by introducing a phenothiazine 5,5-dioxide(PDO)core building block.The research manifests that the optoelectronic properties and film formation property of PDO-PDI2 and PDO-PDI3 were deeply affected by the molecular spatial configuration.Applied in PSCs,PDO-PDI3 with threedimensional spiral molecular structure,exhibits superior electron extraction and transport properties,further achieving the best PCE of 18.72%and maintaining 93%of its initial efficiency after a 720-h aging test under ambient conditions.     

A crosslinked polymer as dopant-free hole-transport material for efficient n-i-p type perovskite solar cells

A new crosslinked polymer,called P65,with appropriate photo-electrochemical,opto-electronic,and thermal properties,has been designed and synthesized as an efficient,dopant-free,hole-transport material(HTM)for n-i-p type planar perovskite solar cells(PSCs).P65 is obtained from a low-cost and easily synthesized spiro[fluorene-9,90-xanthene]-30,60-diol(SFX-OH)-based monomer X65 through a freeradical polymerization reaction.The combination of a three-dimensional(3 D)SFX core unit,holetransport methoxydiphenylamine group,and crosslinked polyvinyl network provides P65 with good solubility and excellent film-forming properties.By employing P65 as a dopant-free hole-transport layer in conventional n-i-p type PSCs,a power conversion efficiency(PCE)of up to 17.7%is achieved.To the best of our knowledge,this is the first time a 3 D,crosslinked,polymeric dopant-free HTM has been reported for use in conventional n-i-p type PSCs.This study provides a new strategy for the future development of a 3 D crosslinked polymeric dopant-free HTM with a simple synthetic route and low-cost for commercial,large-scale applications in future PSCs.     

A 3D star-shaped non-fullerene acceptor for solution-processed organic solar cells with a high open-circuit voltage of 1.18 V

A novel 3D star-shaped acceptor based on triphenylamine as a core and diketopyrrolopyrrole as arms (S(TPA-DPP)) was synthesized. S(TPA-DPP) exhibited excellent thermal stability, strong absorption, and very high open-circuit voltage (1.18 V) in solution-processed organic solar cells based on P3HT:S(TPA-DPP).     

Synthesis of new nanocrystal-polymer nanocomposite as the electron acceptor in polymer bulk heterojunction solar cells

A hydroxyl-coated CdSe nanocrystal (CdSe-OH) and a CdSe-polymer nanocomposite were synthesized and used as the electron acceptors in polymer solar cells (PSCs). The CdSe-polymer composite was prepared via atom transfer radical polymerization (ATRP) of N-vinylcarbazole on functionalized CdSe quantum dots. Physical properties and photovoltaic characteristics of the CdSe-poly(N-vinylcarbazole) (CdSe-PVK) nanocomposite have been investigated. Thermogravimetric analysis (TGA) results displayed higher thermal stability for CdSe-PVK nanohybrid in comparison with the linear-type PVK polymer. Differential scanning calorimetry (DSC) studies indicated that CdSe-PVK had a lower glass-transition temperature (T_g) in comparison with PVK due to the branch effect of the star-shaped polymer hybrid. Cyclic voltammetric (CV) measurements were performed to obtain HOMO and LUMO values of PVK and CdSe-PVK. TEM and SEM micrographs exhibited CdSe nanoparticles were well coated with PVK polymer. Both CdSe-OH and CdSe-PVK were blended with poly(3-hexylthiophene) (P3HT) and used as the active layer in bulk heterojunction solar cells. Polymer solar cell based on CdSe-PVK as acceptor revealed that the photovoltaic properties can be significantly improved when PVK polymer chains were grafted on surfaces of CdSe nanocrystals. In comparison with the P3HT:CdSe-OH system, PSC based on P3HT:CdSe-PVK showed an improved power conversion efficiency (0.02% vs. 0.001%). Film topography studied by AFM further confirmed the better device performance was due to the enhanced compatibility between P3HT and CdSe-PVK.     

Non-equivalent D-A copolymerization strategy towards highly efficient polymer donor for polymer solar cells

D-A copolymerization is a broadly utilized molecular design strategy to construct high efficiency photovoltaic materials for polymer solar cells (PSCs),and all the D-A copolymer donors reported till now are the alternate D-A copolymers with equal D-and A-units.Here,we first propose a non-equivalent D-A copolymerization strategy with unequal D-and A-units,and develop three novel non-equivalent D-A copolymer donors (PM6-D1,PM6-D2 and PM6-D3 with D/A unit ratio of 1.1:0.9,1.2:0.8 and1.3:0.7,respectively) by inserting more D units into the alternate D-A copolymer PM6 backbone to finely tune the physicochemical and photovoltaic properties of the polymers.The three non-equivalent D-A copolymers show the down-shifted highest occupied molecular orbital (HOMO) energy levels,higher hole mobility,higher degree of molecular self-assembly and higher molecular crystallinity with the increase of D-unit ratio in comparison with the alternate D-A copolymer PM6.As a result,all the three non-equivalent D-A copolymer-based PSCs with Y6 as acceptor achieve improved power conversion efficiency (PCE)with higher V_(oc),larger J_(sc)and higher FF simultaneously.Particularly,the PM6-D1:Y6 based PSC achieved a high PCE of17.71%,which is significantly higher than that (15.82%) of the PM6:Y6 based PSC and is one of the highest performances in the binary PSCs.     

Organic solar cells based on small molecule donor and polymer acceptor

Small molecule donor/polymer acceptor(SD/PA)-type organic solar cells(OSCs) have attracted widespread attention in recent years due to the continuing power conversion efficiency(PCE) growth, near 10%, and the excellent thermal stability for the practical applications. However, the development of SD/PA-type OSCs lags far behind that of polymer donor/small molecule acceptor(PD/SA)-type OSCs, which are also based on the combination of small molecule and polymer, with the PCEs exceeding 18%. The rea...     

Organic dyes containing a coplanar indacenodithiophene bridge for high-performance dye-sensitized solar cells

A series of new organic dyes exploiting coplanar indacenodithiophene as the central π-spacer of the classical donor-(π-spacer)-acceptor configuration were synthesized and characterized for dye-sensitized solar cells. The coplanarity of the indacenodithiophene core facilitates efficient donor to acceptor charge transfer, imparting the new organic dyes significant bathochromic shifts and remarkable power conversion efficiencies of up to 6.7% (DTInDT) under AM 1.5G radiation.