Non-empirical calculations of NMR indirect carbon-carbon coupling constants. Part 6: propellanes

A full set of carbon-carbon coupling constants have been calculated at the SOPPA level in the series of six most representative propellanes. Special attention was focused on spin-spin couplings involving both bridgehead carbons, and these data were rationalized in terms of the multipath coupling mechanism and hybridization effects. Many unknown couplings in the propellane frameworks were predicted with high reliability.     

Non‐empirical calculations of NMR indirect carbon–carbon coupling constants. Part 4: Bicycloalkanes

A systematic study of the one‐bond and long‐range J(C,C), J(C,H) and J(H,H) in the series of nine bicycloalkanes was performed at the SOPPA level with special emphasis on the coupling transmission mechanisms at bridgeheads. Many unknown couplings were predicted with high reliability. Further refinement of SOPPA computational scheme adjusted for better performance was carried out using bicyclo[1.1.1]pentane as a benchmark to investigate the influence of geometry, basis set and electronic correlation. The calculations performed demonstrated that classical ab initio SOPPA applied with the locally dense Dunning's sets augmented with inner core s‐functions used for coupled carbons and Sauer's sets augmented with tight s‐functions used for coupled hydrogens performs perfectly well in reproducing experimental values of different types of coupling constants (the estimated reliability is ca 1–2 Hz) in relatively large organic molecules of up to 11 carbon atoms. Additive coupling increments were derived for J(C,C), J(C,H) and J(H,H) based on the calculated values of coupling constants within SOPPA in the model bicycloalkanes, in reasonably good agreement with the known values obtained earlier on pure empirical grounds. Most of the bridgehead couplings in all but one bicycloalkane appeared to be essentially additive within ca 2–3 Hz while bicyclo[1.1.1]pentane demonstrated dramatic non‐additivity of ?14.5 Hz for J(C,C), +16.6 Hz for J(H,H) and ?5.5 Hz for J(C,H), in line with previous findings. Non‐additivity effects in the latter compound established at the SOPPA level should be attributed to the through‐space non‐bonded interactions at bridgeheads due to the essential overlapping of the bridgehead rear lobes which provides an additional and effective non‐bonding coupling path for the bridgehead carbons and their protons in the bicyclopentane framework. Copyright © 2003 John Wiley & Sons, Ltd.     

Resolving an apparent discrepancy between theory and experiment: spin-spin coupling constants for FCCF

Ab initio equation of motion coupled cluster singles and doubles (EOM-CCSD) and second-order polarization propagator approximation (SOPPA) calculations have been performed to evaluate spin-spin coupling constants for FCCF (difluoroethyne). The computed EOM-CCSD value of (3)J(F-F) obtained at the experimental geometry of this molecule supports the previously reported experimental value of 2.1 Hz, thereby resolving an apparent discrepancy between theory and experiment. This coupling constant exhibits a strong dependence on the C-C and C-F distances, and its small positive value results from a sensitive balance of paramagnetic spin-orbit (PSO) and spin-dipole (SD) terms. The three other unique FCCF coupling constants (1)J(C-C), (1)J(C-F), and (2)J(C-F) have also been reported and compared with experimental data. While (1)J(C-F) is in agreement with experiment, the computed value of (2)J(C-F) is larger than our estimate of the experimental coupling constant.     

Non-empirical calculations of NMR indirect carbon-carbon coupling constants. Part 7--spiroalkanes

Carbon-carbon spin-spin coupling constants were calculated at the SOPPA level for a series of seven classical spiroalkanes, spiro[2.2]pentane, spiro[2.3]hexane, spiro[2.4]heptane, spiro[2.5]octane, spiro[3.3]heptane, spiro[4.4]nonane and spiro[5.5]undecane, with special focus upon couplings involving and/or across spiro carbons. Many interesting structural trends were investigated originating in specific geometries and unusual bonding environments at the spiro carbon.     

The absolute sign of J coupling constants determined using the order matrix calculation

A novel methodology using the order matrix calculation to determine the absolute sign of spin-spin couplings based on the structure of organic compounds is presented. The sign of the residual dipolar coupling (RDC) depends on the sign of corresponding scalar spin-spin coupling constant and the sign of the RDC has a dramatic influence on the order matrix calculation. Therefore, the sign of the spin-spin coupling constant can be obtained by an order matrix calculation through the corresponding RDC. Six types of spin-spin coupling constants, including 2J(H,H), 1J(C,F), 2J(C,F), 3J(C,F), 2J(F,H) and 3J(F,H), were obtained simultaneously. Except for 3J(C,F) where the measured RDCs have very small magnitudes, the signs were determined unambiguously.     

Non-empirical calculations of NMR indirect carbon-carbon coupling constants. Part 11--saturated carbocycles: a reference data set and a practical guide to structural elucidation

Carbon-carbon spin-spin coupling constants, J(C,C), calculated at the SOPPA level for 50 mono-, bi- and polycycloalkanes in 10 previous papers are put in order and discussed on unified grounds. Basic structural trends of J(C,C) established in the original publications are summarized and briefly outlined for the representative series. Many unknown couplings are predicted with high reliability, and this provides a good reference data set and a practical guide to the structural elucidation of saturated carbocycles by means of J(C,C) coupling constants.     

29Si-13C spin-spin couplings over an Si-O-Csp3 link

(29)Si-(13)C spin-spin couplings over one, two, and three bonds as well as other NMR parameters [delta((29)Si), delta((13)C), delta((1)H), (1)J((13)C-(1)H), and (2)J((29)Si-C-(1)H)] were calculated and measured for a series of trimethylsilylated alcohols of the types Me(3)Si-O-(CH(2))(n)CH(3) and Me(3)Si-O-CH(3-n)R(n)(n = 0-3; R = Me, Ph, or Vi). The signs of the coupling constants determined for selected compounds can likely be extended to all such compounds, as supported by theoretical calculations. Similar to couplings between other pairs of nuclei, the 2-bond and 3-bond (29)Si-O-(13)C couplings are of opposite signs ((2)J > 0 and (3)J < 0), and their relative magnitudes depend on the extent of branching at the alpha-carbon.     

Fluorine spin–spin coupling constants of pentafluorobenzene revisited at the ab initio correlated levels

All possible spin–spin coupling constants, ¹⁹F–¹⁹F, ¹⁹F–¹³C, and ¹⁹F–¹H, of pentafluorobenzene were calculated at five different levels of theory, HF, DFT, SOPPA (CCSD), CCSD, and the SOPPA (CCSD)-based composite scheme with taking into account solvent, vibrational, relativistic, and correlation corrections. Most corrections were next to negligible for the long-range couplings but quite essential for the one-bond carbon–fluorine coupling constants. Hartree–Fock calculations were found to be entirely unreliable, while DFT results were comparable in accuracy with the data obtained using the wave function-based methods.     

Non-empirical calculations of NMR indirect spin-spin coupling constants. Part 13: configurational assignment of aminosulfonylamidines

Carbon-carbon coupling constants have been experimentally measured using the INADEQUATE pulse sequence in the series of N-[1,2-bis(dialkylamino)-2-arylethylidene]arylsulfonamides obtained from N-(1-aryl-2,2,2-trichloroethyl)amides of arylsulfonic acids. Comparison of the experimental J(C,C) in this series with those calculated at the SOPPA (Second-Order Polarization Propagator Approach) level in the model aminosulfonylamidine provided an unambiguous assignment at the C=N bond of the eight-title aminosulfonylamidines to E-configuration, while the unknown J(C,C) couplings in their inaccessible diverse Z isomers have been predicted with high reliability. The established marked difference between J(C,C) of the corresponding carbon-carbon bonds in cis and trans orientations to the nitrogen lone pair in aminosulfonylamidines provides a powerful tool in the configurational assignment at the C=N bond in a wide series of the related systems containing the C=N-SO2R moiety.     

Nonempirical calculations of the one‐bond 29Si–13C spin–spin coupling constants taking into account relativistic and solvent corrections

The computational study of the one‐bond ²⁹Si–¹³C spin–spin coupling constants has been performed at the second‐order polarization propagator approximation (SOPPA) level in the series of 60 diverse silanes with a special focus on the main factors affecting the accuracy of the calculation including the level of theory, the quality of the basis set, and the contribution of solvent and relativistic effects. Among three SOPPA‐based methods, SOPPA(MP2), SOPPA(CC2), and SOPPA(CCSD), the best result was achieved with SOPPA(CCSD) when used in combination with Sauer's basis set aug‐cc‐pVTZ‐J characterized by the mean absolute error of calculated coupling constants against the experiment of ca 2 Hz in the range of ca 200 Hz. The SOPPA(CCSD)/aug‐cc‐pVTZ‐J method is recommended as the most accurate and effective computational scheme for the calculation of ¹J(Si,C). The slightly less accurate but essentially more economical SOPPA(MP2)/aug‐cc‐pVTZ‐J and/or SOPPA(CC2)/aug‐cc‐pVTZ‐J methods are recommended for larger molecular systems. It was shown that solvent and relativistic corrections do not play a major role in the computation of the total values of ¹J(Si,C); however, taking them into account noticeably improves agreement with the experiment. The rovibrational corrections are estimated to be of about 1 Hz or 1–1.5% of the total value of ¹J(Si,C). Copyright © 2014 John Wiley & Sons, Ltd.     

Non‐empirical calculations of NMR indirect carbon–carbon coupling constants: 1. Three‐membered rings

The carbon–carbon indirect nuclear spin–spin coupling constants in cyclopropane, aziridine and oxirane were investigated by means of ab initio calculations at the RPA, SOPPA and DFT/B3LYP levels. We found that the carbon–carbon couplings are by far dominated by the Fermi contact term. Our best SOPPA and DFT results are in a very good agreement with each other and with the experimental values, whereas calculations at the RPA level of theory strongly overestimate the carbon–carbon couplings. Significant differences in the basis set dependence of the calculated carbon–carbon coupling constants obtained with either wavefunction method, RPA or SOPPA, or the density functional method, DFT/B3LYP, are observed. The SOPPA results depend much more strongly on the quality of the basis set than the results of DFT/B3LYP calculations. The medium‐sized core‐valence basis sets cc‐pCVTZ and even cc‐pCVDZ were found to perform fairly well at the SOPPA level for the one‐bond carbon–carbon couplings investigated here. Copyright © 2002 John Wiley & Sons, Ltd.     

Stereochemical dependence of NMR geminal spin-spin coupling constants

In this work it was sought to explore the versatility of geminal spin-spin coupling constants, (2)J(XY) SSCCs, as probes for stereochemical studies. A set of compounds, where their experimental (2)J(XY) SSCCs through the X-C-Y molecular fragment are predicted to be sensitive to hyperconjugative interactions involving either bonding or antibonding orbitals containing the C carbon atom ('coupling pathway'), were analyzed. SSCC calculations were performed for some selected examples using the second order polarization propagator approximation (SOPPA) method or within the DFT-B3LYP framework. Hyperconjugative interactions were calculated within the Natural Bond Orbital (NBO) approach. Results are condensed in two qualitative rules: Rule I(M)-hyperconjugative interactions transferring charge into the coupling pathway yield a positive increase to the Fermi contact (FC), contribution to (2)K(XY) reduced spin-spin coupling constants (RSSCC), and Rule II(M)-hyperconjugative interactions transferring charge from the coupling pathway yield a negative increase to the FC contribution to (2)K(XY) RSSCC.     

Benchmark calculations of 29Si–1H spin–spin coupling constants across double bond

Benchmark calculations of geminal and vicinal ²⁹Si–¹H spin–spin coupling constants across double bond in three reference alkenylsilanes have been carried out at both DFT and SOPPA levels in comparison with experiment. At the former, four density functionals, B3LYP, B3PW91, PBE0 and KT3, were tested in combination with five representative basis sets. At the latter, three main SOPPA‐based methods, SOPPA, SOPPA(CC2) and SOPPA(CCSD), were examined in combination with the same series of basis sets. On the whole, the wavefunction methods showed much better results as compared to DFT, with the most efficient combination of SOPPA/cc‐pVTZ‐su2 characterized by a mean absolute error of only 0.4 Hz calculated for a set of nine coupling constants in three compounds with a sample span of around 40 Hz. Copyright © 2012 John Wiley & Sons, Ltd.     

Correlated calculations of indirect nuclear spin-spin coupling constants using second-order polarization propagator approximations: SOPPA and SOPPA(CCSD)

We present correlated calculations of the indirect nuclear spin-spin coupling constants of HD, HF, H₂O, CH₄, C₂H₂, BH, AlH, CO and N₂ at the level of the second-order polarization propagator approximation (SOPPA) and the second-order polarization propagator approximation with coupled-cluster singles and doubles amplitudes – SOPPA(CCSD). Attention is given to the effect of the so-called W ₄ term, which has not been included in previous SOPPA spin-spin coupling constant studies of these molecules. Large sets of Gaussian basis functions, optimized for the calculation of indirect nuclear spin-spin coupling constants, were used instead of the in general rather small basis sets used in previous studies. We find that for nearly all couplings the SOPPA(CCSD) method performs better than SOPPA. Received: 6 July 1998 / Accepted: 8 September 1998 / Published online: 23 November 1998     

Structural trends of 77Se?1H spin–spin coupling constants and conformational behavior of 2‐substituted selenophenes

Experimental measurements and second‐order polarization propagator approach (SOPPA) calculations of ⁷⁷Se? ¹H spin–spin coupling constants together with theoretical energy‐based conformational analysis in the series of 2‐substituted selenophenes have been carried out. A new basis set optimized for the calculation of ⁷⁷Se? ¹H spin–spin coupling constants has been introduced by extending the aug‐cc‐pVTZ‐J basis for selenium. Most of the spin–spin coupling constants under study, especially vicinal ⁷⁷Se? ¹H couplings, demonstrated a remarkable stereochemical behavior with respect to the internal rotation of the substituent in the 2‐position of the selenophene ring, which is of major importance in the stereochemical studies of the related organoselenium compounds. Copyright © 2009 John Wiley & Sons, Ltd.     

Divinyl selenide: conformational study and stereochemical behavior of its 77Se-1H spin-spin coupling constants

Theoretical energy-based conformational analysis of divinyl selenide performed at the MP2/6-311G** level is substantiated by the second-order polarization propagator approach (SOPPA) calculations and experimental measurements of its (77)Se-(1)H spin-spin coupling constants, demonstrating marked stereochemical behavior in respect of the internal rotation of both vinyl groups around the Se-C bonds. Based on these data, divinyl selenide is shown to exist in an equilibrium mixture of three nonplanar conformers: one the preferred syn-s-cis-s-trans and two minor anti-s-trans-s-trans and syn-s-trans-s-trans forms.     

Configurational assignment of N-arylsulfonylimines of alpha-polychloroaldehydes

Configurational assignment of seven synthesized N-arylsulfonylimines of alpha-polychloroaldehydes has been carried out by means of experimental measurements and high-level ab initio calculations of their (13)C--(13)C, (13)C--(1)H and (15)N--(1)H spin-spin coupling constants. The title compounds were shown to exist in solution solely in the form of E isomers, in line with thermodynamic reasoning.     

Unexpected geometrical effects on paramagnetic spin-orbit and spin-dipolar 2J(FF) couplings

The second-rank tensor character of the paramagnetic spin-orbit and spin-dipolar contributions to nuclear spin-spin coupling constants is usually ignored when NMR measurements are carried out in the isotropic phase. However, in this study it is shown that isotropic (2)J(FF) couplings strongly depend on the relative orientation of the C-F bonds containing the coupling nuclei and the eigenvectors of such tensors. Predictions about such effect are obtained using a qualitative approach based on the polarization propagator formalism at the RPA, and results are corroborated performing high-level ab initio spin-spin coupling calculations at the SOPPA(CCSD)/EPR-III//MP2/EPR-III level in a model system. It is highlighted that no calculations at the RPA level were carried out in this work. The quite promising results reported in this paper suggest that similar properties are expected to hold for the second-rank nuclear magnetic shielding tensor.     

Indirect NMR spin-spin coupling constants 3J(P,C) and 2J(P,H) across the P-O...H-C link can be used for structure determination of nucleic acids

Calculated indirect NMR spin-spin coupling constants (3)J(P,C) and (2)J(P,H) were correlated with the local structure of the P-O...H-C linkage between the nucleic acid (NA) backbone phosphate and the H-C group(s) of a nucleic acid base. The calculations were carried out for selected nucleotides from the large ribosomal subunit (Ban et al. Science 2000, 289, 905) with the aim of identifying NMR parameters suitable for detection of certain noncanonical RNA structures. As calculations in the model system, dimethyl-phosphate-guanine, suggest, the calculated indirect spin-spin couplings across the linkage are sensitive to the mutual orientation and distance between the phosphate and nucleic acid base. A short distance between the nucleic acid base and phosphate group and the angles C...P-O and P...C-H smaller than 50 degrees are prerequisites for a measurable spin-spin interaction of either coupling (|J| > 1 Hz). A less favorable arrangement of the P-O...H-C motif, e.g., in nucleotides of the canonical A-RNA, results in an effective dumping of both spin-spin interactions and insignificant values of the NMR coupling constants. The present work indicates that quantum chemical calculations of the indirect spin-spin couplings across the P-O...H-C motif can help detect some rare but important backbone topologies, as seen for example in the reverse kink-turn. Measuring of (3)J(P,C) and (2)J(P,H) couplings can therefore provide critical constraints on the NA base and phosphate geometry and help to determine the structure of NAs.     

Density functional theory study of indirect nuclear spin-spin coupling constants with spin-orbit corrections

This work outlines the calculation of indirect nuclear spin-spin coupling constants with spin-orbit corrections using density functional response theory. The nonrelativistic indirect nuclear spin-spin couplings are evaluated using the linear response method, whereas the relativistic spin-orbit corrections are computed using quadratic response theory. The formalism is applied to the homologous systems H2X (X=O,S,Se,Te) and XH4 (X=C,Si,Ge,Sn,Pb) to calculate the indirect nuclear spin-spin coupling constants between the protons. The results confirm that spin-orbit corrections are important for compounds of the H2X series, for which the electronic structure allows for an efficient coupling between the nuclei mediated by the spin-orbit interaction, whereas in the case of the XH4 series the opposite situation is encountered and the spin-orbit corrections are negligible for all compounds of this series. In addition we analyze the performance of the density functional theory in the calculations of nonrelativistic indirect nuclear spin-spin coupling constants.