Enumeration of digraphs with a given automorphism group

Four methods are described for enumerating digraphs with a given automorphism group: (1) a generating-function method based on subduced cycle indices, (2) a generating-function method based on partial cycle indices, (3) a method based on the elementary superposition theorem, and (4) a method based on the partial superposition theorem. All of these methods are based on the concept of unit subduced cycle indices and construct a set of versatile tools for combinatorial enumeration. They are applied to the enumeration of five-vertex digraphs with a given automorphism group. The table of marks and its inverse for the symmetric group of degree 5 are recalled. The table of USCIs of this roup is obtained.Dedicated to Professor Frank Harary.     

Electrochemical impedance characterization and photovoltaic performance of N719 dye‐sensitized solar cells using quaternized ammonium iodide containing polyfluorene electrolyte solutions

This study develops a series of titanium oxide electrode‐based N719 dye‐sensitized solar cells (DSSCs) using quaternized ammonium iodide containing main‐chain and star‐shaped polyfluorene (MPF‐E and SPF‐E) electrolyte solutions. The electrochemical impedance and photovoltaic properties of the polyfluorene electrolyte‐based DSSCs were studied and compared to those of the poly(ethylene oxide) (PEO) electrolyte‐based DSSCs. As with the PEO electrolyte‐based DSSCs, the recombination impedance increased with increase in the polymer content for the MPF‐E electrolyte‐based DSSCs, whereas the photovoltaic performance did otherwise. Nevertheless, the reduction in the photovoltaic properties was not significant for the SPF‐E electrolyte‐based DSSCs. The electrochemical impedance and photovoltaic properties of the different polymer‐based DSSCs are also discussed as a function of the polymer concentration. Copyright © 2010 John Wiley & Sons, Ltd.     

Poly(2,5‐dimercapto‐1,3,4‐thiadiazole) as a Cathode for Rechargeable Lithium Batteries with Dramatically Improved Performance

Organosulfur compounds with multiple thiol groups are promising for high gravimetric energy density electrochemical energy storage. We have synthesized a poly(2,5‐dimercapto‐1,3,4‐thiadiazole) (PDMcT)/poly(3,4‐ethylenedioxythiophene) (PEDOT) composite cathode for lithium‐ion batteries with a new method and investigated its electrochemical behavior by charge/discharge cycles and cyclic voltammetry (CV) in an ether‐based electrolyte. Based on a comparison of the electrochemical performance with a carbonate‐based electrolyte, we found a much higher discharge capacity, but also a very attractive cycling performance of PDMcT by using a tetra(ethylene glycol) dimethyl ether (TEGDME)‐based electrolyte. The first discharge capacity of the as‐synthesized PDMcT/PEDOT composite approached 210 mAh g^?1 in the TEGDME‐based electrolyte. CV results clearly show that the redox reactions of PDMcT are highly reversible in this TEGDME‐based electrolyte. The reversible capacity remained around 120 mAh g^?1 after 20 charge/discharge cycles. With improved cycling performance and very low cost, PDMcT could become a very promising cathode material when combined with a TEGDME‐based electrolyte. The poor capacity in the carbonate‐based electrolyte is a consequence of the irreversible reaction of the DMcT monomer and dimer with the solvent, emphasizing the importance of electrolyte chemistry when studying molecular‐based battery materials.     

Kinetics of electron recombination of dye-sensitized solar cells based on TiO2 nanorod arrays sensitized with different dyes

The performance and electron recombination kinetics of dye-sensitized solar cells based on TiO(2) films consisting of one-dimensional nanorod arrays (NR-DSSCs) which are sensitized with dyes N719, C218 and D205, respectively, have been studied. It has been found that the best efficiency is obtained with the dye C218 based NR-DSSCs, benefiting from a 40% higher short-circuit photocurrent density. However, the open circuit photovoltage of the N719 based cell is 40 mV higher than that of the organic dye C218 and D205 based devices. Investigation of the electron recombination kinetics of the NR-DSSCs has revealed that the effective electron lifetime, τ(n), of the different dye based NR-DSSCs shows the sequence of C218 > D205 > N719. The higher V(oc) with the N719 based NR-DSSC is originated from the more negative energy level of the conduction band of the TiO(2) film. In addition, in comparison to the DSSCs with the conventional nanocrystalline particles based TiO(2) films, the NR-DSSCs have shown over two orders of magnitude higher τ(n) when employing N719 as the sensitizer. Nevertheless, the τ(n) of the DSSCs with the C218 based nanorod arrays is only ten-fold higher than that of the nanoparticles based devices. The remarkable characteristic of the dye C218 in suppressing the electron recombination of DSSCs is discussed.     

Fluorocarbon and Hydrocarbon N‐Heterocyclic (C5–C7) Imidazole‐Based Liquid Crystals

By using three synthetic protocols, a series of fluorocarbon and hydrocarbon N‐heterocyclic imidazole‐based liquid crystals (LCs) and related imidazolium‐based ionic liquid crystals (ILCs) have been prepared. The ring size of the N‐heterocycle and the length of the N‐terminal chain (on the imidazolium unit in the ILCs) were modified, and the influence of these structural parameters on liquid‐crystal phases was investigated by means of polarizing optical microscopy (POM), differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). These new ILCs exhibit a disordered smectic phase (SmA), good thermal stabilities, a broad smectic phase range, a high dipole moment, relatively low melting points, but high clearing points and strong emission fluorescence relative to imidazole‐based LCs. These encouraging results have led us to believe these fluorocarbon and hydrocarbon N‐heterocyclic imidazole‐based LCs and related imidazolium‐based ILCs could be used as new liquid‐crystalline materials.     

Third-order nonlinear optical properties of open-shell supermolecular systems composed of acetylene linked phenalenyl radicals

The third-order nonlinear optical (NLO) properties, at the molecular level, the static second hyperpolarizabilities, γ, of supermolecular systems composed of phenalenyl and pyrene rings linked by acetylene units are investigated by employing the long-range corrected spin-unrestricted density functional theory, LC-UBLYP, method. The phenalenyl based superethylene, superallyl, and superbutadiene in their lowest spin states have intermediate diradical characters and exhibit larger γ values than the closed-shell pyrene based superpolyene systems. The introduction of a positive charge into the phenalenyl based superallyl radical changes the sign of γ and enhances its amplitude by a factor of 35. Although such sign inversion is also observed in the allyl radical and cation systems in their ground state equilibrium geometries, the relative amplitude of γ is much different, that is, |γ(regular allyl cation)/γ(regular allyl radical)| = 0.61 versus |γ(phenalenyl based superallyl cation)/γ(phenalenyl based superallyl radical)| = 35. In contrast, the model ethylene, allyl radical/cation, and butadiene systems with stretched carbon-carbon bond lengths (2.0 ?), having intermediate diradical characters, exhibit similar γ features to those of the phenalenyl based superpolyene systems. This exemplifies that the size dependence of γ as well as its sign change by introducing a positive charge on the phenalenyl based superpolyene systems originate from their intermediate diradical characters. In addition, the change from the lowest to the highest π-electron spin states significantly reduces the γ amplitudes of the neutral phenalenyl based superpolyene systems. For phenalenyl based superallyl cation, the sign inversion of γ (from negative to positive) is observed upon switching between the singlet and triplet states, which is predicted to be associated with a modification of the balance between the positive and negative contributions to γ. The present study paves the way toward designing a variety of open-shell NLO supermolecular systems composed of phenalenyl radical building blocks.     

Synthesis,structure and catalysis/applications of <Emphasis Type="Italic">N</Emphasis>-heterocyclic carbene based on macrocycles

It is well-recognized that N-heterocyclic carbenes (NHCs) ligands have provided a new dimension to the design of catalysts. Macrocyclic molecules are a class of material chemistry and have served as the synthetic hosts, and molecular recognition. In recent years, researchers have moved toward fabricating interlocking molecules with specific structures and properties. Therefore, researchers have developed more macrocycles complex based NHCs with multi-complexation modes that provide more diverse host–guest systems. In this account, this review highlights recent advances on synthesis, structure and applications of NHC based on macrocycles. According to the structure of different macrocycles, the complexes can be divided into four parts: (i) complexes of NHC based on crown ether; (ii) complexes of NHC based on porphyrin; (iii) complexes of NHC based on calixarene; (iv) complexes of NHC based on the other macrocycles. The complexes showed good coordination ability with different metal ions and showed excellent catalyst activity and optical ability.     

FTIR spectroscopic characterization of polyurethane-urea model hard segments (PUUMHS) based on three diamine chain extenders

Six polyurethane-urea model hard segments (PUUMHS) were prepared by a solution method based, respectively, on two isocyanates: 4,4'-methylene-diphenyl-diisocyanate (MDI), 4,4'-methylene-dicyclohexyl diisocyanate (HMDI) and three amine chain extenders: ethylene diamine (EDA), methylene-bis-ortho-chloroaniline (MOCA), 2,4-diamino-3,5-dimethylsuphylchlorobenzene (DDSCB). FTIR was used to study their spectroscopic characterization. The main FTIR bands of the six samples were assigned and compared. It was found that most of N-H and C=O are H-bonded in these PUUMHS. However, the N-H in three MDI based PUUMHS is all in the stronger H-bond state than that in their corresponding HMDI based while the C=O in three HMDI based PUUMHS is all in the stronger H-bond state than that in their corresponding MDI based, respectively. In addition, the order of the H-bond strength in HMDI based PUUMHS is MOCA, DDSCB and EDA whether according to nuN-H or nuC=O band wavenumbers, which is, however, different from that in MDI based PUUMHS. Moreover, the HMDI based PUUMHS shows obvious double amide III bands while the MDI based has only prominent one. The results are discussed according mainly to the different characteristics of the three chain extenders as well as the structure difference between MDI and HMDI.     

Phosphinated phenols from acid‐fragmentation of bisphenols and their unsymmetrical diamine derivatives for copolyimides

Four novel diamines (9–12) were prepared by a two‐step procedure from phosphinated phenols (1–4) that were prepared from acid‐fragmentation of four bisphenols, including bisphenol A, 4,4′‐isopropylidenebis(2,6‐dimethylphenol), cis(4‐hydroxyphenyl)cyclohexane, and 9,9′‐bis(4‐hydroxyphenyl)fluorene, followed by nucleophilic addition of 9,10‐dihydro‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO). Copolyimides based on (9–12) /4,4′‐diaminodiphenyl ether (ODA)/dianhydride were prepared. The structure‐property relationship on the copolyimides was discussed. Due to the structural similarity, (9) /ODA‐based copolyimides were compared with (10) /ODA‐based copolyimides, while (11) /ODA‐based copolyimides were compared with (12) /ODA‐based copolyimides. The dimethyl substitutents cause (10) /ODA‐based copolyimides to display higher T_g, modulus, dimensional stability, contact angle, and better solubility than (9) /ODA‐based copolyimides. (12) /ODA‐based copolyimides that exhibit fluorene moieties display higher T_g and thermal stability, but a lower contact angle and poorer solubility than (11) /ODA‐based copolyimides that exhibit cyclohexane moieties. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 390–400     

有机钙作用下褐煤SO2、NO析出及燃烧特性

在管式炉上研究了醋酸调制白云石产物、醋酸钙、丙酸钙等有机钙作用下龙口褐煤燃烧时SO₂、NO的析出特性,并在热分析系统上考察了相应的燃烧特性。合适的工况条件下有机钙能有效抑制SO₂、NO的析出。在973~1 273 K下,有机钙均能有效抑制SO₂的析出,而当温度继续升高,除醋酸钙外,其他有机钙抑制效果下降。在973~1 173 K时,有机钙促进了NO的析出,而当温度高于1 173 K时,醋酸钙和丙酸钙的抑制效果明显。随着钙硫比的增加,有机钙对SO₂、NO抑制效果普遍增强,而醋酸调制白云石产物在钙硫比为2.0~2.5时却促进NO的析出。当钙硫比为2.0时,褐煤着火性能明显提高,着火点降低10~33 K,但其燃尽时间稍有延长。     

Producing 13C NMR, infrared absorption, and electron ionization mass spectrometric data models of the monodechlorination of chlorobenzenes, chlorophenols, and chloroanilines

We have developed four spectroscopic data-activity relationship (SDAR) models of monodechlorination of 32 chlorinated benzene compounds in anaerobic estuarine sediment. The SDAR models were based on combinations of 13C nuclear magnetic resonance (NMR), infrared absorption (IR), and electron ionization mass spectrometric (EI MS) data. The SDAR models segregated the 32 compounds into 17 readily monodechlorinated compounds and 15 not readily monodechlorinated compounds. The SDAR model based on 13C NMR, IR, and EI MS data gave a leave-one-out cross-validation of 93.8%. The SDAR model based on a composite of 13C NMR and IR data gave a leave-one-out cross-validation of 90.6%. The SDAR model based on a composite of IR and EI MS data gave a leave-one-out cross-validation of 84.4%. The SDAR model based on a composite of 13C NMR and EI MS data gave a leave-one-out cross-validation of 84.4%. These reliable SDAR models provide a rapid and simple way to predict whether a chlorinated benzene compound will readily go through monodechlorination. The FDA has filed a patent application on methods of using any combination of spectral data (NMR, MS, UV-vis, IR, and fluorescence, phosphorescence) to model a chemical, physical, or biological endpoint.     

Total Synthesis of Bryostatin 8 Using an Organosilane‐Based Strategy

Convergent total synthesis of bryostatin 8 has been accomplished by an organosilane‐based strategy. The C ring is constructed stereoselectively through a geminal bis(silane)‐based [1,5]‐Brook rearrangement, and the B ring through geminal bis(silane)‐based Prins cyclization, thus efficiently joining the northern and southern parts of the molecule.     

Drug Conjugation to Cyclic Peptide–Polymer Self‐Assembling Nanotubes

We show for the first time how polymeric nanotubes (NTs) based on self‐assembled conjugates of polymers and cyclic peptides can be used as an efficient drug carrier. RAPTA‐C, a ruthenium‐based anticancer drug, was conjugated to a statistical co‐polymer based on poly(2‐hydroxyethyl acrylate) (pHEA) and poly(2‐chloroethyl methacrylate) (pCEMA), which formed the shell of the NTs. Self‐assembly into nanotubes (length 200–500 nm) led to structures exhibiting high activity against cancer cells.     

Truxene-based Hole-transporting Materials for Perovskite Solar Cells

Three star-shaped truxene-based small molecules(namely TXH,TXM,TXO) were synthesized,characterized and used as hole-transporting materials(HTMs) for perovskite solar cells(Pv SCs). The device based on TXO delivered a respectable power conversion efficiency(PCE) of 7.89% and a high open-circuit voltage(Voc) of 0.97 V,which far exceeded the values of the devices based on other two small molecules. The highest PCE for the device based on TXO is mainly contributed from its lowest series resistance(Rs) value and largest short-circuit current(Jsc) value under the same circumstances. All these results indicate that TXO is a promising HTM candidate for Pv SCs.     

Silicone‐based impact modifiers for poly(vinyl chloride), engineering resins,and blends

Silicone‐based impact modifiers were prepared in a previous study. The modifiers were composed of silicone/acrylic rubber cores and grafted acrylic shells. They improved the toughness of poly(vinyl chloride) (PVC) and poly(methyl methacrylate). The silicone emulsion that was used to produce the silicone‐based impact modifiers was prepared via two routes: emulsion polymerization and bulk polymerization of octamethyltetracyclosiloxane. Many silicone‐based impact modifiers were produced that had different silicone/acrylic rubber characteristics. Through a toughness examination of modified PVC, the best composition of the silicone‐based impact modifiers was obtained, and the silicone content in the rubber composition was 25 wt %. The morphology of the silicone‐based impact modifiers, determined by transmission electron microscopy, was as follows: core and second shell polymers were mainly poly(butyl acrylate), and the first shell polymer was silicone. The silicone‐based impact modifiers were blended with engineering resins such as PVC, polycarbonate (PC), poly(butylene terephthalate) (PBT), and PC/PBT mixtures. The impact strength under standard conditions and after weathering test conditions for blends of the silicone‐based impact modifiers were investigated with respect to two commercially available acrylic and methyl methacrylate/butadiene/styrene impact modifiers. The results showed good weatherability and good toughness under low‐temperature conditions for the silicone‐based impact modifiers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1112–1119, 2004     

Preparation and thermal characterisation of poly(lactic acid) nanocomposites prepared from organoclays based on an amphoteric surfactant

New polymer-clay nanocomposites composed of poly(lactic acid) and a novel organoclay based on cocamidopropylbetaine (CAB) and sodium montmorillonite (MMT) were prepared by solution casting and characterised by X-Ray Diffraction Analysis (XRDA), Transmission Electron Microscopy (TEM) and Thermogravimetric Analysis (TGA). A similar series of composites based on PLA and Cloisite 30B, a commercially available organoclay, were prepared for comparison. The thermal stability of the CAB-MMT organoclays decreased with increasing surfactant loading. Experimental organoclays with an organic content similar to that of the commercial organoclay were found to be of comparable thermal stability. XRDA analysis of the PLA-organoclay nanocomposites showed that PLA intercalated the gallery space of both types of organoclay to similar extents and the increased spacing was confirmed by TEM. The thermal stabilities of the PLA-organoclay composites based on CAB-MMT were higher than those based on the commercial organoclay.     

Chemical interpretation of molecular electron density distributions

In this study, the two small molecules HS(CH)(CH(2)), 1, and F(CH)(4)F, 2, are presented, which yield different chemical interpretations when one and the same density is interpreted either by means of Natural Bond Orbital and subsequent Natural Resonance Theory application or by the Quantum Theory of Atoms In Molecules. The first exhibits a S-C bond in the orbital based approach, whereas the density based Quantum Theory of Atoms In Molecules detects no corresponding bond. In F(CH)(4)F a F...F bond is detected in the density based approach, whereas in the orbital based approach no corresponding bond is found. Geometrical reasons for the presence of unexpected and the absence of expected bond critical points are discussed.     

A Novel Biodegradable Carboxy‐Functional Lactose Copolymer

The synthesis of the first lactose main‐chain copolymer was achieved by means of solution polyreaction of ethylenediaminetetraacetic acid dianhydride with D ‐lactose. The water‐soluble carboxy‐functional material based on EDTA with a high molar mass is shown to be biodegradable. The metal complexing properties of the polymer based on the liquid‐phase polymer‐based retention (LPR) method showed a strong interaction with Cr(III), Fe(III), and Sr(II) ions.     

Liquid crystal nose,chiral case: towards increased selectivity and low detection limits

In this paper, we describe a simple prototype of an olfaction system based on chiral liquid crystals (LCs) and suitable for sensing volatile organic compounds (VOCs). The detection of small concentrations of VOCs is based on measuring weak colour fluctuations on the surface of the LC droplet. Detection of larger concentrations is based on measuring colour changes (or shift of the selective reflection band) and isotropisation transition of the whole droplet. Thus, a broad range of VOC concentrations can be detected by this LC nose.